Renovation/modification of computer lab for the Department of Textile and Apparel Designing in the premises of College of Home Science at CCSHAU Hisar. (including PH and EI works)

Amount

Civil work 1 to 29:- Dismantling brick work, tile masonry or tile lining and tile terracing {HSR 8.5(b)} (b) in cement

Dismantling concrete {HSR 8.6(b)} (b) cement concrete plain of 1:4:8 or leaner mix

Removing door and windows (wood and steel) with chowkats by making recesses in walls when the wall is not to be dismantled windows {HSR 8.18(b)}

Dismantling cement conglomerate/ terrazzo floors 25mm to 50mm thick including concrete base.(HSR 8.25)

Scraping {HSR 8.32 (a) } (a) White wash and colour wash

Scraping {HSR 8.32(c)} (c) Cement plaster

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in foundation and plinth {HSR 10.41}

First class brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level (HSR 11.7)

Providing and fixing false ceiling with 12 mm thick Gypsum Board fixed on M.S. steel runners frame including cost of screws angles, cleats, rawel plugs with taping, filling with Gypsum compound and applying priming coat etc. complete in all respects (HSR 13.91)

Providing and fixing mineral fibre false ceilings tiles at all hieghts of size 595 x 595 mm of approved texture, design and pattern, the tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 85%, Thermal Conductivity K = 0.052 (-) 0.057 w/m k, Fire Performance as per (BS 476 pt - 6 & 7) in true horizontal level suspended on interlocking T-Grid of hot dipped all round gavanized iron section of 0.33 mm thick (galvanized @ 120 gsm) comprising of main T runners of 15 x 35 mm of length 3000 mm, cross T of size 600 x 600 mm suspended from celing using galvazied mild steel item (galvanizedd @ 80 gsm) 50 mm long 8 mm outerdiameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85 x 25 x 2 mm, spaced at 1200 mm centre of centre along main 'T'. The suystem should rest on periphery walls/partitions with the heop of GI perimeter wall angle of wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all hieghts, The work shall be carried out as per specifications, drawings and as per directions of the Engineer-in-charge. with or without groves (HSR 13.92)

Base course of floors consisting of 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling (HSR 14.1)

Providing and fixing vitrified tiles of size 600 x 600 mm of approved make in flooring laid in any patterns as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles (HSR 14.89) Notes: i. Tile shall be premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT BELL, JOHNSONS & RAK ii. Tiles shall be fixed by using PVC spacers of required size and the space between tiles shall be filled up with cement based grout of approved make & colour. Nothing extra shall be paid for this.

Providing and fixing vitrified tiles of size 600 x 600 mm of approved make in skirting / dado laid in any pattern as specified over base of 12 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles (HSR 14.90) Note : Tile shall be of premium quality (first quality of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT BELL, JOHNSONS & RAK ii. Tiles shall be fixed by using PVC spacers of required size and the space between tiles shall be filled up with cement based grout of approved make & colour. Nothing extra shall be paid for this

15 mm thick cement plaster 1:6 on the rough side of single or half brick wall (HSR 15.12)

Striking joints in lime or cement on brick and tile walls {HSR 15.69(a)}

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces (HSR 16.25)

Distempering with washable oil bound distemper (of approved manufacture) two coasts excluding priming coat on new work (HSR 16.57)

Providing and applying two coats of white cement based putty over plastered surface and grinding the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc., complete (J.K/ Birla make). (HSR 16.81)

Providing and fixing plastic laminated sheets thickness, not less than 1.5mm(conforming to I.S. Specifications), including cost of approved adhesive complete. {HSR 17.88 (a)} (a) natural finish

Providing and fixing Aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS;733 and IS; 1285 fixed with raw plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom, and sides with required neoprene felt etc. aluminium sections shall be smooth rust free straight mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling C.P. brass/ stainless steel screws, all complete. (HSR 17.95) Fixed portion (Anodized Aluminium transparent or dyed to required shade according to IS;1868, minimum anodic coating of grade AC 15)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS; 733 and IS;1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom, and sides with required neoprene felt etc. Aluminium sections shall be smooth, rust free straight mitered and jointed mechanically wherever required including clear angle, Aluminium snap beading for glazing/ paneling C.P. brass/ stainless steel screws, etc. complete. (HSR 17.96) Shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including of cost of PVC/ neoprene gasket required including Aluminium fitting.

