Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹69.0 LAccepted-AOC | L1 | Accepted-AOC Reasonable rate | |
| 2 | L2₹72.6 L+₹1.9 L (2.71%)Rejected-Finance MIL STN AGARTALA | L2 | Rejected-Finance Quoted amount higher than L1 | |
| 3 | L3₹72.8 L+₹2.2 L (3.08%)Rejected-Finance | L3 | Rejected-Finance Quoted amount higher than L1 | |
| 4 | L4₹73.1 L+₹2.4 L (3.40%)Rejected-Finance | L4 | Rejected-Finance Quoted amount higher than L1 | |
| 5 | L5₹73.2 L+₹2.6 L (3.62%)Rejected-Finance | L5 | Rejected-Finance Quoted amount higher than L1 |
Tender Value
₹71 L
EMD Value
₹1.3 L
Closing Date
19 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ 137 WKS ENGR
HQ 137 WKS ENGR PIN 914137 CO 99 APO
SPL REPAIR AND ADDN ALTN TO BLDG NO OR 4 P63 08 X OR MD ACCN IN ZONE E AT MIL STN AGARTALA
2023_MES_613576_1
8801/E8
Open Tender
Civil Works
Item Rate
270 days
Agartala
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
AGE (I) Agartala
₹1.3 L
Yes
2 Dec 2023
12 Aug 2023
26 Sept 2023
12 Aug 2023
19 Sept 2023
5 Sept 2023
Amount
Demolition of stone slabs & tiles of any description or thickness in floor, aprons etc laid bedded or pointed in any mortar complete all as specified and as directed.
Material and labour for 15 mm thick screed bed or bedding layer in CM 1:4 mixed with water liquid proofing compound @ 200 ml per bag of cement on concrete roof surface, finished the surface fair and even to maintain the proper slope of roof surface complete all as specified and as directed. (Note: Liquid WPC shall be measured and paid separately)
Material and labour for PCC (1:2:4) type B0 (using 12.50mm graded stone aggregate) as in levelling course on roof surfaces and the surfaces finish as even and rough complete all as specified and as directed.
M & L for cleaning plastered surfaces to receive the water proofing membrane, applying one coat of hot paving bitumen of penetration value 85/25 conforming to IS 73 @ 1.20 kg/sqm over a coat of bitumenous primer @ 0.30 ltrs per sqm and applying a layers of APP based polymeric membrane, 3mm thick (minimum) weight 3.00 Kg/sqm reinforced with polyster non woven fabric (weighing not less than 150 gms/sqm) shall be applied over Bitumenious primer (Application of polymeric memberane shall be by torch application, over laps shall be minimum 100mm on the transverse direction & 75 mm on the longtudinal direction) polymeric membrane shall be taken to a height of 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by membrane flashing, coved fillet in PCC (1:2:4) type B-0 of radius 75 mm shall be provided at the junction of roof & other vertical surfaces & surfaces shall be painted with hot paving bitumen of penetration value 85/25 conforming to IS 73 @ 1.20 kg/sqm & applying one coat of aluminium paint over the APP nmodified membrane @ 0.11 kg/sqm complete all as specified and as directed.
Dismantling of AC (corrugated, semi corrugated etc) roof sheets including ridge and valley etc as in roof covering and removing unserviceable materials from site of work complete all as specified and as directed.
Supply and fixing 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed.
Supply and fixing 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed.
Material and labour for preparation of old decorated steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
Material and labour for roughening surfaces of old concrete floor by wire brushing, picking, sweeping cleaning and washing down with water to remove dust etc and brushing with neat cement slurry 3 Kg per sqm complete all as specified and as directed.
Material and labour for non skid ceramic coloured tiles (Premium Quality) 7 to 8mm thick (Square/ rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by AGE(I).
Material & Labour non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) of premium quality, area of each tile exceeding 0.18 sqm but not exc 0.38sqm on skiriting/dado, set & jointed in neat cement slurry & pointed with white/coloured to match over backing coat of 10mm thick in cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by AGE(I).
Material and labour for non skid ceramic coloured tiles (Premium Quality) 7 to 8mm thick (Square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by AGE(I).
Material and labour for glazed ceramic coloured tiles (Premium Quality) of size 450X300X7MM thick as on vertical surfaces, set and jointed in neat cement slurry and pointed in white cement with pigment to match with the shade of tiles laid over and including 10mm thick cement plaster in CM (1:4) complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by AGE(I).
