CONST OF 02xIGLOOS 25 MT NEC FOR UNHD 1.1 AMU INCL ALLIED INFRA AT 103 AP, RAKHMUTHI

Amount

Total Amount of Sch 'A' Part - I (Building Work)

Total Amount of Sch 'A' Part - II (Site Clearance and Site development work)

Total Amount of Sch 'A' Part - III (Road, Path and Culvert)

Total Amount of Sch 'A' Part - IV (Area Drainage)

Total Amount of Sch 'A' Part - V (External Electrification)

Total Amount of Sch 'A' Part - VI (External Water Supply)

Total Amount of Sch 'A' Part - VII (Lightening Protection)

Total Amount of Sch 'A' Part - VIII (Fire Point)

Total Amount of Sch 'A' Part - IX (Sign Board)

Total Amount of Sch 'A' Part - X (Fire Seal)

Total Amount of Sch 'A' Part - XI (Protective Work)

Total Amount of Sch 'A' Part - XII (Internal Electrification)

Sch 'A' Part - XIII (Misc Items work) Note : This Schedule is not Pre-Priced by MES and the Pre-Priced rate indicated as "Rs. 0.00" under col.5 signifies this fact only.

Precast cement concrete cubes using M-20 (design mix) of size 250mm x 250mm x 250mm as in dunnage blocks complete all as specified and as directed .

Flame proof type, CMRI certified, IP 65 protected, bulk head light 15W fixture with die cast aluminium housing and heat resistant glass indoor type fittings and including connecting up with twin core twisted copper conductor of suitable size, complete all as specified and as directed. Make:- Cromption Cat Part No IBFN 100-15-CDL or equivalent model of Philips/Bajaj/Wipro/GE/Syska/Sudhir.

Flame proof, weather proof distribution board, 6 way with and including accumulated flame proof 03 Nos MCB SP 6-16 Amps, 10 KA and 1 No of MCB SPN 32 Amps, 10 KA alongwith weather proof cover for DB, complete all as specified and as directed.

Cutting existing steel tubing in position for alteration or addition including screwing of 50mm bore pipe as in main line including provn of new Tee of suitable size complete including excavation and earth work all as directed.

Brick masonary valve pit of size 60cmx60cmx60cm (Internal dimensions) including excavation and earthwork in any type of soil, brick work in CM (1:4), plastering all wall surfaces internally and flush pointing to brickwork externally as the work proceeds complete including angle iron 40x40x6mm frame, MS sheet cover 3mm thick with 12mm dia handle, locking arrangement and painting with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as shownn on drawing as specified.

LT distribution panel board, outdoor, cubical type, floor mounted fabricated out of MS sheet 3.15mm thick and angle iron frame of size 50x50x6mm, 90cm height complete with 4 Nos Copper Bus Bar 3 phase, 200 Amp mounted on porcelain insulators suitably spaced in totally enclosed chamber, wiring the panel board with suitable size PVC insulated copper cable and painting internallly and externally with two coats of synthetic enamel paint over a coat of red oxide primer and embeded in brickwork in CM 1:4 not less than 45 cm above ground level with suitable foundation for fixing panel of required size in ground with nuts, bolts and washer etc. complete comprising of following:- Incoming:- (a) MCCB, 4 pole, 415 volts, current rating 32 Amp, 10 KA breaking capacity - 01 No. Outgoing:- (a) MCB, TPN, 415 volts AC, current rating 6-32 Amp, 10KA-01 No for street light. (b) MCB SPN, 6-32 AMPs, 10KA-5 Nos (2xIgloo, 2xSiren & 1x Spare). (c) Multi function meter. (d) Indicator lamp LED type (R, Y, B) complete with bakalite fuse fitting - 01 Set (e) Analog Timer Switch with battery backup.

Junction box water proof outdoor type made out of SMC of external dimensions 250x250x150mm, sigle door type hinged with locking arrangement front operated with one number MCB 06 Amps capacity for housing 3 phase and neutral busbar including connecting the incoming/outging cables including cable glands , SMC coated coated clamps, nuts and bolts etc. all as directed and fixed to existing poles with mild steel flat of size 25mm x 4mm. Make: Sintex Cat Part No. GSJB 2520 or eqivalant in other approved makes

LED street luminaries, 70/72 watt, powder coated pressure die cast aluminium housing with weather proof gasket of lamp and driver compartment with 120 degree view angle, lumen output > 100 Lum/watt, lumen maintenance > 70% at 50000 hours, colour temp 5000-6500K, CRI > 70, THD < 15%, PF > 0.95 and LM 80 test complaince. The driver must be inteated APFC circuit protection, reverse polarity protection against 5KV high and comply with IEC:60598-1, IEC:61000-3-2, IEC:61547. The luminaire must have secondary optics with perfectly matched lens for better light control with and including brackets made of GI pipe of suitable dia light grade, bend to shape at an angle of 65120 degree not less than 1.2mtr long with 2 Nos. of M.S clamp fabricated out of MS flat of size 50 x 6 mm on pole, including nuts, bolts, washers etc and making electrical connections with 1.5sqmm sheathed copper conductor flexible wire of suitable length drawn into suitable size steel conduit with 03 Nos clamps from steet light to junction box, complete all as. specified and as directed.

Electric motor siren, ideal audible range (diametrical) 3.25 Kms, Motor HP-0.50, RPM-8000, single phase, 220/240 volts AC, copper winding, aluminium casting body, double mounting, horizontal fitment, alongwith spring return push botton with element with box and fixed, complete including suitable size 3 core wire in steel conduit from siren to push button and fixing clamps, etc all as specified and as directed.

Thermometer having function of of wet bulb and dry bulb and fixed, complete all as directed.

RCC culvert of 90cm span & 7.00 mtr width PCC 1:4:8 in foundation, brick work with sub class B bricks in cement mortar 1:4, RCC M-25 (Design mix) in slab including reinforcement form work, earth work in any type of soil stc. complete all as shown in drawing No CEUZ/TD-1117/95 sheet 1/1

Dry lean concrete 100 mm thick (compacted thickness) having compressive strength 10N/Sqmm at 07 days) (using min 250 Kg /Cum OPC 43 grade) using grading as per Morth specification and as per mix design as in sub base of hard standing, spread rolled and formed or consolidated to required gradient, camber using mechanical paver and tenden vibratory roller with 8 to 10 tonne power roller complete all as specified and as directed.

Providing 125 main thick polythene film over and including 25 mm thick sand cushioning complete all as specified and as directed.

LED tube light fitting flame proof type, CMRI certified, IP 65 protected, 2x16/20 watt including integral reflector made of aluminium alloy LM6 complete with all accessories prewired and including connecting up with three core flame proof copper conductor of suitable size, complete all as specified and as directed. Make : Crompton Cat Part No EXTN2LT8-16/20 or technically and commercially equivalent model of Bajaj/Sudir as approved by GE.

Dedction to be made from BOQ for Sch. 'A' Part- XIV (credit Schedule for dismantling/demolition) woth Rs 20,293.00 during AOC Note:- Tenderes shall not quote for this schedule

M/S BHATIA BUILDERS AND CONTRACTORS

R R CONSTRUCTION

SHARMA CONSTRUCTION COMPANY