REPAIRS/REPLACEMENT TO ROOF SHEETS, ROOF TRUSS, LEAKAGE/SEEPAGE, RCC ROOF, DOOR, WINDOWS, VENTILATIONS AND SANITARY FITTINGS AND APPLIANCE, HDPE TANKS,CONCRETE TANKS INCLUDING CLEANING OVERHEAD SERVICES TANKS AT WNC (O) MESS, IMSC AND CERTAIN OTHER B

Amount

Note: (i) The rate should be coated considering the high rise nature of building (G+7) and above and necessary scaffolding and safety precaution. (ii) Entire building to be covered with green cloth on MS scafolding upto 7th floor and above and necessary precaution sign board to be placed around the building before commencement and completiom of work. (iii) Debris removeed outside MOD Land.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof /wall coverings

Material & labour for pre-painted hot-dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor for height of building exceeding 10 metres but not exceeding 20 metres complete all as specified and as directed.

Material & labour for pre-painted hot-dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in ridge/ valley/ gutter fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor for height of building exceeding 10 metres but not exceeding 20 metres complete all as specified and as directed.

Material & labour for 1.25 mm thick plain, black galvanised steel sheet as in ridges, hips, valley gutters,drip and straight flashings (length and girth as fixed) and Valley gutters fixed with rivets or other suitable arrangements over including MS brackets Trapezoidal shape of required profile with desired slope etc complete all as specified and as directed by Engr-in-Charge.

Dismantling wrought iron or mild steel complete all as specified and as directed

Supply & fixing MS sections as in ismc,angle, main and cross beams, hip and jack rafters; purlins,grill gritting,rolled section where connected to common rafters and running rails and guides for truss/colume/ staircase/ladder/anchor bolte for colums/base plates/ gussate pltes, wind tie, etc including cutting welding etc; fixed with angle cleats or other connecting plates complete all as specified and directed.

Material & labour for preparing new or previously untreated steel surface of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Material & labour for preparation of old painted surfaces of steel any description over 10 cms width or girth and applying one finishing coat of synthetic enamel paint on steel surfaces complete all as specified and directed.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by the Engr-in-Charge

Material & labour for PCC 1:7:12 type F2 using 40 mm graded stone aggregate as in filling (sunken portion). etc.

Material & labour for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate, mixed with WPC @ 2% by wt. of cement, as sub floor, 40mm thick. (WPC will be measured and paid separately.)

Material & labour for providing 12 mm dia holes of 75mm deep @0.6 m c/c at junction of beams,sunken ares and columns as co-ordinal points for inserting/pouring mixture of resin base latex polymer and cement slurry by pressure grouting for column, beams and slabs, includind sealing the holes with CM 1:3, all as specified and as directed by EIC.

Material & labour for water proofing treatment of sunken floor/wall surfaces by applying two coats of elastomeric coatings of BRUSHBOND RSX in FOSROC or TECKFORCE 2K STRONG in CHOWKSEY CHEMICALS or technocommercial equivalent make given in Appx B, as a two component flexible elastomeric coating with minimum 2mm thickness layer complete all as per manufacture's instructions and as directed.

Material & labour for epoxy base joint paint such as on external surfaces of walls to fill the cracks with and including resin and hardner in proportion as per manufacturers instructions complete all as specified and as directed

Material & labour for preparation of old wall surfaces of any description & applying two coats of acrylic (antifungal) exterior grade paint on wall/roof complete all as specified and directed

Supply & fixing MS flat iron wind ties and stays for gutter including securing with bolts and all necessary drilling bolting or riveting etc. conforming to Fe 410-0 or FE 310-0 Complete all as specified and directed.

Chipping removing carefullly concrete work by low impact hammer ,breakar without damaging the structure & cleaning and disposal of debries out side the premises etc.complete as directed by Engr-in-Charge. Hard concrete should not be removed by force.

Material & labour for Clean existing reinforcement with wire/ rotary wire brush, making the surfaces free from loose material dirt etc. complete and applying two coats of alkaline rust converting primer FEOVERT of Krishna Conchem or Roff rust cleaner of Piddilite or Dr. Fixit Rust removal or ShaliRust of STP Ltd. or technocommercial equivalent on the rebars, including cleaning the reinforcement, wirebrushing to remove loose rust spalls, wash the rebars with clean water within 3 min and wipe it dry.