Providing and fixing 12 mm thick pre laminated particle board flat pressed three layer or graded wood particle board conforming to IS;12823 grade I type II in paneling fixed in aluminium doors. Windows shutters and partition frames with CP brass/ stainless steel screws etc. complete {HSR 17.97 (b)} (b) Pre-laminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminium door, windows, ventilator shutter and partitions etc. with PVC/ neoprene gasket etc. complete (cost of aluminium snap beading shall be paid in basic items). {HSR 17.98(b)} (b) With float glass panes of 5.0 mm thickness.

Providing fixing aluminium round shape handle of outer dia 100 mm with screws etc. complete. {HSR 17.102(i)} (i) Anodized (AC-15) Aluminium.

Providing and fixing readymade white writing board of PRESKO make with delux frame or any other similar brand, fixed in position, including wooden gutties, nails and screws, etc., complete in all respects as per drawing and design (NS)

Providing and fixing wall paneling (on wall) consisting of following:- Frame work:- Consisting of factory manufactured G.I. channel of size 43 mm x 15 mm x 0.8 mm fixed horizontally @ 2’-0” C/C with rawl plugs/ screws on wall. (a) 12 mm thick BWR grade-II plywood (ISI mark) of approved make fixed on G.I. channel frame. (b) Top portion:- Consisting of 0’-6” wide strips of 1 mm thick plastic laminated sheet (ISI mark) of approved make, shade and colour with 1/8” groove fixed on plywood. (c) Beading:- Beading of size 0’-2¼” x 0’-1¾” of commercial hard wood such as hollock, champs, chikrasy and chaplash at top. Including cost of sprit polishing, rawl plugs, nails, screws etc., complete in all respects as per architectural drawing and design. (NS)

Providing and fixing computer table 2’-0” wide and 2’-6” high consisting of following:- (A) Commercial Plywood:- i. 6 mm thick commercial plywood (ISI mark) of approved make on back. ii. 6 mm thick commercial plywood (ISI mark) of approved make for 5 drawers (each of size 2’-0” x 1’-6” x 0’-6”). (B) Commercial type block board:- 19 mm thick commercial type block board (ISI mark) of approved make for top, sides, cabinet shutters, draws, UPS etc. of required sizes. (C) Plastic laminated sheet:- 1 mm thick plastic laminated sheet (ISI mark) of approved make, shade and colour on all visible portion of commercial type block board and plywood surface except inner side of cabinet shutters and drawers. (D) Sliding shelf portion:- Consisting of 19 mm thick commercial type block board (ISI mark) of approved make for key board/sliding shelf finished both sides with 1 mm thick plastic laminated sheet (ISI mark) of approved make, shade and colour. (E) Wooden moulding:- Wooden moulding of shistern wood of size ¾” x 1/4” on all edges. Including cost of channel with roller for sliding arrangement of shelf portion and drawers, knobs, primer, painting, polishing, piano hinges for openable cabinet shutters, adhesive, looking arrangement for drawer, cutting, wooden/iron screws, nails, rawl plugs/wooden gutties etc. complete in all respects as per architectural drawing and design. (NS)

Providing and fixing glass partition having 12” height at one end and 0’-9” height at other end in between each computer for separation consisting of 6 mm thick frosted glass fixed in readymade aluminium tube of size 32 mm x 32 mm x 3 mm further fixed on top of computer table including nails, screws etc. (NS)

Public Health work 30 to 33:- Providing and installing split type air conditioners, five star rating inverter type with copper coils 2.0 ton capacity ± 10%) fitted with super tropical - DC PAM inverter- return cooled - rotary compressor operating on refrigerant R-410-A suitable for wall mounting confirming to IS : 1391 (part-2)/92 (except power consumption norms) with upto date amendments, suitable for operating on 230 volts, 50 Hz single phase A.C. supply having following specifications:- (i) Cooling coil row -3 Nos. (ii) Air flow (CMH) -1450 cum/ hr. (iii) Sound level (H/M/L)- 41/38/34/25(silent mode) (iv) Louvers swing- 3D + 3D Auto etc. complete in all respect MAKE :- O General/Toshiba/Mitsubishi (Heavy Industries) (five star rating) Model as approved by the Engineer-in-Charge. (NS)

Providing and installation of automatic voltage stabilizer of 5.00 KVA capacity (heavy duty) copper wound 100 up voltatge ofV-Guard make ISI marked complete in all respect. (N.S.)

