REPAIRS TO CHARPOY GI PIPE BED PLY TOP AND SOFA SETS AT BABINA CANTT

Amount

BED HARD/BED PLY TOP (1980mmx900mmx660mm (FD-246/ 247 ) : Plywood :- S&F12mm thick plywood MR Grade, approved quality in single piece as per drawing without any joint to the bed frame with suitable screws wood/steel with cup washer including removal of damaged ply wood all as specified on drawing or as directed by Engineer-in-charge.

BED HARD/BED PLY TOP (1980mmx900mmx660mm (FD-246/ 247 ) : Long Rail :- S&F in repairs 1st class hard wood long rail 35mm x 90mm in section as per existing size of Bed including removal of damaged long rail all as specified on drawing or as directed by Engineer-in-charge.(Each long rail will be measured as single unit)

BED HARD/BED PLY TOP (1980mmx900mmx660mm (FD-246/ 247 ) : Short Rail : - Description all as per item No. 2, but short rail all as specified on drawing or as directed by Engineer-in-charge. (Each short rail will be measured as single unit)

BED HARD/BED PLY TOP (1980mmx900mmx660mm (FD-246/ 247 ) : Head rest :- S&F in reapirs to head rest consisting of 60 x 30 x 260mm vertical size and 30 x 60 x 400mm horizontal including legs of size 60 x 60mm in section at top and length 400mm from bottom of leg and 30 x 30mm in section at bottom complete including removal of damaged head board all as specified on drawing or as directed by Engineer-in-charge.

BED HARD/BED PLY TOP (1980mmx900mmx660mm (FD-246/ 247 ) : Foot rest : - Description all as per item No. 4, but foot rest consisting of 22 x 75mm in section 1st class teak wood battens 3 Nos at equal space, joining top and bottom horizontal rails of foot board. The top and bottom horizontal rails of size 30 x 60mm shall be 1st class hard wood. The vertical legs above horizontal rails shall be 30 x 60mm all as specified on drawing or as directed by Engineer-in-charge.

BED HARD/BED PLY TOP (1980mmx900mmx660mm (FD-246/ 247 ) : Stiffener : - S&F in reapirs to new 1st class teak wood stiffeners of size 40 x 60mm complete including removal of damaged stiffiners all as specified on drawing or as directed by Engineer-in-charge.

BED HARD/BED PLY TOP (1980mmx900mmx660mm (FD-246/ 247 ) : Plywood one side teak face for Head rest : S&F in reapirs 4mm thick one side teak face of size 780 x 340mm outer and inner side including 12mm dia half cut teak wood beading on three side of head rest including removal of damaged ply all as specified on drawing or as directed by Engineer-in-charge.

BED HARD/BED PLY TOP (1980mmx900mmx660mm (FD-246/ 247 ) :Plywood one side teak face for Foot rest :- S&F in reapirs 4mm thick one side teak face plywood of size 780 x 180mm outer and inner side including 12mm dia half cut teak wood beading on three side of foot rest including removal of damaged ply all as specified on drawing or as directed by Engineer-in-charge.

BED HARD/BED PLY TOP (1980mmx900mmx660mm (FD-246/ 247 ) :Flat iron: S&F Flat iron size 150x35x5mm made to shape as per drg to be fixed with 6 nos of screw wood steel 35mm long ISI marked duly painted with paint synthetic enamel black over a coat of primer of each corners of Bed Hard/ Bed plywood top all as specified on drawing or as directed by Engineer-in-charge.

BED HARD/BED PLY TOP (1980mmx900mmx660mm (FD-246/ 247 ) : Polishing :- Material and labour for preparation of old existing polished surfaces, new replaced parts of Bed hard/ Bed plywood top by scrapping and rubbing down by emery paper including removing oily spots, ink dots , filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge. The tint of polish shall be exactly same as of existing polish colour of furniture or as approved by Engr-in-charge.

CHARPOY GI PIPE (FD-220) : Nylon Newar :- M&L removing unserviceable nylone newar from charpoy GI Pipe and retaping with approved Nylone newar shall be 50 to 55mm wide white/light colour 1st quality not made out from recycled nylon and weight of nylon newar shall be 1.5 Kgs of each charpoy. Weaving shall be done both sides by over lapping alternate bands to over the rails all round nos of bands shall be 32 to 34 (vertical) and 13 to 14 in horizontal, tightning complete charpoy ie loose checknuts ,elbows,Long Rails and short Rails complete all as specified and shown on drg.