Material & labour for applying two coats of Epoy based Zinc primer in a span of four hours over the treated rebars and allow to dry for six hours. The application shall be by brush. Epoxy primer for steel of make / brand - Corroseal-ZR of Krishna Conchem or Dr. Fixit Epoxy zinc primer or technocommercial equivalent

Material & labour for cleaning all loose laitance on the concrete substrate and applying one coat of epoxy bonding agent on exposed concrete surface to ensure bond between old concrete & new concrete by brush application. Make / brand Monobond SBR of Krishna Conchem or Dr. Fixit epoxy bonding agent or Shalicrete URP of STP Ltd or technocommercial equivalent

Material & labour for rendering minimum 20mm thick polymer modified mortar in cemet mortar (1:3) with graded quartz sand with additive Monolith - PMM of Krishnaconchem or polymer mortar HB of Dr. Fixit or Shalifix RM SG 01 of STP Ltd. or technocommercial equivalent, 15% by weight of cement in one coat with and including curing as per manufacturer's instruction complete all as specified and as directed

Material & labour for Providing and applying water tight jacketing around columns with M30 grade micro concrete including all lifts, shuttering, drilling holes and fixing shear anchor as per specification complete. Make or brand Micro concrete of Dr. Fixit, Shalicrete URP of STP Ltd. , Epibond-21-LP, EPCO -KP-HP-250 of Krishna Conchem or technocommercial equivalent Note: Reinforcement shall be measured and paid separately.

Material & labour for applying concrete protection coating on finished structural members exposed to atmosphere make or brand IPNET of Krishna Conchem or New Coat from Dr. Fixit or technocommercial equivalent complete all as specified and directed.

Material & labour for Drilling and fixing Rohibb Teflon nozzles in RCC members, including drilling holes of 12mm dia, 50 to 100mm deep holes. Works shall be carried out as under :- (i) Cleaning of holes. Clean the holes by air blower prior to fixing nozzles. (ii) Fixing of nozzles. Insert 12mm dia. Rohibb Teflon nozzles in cleaned holes. External end of nozzles to be machine to receive outlet of grouting gun.Fix it inside the holes by applying thixotropic epoxy putty to ensure complete sealing. Cure the system for min.12 hrs. (iii) Cutting of nozzles. Cut the nozzles by chisel after completion of grouting without damaging structural elements. (iv) In case crack upto 2mm wide, fix the injection nozzels directly over the cracks, at intervals of 6 to 9 inches, using a drilling machine. Fix PVC/MS nozzels in these holes with fast-setting epoxy putty & let it dry for 2 to 3 days. Also, seal the crack between the ports with epoxy putty. (v) In case where the crack is wider than 2mm upto 4 to 5mm, drill holes at the sides of the crack in a staggered fashion, at intervals of 6 inches and affix them with epoxy putty as mentioned above. (vi) Also, seal the face of the carck with a liberal application of the epoxy putty.

Material & labour for Injecting of site mixed cement slurry grout, mixed in specified proportion containing cement, sand water with addition of plasticizers (approved make) & migratory corrosion inhibitors, water cement ratio shall be varied between 0.5 to 1.0 for each hole, shrinkage compensating cement slurry mixed to a lump free fresh creamy consistency ,Mixing shall be done by mechanical mixer continuously stirring mechanically to keep cement particles in suspension. Injection of approved/specified grout by means of pump at a pressure of 3-5 Kg/cm2 etc complete till the grout mix flows out from the nozzle indicating complete filling of grout in the holes drilled. Make / brand of Epoxy grout - Dr. Fixit Epoxy injection or EPCO KP-HP-250 of M/s Krishna Conchem or Shaligrout EI of STP Ltd or technocommercial equivalent

Material & labour for Injecting low viscosity (3-5cps) high molecular weight monomer by pressure and using mechanized injector gun with accessories till nozzles refuses to accept the grout, Including,Mixing of materialas:Mixing of material components(part a&b) in the required quantities as per manufacturer's instruction by weigh batching.Grouting:Fill the grouting gun with concrete penetrating corrosion inhibitor EPCO-KP-100/Protectsil CIT or Ferogard 903 or technocommercial equivalent, maintain desired pressure in the gun by air compressor; maintain the pressureat exit (2 to 3kg/cm2) by monitoring pressure guage at exit.Grout the material through prefixed nozzles in the structural elements@ 100ml per nozzle. Repeat the process for all the nozzles.

Material & labour for Replacement of steel reinforcement with TMT (CRS) bars of appropriate size where 30% of cross section is reduced including dismantling of rusted steel complete all as specified and directed.

