GE/SRA/T-71/2025-26

SCHEDULE 'A' PART-I (B&R WORKS)

Excavating in post holes (or similar holes) each n exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

M&L cement concrete 1:2:4 type B2 (using 40mm graded stone aggregate) as in filling and mass concrete complete all as specified and directed.

M&L for mild steel angle posts, struts and similar primary members for chain link fencing, including cutting to length, drilling holes, notching, welding/bolting, erection in position, alignment and fixing complete, conforming to Fe-290 Gde E-165, all as specified and directed.

S&F PVC coated chain link fencing, coloured, fabricated from 3.50 mm dia galvanised steel wire (core), machine-made with mesh size 75 mm × 75 mm, fixed to already erected GI/MS posts/frames, complete all as specified and directed. NOTE: MS round bars, MS flats, nuts and bolts used for holding/fixing the mesh shall be measured and paid for separately under relevant items as ‘Supply only’. Labour element for fixing these items shall be deemed to be included in the rate quoted for this item.

Supply only mild steel round bars, 10 mm dia and over, cut to length and bent to shape as required, complete all as specified and directed

Supply only mild steel screw bolts (machine made), 12 mm dia, with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 10 cm long, complete all as specified and directed.

Supply only mild steel flat iron fillets to be used as secondary members for chain link fencing, supplied in fully fabricated condition, duly cut to length, drilled and countersunk, bent to the required shape, etc., complete all as specified and directed

M&L preparing new or previously untreated Steel and Iron Surfaces in fencing, gates etc, of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint over a Red Oxide Primer complete all as specified and directed.

M&L for brickwork with fly-ash bricks (with old size bricks), straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed

M&L for 15 mm thick plastering in cement mortar 1:4 on external surfaces of brick/stone walls or concrete surfaces finished even and fair upto 4 storey height including necessary scaffloding complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of exterior acrylic emulsion paint (anti-dust & anti-algae), tinted to approved shade, over one coat of suitable exterior primer, on new wall surfaces of any description, over 10 cm width or girth, up to 4 storey height, including necessary scaffolding and safety arrangements, complete all as specified and directed.

SCHEDULE 'A' PART-II (ELECTRIFICATION WORKS)

S&F Modular Switch 1 way 6 A, 1 module complete all as specified and as directed.

S&F track mounted LED light system to provide focussed light including necessary electric connection from ceiling junction/terminal box to track through suitable size copper wire and power feed connector, complete all as specified and directed, comprising of the following accessories :- (i) 10 Watt COB LED luminaire in Pressure Die-cast aluminium housing (heat sink) with powder coated white finish with driver, (ii) One metre long track, single phase, white colour (iii) L Shape Connector, white colour (iv) Any other accesory required for satisfactory installation of the track light.

-ditto- but concealed type sub main wiring with 2 runs of 06 sqmm phase wire and 1 run of 06 sqmm neutral wire (Three runs of single core 6.0 sqmm cable along with one run of PVC conduit shall be measured as one unit length)

S&F Metallic DB, VTPN, 4 way, vertical type, IP 43 protection, double door, 415 volts with provision for MCCB as incomer and MCB as outgoing, incl blanking plates for any vacant slots after fixing of MCBs, and connecting up complete all as specified and directed NOTE :- Incoming MCCB/RCCB/MCB and outgoing MCBs shall be measured and paid seperately.

S&F Metallic DB, TPN, IP 43 protection, double door, 415 volts, 4 way (8+12), with 100 Amps copper bus bar for each phase, incl blanking plates for any vacant slots after fixing of MCBs, complete all as specified and directed. NOTE :- Incoming MCCB/RCCB/MCB and outgoing MCBs shall be measured and paid seperately.

S&F MCCB, 4 pole, 100 Amps, 25 kA, 415 Volts, AC, 50 Hz with adjustable thermal and magnetic setting, fixed in DB complete all as specified and directed.

S&F MCB, 'B' Curve, TPN, 63 Amps, breaking capacity 10KA complete all as specified and directed.

S&F MCB, 'B' Curve, SPN, 40 Amps, breaking capacity 10KA complete all as specified and directed.

S&F MCB, 'B' Curve, single pole, 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed.

Please Enable Macros to View BoQ information