Providing and fixing extra copper tubing/regrigerent pipe for above split air conditioners (if required) consisting of inlet, outlet pipes, insulation and electric wiring etc. as per requirement, complete in all respect beyond 4.0 metres length. (NS) NOTES :- INSTALLATION OF AIR CONDITIONERS INCLUDES:- 1. Mounting/ fitting indoor and outdoor units at their respective locations 2. Providing & laying refrigerant pipe line of four metres length and beyond (if required) and connecting both the units after drilling holes in the wall, if required. Thickness of the copper tubing shall not less than 0.80 mm. 3. Insulating the suction pipe with expanded polythene pipe tubing. 4. Providing & laying drain pipe to throughout the condensate water being formed in the indoor unit 5. Leak testing entire system 6. Charging refrigerant gas in the unit 7. Electric wiring ; suitable electric wiring and switch should be provided with in 4 metres of the location of the units as per requirement 8. PVC channels for concealing the pipes etc. 9. Refrigerant piping thickness- 18 guage (1 mm) (i) Liquid line :- 6.35mm (1/4") (ii) Gas line:- 15.88mm(5/8") 10. Providing and fixing 2.5 sqmm x 4 core coper wire sheathed for connections and communication between indore unit to outdoor unit. (NS)

Providing and fixing in position powder coated MS stands for outdoor units of air conditioners including suitable nuts & bolts etc. of best quality complete in all respect (NS)

Electrical work 34 to 99:- Supplu and erection of blanking sheet in existing distribution board (HSR 31.16)

MINIATURE CIRCUIT BREAKER AND ISOLATOR: {HSR 31.17(ii)} Supply and erection of miniature circuit breaker/isolator 240/415 V in the existing distribution board including making necessary connections (a) Miniature Circuit Breakers of 9 K.A. breaking capacity (ii)6-32 amp. SP MCB

(ii) 32 amp. TPN MCB {HSR 31.17(ii)}

(iii) 63 amp. TPN MCB {HSR 31.17(iii)}

PIPE LAYING: Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required :-{HSR 31.21 (xvi)} (xvi) Heavy gauge welded conduit pipe 25 mm dia 1.60 mm thickness on surface

EARTHING {HSR 31.22(xvi)} (xvi) Pdg. & fixing 4mm dia GI wire on surface or in recess for loup earthing as required.

Miscellaneous {HSR 31.35(i)(a)} (i) Supply of M.S. Pipe (B-Class) for suspension rod of ceiling fan including threading if required. (a) 15mm dia

(ix)Supply and erection of aluminium lugs heavy duty including crimping etc. upto the entire satisfaction of Engineer-in-charge of the work. {HSR 31.35 (ix) (e)} (e) 25 sqmm

(i) 95 sqmm {HSR 31.35 (ix) (i)}

S/E of PVC unsheathed copper conductor cable single core 1100 volt grade in pipe of suitable size excluding cost and erection of pipe {HSR 31.40 (i)} (i) Size 1.5 sqmm(3/0.81mm)

(ii) Size 2.5 sqmm(3/1.05mm) {HSR 31.40 (ii)}

(v) Cable size 10 sqmm(7/1.35mm) {HSR 31.40 (v)}

S/E of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs etc. Recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the engineer-in-charge of the work {HSR 31.41 (vi)} (vi) 8-way, TP&N (Horizontal) (8+24)

S/E of PVC conduit pipe ISI marked (Medium) recessed in wall/ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work (HSR 31.44) (i) 20mm dia

(ii) 25mm dia

S/E of copper lugs including crimping etc. upto the entire satisfaction of Engineer-in-Charge of work (HSR 31.45) (c) 10 sqmm

Pdg. and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. (HSR 31.56) 10 amp. 1 way switch

20 amp.switch (HSR 31.56)

10 amp. Socket (HSR 31.56)

16 amp. Socket (HSR 31.56)

Bell Push (HSR 31.56)

Fan regulator (HSR 31.56)

Call bell Ding Dong (Monitica) (HSR 31.56)

Blinking plate (HSR 31.56)