Material & labour for Providing and fixing additional main steel bar or stirrupsof designed diameter in various structural elements like column ,beams and foundations including drilling, bending and fixing the bars with epoxy putty etc. complete (Steel provided on the basis of 1% of volume of concrete).

Cleaning the dust, vegetation, sand,dry leaves and other waste material at the rain water pipe of any size and any description, spouts, water outlets of the roofs etc as direcetd and dispose off debris at a distance of 500km and n.exc 1.5 Km including taking down and refixing of existing pipes including necessary fixing arrangements

Taking down cast iron pipes of any size or pattern at any position including all fittings such as bends, heads (measured overall as fixed along the centre line over fiitings and accessories) including rtemoving vegetation groewth around pipes as required, making good to surface to match with eixisting including necessary scaffolding etc complete all as specified and directed.

Material & labour for 100m dia cast iron soil waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints fixed to walls all as specified and directed.

-Ditto- as per Srl item No. 31 above but except pipes. Note:- The old serviceable 100mm bore CI pipe obtained from Srl item No. 31 shall be reused in this item.

Material & labour 75mm bore cast iron soil waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints fixed to walls all as specified and directed.

-Ditto- as per Srl item No. 33 above but except pipes. Note:- The old serviceable 75mm bore CI pipe obtained from Srl item No. 24 shall be reused in this item.

Supply & fixing CI bends (any radius) diminishing pieces or trapers (larger bore measured) fitted with oval access doors of following sizes

75mm dia

100mm dia

-Ditto- all as per srl item No. 35.01 above but except fittings.

-Ditto- all as per srl item No. 35.02 above but except fittings.

Note for Srl item Nos 36 & 37:- The old serviceable bends obtained for item No. 35 shall be re-used.

Supply & fixing CI branch pieces single (equal or unequal) ordinary or inverted ( spigot or socket type) or with parallel branches of following sizes:-

75mm dia

100mm dia

-Ditto- al as per Srl item No. 38 above but double socket of the following sizes:-

75mm dia

100mm dia

-Ditto- all as per srl item No. 38.01 but except fittings

-Ditto- all as per srl item No. 38.01 but except fittings.

Note for Srl item Nos 40 & 41:- The old serviceable bends obtained from item No. 38 shall be re-used in this item.

Taking down eaves gutters and rainwater pipes( any size or pattern) , including all fittings, heads, shoes, bends , swan necks, etc, removal to store (measured overall as fixed along the centre line over fittings and accessories).

Supply & fixing 160mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in wall of approved shape and size approved by GE at any height, any location, with dash through fasteners and rain water bracket suitable for 160mm pipes spacing 1.5 c/c as per CE Navy Mumbai TD/2023/01 including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing for PVC (SWR) bends any radius 110mm bore complete all as specified and as directed

Complete removal of existing water proofing treatment of any description in any position including roof tiles,pcc.brick bat coba,upto any thickness cleaning, wire brushing, watering, removal of debris upto 15km or any distance distance as directed by Engineer-in-charge complete all as specified and as directed

Material & labour PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in roof/chajja padding for maintaining roof/chajja slope complete all as specified and as directed

Material & labour for applying oil bound primer @ 0.40 Litre/Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg/Litre at 25 degree cesius on the prepared dry roof surface and provide and lay 4mm thick APP modifed water proofing membrane reinforced with non-wooven polyster matt with physical properties as given in particular specification. The laying shall got be done through authorized applicator of manufacturer as specified in particular specifications. Provide over the membrane finishing with including Ten years guarantee on prescribed form complete all as per particular specification , manufacturers instructions and as directed by Engineer-in-Charge. Note : Rate inclusive of taking down and re fixing of water tank and existing lightning arrestor system including poviison of new PCC block for damaged PCC block complete as directed by Engineer-in-charge

Material & labour for brushing neat cement slurry with 3Kg of cement per square metre all as specified and directed.

