SPL REPAIRS TO INTERNAL ROAD (TARMAC) FROM R AND D VEH WAITING AREA TO FOL GP AND MP GP AREA AT 359 COY ASC (SUP) TYPE G AT CHANDIMANDIR MIL STN

Amount

Preparation of black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specifed and directed.

M&L for applying evenly a priming/tack coat with bituminous primer paving bituminous (VG-10) at the rate 5 kg per 10 Sqm with mechanical sprayer complete all as specified and as directed.

M&L Bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder (VG-30) contents by weight of total mix, mixed in hot mix plant and laid with mechanical paver, rolled and compacted with power rollers to required camber and gradient complete all as specified and directed.

M&L for Premix bituminous, macadam using 4% binder content using paving bitumen (VG-30) by wt of total mix using hot mix plant and laid with mechanical paver, rolled and compacted to required gradient and camber using vibromax power roller of capacity 8 to 12 Tonne complete all as specified and directed (consolidated thickness not exceeding 75 mm) complete all as specified and directed.

Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by applying tack coat at 5 kg per 10 sq m. putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again will rammed (including supply or premixed macadam, binder and chippings), depth of potholes n exc 30mm

M&L for 2 mm thick, white/yellow hot thermoplastic road marking paint, confirming to BS standard 3262 with 20% glass beads (intermixed) spread and laid by automatic mechanical machine engine driven machine, painting as in strips (continuous or breaking) complete all as specified and directed.

Demolition of Bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer), laid dry, complete all as specified.

M&L PCC 1:4:8 type D2 (using 40mm grded stone aggregate) as in sub base, foundation filling and mass concrete complete all as specified.

M&L for PCC 1:2:4 type B-0 (using 12.5 mm grded stone aggregate) as in copings, apex stones, bed plates, kerbs etc including weathering, slightly rounded or chamfered angles and throating complete all as specified.

M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and no pigment conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, laid over and including 25mm thick layer of dry river sand cushioning, complete all as specified and directed

M/s DATAAR BUILDERS

JAY TEE KAY INFRA

BAL SINGH AND SONS