Pdg. and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. (HSR 31.57) 3 Modules

6 Modules (HSR 31.57)

12 Modules (HSR 31.57)

Supply, installation testing and commissioning of wall/free standing floor mounting dust & vermin proof compartmentalized cubical panel made out of 2mm thick CRCA sheet, required hardware 3mm thick Bakelite sheet provided all along the bus bar and cable alley separating switches compartment and supporting suitable channel duly painted by 2 coat of Zinc/Red oxide primer followed by 2 coats of powder coating in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3mm thickness separate detachable gland plate MS base channel hinged door with inter locking arrangement for equipment/switch wear. Transparent acrylic sheet shall be provided in front of bus bar compartment to prevent direct access to bus bar Bakelite sheet 3mm thick for separately cable alley to BBC from switch chamber extended solid copper bars upto cable alleys shall provided for outgoing connection which shall be paid as extra items. Side walls and cable alley compartments shall be having bolted type doors with detachable extension type structure. The panel will be complete with control wiring (copper) and fuse protection (Only outer area on all sides shall be measured) (HSR 31.63)

Supplying and fixing of copper bus bar duly tinned by means of SMC/DMC type insulator high tensile nuts and bolts spring washers fixing to same in existing panel including bending, cutting in required shape and size and insulation with colour coding heat shrinkable PVC insulation complete in all respect. (HSR 31.64)

Suppluy and erection of module case circuit breaker single pole/4 pole on wall on existing prdestal including boundaing to earth and making necessary connection required to complete the job in all respect up to the entire satisfaction oof the Engineer-in-charge of work (HSR 31.69) (iv) 4 pole MCCB 6 amp to 63 amp

S/E/T/C of cat-6 cable in existing PVc conduit /PVc channel complete in all respect with all labour and material required to complete the job in all respect. (HSR 31.80)

S/E of AC ceiling fan capacitor type complete with shackle, 300mm down rod . {NS} i) 1400mm sweep. Make: Usha, Orient, Crompton.

S/E of recessed type 42 Watt full window glare free opal diffuse LED Panel of size 595x595 mm suitable for Armstrong/POP/GB ceiling with M.S. Powder coated white housing. Total system lumen of 42 watt LED should be 4600 or above in cool day light (5600K to 6500K), Power factor >0.95, CRI (Ra) >80, LED Lamp efficiency ≥ 140 lm/w, Average life > 50000 hours, complete with all accessories as required with connections (Industrial) Make: Havells (NS)

Supply of propeller type AC ventilating fan (exhaust fan) with necessary earthing arrangements of fan with shutter complete in all respects Size 300mm(12”) sweep Make: Orient, Usha, Khaitan, Havells. (NS)

S/I/T/C of push ON/OFF type 25 A modular type motor starter switch (white color) for AC's including the cost of petty material required to compete the job upto entire satisfaction of Engineer-in-charge. (NS) Make;- Schneider/Crabtree/Athena

S/E of surface/wall mounted ≤20W integrated LED 4 feet fitting with Epoxy Powder coated white/Grey extruded aluminium channel housing for efficient heat dissipation. Total system lumen of 20 watt LED should be ≥ 2000 or above in cool day light (5700K to 6500K), Power factor >0.95, CRI >80, Average life >50000 hours. Complete with mounting Brackets & accessories as required with connections(Industrial) Make: Philips, Havells, Wipro, Bajaj. (NS)

Supply & Erection of 300 mm Sweep wall mounting fan with pull cord control for speed and oscillation3 years comprehensive warranty period including the cost of all petty material required to complet the job upto entire satisfaction of Engineer-in-Charge (NS) Make:- Orient/Havelles/Bajaj

S/E LED Panel 1x4 36 watt total system lumen should be 4000 or above in cool day light (5700K to 6500K), Power factor >0.95, CRI >80, Average life >50000 hours. Complete with mounting Brackets & accessories as required with connections(Industrial) Make: Philips, Havells, Wipro, Bajaj. (NS)