Material & labour for rendering 10 mm thick cement plaster in CM (1:3) on roof top surface finished even and fair including WPC by weight of 3% of total cement content complete all as specified and as directed. Note : WPC will be measured separately

Supply only integral water proofing compound ISI marked

Material & labour for cement concrete tiles 25CmX25CmX22 mm thick, machine pressed,(with grey cement & no pigments), set jointed and pointed in neat cement slurry in floors over and including 15 mm thick bedding layers in CM 1:3. all as specified & directed by engn-in-charge

Material & labour for Cutting chases, pinning in.Stone concrete block or slabe, bricks wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring or water proofing membrane,etc., and making good, cutting not exc 10 cm girth all as specified & directed by engn-in-charge

Material & labour for two coats Dr Fixit 601 Raincoat Dark Base Acrylic Waterproof Coating paint on external surfaces of walls, roof to fill the cracks and cill the joints etc with and including two coats epoxy base resin and hardner in proportion as per manufacturers instructions complete all as specified and as directed

Supply & fixing in repair 75mm dia of outler cast iron nahani trap , with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

Supply & fixing in repairs 100mm dia of outler cast iron nahani trap , with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

Supply & fixing in repair 75mm dia of outler cast iron multy floor trap , with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

Supply & fixing in repairs 100mm dia of outler cast iron multy floor trap , with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

Taking up and down 15 mm bore GI tubing and connection including cleaning for re-fixing or removing to store complete all as specified and directed.

_Ditto_ all as per Sl item No. 58.00 here in before but 20 mm bore complete all as specified and directed.

_Ditto_ all as per Sl item No. 58.00 here in before but 25 mm or 32 mm bore complete all as specified and directed.

Supply & fixing tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors 15 mm bore of pipe complete all as specified and directed.

_Ditto_ all as per Sl item No. 61.00 here in before but 20 mm bore of pipe

_Ditto_ all as per Sl item No. 61.00 here in before but 25 mm bore of pipe

Supply & fixing in repairs vitreous china urinal, half stall type complete including providing andfixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugswith and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, inlet,outlet etc complete all as specified.

Supply & fixing in repairs vitreous china urinals, bowl type (back or corner wall type,) size of 465 x 355 x 265 mm white (minimum),with grating and union for discharge pipe complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugswith and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cisternswith brackets, flush pipes, inlet ,outlet etc complete all as specified.

Supply & fixing 32mm dia PVC waste pipe for WHB and urinals fixed in repairs complete all as specified and directed.

Material & labour for vitrous china urinal partition white of size 310 x 700mm urinal partions slabs, terminating about 40cm above floor, fixed in repairs complete all as specified and directed.

Supply & fixing fixed in repairs Wash hand basin vitreous china (flat back) size 550 x 400 mm including brackets waste brass chromium plated with long screwed shanks and fly nuts 32 mm size including bottle trap complete all as specified and directed.

Supply & fixing fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed in repairs 15 mm bore of pipe

Supply & fixing for 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe, fixed as in repairs complete all as specified and directed.

Supply & fixing vitreous china water closet (Squatting pan) “Orissa” pattern of size 580 x 440 mm white with integral foot rest and ‘P’ trap (excluding flushing cistern) but including PVC flush pipe and provision of lime concrete bedding as fixed in repairs complete all as specified and directed.

Supply & fixing vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing blts, flushing cistern and flush pipe) fixed as in repairs complete all as specified and directed.

Supply & fixing in repair for seat cover for pedestal pan with plastic water closet seat , black or white, closed pattern with flat bottom and cover amnd mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply & fixing in repairs for 10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle inlcuidng brackets complete all as specified and directed.

Supply & fixing brass CP towel rail, 20mm dia, D type , 60 cm long between flanges fixed in repairs complete all as specified.

Supply & fixing toilet paper holder of viterous china box type white coloured fixed to walls withchromium plated brass screws CP brass fixed to walls etc, fixed in repairs complete all as specified and directed.

Supply & fixing fancy type chromium plated stop valves 15 mm bore cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union as fixed in repairs complete all as specified and directed.

Supply & fixing health faucet with jet spray, 1.5 metre long, cast copper alloy, nickel chromium plated finish, 15 mm bore, 100 mm long with 1 m long PVC tube with wall hook chromium plated fitted to stopcock complete all as specified and as directed.

Supply & fixing in gun metal globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe & fixed in repairs for 20mm bore complete all as specified and directed.

Supply & fixing in gun metal globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe & fixed in repairs for 25 mm bore complete all as specified and directed.

Material & labour for angle stop valve of PTMT any colour high presurre screwed for iron pipe and fixed in repairs for 15mm bore complete all as specified and directed.

Supply & fixing in repairs brass CP shower rose 125mm size complete all as specified and directed.

Supply & fixing in repairs sinks with drainage bard made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwar wall or including fxing cantilever brackets and connecting uinon to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed

Supply & fixing in repairs for providing 15 mm dia PVC connection of length 450mm long complete all as specified and directed.

