GE(S) BTD 54 OF 2019-20 REPAIR TO SUNKEN FLOOR SANITARY FITTING PLUMBING WORK JOINERY PLASTERING TILING CEILING PANELING WORK IN ZONE E AREA 55 FMSD 4010 FD HOSPITAL 10 CDU CBRN SCHOOL AND STN HQ CELL IN AGE BR II UNDER GE SOUTH BATHINDA

Amount

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified & directed.

M & L for PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) average 25mm thick as in sunkan portion all as specified and directed.

M&L for rendering 15 mm thick on wall surfaces in CM 1:3 mixed with water proofing compound complete all as specified and directed.

Supply only Integral water proofing compound, complete all as specified & directed.

M&L for PCC 1:5:10, type E-2 as in filling of sunken floors etc, complete all as specified & directed.

S & F in repairs vitreous China squatting pan of Orissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified & directed.

S & F in repair vitreous china urinal, half stall type white excluding flushing cistern, flush and waste pipe including providing and titing plugs, bedding urinal against wall in CM 1:3, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement mortar all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white with CI 'P' or 'S' trap incl water closet seat cover of plastic,jet etc.complete incl necessary PVC waste pipe fitting, all as specified & directed.

S & F in repair PVC low level cistern of 10 litres capacity inclusive of brackets and PVC bend long type and connection to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make complete all as specified & directed.

S&F in repair vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and as directed.

S&F in repair pillar taps cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore and fixed complete all as specified & directed.

S & F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified & directed.

S & F in repair 15 mm bore brass stop valve cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed all as specified & directed.

S&F in repair brass chromium plated shower rose 100 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and directed.

S & F in repairs 15 mm dia brass stop valves cast copper alloy (concealed type) complete all as specified and directed.

S&F in repair stainless steel sink without drainage board made of stainless steel of 1mm thick kitchen sink of size 495 x 420mm, bowl size of 410 x 330 x 160mm with coupling ,waste pipe and brackets etc complete all as specified & directed.

S&F in repair stainless steel sink with drainage board made of stainless steel of 1mm thick kitchen sink of size 915 x 460mm, bowl size of 410 x 330 x 160mm with coupling ,waste pipe and brackets etc complete as as specified & directed.

S&F in repair Kitchen plate rack made of stainless steel not less than 1mm thick with fixing acessories, overall size 600mm x 600mm x 250 mm , complete all as specified & directed.

S&F in repair 15 mm dia bore CP brass bib tap fancy type complete all as specified & directed.

S&F in repair CP grating of best quality of size 100mm complete all as specified & directed.

S&F in repair towel Ring of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats etc all as specified & directed.

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges, complete all as specified & directed.

S&F in repair chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed.

S&F in repair shelf of PTMT (450 cm long) fixed to wall with PVC dash fastener and steel screw etc complete all as specified and directed.

M&L in repair for 22-25mm dia fancy type PVC coated on MS Pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed. (Note : The cost of brackets and knobs is deemed to be included in the quoted rate. Nothing extra shall be paid on this account).

S&F in repair Acrylic sheet corner shelf 200 mm size fixed in position with stainless steel screws & PVC rawl plugs complete all as specified & directed.

Dismantling Wall lining& Ceiling boards any thickness including cover fillets, complete all as specified & directed.

S & F 600x600mmx4mm thick 'E' board as in false ceiling including 'Tee" grid frame work made of special section of MS galvanized sheet 0.30mm thick, bottom portion painted with cellular nitro painting, consisting angle cleats of size 25mm wide, 1.6mm thick with flag fixed to RCC ceiling with dash fastener or wraping the suspending wire around the existing wooden/steel purlin/rafter for suspending grid frame work of size 600mmx600mm suspended with 02 Nos, 1.60mm dia GI wire @ 600mm C/C on main Tee and fixed to T-grid with the help of level clip or as per manufacturer direction. The section consisting of main Tee 37mm x24mmx0.60mm thick, cross runner tee 37mmx24mmx0.60mm and. Perimeter angle 24mmx24mmx0.50mm thick shall be fixed to wall with GI screw of 40mm long @ 450mm C/C along the perimeter of wall including or wall including all as per manufacturer's instruction complete all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and directed.