Provision of CCTV:- Supply Installation testing & commissioning of 4MP IP Network Dome Camera with 3 Year free comprehensive warranty period including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge having following technical specifications : Image Sensor : 1/3” 4 Megapixel Progressive scan CMOS sensor or better, Effective Pixels : 2688(H)x1520(V)) or better, Electronic Shutter : Auto/Manual, 1/3(4)~1/100000s, Scanning System : Progressive, Mini. Illumination : 0.08Lux/F2.0(Color); 0Lux (IR on), S/N Ratio : More than 50dB, Min. IR LEDs Length ≥50m, IR Leds : 1, Day/Night : Auto(ICR) / Color / B/W, Back Light Compensation : BLC / HLC / WDR(120DB), White Balance : Auto/Natural/Street Lamp/Outdoor/Manual, Motion Detection : Off/On (4Zone, rectangle), Focal Length : 3.6mm,Region of Interest : off/on(4Zone), Angle of View : H: 104° ,V: 57°, Video Compression : H.265+/ H.265, Resolution : 4MP (2688x1520)/3MP(2304x1296)/ 2MP(1920× 1080)/720P(1280× 720), Frame Rate (3 Stream) : Main stream (4MP (1 ~ 25/30fps)) & Sub stream : D1(1 ~ 25/30fps)& Third Stream : 720P (1 ~ 25/10fps), Digital Zoom : 16x, Bit Rate : H.265: 14 ~ 9984Kbps, Network Ethernet : RJ-45 (10/100Base-T), Flip : 0°/90°/180°/270°, Protocol : HTTP; HTTPs; TCP; ARP; RTSP; RTP; UDP; SMTP; FTP; DHCP; DNS; DDNS; PPPOE; IPv4/v6; QoS; UPnP;NTP; Bonjour; 802.1x; Multicast; ICMP; IGMP; SNMP, Compatibility : ONVIF, SD Card : Min 128GB SD card support, Power Supply : DC12V, PoE (802.3af), Working Environment : -30°C~+60°C / Less than 95%RH (no condensation), Ingress Protection : IP67, Audio Interface : Built-in-Mic, Intelligence (IVS) : Tripwire, Intrusion, Object Abandoned/Missing, Advanced Intelligent Functions : Face Detection, Certification : CE, FCC,UL (NS) MAKE : DAHUA/HYUNDAI/HONEYWELL/HIKVISION

Supply Installation testing & commissioning of Video Management Recorder with 3 Year free comprehensive warranty period including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge having following technical specifications : Main Processor : Intel Quad-core Processor or better, Operating System :Embedded LINUX,IP Camera Input : 32 Channel or More, Two-way Talk : 1 Channel Input, 1 Channel Output/RCA, Interface : ≥2 HDMI (up to 3840 x 2160 , Different Source), ≥1 VGA, Compression : H.265/H.264, Resolution : 12MP, 8MP, 6MP, 5MP, 4MP, 3MP, 1080P, 1.3MP, 720P etc., Bandwidth : >340Mbps,Record Mode : Manual, Schedule (Regular, MD (Motion Detection), Alarm, Analytics), Holiday, Stop, Video Detection : Motion Detection/ Video Loss and Tampering/ Multiple VCA Event, Alarm input : ≥16 Channel, Relay Output : ≥8 Channel, Search Mode : Time /Date, Alarm, MD / Smart Search, Backup Mode : USB Device/Network/eSATA Device, Network Interface : 4 RJ-45 Ports (10/100/1000Mbps), Ethernet Port : 4 Ethernet Ports Joint Working or 4 Independent 1000Mbps Ethernet Ports, Network Function : HTTP, HTTPs, TCP/IP, IPv4/IPv6, UPnP, RTSP, UDP, SMTP, NTP, DHCP, DNS, IP Filter, PPPoE,DDNS, FTP, Alarm Server, IP Search etc., Optical Fiber Interface : ≥2 Giga Optical Fiber Interface, User Access : ≥128 users, Smart Phone : iPhone, iPad, Android, Interoperability : ONVIF 2.4, CGI Conformant, Internal HDD : 8 SATA HDDI Ports, Up to 8 TB capacity for each HDD, HDD Mode : Single, Raid 0/1/5/6/10, Support Global HDD Hot-spare, eSATA : 1 eSATA Port, SAS : 1 Mini SAS Port, for Storage Expansion,Front Cover : Support Hot-swap, USB : 4 USB Ports (2 USB 2.0 , 2 USB 3.0 ), RS232 : 1 Port, for PC Communication and Keyboard, RS485 : 1 Port, for PTZ Control, Power Supply,Redudant Power supply : Support, Operating Conditions : -10°C ~ +55°C, Certifications : CE,UL,FCC (NS) MAKE : DAHUA/HYUNDAI/HONEYWELL/HIKVISION