Taking down chowkats or frames exc 1.5sqm but n.exc 4 sqm each but with shutter (without taking off shutter from the frame) and removing teken down materials such as serviceable / unservicesble chowkats or frames,etc. out side MD land and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge.

-ditto- as per Item No. 86 above but n.exc 1.5 sqm complete all as specified and as directed

Taking down shutters of any description exc 1 Sqm but nexc 2 sqm complete and removing teken down materials such as serviceable / unservicesble chowkats or frames,etc. out side MD land and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge.

-ditto- as per Item No. 88.00 above but exc 2 sqm complete all as specified and as directed

Taking down aluminium windows shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium cleats of existing make and also refixng the locks & roller in existing postiion with and includig new screws including refixing the window shutters in same opening complete all as specified and directed. Note : If broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock is replaced same will be paid separately under relevant items.

Taking down aluminium doors shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing make and also refixng the handles & mortice looks in existing postiion with and includig new screws including refixing the door shutters in same opening complete all as specified and directed. Note : If broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock is replaced same will be paid separately under relevant items.

Supply & fixing aluminium window with frame (minimum waight of tube section 2.1kg/m,two track1.41kg/m, three track 1.671 kg/m and shutter 0.5 kg/m), upto any floor height including MS scafolding made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame & necessary jointing cleats, glazing clips, powder coated aluminium snap beading, screws etc; complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts, hooks & eyes, peg stays and handles including connected items, with and including, making good to the disturbed portion with its original specifications,and seal the window with silicon sealant complete all as specified and directed.

Supply & fixing aluminium door with fame (minimum waight 2.1kg/m) and shutter(minimum waight of partition section 1.6kg/m) , upto any floor height including MS scafolding made out of powder coated extruded aluminium sections fixed with or without ventilator on top with and including powder coated aluminium butt hinges, tower bolt, glazing clips & locking arrangement, snap beading & handles, rubber beading & connected items with & including making good to the disturbed portion with its original specifications complete all as specified and directed. Note: for Srl item No. 7&8 :- Minimum thickness of powder coating shall be 15 micron for windows and 25 microns for doors.

Supply & fixing in repairs concealed star lock powder coated for aluminium window fixed as per manufacturers instructions all as specified and directed.

Hacking out old broken glass ( any thickness, size, quality or description ) from aluminium, wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads upto any floor height including MS scafolding complete all as specified and directed.

Material & labour 3 mm thick plain glass sheets ordinary quality in squares n.exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc all as specified and directed.

Material & labour 4 mm thick plain glass sheets ordinary quality in squares exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc all as specified and directed.

Supply & fixing in repairs upto any floor height including MS scafolding for aluminium anodised Deco grill 7.5 mm size DG-102, fixed to E/H frames, 1.5mm th, bar size 6.2mm and 7.5mm thick in required sizes as directed.

Supply & fixing extruded aluminium alloy handles fabricated type anodized 150 mm size complete all as specified and directed.

Supply & fixing in repairs extruded aluminium alloy handles fabricated type anodized 150 mm size complete all as specified and directed.

Material & labour for double action Hydraulically regulated floor spring made up of minimum 1.25mm thick, aluminium alloy sheet foundation box, main body with stainless steel cover, govering pivot made brass, othr parts made of mild steel heavy duty and fixed complete all as specified and as directed.

Supply & fixing aluminium (extruded section) body door closer hydraulically regulated, designation No.2, universal type, suitable for door shutter of 701 to 850 mm in width & of weight between 36 to 60 kg & fixed in repairs complete all as specified and directed.

Supply & fixing 35mm thick second class hard wood, plain framed, paneled shutter of 9mm BWP comercial ply or 12mm veneered particle board with comercial veneering on both faces the size of rail land stile as per IS 1003 (Part-I) killn seasoned and chemically pressure treated all as specified and directed.

Supply & fixing 2nd class hard wood plain solid, straight, chowkats and frames wrought framed rebated on the solid , rounded or chamfered put together with glue pinned at joints all as specified and directed.

Supply & fixing mild steel flat iron 25 x 3 mm such as in hold fast etc or similar small articles conforming to Fe- 410-0 or 310-0 all as specified and directed.

Supply & fixing 100 mm Butt hinges, mild steel, with mild steel hinge pin, bright polished and fixed, type B-11 all as specified and directed.