S&F 5mm thick PVC sheet in strips and channel feathered at the edges for fixing on wall paneling inclusive of solvent cement as per specification complete all as specified and directed.

S&F Hollow PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site all as per specification complete all as specified and directed.

M& L in repair Block board Grade 2 quality, 18/19 mm thick interior grade, commercial type, fixed with screws to timber frame work and removal of dismantling materials from site complete all as specified and directed.

M& L Decorative laminate type 1 of surface finish 0.9 mm thick shade and pattern as approved Fixed with approved adhesive as per manufacture's instruction compete all as specified & directed.

M&L Decorative laminate type 1 of surface finish 0.7 mm thick shade and pattern as approved Fixied with approved adhesive as per manufacture's instruction compete all as specified & directed.

S&F in repair Continuous (piano) hinges 20 mm wide flaps, mild steel, bright finish or electro galvanised, complete all as specified & directed.

S & F Aluminium anodised handle, cast type 75mm long fancy type fixed to wooden surfaces with stainless steel screws, complete all as specified & directed.

S & F Ball catches with 8 mm dia steel ball and brass body and striking plate including letting in complete all as specified & directed.

S&FSecond class hard wood (hollock) plain fillets of size not exceeding 3 Sq. cm, square, rectangular or triangular in section, wrought, secured with head less nails or brads, complete all as specified & directed.

Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc, complete all as specified & directed.

M & L for 15 mm thick cement plastering in patches in CM 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

M & L for rendering 10 mm thick in patches on fair faces of brick or concrete surfaces in CM 1:3 as on ceiling, facia roof projection etc finished even and smooth without using extra cement, complete all as specified & directed.

M & L for 15 mm thick cement rendering in patches in CM 1:4 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

M &L for two coats of oil bound distemper on new surfaces of walls including preparation to distempering to match with existing work complete all as specified and directed.

M&L for three coats of white wash on new surfaces of ceiling including preparation of new surfaces of walls to match with existing work complete all as specified and directed.

M&L for two coat of snowcem ( cement based paint) on new surfaces of walls, including preparation of surfaces to match with existing work complete all as specified and directed.

Complete removal of existing treatment on wall and ceiling (any number of layears) by scrapping with steel wire brushes or any other means, including filling depressions of scrapped surfaces with wall putty and removing vegetable/plants roots from walls/Chajjas and preparation of surfaces for further treatment etc complete all as specified and directed.

M & L for one coat of oil bound distemper on old surfaces of walls complete all as specified and directed.

M&L for one coat of white wash on old surfaces of ceiling complete all as specified and directed.

M&L for one coat of snowcem ( cement based paint) on old surfaces of walls complete all as specified and directed.

Preparation of old wood or wooden based surfaces of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint, complete all as specified & directed.

M&L for one coat of synthetic enamel paint on old surfaces of steel including prepration of surfaces, complete all as specified & directed.

Taking down chowkats or frame with shutter of any description (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site complete all as specified and directed.

S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications and as directed.

S & F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings all as specified & directed.

S&F 100 mm long extruded aluminium alloy butt hinges fixed to PVC door with screwscomplete all as specified and directed.

S&F aluminium anodiesed barrel tower bolt of extruded section size 150 mm, complete all as specified & directed.

S&F aluminium handles cast type anodized size 125 mm long, complete all as specified & directed.

Taking down shutter of any description exc 1.00 sqm and n exc 2.00 sqm each and removal from site, complete all as specified & directed.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters of any description (without taking off shutters from the frames) and removal from site complete all as specified and directed.

S& F Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified and directed.

S&F for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified and directed.

S&F for pressed steel frames of size 75 X 60 mm for Cubboard frames with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified and directed.

S&F 30mm thick. flush shutter, solid core construction with particle board core and ply wood face panels commercial type on both side complete all as specified and directed.