Supply Installation testing & commissioning of outdor 4*4 box with the 3 years free comprehensive warranty period including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge.(NS) MAKE : STRONGER/MOLEX/AMP

Supply Installation testing & commissioning of 6TB surveillance hard disk with the 3 years free comprehensive warranty period including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. (NS) MAKE : WD-PURPLE/SEGATE

Provision of Data Passive:- Supplying, Installation,Testing & Commissioning of 43 " LED Full HD TV Resolution 1920 x 1080 ,Contrast Ratio (Typical) 5000:1,Built-in Speaker (10W + 10W), Magic Clone (to USB), Auto Source Switching & Recovery, Lamp Error Detection, Super Clear Coating, Temperature Sensor, Plug and Play (DDC2B), Pivot Display, Clock Battery, PIP/PBP, Video Wall (10x10), Image Rotation, Button Lock, HDCP Support, Smart Scheduling, Smart F/W update, Built-In MagicInfo Premium-Swith Mounting Brackets as per Technical Specification complete in all respect. (NS) MAKE :- Sony / Samsung / LG

Supply Installation testing & commissioning of 48 Port Non POE Access Switch with the 3 years free comprehensive warranty period and 24x7 direct OEM TAC Support having following technical specifications : Switch architecture should be Fixed Form factor/ stackable based. Switch should have wire-speed, non-blocking and fanless designe Architecture, Switch should have minimum of 48 x 10/100/1000 Mbps RJ45 ports and additional 4 SFP+ (1G/10G ) fiber based ports, Minimum 2 port Populated with 10G MMF, Switch should have minimum of 136 Gbps or more data switching capacity and 95 Mpps or more forwarding throughput, Access Switch should have stacking capability with minimum stacking bandwidth of 40Gbps and should support a minimum of 8 units in a stack Minimum one meter Stacking cables should be included in supplied material, Switch should support min 16 K MAC addresses and min 4000 active VLANs, Switch should have full Layer 2 features like STP, RSTP, MSTP/PVST, LACP/IEEE802.3ad, ACL, QoS and IGMPv1/v2/v3, Switch should have Static Routing for IPv4 & IPv6, Access Switch should be upgradable to support advance Layer 3 features like, RIPv1/v2, OSPF v2, OSPFv3, and HSRP/VRRP in future with an additional software license upgrade, Should support 4K IGMP Groups, Should support 8 queues per port and security protocols like RADIUS, TACACS/TACACS+, AAA & SSH, Switch should be quoted with 3 years direct OEM TAC support and Next Business day hardware shipment, Proposed switch should be IPv6 logo certified, including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. (NS) MAKE : BROCADE/CISCO/HP

Supply Installation testing & commissioning of 24 Port POE Access Switch with the 3 years free comprehensive warranty period and 24x7 direct OEM TAC Support including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge having following technical specifications : Switch should offer Wire-Speed and Non-Blocking Switching with 24 10/100/1000 RJ45 PoE/PoE+ Ethernet ports and additional 4 SFP+ (1G/10G ) fiber based ports, Minimum 2 port Populated with 10G MMF,Access Switches should support non-blocking switching fabric capacity of minimum 88 Gbps and minimum line-rate forwarding capacity of 57 Mpps, Access switch should support minimum 16K MAC addresses and minimum 4K active VLANs, Access Switch should have stacking capability with minimum stacking bandwidth of 40Gbps and should support a minimum of 8 units in a stack. Minimum one meter Stacking cables should be included in supplied material, Access switch should support up to 8 hardware queues per port, Access Switch should support full Layer 2 features like STP, RSTP, LACP, ACL, QoS, IGMP v1/v2, Access Switch should support basic L3 features like IPv4 & IPv6 static routing, Layer 3/4 ACLs, ECMP, virtual interfaces and routed interfaces from day 1, Access Switch should be upgradable to support advance Layer 3 features like, RIPv1/v2, OSPF v2, OSPFv3, and HSRP/VRRP in future with an additional software license upgrade,Access Switch should support minimum 1K IPv4 routes, The Access Switch should support IPv6 management features like IPv6 ping, IPv6 trace route, IPv6 Telnet, IPv6 TACACS, IPv6 and IPv6 RADIUS, All Switches and Transceivers should be of same OEM make,Access switch should support minimum 4K ACL rules ACL per Switch, Access switch should support SNMP v1/v2/v3, SSH, NTP and web management, Access switch should have 1G of RAM and 2G of Flash Memory.(NS) MAKE : BROCADE/CISCO/HP

