Tender for procurement of Laboratory Furniture

Amount

MAIN ITEM

1. Wall Bench (WB - 1) Size: L 2925 mm x W 900 mm x H 900 mm

'- Work top in 18 ± 1 mm thick Black Granite construction

'- 750 mm wide storage module with one drawer two shutters

'- Leg space

'-Over Head Storage cabient with vertical support along with 01 no. adjustable Shelf & Electrical Raceway in GI Const. - ( L 703 x W 375 x H 635 mm)

'- 6/16 Amp electrical sockets and 16 Amp one way switch

'- MS 30 X 30 X 1.2 mm Sq. Pipe for Granite Support

'- Back Panel in G.I. Construction

'- Filler Panel in G.I. Construction

2. Wall Bench (WB - 2) Size: L 2775 mm x W 900 mm x H 900 mm

'- Work top in 18 ± 1 mm thick Black Granite construction

'- 750 mm wide storage module with one drawer two shutters

'- 750 mm wide storage module with two shutters

'- 500 mm wide storage module with one drawer one shutter

'- Single piece molded PP sink (L 600 x W 450 x D 315)

'- Worktop mounted three way water tap with swan neck spout

'- Peg Board in Phenolic resin construction with 20 Nos. PP Pegs

'- Worktop mounted electrical raceway in GI powder coated construction

'- 6/16 Amp electrical sockets and 16 Amp one way switch

'- MS 30 X 30 X 1.2 mm Sq. Pipe for Granite Support

'- Filler Panel in G.I. Construction

3. Wall Mounted Storage Cabinet Size: L 750 mm x W 350 mm x H 600 mm '- Wall mounted cabinets in G.I. construction with epoxy powder coated one no. adjustable self with double skin Glass doors and Locks

4. Const. Bypass type Bench Fume Hood (Size: L 1800 x D 915 x H 2300 mm) (For Non - AC Labs) Consisting of following : (As specified in Annexure - X of the tender document) Fume Hood Superstructure Fume Hood Worktop Service Valves Electrical Fittings Fume Hood Understructure Fume Hood Under-Cabinet (Chemical Storage Purpose) Accessories

5. Exhaust Fan (315 mm Dia) - One fan for 1 Nos. 1800 mm wide Fume Hood - Single piece molded UV treated chemical resistant SISW direct driven centrifugal fan in PP construction with suitable stand in MS powder coated construction, CFM 750 to 800 - Corrosive resistant PP Impeller with extra strength, high efficiency, properties which produces lower noise and power consumption. - Drive - 1.5 HP, 2800 RPM, 415V, 50Hz., TEFC Class B insulation induction motor with IP55 enclosure, in Non-FLP Const. -16A, 3Ph MCB for Fan - Legrand or eq. Make -DOL Starter for Motor.

6. 2Way Eye wash (Accessories) -Eyewash ,ade from highly Brass forging const.

7. Supply & Installation of exhaust ducting in PP/FRP (Round Shape) construction (3mm + 2mm) complete with necessary bends, reducers, T-connections, supports, flanges, gaskets, nutbolts etc. Note: Amount for ducting work shall be payable as per actual measurement