Material and labour for 20mm thick of size 550 X 550mm size machine cut kota stone slab flooring over and including 20mm thick screed bed in cement mortar (1:4) mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. Note: The colour / shade / design of stone slab shall be as approved by AGE(I).
Material and labour for 20 mm thick machine cut kota stone slab on verticle surface as skirting/dado/riser over and including 10mm thick cement plaster in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. Note: The colour / shade / design of stone slab shall be as approved by AGE(I).
Material and labour for 25mm thick, PCC (1:2:4), type B0, (using 12.50mm graded stone aggregate) as in sub base of floor and finished the surface even and rough complete all as specified and as directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removal of rubbish from the site complete all as specified and as directed.
Material and labour for 100mm thick PCC (1:3:6) type C-2 (using 40mm graded brick aggregate) as in filling of low laying area and pathway etc finished rough without using extra cement complete all as specified and as directed.
Material and labour for pre-polished machine pressed chequred tiles 30cm x 30cm x 22-25mm thick, in floor, set jointed and pointed in grey cement with pigment to match the shade of tiles over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed.
Material & Labour for 75mm thick, PCC 1:3:6, Type C-1, using 20mm graded aggregate as in plinth protection etc surface finished even and smooth without using extra cement and providing necessary joints 10mm wide to the full depth of PCC at every 3 meters and every change of directions and the joints duly filled with mastic filling comprising of 01 Part of heated bitumen blown grade any penetration and 3 parts of sand [all by weight] complete all as specified and as directed.
Material and labour for PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in surface channel/drain etc complete all as specified and as directed
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred /stopped ends etc complete all as specified and as directed.
.-Ditto- all as per item No 23.00 above but add or deduct for each 25mm girth or part there of over or under 30cm and -ditto-.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilitate demolition and removing debries from site of work complete all as directed.
Material and labour for RCC (1:1.5:3) type B1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
Material and labour for rough finished formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.
Material and labour for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed.
Material and labour for cutting holes into or through brick walls built in cement mortar or cement lime mortar & stone walls built in lime mortar and making good in CM (1:3) or PCC (1:2:4) type B-1 as required superficial area not exc 150 Sq cm complete all as specified . Note : Cutting chases and pinning in should be carried out by mechanical mean only.
Material and labour for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms,corner shelf, flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 20 mm thick cement plaster (1:4) including rounded the exposed surfaces of granite complete all as specified.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed.
Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
Materials and labour for half brick thick brick work with sub class 'B' bricks straight or curved on plan to any radius built in cement mortar (1:4) complete all as specified and as directed.
Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.
Materials and labour for 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:4) in two separate coats (10mm thick backing coat and 5mm thick finishing coat). Finishing coat shall be mixed with liquid water proofing compound @ 200 ml per bag of cement and finished the surfaces even and smooth without using extra cement complete all as specified and as directed. Note : Liquid WPC will be measured and paid separately under respective items.
Materials and labour for 15 mm thick rendering on other than fair faces brick work in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.
Materials and labour for 5 mm thick rendering on cement concrete surfaces as in ceiling, chajja etc in cement mortar (1:3) and finished the surfaces fair and even without using extra cement complete all as specified and as directed.
Materials and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new plastered surfaces with preparation of new plastered surfaces complete all as specified and directed.
Materials and labour for complete removal of external wall finishes by scrapping down and finishing wall applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old plastered surfaces with preparation of old plastered surfaces complete all as specified and directed.
Materials and labour for preparing newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer, over 2 mm thick cement based wall care putty on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the wall surfaces complete all as specified and as directed.
M & L for Complete removal of existing treatment of any description on wall surfaces and applying 2mm thick Cement based Wall Care Putty on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of Oil Bound Distemper over one coat of primer on wall surfaces complete all as specified and as directed.
Materials and labour for preparing newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed.
Material and labour for preparation of old decorated plastered ceiling surfaces and applying two coat of white wash complete all as specified and directed.
Materials and labour for Writing letters or figures [Block, Roman, Italic or Indian] not exceeding 30 cm high with thick paint to stand out boldly and solidly without showing signs of brush marks complete all as specified and as directed.
Supply only liquid water proofing compound complete all as specified and directed.
Dismantling of wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.
Materials and labour for preparing new ceiling surfaces and applying two coats of oil bound distamper over a coat of primer on board complete all as specified and as directed.
Supply and fixing of 4mm thick asbestos cement plain building boards, fixed to timber framework with screws complete all as specified and as directed.