Supply Installation testing & commissioning of 10GBASE-SR,SFPP MMF LC CONNECTOR with the 3 years free comprehensive warranty period and 24x7 direct OEM TAC Support including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. (NS) MAKE : BROCADE/CISCO/HP

Supply Installation testing & commissioning of DIRECT ATTACHED SFPP ACTIVE COPPER with 10G speed, 1M with the 3 years free comprehensive warranty period and 24x7 direct OEM TAC Support including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. (NS) MAKE : BROCADE/CISCO/HP

Supply Installation testing & commissioning of 1 Port British Style Shuttered Faceplate (3*3) including 3 years free comprehensive warranty period and cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. (NS) MAKE : DLINK/AMP/R&M

Supply Installation testing & commissioning of SL Series Category 6 Modular Jacks, including 3 years free comprehensive warranty period and cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. (NS) MAKE : DLINK/AMP/R&M

Supply Installation testing & commissioning of Category 6 Patch Cord 7feet, including 3 years free comprehensive warranty period and cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. (NS) MAKE : DLINK/AMP/R&M

Supply Installation testing & commissioning of 24Port loaded Straight Jack pannel, including 3 years free comprehensive warranty period and cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. (NS) MAKE : DLINK/AMP/R&M

Supply Installation testing & commissioning of Horizontal PVC Cable Manager - 1U , including 3 years free comprehensive warranty period and cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. (NS) MAKE : DLINK/AMP/R&M

Supply Installation testing & commissioning of 18U Wall Mount rack with front glass door lockable, Fans 90 Cfm 230 Vac, PDU Horizontal 5Amp with 6 Schokets, Cantilever Tray-1U, Horizontal PVC Cable Manager and Hardware front panel Mtg. including 3 years free comprehensive warranty period and cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. (NS) MAKE : DLINK/AMP/R&M

Providing Penta scanning, Documentation, Numbering/ Ferruling, Tagging, Labeling of UTP Cable in soft & hard copy of the whole system including the cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. (NS)

Supply and erection of copper bonded earth rod of 10 ft. length, 17.2mm dia made of high tensile low carbon steel circular rods, molecularly bonded with 99.9% electrolytic grade copper on outer surface (Min. copper bonding thickness-250 microns) with exothermically jointed copper bus bar of 50mm x 6mm x 200mm. The copper bonded rod and the exothermic joint together should be tested by CPRI on 25KA fault current. The earth rod should be UL certified confirming to UL 467 with ROHS tested 50 kg. earth enhancing compound with each rod having passed leaching, sulpher, corrosion, resistivity test as per IEC-62561-7. Complete in all respect with the entire satisfaction of Engineer-in-Charge. (NS) Make :- JMV / ERICO / FURSE / KINGSMIL

Supply and erection of 8mm copper clad steel conductor for better corrosion resistant, long life to be connected from earthing to end equipment. Complete in all respect with the entire satisfaction of Engineer-in-Charge. (NS) Make:- JMV/ ERICO /FURSE /KINGSMIL