CHARPOY GI PIPE (FD-220) : Long Rail :- M&L Removing old unserviceable long rail from GI pipe Charpoy and supply and fixing new long rail of size 1884mm long made out of 32 mm bore medium grade GI Pipe duly threaded one side upto 22mm long at end and other side to 52mm long and re-assembling of GI charpoys after replacement of UNSV long rail complete all as specified and as directed by Engineer-in-charge. Note ;- 1. The items includes threading both sides in new long rail also. 2. Old unserviceable long rail obtained shall be reused in Item No 13 below.

CHARPOY GI PIPE (FD-220) :Short Rail :- M&L for removing old unserviceable short rail from GI Charpoy and converting long rail into short rail and fixing new short rails of size 804mm long retreved vide items No 12 here-in before duly thereded 22mm long on both ends fixing to charpoy complete all as specified and directed.

CHARPOY GI PIPE (FD-220) :Legs :- M& L Converting short rail into leg (Obtain from Sl No 13 here-in-before and fixed complete to Charpoy GI pipe duly threaded 22mm long of the Leg and including 3mm thick MS sheet( cut to shape of the bottom) in bottom as shown on Drg by welding complete all as specified and directed by Engr In Charge

CHARPOY GI PIPE (FD-220) : Elbow :- M&L for Removing old unserviceable three way elbow and supply and fixing new elbow 32 mm bore,ISI marked (wt not less than 420 gms each) & re-assembling of GI charpoys after replacement of broken elbow to charpoy GI Pipe , complete all as specified and as directed by Engineer-in-charge.

CHARPOY GI PIPE (FD-220) : Check Nut : - M&L for Removing old unserviceable check nuts and supply and fixing new check nuts 32 mm bore to GI Charpoy, all as specified and as directed by Engineer-in-charge.

CHARPOY GI PIPE (FD-220) : MS sheet : M & L for replacement of 3mm thick MS sheet by welding to bottom of GI legs as directed by Engr-in-Charge.

CHARPOY GI PIPE (FD-220) : MS Clamp: M & L for replacement of broken MS clamps FI 25mmx3mm cut to shape & welded with legs duly painted in black paint match upto the existing as per shown on drg.

SOFA SET 4/ 5 PERSON WITH CUSHION (FD- 258,281& FD-373) :Foam Cushion :- Supply only foam cushion size 558mm x 533mm x 100mm , 40 density duly covered all over with tapestry cloth superior quality not less than Rs. 350.00 per mtr as approved.A suitable chain with hook and runner of approved quality to one side of cushion shall be provided of required length as directed. Make- Sleepwell/Kurlon/ Note :- (i) Each cushion for seat or back will be measured as single unit.

SOFA SET 4/ 5 PERSON WITH CUSHION (FD-281, 373 ) : Front Leg :- M&L for Removing the existing unserviceable front leg from Sofa and providing new first class teak wood of leg size 70mm x 35 mm x 300mm, rest all as shown on drg and as directed by Engr-in-Charge.

SOFA SET 4/ 5 PERSON WITH CUSHION (FD-281, 373 ) : Rear Leg :- M&L for Removing the existing unserviceable rear leg from Sofa and providing new first class teak wood of leg size 70mm x 35 mm x 300mm, rest all as shown on drg and as directed by Engr-in-Charge.

SOFA SET 4/ 5 PERSON WITH CUSHION (FD-281, 373 ) : Arm Rest : - M&L for Removing existing unserviceable Arm rest from Sofa and providing new first class teak wood Arm Rest of size 35mm x 70mm x 725mm, rest all as shown on drg and as directed by Engr-in-Charge.

SOFA SET 4/ 5 PERSON WITH CUSHION (FD-281, 373 ) : - Side Rail :- M&L for Removing existing unserviceable side rail from Sofa and providing new first class teak wood side rail of size 35 mm x 100mm x 725mm, rest all as shown on drg and as directed by Engr-in-Charge.