Supply and fix rolled mild steel section in joist, channel, angle or tee sections, fixed independently,without connecting plates, etc.(cut to ordinary lengths i.e., within 20 mm of the length indicated) conforming to Fe-410-W(Gde-E-250) quality-A grade complete all as specified and as directed.
Material and labour for preparation of steel surface over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
Taking down chowkat with shutter without taking off shutter from the frame exc 1.50 Sqm but n.exc 4.00 Sqm each complete all as specified and as directed.
S&F for pressed steel frames 1.6mm thick for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x60 mm complete all as specified and as directed.
S&F for pressed steel frames 1.6mm thick for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x60 mm complete all as specified and directed.
Materials and labour plain cement concrete in bed block and filling of door frame type C-0 1:3:6 (12.50 mm graded stone aggregate) complete all as specified .
Supply and fixing for 30mm thick factory made flush door shutters solid core construction with block board core and ply wood face panels commercial type on both faces complete all as specified and as directed.
Supply and fixing 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and as directed.
Supply and fixing well-seasoned 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.
Material and labour for cutting holes in brick work , built in cement mortar depth of cutting exc half brick but not exc one brick and making good the surfaces in PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) after fixing of hold fasts/ lugs and like etc complete all as specified and as directed. Note : Cutting hole should be carried out by mechanical mean only.
Supply and fixing mild steel bands, straps, supports or stays for clamps, hold fasts, wall ties and other similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.
Material and labour 25mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws for cubboard shutters complete all as specified and as directed.
Supply and fixed 18/19mm thick, prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails in cupboard partion etc or in narrow widths n exc 15cm each, rebated or flat edged complete all as specified and as directed.
Material and labour for external teak wood lipping, 6mm thick fixed with nails complete all as specified and as directed.
Material and labour for well-seasoned 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exc. 13 sqcm but not exc.25 Sqcm complete all as specified and as directed.
Taking down chowkat with shutter without taking off shutter from the frame n exc 1.50 Sqm each complete all as specified and as directed.
Supply and fixing factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed.
Supply and fixing of factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles) with particle board core, with 2, 4, or 6 raised panel design with 2mm thick moulded prelam PVC Sheet on the front face & 2mm prelam PVC sheet on back face complete all as specified and as directed.
Supply and fixing continuous (piano) hinges, width of flaps (when open) 30mm, mild steel, bright finish or electrogalvanised complete all as specified and as directed.
Supply and fixing of 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
Supply and fixing 150mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified and directed.
Supply and fixing 125mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified and directed.
Supply and fixing 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.
Supply and fixing 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.
Supply and fixing 100mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.
Supply and fixing aluminium alloy, anodised, sliding door bolt of size 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
Supply & fixing 40mm dia copboard knobs fixed with nut, screw and washer of brass polished. complete all as specified and as directed
Supply & fixing hasp and staple of size 100 mm, safety type of aluminium anodised including bolt to hinge plate, fixed with screws complete all as specified and as directed.
Supply and fix in repair 100 mm size type B-21, Butt hinges, heavy weight, cold rolled mild steel with galvanised MS sheet hinges pin anodised complete all as specified and directed.
Supply and fix in repair 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.
Supply and fix in repair 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
Supply and fix in repair aluminium alloy, anodised, sliding door bolt of size 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
Dismantling timber boarding of any description fixed in any position complete all as specified and directed.
Material and labour well-seasoned second class hard wood Weather boarding, clean sawn, plain both side, fixed with butt joints with nails, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified and as directed.
Material and labour for preparation of new wooden surface exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
Material and labour for preparation of old decorated wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Supply & Fix in repair 25mm dia mild steel chromium plated curtain rod fixing with brackets, stop, rollers etc complete all as specified and as directed.
Supply and fixing powder coated (minimum 50 micron thick) aluminium sliding type, three track window (two glazed and one gauged shutter), aluminium section weighing not less than 1.67 kg/m for frame and 0.55 Kg / for shutter including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as suitable handle (1 no.) and 4.00mm thick tinted glass and aluminium alloy wire cloth,0.45mm nominal dia of wire and average width of aperture 1.40mm complete all as specified complete all as specified and as directed. (Note: Window opening size to be measured for payment purpose.)
S&F Powder coated aluminium louvered ventilators of size 600X600mm with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazing cleats, rubber packing , anodised aluminium snap beading,screws, anodised aluminium fittings and 4 mm thick frosted glass fixed in panels with suitable locking arrangements and making good the surface complete all as specified .