S & F 35 mm thick glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats complete all as specified and directed.

S&F 2nd class HW 35mm thick plain framed panelled shutters with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I)kiln seasoned and chemically pressure treated.complete all as specified and directed.

S&F 18/19 mm thick medium density flat pressed three layer type with BWR type adhesive particle board with 5 mm thick teak wood edging on one side bottom and top and other side 10 mm teak wood edging with rebate suitable for cup board shutters complete all as specified and directed.

S&F 100 mm long aluminium anodised hasp and staple safety type including bolts to hinge plate and fixed with screw complete all as specified and directed.

S & F galvanised mild steel wire cloth 0.46 mm nominal dia of wire and average width of aparture 1.18 mm and fixed with tinned tacks or galvanised wire stapple, complete all as specified & directed.

S & F 300 mm mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed, complete all as specified & directed.

S&F mild steel barrel tower bolts 200 mm long, ISI marked stove enamelled block with bright bolt and fixed complete all as specified and directed.

S&F butt hinges 100mm long, ISI marked medium weilght cold rolled mild steel and fixed complete all as specified and as directed.

S&F mild steel pressed handles 150mm size, oval type ISI marked stove enamelled black complete all as specified and directed.

M & L preparation of new wood surfaces and applying two coats of sythetic enamel paint over a coat of wood primer, complete all as specified & directed.

S & F Steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including one shop coat painting, complete all as specified & directed.

S & F Steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded including one shop coat painting, complete all as specified & directed.

S & F steel windows or ventilators fixed type with glazing bars complete all as specified & directed.

S & F window guard bars and similar works with ends of bars welded or riveted confirming to Fe.290. Gde-E-165 complete all as specified & directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint (for steel surfaces) over a coat of red oxide primer to steel surfaces, complete all as specified & directed.

M & L sheet glass ordinary quality 3.00 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden window frames, complete all as specified & directed.

All as per item No 81 but pin head type, figured glass

S&F anodized aluminium frame for door,window and ventilators with one or more rebate including joining cleat compete all as specified & directed.

S&F in repair anodized aluminium door shutters, aluminim section weight 0.55kg/m including necessary joining cleats, glazing clips, rubbers packing,handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc complete all as specified & directed.

S&F in repair anodized aluminium window and ventilators shutters fixed type without sash bar, aluminium. section weight 0.55kg/m including necessary joining cleats, glazing clips, rubbers packing, anodised aluminium snap beading, screws etc complete all as specified & directed.

S&F in repair anodized aluminium window and ventilators shutters side hung type without sash bar, aluminium. section weight 0.55kg/m including necessary joining cleats, glazing clips, rubbers packing, anodised aluminium snap beading, screws,anodised aluminium fittings such as peg stay hinges, magnet catcher,tower bolt, suitable handles,hasp & staple etc complete all as specified & directed.

S&F in repair anodized aluminium door shutters powder coating of any colour ( thickness of powdercoating not less than 50 micron), alumimnium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubbers packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc, complete all as specified.directed.

S&F in repair anodized aluminium window and ventilators shutters powder coating of any colour ( thickness of powder coating not less than 50 micron) fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubbers packing, anodised aluminium snap beading, screws etc in repair complete all as specified & directed.

S&F anodized aluminium window and ventilators shutters powder coating of any color ( thickness of powdercoating not less than 50 micron) side hung type w/o sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubbers packing, anodised aluminium snap beading, screws,anodised aluminium fittings such as peg stay hinges suitable handles etc in repair complete all as specified & directed.

S&F 4.00mm thick glass ordinary quality area not exc. 0.5 Sqm in each pane complete all as specified & directed.

S&F 4.00mm thick glass ordinary quality area exc. 0.5 Sqm in each pane complete all as specified & directed.

S&F 12 mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations complete all as specified & directed.

S&F in repair aluminium Body Door Closer hydraulically regulated, designation No. 2 universal type suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed all as specified & directed.