SOFA SET 4/ 5 PERSON WITH CUSHION (FD-281, 373 ) : Bearers : - M&L for Removing existing unserviceable bearer from Sofa and providing new first class teak wood bearer of size 40mm x 40mm x 725mm, rest all as shown on drg and as directed by Engr-in-Charge.

SOFA SET 4/ 5 PERSON WITH CUSHION (FD-281, 373 ) : Battens :- M&L for Removing existing unserviceable battens from Sofa and providing new first class teak wood battens of size 50mm x 20 mm, rest all as shown on drg and as directed by Engr-in-Charge.

SOFA SET 4/ 5 PERSON WITH CUSHION (FD-281, 373 ) : Front Rail of 3 Seater : - M&L for Removing existing unserviceable front rail from Sofa three seater and providing new first class teak wood front rail of size 35mmx 100mm x 1590 mm, rest all as shown on drg and as directed by Engr-in-Charge.

SOFA SET 4/ 5 PERSON WITH CUSHION (FD-281, 373 ) : Front Rail of Single Seater :- M&L for Removing existing unserviceable front rail from Sofa single seater and providing new first class teak wood front rail of size 35mm x 10mm x 530 mm, rest all as shown on drg and as directed by Engr-in-Charge.

Sofa set 5 Seater ( FD-258) : Arms Rest :- Supply and fixing arms made out of well seasoned teak wood free from cracks and knots, sapwood and other blemishes duly finished after removing the old /broken one as per drg and as directed by Engr-in-charge.

Sofa set 5 Seater ( FD-258) : Plywood for seat : Supply and fixing plywood commercial 12 mm thick MR grade as approved in one piece after taking down the old /broken one and providing new ply suitable for seat of sofa set 3 seater.Rest all as specified in drg and as directed by Engr-in-charge.

Sofa set 5 Seater ( FD-258) : Back rail of 3 seater : Description all as per ser item No-28 above but back rail of 3 seater.

Sofa set 5 Seater ( FD-258) : Back rail of single seater: Description all as per ser item No-28 above but back rail of single seater.

Sofa set 5 Seater ( FD-258) : Front rail of 3 seater : Description all as per ser item No-28 above but front rail of 3 seater.

Sofa set 5 Seater ( FD-258) : Front rail of single seater : Description all as per ser item No-28 above but front rail of single seater .

Sofa set 5 Seater ( FD-258) : Cushion for back : Supply and fixing foam cushion to back of sofa set of size 530x520x100mm , 40 density make- Sleepwell/ Kurlon duly covered all over with tapestry cloth superior quality not less than Rs. 300.00 per mtr as approved over base of plywood commercial 9 mm thick in one piece shall be fixed to the back of the sofa set after removing the old one and as directed by Engr-in-charge and as per drg.

SOFA SET 5 PERSON WITH CUSHION (FD-281, 373, 258) : Polishing :- Description all as per ser item No-10 above but sofa set 5 person.

SOFA SET 4 PERSON WITH CUSHION (FD-281, 373, 258) : Polishing :- Description all as per ser item No-10 above but Sofa set 4 person .

CHAIR EASY STEEL (FD-121(M) : M&L for repairs to chair easy steel by removing all old paint by scrapping down and carrying out repairs such as removing dents, necessary welding wherever required and providing new hard rubber shoes and applying two coat of Olive Green synthetic enamel paint over a coat of primer after preparation of steel surfaces complete all as specified, directed and shown on drgs.

CHAIR EASY STEEL (FD-121(M) : Seat :- M&L for replacement of seat cushion made out of 32 density foam, 50 mm thickness, fixed over 12 mm thick commercial plywood and upholstered with leatherite for seat of size 560mm x 635 mm.Shape and size all as specified on drg or directed by Engr-in-Charge.

CHAIR EASY STEEL (FD-121(M) : Back :- M&L for replacement of back cushion made out of 32 density foam, 25 mm thickness, fixed over 12 mm thick commercial plywood and upholstered with leatherite for back of size 560mm x 355 mm.Shape and size all as specified on drg or directed by Engr-in-Charge.

CHAIR EASY STEEL (FD-121(M) : Arms Rest : - M&L for replacement of teak wood arm rest 19mm x 65 mm in section as shown on drg, duly french polished with high gloss finish.

ROHIT ENTERPRISES

M/S AADI TRADERS