Supply and fixing in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
Supply and fix mild steel work such as grills,gratings, guard bars etc and similar work conforming to Fe290 GDE E-165 complete all as specified and as directed.
M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, n exc 10cm width or girth including preparation of new surface & applying one coat of red oxide primer complete all as specified and as directed. .
Demolition of unreinforced cement concrete in ground floors and Pavings any description below or above ground level] and removing rubbish to a distance exceeding 150M but not exceeding 250 M complete all as specified and as directed.
Material and labour for PCC 1:5:10 type E2, using 40 mm graded stone aggregate as in sunken floor complete all as specified and directed.
Material and labour for 20 mm thick cement plaster in CM 1:4 mixed with Water proofing Compound @ 3% and applying water proofing treatment on sunken portion with acrylic based polymer modified cementitious composite compound as approved by GE and applying cement slurry two layers i.e. 1st layer @ 0.488Kg/ Sqm mixed with composite compound @ 0.253 Kg/Sqm & 2nd layer @ 0.242Kg/ Sqm mixed with composite compound @ 0.126 Kg/Sqm and applying 200 micron polyfilm with adhesive complete all as specified and directed. Note: Minimum 4 hours gap for air curing will be maintained between 1st layer and 2nd layer.
Supply and fixing in repairs Vitreous China squatting pan of ‘Orissa pattern’, size 580 mm x 440mm (white) with ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern complete including provision of PCC bedding and connection to trap, flushing pipe, antisyphonage pipe, etc. including making good the disturbed floor complete all as specified and as directed.
Supply and fixing in repairs 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs vitreous china WHB of size 450x300mm including waste fittings, brass, chromium plated with long screwed shanks and flynuts, flange end bedded in red lead cement and other end fixed etc complete all as specified and directed.
Supply and fixing in repair low density polythene (LDPE) pine of pressure rating 6 Kg/Sq cm bore of tube 32 mm for waste pipe of WHB or sinks etc complete all as specified directed.
Supply and fixing in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
Supply and fix in repair pillar taps 15mm dia bore fancy type with capstain heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified directed.
Supply and fixing in repairs 15mm bore stop valve fancy type,chromium plated , screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.
Supply and fixing in repairs Brass Chromium Plated Tubular Towel Rail, 20mm dia, D Type, 600 mm long between flanges complete all as specified and as directed.
Supply and fixing in repairs 15mm bore fancy type chromium plated bib taps with crutch of butterfly handle screwed down for iron pipes complete all as specified and directed.
S&F 15mm bore brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all specified and directed.
Supply and fixing as in repair 125mm dia chromium plated shower rose with revolving joints fixed to 15mm bore GI Pipe complete all as specified and as directed.
Supply and fixing in repairs soap dish viterous china of approx size 160x160x90mm complete all specified and as directed.
Supply & fixing in repairs 75 mm dia out let, PVC (SWR) floor Trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4, Type B-1 complete all as specified and as directed.
Supply and fixing in repair low density polythene (LDPE) pipe of pressure rating 6 Kg/Sq cm bore of tube 50 mm complete all as specified directed.
Taking up or down 20mm bore steel water tubing & connections complete all as specified and as directed.
Taking up or down 15mm bore steel water tubing & connections complete all as specified and as directed.
Supply and fix 20mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc any type of pipe complete all as specified and as directed
Supply and fixing 15 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc any type of pipe complete all as specified and as directed
Material and labour for cutting chases in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing or concealed conduit wiring, etc, cutting not exc 10 cm girth complete all as specified and as directed. Note : Cutting chases and pinning in should be carried out by mechanical mean only.
Supply & fixing in repair stainless steel plate rack of size 31'' x 36'' x 10'' made of min 1mm thick stainless steel sheet complete all as specified and directed.
Supply and fixing as in replacement stainless steel (conforming to AISI-304 grade) kitchen sink with drain board of overall size 915mm x 460mm and bowl size 410mm x 310mmx 160mm depth or equivalent made of min 1mm thick stainless steel sheet with 32mm bore CP waste coupling, 32mm bore PVC waste pipe(heavy duty) 90 cm long, and bedded in cement mortar and fixed on MS cantilever brackets, complete all as specified and as directed.
