Construction of 132 KV and 33 KV bay for 40 MVA Transformer at 132 KV sub station Iglas under ETD I Aligarh

Amount

Supply

PG Clamp Moose to Moose

PG Clamp Moose to Panther

PG Clamp Panther to Panther

Copper Bond

Bus Post Clamp for Moose

Single tension fitting suitable for ACSR panther conductor

Single Suspension fitting suitable for ACSR panther conductor

Erection

Carriage of following material from Electricity Febrication Unit, Naini, Prayagraj to 132 KV S/S Iglas under ETD-I, Aligarh (AXM-2 set, ALP-22 set, BCT-06 set, BBL-02 set, BTI-01 set & ABL-11 set) (Total=10.69 MT). All T&P man power & vehicle will be arranged by contractor at his own cost (Distance approximate 600 Km.).

Proper/ safe loading of different structure material by sorting them at Electricity Febrication Unit, Naini, Prayagraj. All T&P man power & vehicle will be arranged by contractor at his own cost. (AXM-2 set, ALP-22 set, BCT-06 set, BBL-02 set, BTI-01 set & ABL-11 set) (Total=10.69 MT)

Proper /safe un-loading of different structure material by sorting them at 132 KV S/S Iglas Aligarh. All T&P man power & vehicle will be arranged by contractor at his own cost. (AXM-2 set, ALP-22 set, BCT-06 set, BBL-02 set, BTI-01 set & ABL-11 set) (Total=10.69 MT)

Erection of Main and auxiliary structure consisting of columns, beams, peaks, masts etc. and auxiliary structure required for installation of Isolators, C.Ts. P.Ts., L.As. and other equipments. The job consists of shifting of structure parts from store to site of erection, erection of structure as per relevant drawing and practices using flat and spring washer with each bolt .Matching of holes , cutting, matching of members if required shall also be done by the contractor without any extra cost to complete the work satisfactorily. All material, water/ electricity shall be supplied by UPPTCL free of cost but all men ,material and T&P required for satisfactorily completion of work shall be arranged by the contractor at his own cost.

Erection of following equipments as per Instruction manual of various equipments and technical specifications including shifting of material/equipment from store to erection site including all other associated work to complete the job satisfactorily

145KV Circuit breaker

145KV Current transformer (CTs)

145KV Potential transformer (PTs)

145KV Bus Isolator

145KV Tandem Isolator

145KV Post insulator

120KV Lightning Arrester

132 KV Transformer C&R panel

36KV Vaccum Circuit breaker

36KV Current Transformer

36KV Bus Isolator

30KV Lightning Arrester

Junction Box for 132 KV CT

Junction Box for 132 KV PT

Junction Box for 33 KV CT

Apex meter or Panel

Cutting straightening, bending, laying 700mm./ 500mm below in side ground and above ground of following size of M.S. Flat for earthing of main and auxiliary structure, equipment structure, T/F body and its neutral etc. including welding with main earthmat and with object to be earthed , excavaction of trenches ,its back filling, painting and all other associated work as required to complete the work satisfactorily, excluding the cost of M. S. Flat.

To provide grid for earthing of 120 KV & 33 KV LAs including fabrication of 6 no. 3.00 Mt. long electrodes, their placing 500 mm below ground level, interconnections using 75x10 mm MS flat.

Interconnection of bay equipments and bus bar including cutting, bending of conductor and jumpering, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specification

132 KV Jack Bus

132KV Side Transformer Bay - 1xPanther

33KV Side Transformer - 2xMoose

33KV Side jack bus isolator to jack bus - 1xPanther

Designing and submitting of cable schedule and inter connection diagram for 132KV & 33KV bay as per drawing and manuals(to be supplied by Deptt.) for equipments in the control room and switchyard.

Laying of following sizes of control cable in the cable trench from control relay panel to various equipments/ marshalling boxes/J.B. etc. in switch yard as per cable schedule, its saddling at every 75mm. distance with M.S. saddles of size 25x3mm. size including carriage of cable drums from store to laying site and shifting back to store and all other associated work to complete the job satisfactorily as per technical specification.

2Cx2.5 Sq. mm. Unarmoured

4Cx2.5 Sq. mm. Unarmoured

6Cx2.5 Sq. mm. Unarmoured

10Cx2.5 Sq. mm. Unarmoured

Termination of following sizes of cable as laid above as per cable schedule including making necessary holes in glands plates or box wherever required, supply and fixing of cable glands of appropriate size, supply and providing ferrules and Nos. for each core of cable and its termination with crimping type lugs of Dowell/Tension make and all other associated work to complete the jobs satisfactorily as per technical specification.

2Cx2.5 Sq. mm. Unarmoured

4Cx2.5 Sq. mm. Unarmoured

6Cx2.5 Sq. mm. Unarmoured

10Cx2.5 Sq. mm. Unarmoured

Supply & fixing of junction box size 280×225×150 mm made of 10SWG sheet duly powder coated painted and fixed with MS flat clamp, nut-bolt with 1 no. 2Amp. MCB single pole, nutral and 08 number terminal block.

Taking out the above cable from junction box to light fitting fixed over the pole and gantry with fixing clamp of MS flat with each crossed bracing on structure proper dressing with all other associated work to complete the job as per specification including the cost of all material and labour excluding cable.

Providing & fixing of new generation energy & enviornment friendly long aluminum outdoor beam Street light with high power 120W LEDs as light source & exclusively designed polycarbonate cover along with electronic driver complete fitting suitable for 220 Volt AC input supply of IS make or CGL/Havells/Philips with 2 year warranty after the date of installation Standard brand etc.

Supply & fixing of G.I. pipe bracket made of 40mm dia GI pipe 01 number with one band and total length of 850mm having single arm with required M.S. Clamp and Nuts and bolts suitable for fixing LED street light fitting.

Erection of S/S Transformer with all termination of all cable , Connectors with fuse set with double earthiung

Laying of power cable 300 SQMM 4 Core in the cable trench from ACDB panel to 33/.415 S/S Transformer in switch yard as per cable schedule.

Terminatiom and provding of suitable lugs both side of power cable 300 SQMM 4 Core in the switchyard and ACDB Panel as per cable schedule.

Loading/unloading/Shifting of 300 SQMM 4 Core power cable from 132 KV S/S Boner to 132 KV S/S Iglas. (Dist- 30 Km)

Dismantalling & other associated works

Dismantalling of 33/.415 KV Station transformer bay transformer and opening of power cable termination at switchyard & control room

Shifting of substation transformer and accessories at new plinth and removal of old power cable from switchyard to store with proper wrapping 132 KV S/S Iglas.

Shifting of Fire bucket hut and accessories at new foundation location 132 KV S/S Iglas.

M/S KUMAR CONSTRUCTION COMPANY

Hi-tech power transmission