Hacking out old broken glass from metal frame of any thickness incl punching or drilling out old glazing pins/springs clips and S/F for 3 mm thick ordinary sheet glass and glazing with oil putty in square nexc 0.5 sqm in each pane.complete all as specified and directed.

Cutting holes in brick walls built in cement mortar including making good dismantled portion in CM (1:3) or cement concrete (1:2:4) type B-1 exc half brick but n.exc one brick, complete all as specified & directed.

S&F framed brackets of angles cut to shape, drilled and counter sunk for screw including bending and welding angles as necessary, each backets confirming to Fe - 290, Gde - E - 165 as door frame, steel gate,sink, hand wash basin and cooler stand etc complete all as specified and directed.

Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.

Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.

S&F 100mm dia Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but fixed to walls & fixing with clamps, complete all as specified & directed.

S&F 75mm dia Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but fixed to walls & fixing with clamps, complete all as specified & directed.

S&F 100 bore, CI bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door, complete all as specified & directed.

S&F 75 bore, CI bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door, in repair complete all as specified & directed.

M&L for 100mm dia of CI floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified & directed.

M&L for 75mm dia of CI floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified & directed.

Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc complete all as specified and directed.

S & F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps as directed 6 Kg/Sq cm, complete all as specified & directed.

S & F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring laid in floor as directed 6 Kg/Sq cm, complete all as specified & directed.

S & F in repair 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes complete all as specified & directed.

M&L for 100mm dia of PVC (SWR) floor trap plain with grating incluing jointing with solvent cement in repair complete all as specified & directed.

M&L Vitrified ceramic light shade tiles of 7-8 mm thick (square/rectangular) area of each tile not exc 0.36 sqm in floors set and jointed over and including cement screed bed 15mm in CM 1:4 and pointed in white or coloured cement to match including dismantling existing floor tiling and cement mortar bedding (but not backing) and removing rubbish from the site etc complete all as specified and directed Engineer-in-Charge

M&L for 15 mm thick Screed bed or bedding layer in CM (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified.

M&L non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm in floors, including dismantling existing floor tiling and cement mortar bedding (but not backing) and removing rubbish from the site etc complete all as specified and directed.

M&L Non skid Group V ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm. in floors including dismantling existing floor tiling and cement mortar bedding (but not backing) and removing rubbish from the site etc complete all as specified and directed.

M&L for granite work 14-18 mm thick (table rubbed and polished) as in cooking platforms, steps, landings ,jambs and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including dismantling of existing floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing removing rubbish from the site complete all as specified and directed.

Roundening to the edge of stone slabs on edge such as plateform,steps and other similar situations, complete all as specified & directed.

M&L for marble work (Udaipur green slabs) 14-18 mm thick (table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade and roundening to the edge of stone slabs on edges including dismantling of existing floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing removing rubbish from the site etc. complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 18-22mm thick over cement screed base laid and jointed With grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling existing flooring and cement mortar bedding (but not backing) and removing rubbish from the site complete all as specified and directed.

M&L for Machine cut kota stone 18-22mm thick in riser of steps skirting dado, pillar etc over cement screed base laid and jointed With grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling existing and cement mortar bedding (but not backing) and removing rubbish from the site complete all as specified & directed.

M&L for 10 mm thick rendering in cement mortar 1:4 and finish the surface rough to receive the tile etc complete all as specified.

S&F non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm on vertical surfaces such as skirtings including dismantling existing skirting including cement mortar screeding including racking out joints hacking for key and scrubbing etc and removing rubbish from the site etc complete all as specified.

S&F vitrified ceramic light shade tiles of 7-8 mm thick (square/rectangular) area of each tile n.exc 0.36 sqm on vertical surfaces such as skirtings including dismantling existing skirting including cement mortar screeding including racking out joints hacking for key and scrubbing etc and removing rubbish from the site etc complete all as specified.

S&F glazed ceramic coloured tiles 7mm thick 450 x 300mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade. including dismantling existing wall tiling including cement mortar screeding including racking out joints hacking for key and scrubbing etc and removing rubbish from the site etc complete all as specified and directed Engineer-in-Charge

M&L in repair double action floor spring hydraulically regulated made up of minimum. 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot of brass, other part made of MS heavy duty and fixed complete all as specified and directed.