Supply and fixing 500 ltrs capacity triple layer rotational moulded polythene water storage tanks (Cylindrical vertical with closed top) hoisted & fixed in position including dismantling water tanks complete all as specified directed.
Supply and fixing 20 mm bore ball brass valve high pressure with polythene float & fly nut compelete screwed for iron pipe or brass ferrule complete all as specified directed.
Supply & fixing in repairs gun metal gate valve 20mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and directed.
Taking down PVC soil pipe with fittings from wall, treches of any description including fittings complete all as specified.
Supply and fixing 75 mm bore dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.
Supply and fixing 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.
Supply and fixing 75 mm bore PVC (SWR) bends in any types complete all as specified and directed.
Supply and fixing 110 mm bore PVC (SWR) bends in any types complete all as specified and directed.
Supply and fixing 110 mm bore PVC (SWR) bends in any types with acess door complete all as specified and directed.
Supply and fixing 75 mm bore PVC (SWR) bends in any types with acess door complete all as specified and directed.
Supply and fixing 110mm dia PVC (SWR) branch piece single (single 'Y'/T) equal or unequal with acess door complete all as specified and as directed.
Supply and fixing 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.
Demolition and breaking up 100 mm dia internal dia bore drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.
Material and labour for 100mm thick concrete bed to drain pipe (150 mm bore) with PCC (1:4:8) type D2 using 40mm graded stone aggregate including packing under and haunching aginst the sides of pipe after they are laid jointed and tested complete all as specified .
Material and labour Salt- Glazed stoneware drain pipes 100mm bore laid in trenches and jointed complete all as specified .
Material and labour for salt-glazed stoneware gully traps, square or round mouthed, type `P' 150x100mm complete all as specified.
Material and labour for treating the soil along with external perimeter of building @ 2.25 litre of anti termite chemical emulsion / m of the perimeter wall complete all as specified .
Material and labour for treatment of soil under existing floors using anti termite chemical emulsion @ 01 litre / hole, 300mm apart including drilling & plugging 12mm dia holes with CM (1:2) to match the existing floors complete all as specified .
Taking down carefully existing copper/Aluminum point wiring (light,socket or power) complete including fittings such as switches, ceiling roses, pendents, sockets, boxes, light fitting etc and removing from site and making good disturbed surfaces of walls, floors etc complete all as specified and as directed.
Material and labour for point wiring (concealed type) for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of GI boxes of thickness not less than 0.8 mm thick and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one way switch complete all as specified as directed. Note for item Nos.135 to 141: (i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate (iii) Cost of chase cutting for conduit wiring shall be included in the qouted rate .
.-Ditto- all as per item No 135.00 here-in-before but for 3 pin 6 amps socket outlet on the same board .
.-Ditto- all as per item No 135.00 here-in-before but for 3 pin 6 amps socket outlet on the independant board
All as per item No 135 above but for one 3 pin 6 Amps socket outlet on the independent but below the switch board of light points in the same vertical plane wall.
All as per item No 135 above but for one call bell point controlled by one bell push.
All as per item No 135 above but for one light point controlled by two 2 way switch complete all as specified and as directed.
Material and labour for point wiring (concealed type) with PVC insulated 1100 volts grade FRLSH unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of GI boxes of thickness not less than 0.8 mm thick and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one way switch complete all as specified as directed.
Material and labour for switch socket combination multi purpose 2 in 1, 5 Pin,5 and 15 Amps, flush type ISI marked complete all as specified and as directed.
Supply and fixing Buzzer, Ding dong AC, 230 Volts, Single Pole complete all as specified and as directed.
Supply and fixing piano bell push 6 Amps, 230 volt flush type complete all as specified and as directed.
Supply & fixing switch piano flush type ISI marked, single pole, one way 5 Amp, 240 Volts complete all as specified & directed.
Supply and fixing switch socket combination out let 5 Pin, 6 Amps flush type complete all as specified and as directed.
Supply and fixing switch flush type, 6 Amps, single pole, two way complete all as specified as directed
Supply and fixing socket out let 5 Pin, 6 Amps flush type complete all as specified and as directed.
Supply and fixing ceiling rose, PVC/polycarbonate, isolated body surface bakelite, 65mm x 50mm, ISI marked three terminals complete all as specified & directed.
Supply and fixing electronic fan regulator (step rotary type), AC 240 volt complete all as specified and as directed.
Supply and fixing in repairs MCB DB, SPN, 8 Way, 240 Volts, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs flush conceal in wall including making good disturbed surfaces complete all as specified and as directed.