Supply & fixing 75 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 all as specified and directed.

Supply & fixing 100 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 all as specified and directed.

Supply and fix 100mm size brass handle cast type polished bright upto any floor height all as specified and directed.

Supply and fix 150mm size brass handle cast type polished bright all as specified and directed.

Supply & fixing for 125mm size double action spring hinges, mild steel wire spring, stove enamelled black as fixed in repairs complete upto any floor height all as specified and directed.

Supply & fixing 200mm long aluminium anodized barrel tower bolts of extruded sections complete upto any floor height all as specified and directed.

Supply & fixing 200mm long aluminium anodized barrel tower bolts of extruded sections as fixed in repairs complete all as specified and directed.

Supply & fixing 150 mm long aluminium anodized barrel tower bolts of extruded sections as fixed all as specified and directed.

Supply & fixing 150 mm long aluminium anodized barrel tower bolts of extruded sections as fixed in repairs all as specified and directed.

Supply & fixing 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

Supply & fixing 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed in repairs all as specified and directed.

Supply & fixing 250 mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed in repairs complete all as specified and directed.

Supply & fixing 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed upto any floor height all as specified and directed.

Supply & fixing in repair 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed all as specified and directed.

Supply & fixing 200mm long brass barrel tower bolts of extruded sections complete all as specified and directed all as specified and directed.

Supply & fixing 200mm long brass barrel tower bolts of extruded sections as fixed in repairs complete all as specified and directed.

Supply & fixing 150 mm long brass barrel tower bolts of extruded sections as fixed complete all as specified and directed.

Supply & fixing 150 mm long brass barrel tower bolts of extruded sections as fixed in repairs complete all as specified and directed.

Material & labour for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete upto any floor height all as specified and directed.

Supply & fixing for 140mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and directed.

Supply & fixing in repair for 140mm long floor door stopper of brass body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and directed.

Supply & fixing in repairs prelaminated 18/19mm thick particle board exterior grade prelaminated both sides with decorative choice lamination fixed with screws to timber/ metal frame work in repairs complete all as specified and directed.

Supply & fixing Aluminium locking bolts, anodized, with bolt not less than 10mm dia, 250mm size as fixed in repairs complete all as specified and directed.

Supply & fixing solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with ms square tube and edges painted to match with printed sheet complete upto any floor height all as specified and directed.

Supply & fixing factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ,C" channel having a PVC sheet strip of 20mm width stuck in side with salvent cemet for stiles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement supply and fixing in the frame at site all as specified and directed.

Supply & fixing Aluminium locking bolts, anodized, with bolt not less than 10mm dia, 250mm size complete all as specified and directed.

Supply & fixing Ist class hard wood glazed and skelton shutter 30 mm thick window shutters divided into squares with plain chamfered or rounded mitred and rebated sash bars with edges of shas bars and frame moulded, fitted with out and mitred beeds for screwing glass/guage etc size of members of shutters as specified in SSR Part-I Section 8.20 (b) all as specified and directed.

Material & labour IInd class hardwood plain, fillets, wrought, square, rectangular or triangular in section exc 13 & n.exc 25 sqcm secured with nails or brads of size as fixed in repairs complete all as specified and directed.

Supply & fixing aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples complete all as specified and directed.

Supply & fixing aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples as fixed in repairs complete all as specified and directed.

Supply & fixing Vitreous china water closet, couple closet, of size 795X360X640mm complete with and including all accessories, fixed in repairs upto any floor height all as specified and directed. (make -Jaquar Cat No ARS-WHT-0313 or equivalent as approved).

Supply & fixing Vitreous china wash basin, of size 175X560X450mm complete with and including all accessories, fixed in repairs upto any floor height all as specified and directed. (Make -Jaquar Cat No CNS-WHT-WB03 or technocommercial equivalent make given in Appx B).