S&F in repair MS 2 lever Mortice lock 65mm size complete all as specified and directed.

Taking up or down GI tubing 15 mm bore pipe including cleaning for re-fixing or removal from site, complete all as specified & directed.

S&F GI tubing 15 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified & directed.

Refixing only old GI tubing 15 mm bore pipe and connections in new or old position as on walls, ceiling, floors etc all as specified & directed.

Taking up or down GI tubing 20 mm bore pipe including cleaning for re-fixing or removal from site, complete all as specified & directed.

S&F GI tubing 20 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified & directed.

Refiing only old GI tubing 20mm bore pipe & connection in new or old position as on wall, ceiling, floor etc all as specified & directed.

Taking up or down GI tubing 50 mm bore pipe including cleaning for re-fixing or removal from site, complete all as specified and directed.

S&F GI tubing 50 mm bore medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 50 mm complete all as specified & directed.

Refixing only old GI tubing 50 mm bore pipe and connections in new or old position as on walls/ ceiling/ floors etc complete all as specified and directed.

S&F in repair gun metal gate valves with iron wheel head 50mm complete all as specified & directed.

M & L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in coping steps bed blocks etc, complete all as specified & directed.

Demolition of RCC of any description such as Kitchen chimney, chajja, shelves, OHT Tanks,Pilar,wall, column.beam etc and in any position not other wise specially provided for complete all as specified and directed(reinforcement cut as required to facilitate demolition)

M&L for RCC 1:2:4 type B-1 (using 20mm graded aggregate) as in slab supported on walls beams and columns in floor, roof, landing and in shelves and the like, complete all as specified & directed.

M&L mild steel TMT bar 10mm dia and over cut to length bent to shape required including cranking bending spirally and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified & directed.

M&L mild steel TMT bar 6mm to 8mm dia and over cut to length bent to shape required including cranking bending spirally and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified & directed.

Use & waste of Form work to sofites of suspended slab such as roof slab, floor slab , landing, and similar work for rough finish surface, complete all as specified & directed.

Demolition of brick work of any type built in cement mortor in foul condition etc complete all as specified & directed.

M&L for brick work built in cement and sand mortar 1:6 with sub class 'B' old size bricks straight or curved on plan exceeding 6m means radius complete all as specified & directed.

M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, in half brick thick built in cement mortar 1:4, complete all as specified and directed.

Dismantling water tanks and removing from site 500 ltr capacity complete all as specified & directed.

Dismantling water tanks and removing from site exc 500ltr & n.exc 1000 ltr capacity, complete all as specified & directed.

S&F 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

-Ditto-all as per item No.146 but 1000 ltr capacity.

S&F in repair 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & highdesity plastec ball screwed for iron pipe and fixed complete all as specified & directed.

S&F in repair gun metal gate valves with iron wheel head 15mm complete all as specified & directed.

S&F in repair gun metal gate valves with iron wheel head 20mm complete all as specified & directed.

M & L for PCC (1:4:8) type D-1 (using 40mm graded aggregate) 50 MM thick as in plinth protection and path all as specified & directed.

Surface dressing n. exc 15 cm deep and getting out in soft/loose soil as in road side berms, complete all as specified & directed.

M&L for hard core of broken bricks gauge n.exc 63 mm, deposited, spread and levelled in layers in exc 15 cm thick. Watered and rammed to true surface complete all as specified & directed.

M&L for 60mm thick factory made precast cement concrete interlocking pavers/tiles of size and colour as directed in floors over & including 25mm thick sand beding etc complete all as specified and directed.

M&L in repair PCC 1:2:4 type B1 (20mm graded aggregate) as roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified & directed.

M&L flush pointing to brick tiles/brick laid flat as in roof, paving/floor etc in CM 1:3 mixed with 5% of crude oil by weight of cement and including raking out joints/pointing etc; complete all as specified & directed.