Supply and fixing MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'B' series with all incoming / outgoing connections with proper size of lugs complete inculding taking down the old unserviceable one all as specified as directed.
Supply and fixing MCB, single pole & neutral having braking capacity 10 KA, 'B' series with all incoming , outgoing connections with proper size of lugs , 6 to 32 Amp, 240 volts including taking down the old unserviceable complete all as specified & directed. Note : MCB and MCB DB shall be of same make as approved by AGE (I).
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete complete including taking down old unserceable light fitting all as specified and directed.
Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire of 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion including taking down old unserviciable earthing set all as specified and as directed. Notes:- (i) Main earthing strip from earth plate electrode to rest point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra payment from the department.
M & L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm (Nominal area) concealed through 20mm dia PVC conduit pipe medium grade with fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces inculding taking down the old unserviceable one all as specified as directed. Note : (i) 3 Runs of 4.00 Sqmm cable and one run of PVC conduit pipe shall be measured as one unit length. (ii) The cost of making good the disturbed surfaces is deemed to be included in the quoted rate.
S & F in repairs Surface & wall mounted Energy efficient LED Tube Light Fitting, of not less than 1x20 W, 6500 K of cool white, with extruded aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm with suitable flexible hose and making good the disturbed surfaces to match with existing surface complete all as specified and as directed. Note: Light fitting shall be of PF>0.95
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type 6500K with driver holder and LED lamp including connecting up with three core flexible copper conductor cable with flexible hose of suitable size complete including taking down old unserviceable light fitting complete all as specified and as directed. Note: Light fitting shall be of PF>0.95
Supply and fix LED light fitting, 1x10w bulk head luminaries, with LED lamp, etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size, including taking down the old unserviceable fitting complete all as specified and directed. Note: Light fitting shall be of PF>0.95
Supply and fixing in repairs MCB DB, TPN, 4 Way, 415 Volts, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs flush mounted with wall including making good disturbed surfaces complete all as specified and as directed.
Taking down ceiling fan carefully of any size from its original position, to be kept in safe custody and refixing the fan in same position or at new place including cleaning complete all as specified and directed.
Supply and fix in replacement decorative type fancy wall light suitable for CFL/LED lamp upto 14 Watt (with LED lamp 9 Watt) complete all as specified and as directed. Note: Light fitting shall be of PF>0.95
Taking down KWH meter of any description, from its original position, to be kept in safe custody and refixing in the same position or at new place including cleaning complete all as specified and directed.
Taking down water heater with two nos conductor pipes and nut bolts for proper fixing of any description, from its original position, to be kept in safe custody and refixing in the same position or at new place including cleaning complete all as specified and directed.
Supply and fix MCB triple pole & neutral 63 amps, 240 volts, 10 KA, 'B' series with all incoming / outgoing connections suitable for DB in double door with proper size of aluminium lugs complete all as specified as directed . Note all MCB and MCB DB shall be of same make as approved by AGE (I).
Excavating in trenches, n exc 1.5 m wide or n exc 10 sq m on plan and n exc 1.5 m in depth for foundation etc and getting out in soft and loose soil for taking out pipe line complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in Soft/loose soil complete all as specified and as directed.
Removing excavated materials not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.
Material and Labour for laying of 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. trenches or on fixed on wall 32 mm external dia after taking down unserviceable complete all as specified and as directed.
Material and Labour for laying of 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobia l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. trenches or on fixed on wall 40 mm external dia after taking down unserviceable complete all as specified and as directed.
Supply and fixing 32 mm bore PP-R Gate valves (brass insert) as per after taking down unserviceable one complete all as specified & directed.
Supply and fixing 40 mm bore ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed after taking down unserviceable one complete all as specified & directed.
Material and Labour cutting channels, grooves or rebates n exc 15cm girth, and trimming surface complete all as specified and as directed.
Material and labour for PCC (1:4:8) type D-2 (using 40mm graded aggregate) for filling and making good of disturbed surfaces of road/hard standing etc complete all as specified and as directed
Material and labour for cutting Cast Iron/DI/GI pipes and reducing to required length in position for insertion of new tees, branches pipe etc dia upto 80mm complete all as specified and as directed.
M/S PRITAM ENTERPRISES
M/S New Saha Enterprise
SHRI CHANDAN CHANDA
M/s Amrit Gope
Pranjit kar
M/S PAUL ENTERPRISE
M/S SWAPAN DEBNATH
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .