Naganadhi GVMCH at adukkamparai

Amount

Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specifications.

Plain Cement Concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.

Brick work usingII Class Ground Moulded chamber Burnt Bricks of size 9" x 43/8" x 23/4" in Cement Mortar 1:5(one cement and five of sand) including neat finishing,curing etc, complete complying with standard specifications.

For Foundation and basement.

Plastering with Cement Mortar 1:5 (One cement and Five M-Sand), 12 mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing 20 HP / 3 phase, 10 stage open well submergible pump of approved make and quality with ISI mark with necessary accessories and fixed with delivery pipe erected in the bore well with necessary clamp etc., with following additional accessories 1 No of 3 phase star delta starter of 63 AMPS of approved uality and make with ISI mark

Supplying, Fixing and connecting of 4 core 16 sq.mm. PVC Armoured UG Cable wire for the sub-mergible motor from pannel board to sub-mergible pump.

Supplying of best and approved quality of Nylon Rope for Borewell including laying in the bore well any tying with copper wire it etc Complete complying with standard specifications.

Supplying and fixing, Panel board of approved make and quality with ISI mark with necessary accssories and fixed with delivery pipe errected in the borewell with necessary clamp etc., with following additional accessories.

Supplying, laying of size 200mm dia D.I. Pipes (Ductile iron socket pipes) of approved quality and best variety of class K9 as per 188329/2000 as direted by departmental officers etc commplete complying with standard specification.

Jointing the size 200mm dia C.I/ D.I - S/S pipes and specials with molten lead and Yarn including caulking the joints. (Including cost of jointing materials) as direted by departmental officers etc commplete complying with standard specifications.

12.8 DI SINGLE CHAMBER AIR RELEASE VALVE Supply and delivery of DI D/F Gate sluice valves (soft seated) resilient seated soft sealing Gate Valves(Sluice Valves) with body Bonnet of Ductile cast iron of Grade GGG 40 orequivalent grade, Wedge fully rubber lined with EPDM replaceable spindle nut without gland packing and with 3 O- Ring protection on the shaft and seals of NBR and the valves should be of Vacuum tight and 100% leak proof with face to face dimensions as per BS 5163-89/ISI 14846-2000/DIN 3202 F4. All the valves should be with electrostatic powder coating both inside and out side with pocket less straight through body passage. All the valves are to be compatible for buried application with pressure rating PN 10/16 and with 5years warranty The above rates are basic rates inclusive of transportation charges anywhere in Tamilnadu.

Supplying and Fixing the size 200mm dia D.I Coller for fixing same position (Including cost of jointing materials) as direted by departmental officers etc commplete complying with standard specifications.

Supplying and Fixing the size 200mm dia x22.50 degere D.I bend for fixing same position (Including cost of jointing materials) as direted by departmental officers etc commplete complying with standard specifications.

Rewinding charges of Exg 20 HP Motar with pump set for reneval of motar push 4nos, bearing set, pump push and Labour charges and transportion charges etc complete as fixing same position (Including cost of jointing materials) as direted by departmental officers etc commplete complying with standard specifications.

Rewinding charges of Exg 20 HP Motar with pump set for reneval of motar push 4nos, bearing set, pump push and Labour charges and transportion charges etc complete as fixing same position (Including cost of jointing materials) as direted by departmental officers etc commplete complying with standard specifications.

A SURESHKUMAR