S & F in repair floor door stopper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring all as specified & directed.

M&L welding in repairs with thickness of metal not exceeding 6mm and not exceeding 2.5 cm in length etc complete all as specified and directed.

S & F in repairs Jet spray, CP, brass body with wall hook and 1 mtr SS pipe complete all as specified & directed.

S & F in repairs plastic water closet seat cover, white/ivory colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified & directed.

S & F in repairs 32/40mm waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified & directed.

S & F in repairs 40/50 mm waste fittings for stainless steel sink (sink coupling), brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified & directed.

S&F in repairs PVC waste pipe with socket suitable for connection to Waste fittings of 32/40mm dia, and of length minimum 75 cm all as specified & directed.

Excavation in trenches n.exc 1.5m wide & n.exc 1.5m deep for foundation, etc. or for repair of shafts, wells, cesspits, manholes, etc. not exc 10 Sqm on plan and not exc 1.5 m depth & getting cut in soft/loose soil complete all as specified & directed.

Returning filling in including spreading, levelling, watering & well ramming in layers not exceeding 25cm thick all as specified & directed.

Removal of excavated material to a distance exceeding 250m & deposited where directed at level not exceeding 1.5m above the starting point, complete all as specified & directed.

S&F in repair Mild steel, 150 mm, helical door spring including roller and roller plate, ISI marked, complete all as specified & directed.

S&F MS stove enamelled handles grip length not less than 100 mm, left/right including handle plate suitable for steel windows with and including all fixing acessories welding working, IN REPAIR, complete all as specified & directed.

S&F MS stove enamelled peg stay 30 cm long suitable for steel windows with and including all fixing acessories, IN REPAIR, complete all as specified & directed.

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges in large patches as in roof covering complete all as specified and as directed.Note:- opening of existing wind tie where required for taking down of AC sheet is included) complete all as specified and directed.

Refixing of old AC corrugated or semi corrugated sheet as in roof covering/ ridge fixed L-type or J- type or cranked hook bolts complete all as specified and directed.

S&F 5-6mm thick. AC corrugated or semi corrugated sheet as in roof covering fixed L-type or J- type or cranked hook bolts complete all as specified and directed.

S&F 5-6mm thick. AC plain sheet as in roof ridge fixed L-type or J- type or cranked hook bolts complete all as specified and directed.

Dismantling of plain or corrugated Steel sheeting any gauge, thickness as in roof covering /ridge complete all as specified and directed.

S&F Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.45 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as spd complete all as specified and directed.

S&F Pre painted galvalume aluminum zinc coating GI based plain steel sheet 0.45 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and directed.

Dismantling timber scanting 40 Sqcm and over in section in any position framed work complete all as specified & directed.

Dismantling framed steel trusses work in any position n exc 10m span complete all as specified & directed.

S & F Steel work in tubular/rectangular MS Pipe such as vertical post,trusses, rafter, purlins etc. including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St-240 complete all as specified and directed.

S&F for Plates (Plain or chequered) channels,squarecut or notched (ordinary and counter sunk) forming holes, w/o any attachment conforming to FE-410-W( Gde-E-250 )quality -A complete all as specified and directed.

S&F for joist,channel, angles or tees with web and flanges cut to shape drilled and counter sunk for screw, including bending and welding angles as necessary, gusset plates, riveting etc. n.exc 10 kg each brackets conforming to FE-290 Gde-E-165), complete all as specified & directed.

S&F in repair PVC strip to cover the top of MS railing in staircase to match with existing one and fixed complete all as specified and directed.

M&L for grinding and plishing of old existing treated terrazzo topping/marble/kota stone flooring including treating the surface with wax polishing etc complete all as specified and directed.

NAV NIRMAN BUILDER

M/s Balvinder Singh Engineer and Contractors

M/s Verma Construction Company

RINKU BROTHERS

M/s Abnash Kumar Bholla

Aman Enterprises

M/s Luxmi Constructions

M/s RAMESH KUMAR VERMA CONTRACTORS