Supply & fixing vitreous china urinals,half stall type, flat back, white, with grating and union for discharge pipe, complete upto any floor height all as specified and directed. (Make -Jaquar Cat or technocommercial equivalent make given in Appx B)

Supply & fixing towel rail 600mm long upto any floor height fixed in repair all as specified and directed. (make -Jaquar Cat No AQN-7711 or technocommercial equivalent make given in Appx B)

Supply & fixing Toilet roll holder fixed in repairs upto any floor height all as specified and directed. (Make -Jaquar Cat No AKB-35753 or technocommercial equivalent make given in Appx B)

Supply & fixing towel ring round fixed in repairs upto any floor height all as specified and directed (make -Jaquar Cat No AQN-7721 or technocommercial equivalent make given in Appx B)

Supply & fixing soap dish fixed in repairs upto any floor height all as specified and directed (make -Jaquar Cat No AQN-7731 or technocommercial equivalent make given in Appx B)

Supply & fixing Hand shower (health Faucet) with 1M long flexible tube with wall hook Chrome Plated (Make -Jaquar Cat No. ALD-CHR-593 & SHA-571 or technocommercial equivalent make given in Appx B)

Supply & fixing two way bib cock with wall flange fixed in repairs upto any floor height all as specified and directed (make -Jaquar Cat No ORM-10041 or technocommercial equivalent make given in Appx B)

Supply & fixing angular stop cock fixed in repairs upto any floor height all as specified and directed (Make -Jaquar Cat No ORM-10053 or technocommercial equivalent make given in Appx B)

Supply & fixing Braided hoses 450mm long fixed in repairs upto any floor height all as specified and directed (Make -Jaquar Cat No ALD-803B or technocommercial equivalent make given in Appx B)

Supply & fixing pillar cock Chrome Plated fixed in repairs upto any floor height all as specified and directed (Make -Jaquar Cat No ORM-10001 or technocommercial equivalent make given in Appx B)

Supply & fixing bib cock fixed in repairs upto any floor height all as specified and directed (Make -Jaquar Cat No ORM-10037 or technocommercial equivalent make given in Appx B)

Supply & fixing glass shelf fixed in repairs upto any floor height all as specified and directed (Make- Jaquar Cat No. CAN-1171N or technocommercial equivalent make given in Appx B)

Supply and fix in repair 270 ltr white rectangular PVC water storage tanks (Loft tank) of capacity following sizes with complete fitting including fixing 03 Nos tank nipples of GI/CPVC with washer for out let and inlet all as per manufacturers instructions including disconnecting service connections/over flow pipes and removing old tank complete upto any floor height complete all as specified and directed.

Supply and fix in repair 270 ltr PVC profile sheet suitable for PVC Loft tank of capacity following sizes including fixing aluminium/ PVC channel around the profile incl removing of tank and refixing the same complete upto any floor height complete all as specified and directed.

Supplying and fixing in repairs 15 mm bore brass float valve, high pressure with polythene float & fly nut complete, screwed for GI/CPVC pipe of following sizes including necessary GI/CPVC fittings upto any floor height complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortat bedding but not backing), removing dismanteled materials such as serviceable/unservicesble tiles,etc. out side MD land and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge. .

Material & Labour for light shade coloured vitrified tiles of size 600mmX600mm and 9-10 mm thick (square/rectangular) polished in floors etc. at horizental surface set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed by the Engineer-in-charge.

Material & labour for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm upto any floor height over & including 15mm thick Screed bed or bedding layer in CM 1:3 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match at horizental surface complete all as specified and as directed by the Engineer-in-Charge

Material & Labour for light shade coloured vitrified tiles of size 600mmX600mm and 8-9 mm thick (square/rectangular) polished in floors etc. at vertical surfaces surface set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed by the Engineer-in-charge.

Material & labour for Glazed ceramic tiles in vertical surfaces upto any vertical height of size 450x350x7mm thick including over 10mm thick Screed bed or bedding layer in CM 1:4 for laying tile finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling complete all as specified and as directed by the Engineer-in-Charge

Demolition of stone slabs and tiles of any description or thickness in floors, approns etc, laid, bedded and pointed in any mortar and removing dimolished materials such as serviceable/unservicesble stone slab and tiles,etc. to store or out side MD accomodation land and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge. .

Material & labour 18 to 20mm Hard wear stone (of any type) granite stone slab 20mm thick machine cut, bedded and jointed horizental/vertical such as in steps, jambs, pillars, win dow-cills, cooking plat forms and lik with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Material & labour for machine pressed pre-cast concrete interlocking coloured paver block and shape and size conforming to as per specification of any thickness with grey cement and pigment laid dry over stone dust or sand base and compacted using vibrator complete all as specified and directed.

Material & labour for designer Chequered cement concrete tiles 30cm x 30cm x 20mm thick set jointed and pointed in neat cement slurry in floors With mixture of white & grey cement in equal proportions & pigments with red and yellow colour over including 20mm thick screed bed in CM 1:6 complete all as specified and directed

Material & labour for 18-20mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:4 complete all as specified.

