NEW REST SHED IN ZOO PREMISES FOR ZOO VISITOR

Amount

Earth work excavating and depositing on bank with initial lead of 10mt. And initial lift of 2mts in Hard gravelly soil for foundation

Supply and filling M sand for foundation,basement etc.,

Plain cement concrete 1:4:8 using 40mm metal for foundation and others

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification

Reinforced Cement concrete 1:2:4(one cement, two sand and four hard broken stone) using 20 mm gauge hard broken granite stone jelly for all RCC works such as lintels, beams, floor or roof slab, canopy slab, sill slabs, sunshades, staircase faces and other similar it.

Brick work in cement mortar 1:5 (One cement and five sand using second class table molded chamber burnt bricks of size Masonry projection wherever necessary for obtaining required elevation should be done without cost) For foundation and basement

Plastering CM 1:5 12 mm thick for wall surface

Painting two coats with plastic Emulsion paint by (ACE) of approved quality and colour over a priming coat for outer wall

Refilling with excavated earth complying with standard specification for filling in foundation and basement

Finishing top of flooring with a layer of cement concrete 1:3 (one cement and three stone jelly) ELLIS pattern 30mm thick using 10mm and below guage HBGS (No sand to the added) and the surface rubbed smooth with cement.

Flooring with Attangudi Tiles of approved quality and colour size 305x305x6mm thick laid in cement mortar 1:3 20mm thick and painting with white cement including furnishing the joint and painting flush with the surface complete

Supply of GI Pipe for column Medium (B-Class) Thickness Weight

Supplying of using MS rectangualar tube 80x50x3mm

Petty iron work for truss, straps etc., (wrought & fixed) labour only

supplying, fabricating and placing in position of truss using ,MS square tube size of 50x50x3

Providing required bamboo reaper at 15cm intervals and laying double cadjan leaf roofing over with dey grass roofing 15 cm to 20 cm, coconut coir rope, Kasangu (Binding materials for dry grass) including materials, Labour charges, Transporting charges, etc., complete work

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Supplying and laying of Interlocking Paver Block Stone 60mm thick Over a base layer of crushed stone sandfilling incl. Cost of materials laying and Labour charges etc complete complying with the standard specification and as directed by the departmental officers

HANIF MART (BID ID -1537327)