Supply, Installation and commissioning of 1 x 10 KVA UPS Each UPS of 10 KVA/8 KW should have following specifications in addition to tender requirements : True online double conversions, IGBT Rectifier & inverter based UPS. Three phases Input/ three phase output with SMF batteries Suitable for 30 Min backup on Full load (20 KVA) at 0.8 output power factor. Input voltage range 360-478V at 100% load, 220-478 V @ 50% load. Input power factor 0.99,Output THD is less than 3% for linear load. Less than 5 % for nonlinear load. Crest factor 3:1, over load 125% for 10 min, 150% for 1 min and should be able to operate continuously at 115% load on bypass mode. Battery voltage Adjustable from 384VDC to 480 VDC on site. Battery Bank sizing as 42 AH x 40 nos. X 1 String. Battery type should be Valve regulated lead-acid (VRLA) of make Exide/Panasonic/QUANTA/Rocket. Audible noise level should not exceed 63 dB (A). Parallel communication port, RS232. USB EPO and SNMP interface, BMS interface are required. EMC-IEC62040-2 safty-IEC62040 II operating temperature 0-40 deg C, relative humidity 95% Non-Condensing. No derating e to 40 Deg temp.. UPS shall have inbuilt Input Isolation Transformer. static by pass and manual by pass built in required. Third party test report through accredited lab like TUV is required for IEC 62040-3 and IP20. UPS should be provided with environment monitoring probe to measure temperature and humidity of UPS room. UPS shall have dust filter sat Air Inlet level to improve UPS reliability. LCD Display indicating all important parameters. SNMP software should be compatible to Microsoft windows XP, Windows Vista, Window 8, Window server 2003 R2, UPS software should be compatible to google chrome, Mozilla fire fox and Microsoft internet explorer. Battery rack, battery interlinks battery breaker, battery to UPS cable as required should be provided with UPS systems. (NS) Make: Elnova, Eaton, Peagasus,GE,Gutor

Sub Head-II FIRE ALARM SYSTEM Supply and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of crecessed conduit as required {HSR 31.44 (b)} (b) 25mm

Supply, installation and Commissionng of addressable fire alarm panel which consists of display board which will have 160 chracter display with touch key pade, motherboard which will have ARM CORTEX M3 32 Bit Processor, Inbuilt RS-485 Networking Circuit for peer to peer networking, Inbuilt USB 2.0 Port for upload and download the Configuration tools. Two inbuilt programmable inputs, two inbuilt NAC's and three programmable replays and loop card circuits power supply board, which will have SMPS fully protected board, which its operates on 120 to 220V AC± 10% with 50/60 Hz, battery backup 24V DC with built-in-charger. The panel have IP-50 rating Optional: for BMS integration thru MODBUS converter, Graphical Software, Software for TCP/IP Module, provision for GSM based Auto dialler, provision for printer thru complete module, Apprvoal UL/EN listed only. (NS) Approved Make:- Notifier/Edward/Ravel/Agni

Supply, Installation and Commissioning of Addressable Smoke detector with base with Binary coded address setting. Dual LED's for 360" visibility. Polarity Free, sleek low-profile housing design. Regular 100 mm base. IP Rating : IP -42. Approval : UL/EN Listed. (NS) Approved Make:- Notifier/Edward/Ravel/Bosch

Supply, Installation and Commissioning of Response Indicator Alarm status is indicated by Red colour LED, Operates on 12 VDC, Dual LED's for 360 deg visibility, Flush/Ceiling wall mount, Operating Voltage: 12 VDC, Operating Current: 10 mA, Alarm Indication: RED LED with required accessories. (NS) Approved Make:- Notifier/Edward/Ravel/Bosch

Supply, Installation and Commissioning of Manual Pull Station Single Action/Dual Action with back box and Break Glass Rod, shall be resettable by Align key to avoid unauthenticated restorations, Addressabel Mini Monitor Module with back box of pull station for monitoring the field NO/NC device. Shall have Binary Coding Setting Dip switch, shall have an LED indication for normal and Activate mode. Approval : UL Listed. (NS) Note: Need to connect with Monitor Module Approved Make:- Notifier/Edward/Ravel/Bosch

Supply, Installation and Commissioning of Conventional Sounder cum strobe with 24 V DC audiable sound 75 db @ 1 mtr range (16 V DC). It is used for Fire, Burglar & Emergency Alarm System, low current consume @c 47-73 mA Candela : flashing every second, 4 candela setting: 15/30/75/110cd output and 2 different tone audiable sound -UL listed. (NS) Approved Make:- Notifier/Edward/Ravel/Bosch

Supply, Installation and Commissioning of Fault isolate Base/Module capable of monitoring shorted loop circuit and automatically restore communications when shorted conditions are corrected. (NS) Approved Make:- Notifier/Edward/Ravel/Bosch

Supply, laying and commissioning of 2 core 1.5 sq mm FRLs twisted pair shielded copper conductor cable as per IS:694 in existing conduit. (NS) (Make- Paramount/Polycab or equipment)

VIJAYM PROJECTS PRIVATE LIMITED