Demolition of cement concrete in ground floor and paving of any thickness thick below or above ground level un re-inforced complete all as specified and directed. .

Material & labour for PCC of type D2, 1:2:4 using (20mm graded stone aggregate) 100mm thick as in sub base /hard standing etc. complete all as specified and directed.

Demolition of brick work/stone masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles including coping complete all as specified and directed.

Material & labour brick work with sub class 'B' bricks old size, straight or curved on plan exc 6m mean radius in cement mortar 1:4 complete all as specified.

Material & labour for rendering 15mm thick CM 1:6 on fair face of brick work or concrete surfaces of walls and finised surfaces even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.

Material & labour rendering 5 mm thick cement plastering on brick or concrete surfaces in CM (1:4) finished even and smooth without using extra cement all as specified and directed, as in ceiling complete all as specified and as directed by the Engineer-in-Charge..

Material & labour for rendering, 15 mm thick cement plaster 1:4 on brick work/concrete surface finished even and smooth with out using extra cement complete all as specified and as directed by the Engineer-in-Charge.

Material & labour for Preparation of new plastered/concrete surfaces of walls applying two coats of exterior acrylic emulsion (weather proof treatment) over one coat of primer, complete all as specified and as directed ( The tint and shade be as approved by the GE) The treatment shall be carried out by the authorised applicator of the firm and at any height including necessary scaffolding etc complete all as specified and as directed by the Engineer-in-Charge.

Material & labour preparation of new plastered or unplastered surfaces of ceiling including scrapping and applying two coats of oil bound distemper over layer of smooth Putty finish as required punning 3mm thick over a coat of primer strictly as per manufactuure instruction with smooth roller finish complete all as specified and directed.

Material & labour preparation of new plastered or unplastered surfaces of walls including scrapping and applying two coats of oil bound distemper over layer of smooth Putty finish as required punning 3mm thick over a coat of primer strictly as per manufactuure instruction with smooth roller finish complete all as specified and directed.

Taking down cement plaster on brick wall including raking out joints, hacking for key, scrubbing down with water, etc and removing taken down materials such as cement plaster,etc. out side MD accomodation land and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge.

Material & labour prepration of old plastered / decorated surfaces of walls and applying two coat of oil bound distemper on plastered/decorated wall surfaces complete all as specified and directed.

Ditto_ all as per Sl item No 175.00 herein before but on ceiling etc complete all as specified

Material & labour prepration of old plastered / decorated surfaces of walls & ceiling and applying two coat of plastic emulsion paint on old plastered surfaces complete all as specified and directed.

Material & labour for preparation of old painted surfaces of wood or wood based surfaces over 10 cms width or girth and applying one finishing coat of synthetic enamel paint on wooden surfaces complete all as specified and directed.

Cleaning and removing all scale and dirt etc: from the tanks and from mouth of circulating pipes etc complete and finally washing the tanks with clean water and bringing the tank to a position for storing clean water including writing the date of cleaning on the outer surface of the tank by paint, letters of 3cm height and width including obliterating old writing all as specified and directed for the following sizes/capacity of over head water tanks of any type and disconnecting existing tanks,if required, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting , reconnecting and re-fixing in position.complete all as specified and as directed for the folling type/ sizes/capacities: Note :- For purpose of measurement and payment EACH TIME of the cleaning of shall be considered.

HDPE /PVC water tanks capacity not exc 300 litres

HDPE /PVC water tanks capacity capacity exc 300 litres but not exc 500 litres

HDPE /PVC water tanks capacitycapacity exc 500 litres but not exc 1000 litres

HDPE /PVC water tanks capacity capacity exc 1000 litres but not exc 2000 litres

HDPE /PVC water tanks capacity capacity exc 2000 litres but not exc 5000 litres

HDPE /PVC water tanks capacity capacity exc 5000 litres but not exc 10000 litres

SATGURU ENTERPRISE (BID ID -3195697)

the bhimani group of companies (BID ID -3200731)

SN CONSTRUCTION (BID ID -3195262)

DHARICHHAN ENTERPRISE (BID ID -3196529)

RAMESH ENTERPRISES (BID ID -3196102)

SHREE JAGDISH FURNITURE CO. (BID ID -3193530)

M/s. MAYUR ENTERPRISES (BID ID -3201947)

SHRI SAI ENTERPRISES (BID ID -3196778)