8492 REPAIRS REPLACEMENT OF SEWAGE LINES MANHOLES AND DAY TO DAY COMPLAINTS OF WARDS AND ANCILLARIES UNDER AGE BR III OF GE SOUTH PUNE

Amount

S&F in repairs PVC waste pipe 32/40mm dia 610mm long suitable for WHB or Sinks etc complete all as specified and directed.

Dismantling and breaking up RCC / SWG drain pipes, set in cement mortar of following sizes and removing debris from site complete all as directed by Engr-in-Charge :- (a) 150 mm bore

(b) 200 mm bore

(c.) 250mm dia

(c.) 300mm dia

Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundations, manholes etc and getting out in in soft / loose soil, complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundations, manholes etc and getting out in in hard / dense soil, complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundations, manholes etc and getting out in in soft / disintegrated rock, complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and exc 1.5m but n. exc. 3.0m in depth for foundations, manholes etc and getting out in in hard / dense soil, complete all as specified and directed.

M&L for 150mm bore reinforced concrete pipes, class NP2, laid and jointed complete with rubber ring joints, complete all as specified and directed.

M&L for 200mm bore reinforced concrete pipes, class NP2, laid and jointed complete with rubber ring joints, complete all as specified and directed.

M&L for 250mm bore reinforced concrete pipes, class NP2, laid and jointed complete with rubber ring joints, complete all as specified and directed.

M&L for 300mm bore reinforced concrete pipes, class NP2, laid and jointed complete with rubber ring joints, complete all as specified and directed. Note for item nos. 10 to 13 :- Laying of sewage line work is to carried out in running sewage water therefore, temporary diversion /plugged of existing sewage line & bailing out of sewage water is the responsibility of contractor and the cost for the same provisions are to be deemed to be included in unit quoted rates.

M&L for concrete bed 1:4:8 type D-2, using 40mm graded stone aggregate as in drain pipes including forming cradles, suitable for 150mm bore of pipe, complete all as specified and directed.

M&L for concrete bed 1:4:8 type D-2, using 40mm graded stone aggregate as in drain pipes including forming cradles, suitable for 200mm bore of pipe, complete all as specified and directed.

M&L for concrete bed 1:4:8 type D-2, using 40mm graded stone aggregate as in drain pipes including forming cradles, suitable for 250mm bore of pipe, complete all as specified and directed.

M&L for concrete bed 1:4:8 type D-2, using 40mm graded stone aggregate as in drain pipes including forming cradles, suitable for 300mm bore of pipe, complete all as specified and directed.

Returning, filling in any type of soil, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick, complete all as specified and directed.

Removing excavated materials (Soil) n. exc. 50m and depositing where directed at a level n. exc. 1.50m above the starting point, complete all as specified.

Dismantling stone slab / tiles of any description or thickness, laid, bedded & pointed in cement mortor in floors, hard standing, apron etc

M&L for 75mm dia, cast iron nahani trap with stainlss steel grating including jointing to waste pipe, fixed to cement concrete type B1 1:2:4, complete all as specified and directed.

Cleaning of manholes of any size and of any depth by taking out semi solid / solid sludge from manholes completely and dispossed off the same in covered vehicle out side the MOD land complete all as directed by Engr-in-charge.

M&L for cleaning of blockage of sewer lines of any type & any dia of sewer line (ie branch sewer line or main sewer line) by way of cleaning desludging foreign material as well as rodding of sewer line between succession manholes manually /mechanically or by pumping out sewage from blocked manhole including de-sludging where required and ordered by Engineer-in-Charge and keeping sewer line functional entering from floor trap, water closet, soil waste / vent pipe, gully trap up to final drop / outlet into septic tank, soakage well complete all as specified and directed by Engineer-in-charge.

Cleaning of sewage system on day to day basis including blocked WCs, blocked WHB outlet , bottle traps, nahani traps, floor traps, gully traps, soil/waste pipe running on external walls of building including junctions in running / flowing condition without any disturbance and removing all types of blockages of any description in any situation manually or mechanically and disposal off of the sludge / waste materials outside the Defence land by deploying 02 (TWO) safaiwala per day (All working days) complete all as specified and directed by Engineer-in-charge. Note :- (i) Complaint handed over till 1700 hrs shall be completed on same day. (ii) If safaiwala not attended the complaint within the time frame as mentioned above, 50% of quoted rate shall be deducted from the contractor’s dues as a penalty. (iii) The contractor shall be responsible to maintain daily job completed by safaiwala deputed by him in the subject work and obtain the signature of I/C complaint cell / Engr-in-charge daily at 1700 hours on all working days. (iv) Attending of one complaint and make it functional shall be measured as one Job.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for the following dia of pipe, complete all as specified and directed:- (a) 150mm bore

(b) 200 mm Bore

(c) 250 mm bore

(d) 300 mm bore

M&L for precast coloured, chequered cement concrete tiles, glossy finish of size 305 x 305mm x 25mm thick, conforming to IS-1237 (2006) set jointed and pointed in neat cement slurry as in floor laid over and including 20mm thick screed bed in CM (1:6), complete all as specified and directed

M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate, 25mm average thickness leveling course / padding, finish the surface even concrete complete all as specified and directed.

M&L for matt finished coloured ceramic tiles 400x400x 7 to 8mm thick size joint free of approved colour, set jointed in cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 20mm thick screed bed in CM 1:4 etc complete as in flooring all as specified and directed.

M & L for 300x600mmx5.5 to 6mm thick coloured glazed ceramic tiles in dado/skirting , laid and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 10 mm thick CM (1:3) backing coat including triangular filleting on top edge in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10cm and n exc 20cm girth, complete all as specified and directed

S&F Hand Shower( Health faucet) with 8mm dia, 1.2mtr flexible tube and wall hook with N.R.V. (back flow prevented) complete all as specified & directed.

S&F in repair Grating doom 100 mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed

S&F in repair Grating doom with waste hole 125 mm dia of PTMT (Minimum weight 40gms) complete all as specified and directed

Dismantling & breaking of drain pipes of 75mm to 110 mm dia of AC/ PVC, set in cement mortar or adhensive, complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid under floors / in earth, complete all as specified and directed. Note for item nos.38 to 42:- Quoted rates shall be deemed to be inclusive of the cost of necessary scaffolding & security measures as the work is to be carried out for elevated height upto 12 mtr height building.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid under floors / in earth, complete all as specified and directed.

S&F 150 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid under floors / in earth, complete all as specified and directed.

Fixing only 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid under floors / in earth, complete all as specified and directed.

Fixing only 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid under floors / in earth, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends, any radius, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends, any radius, complete all as specified and directed.

S&F PVC (SWR) bends with oval access door of 110 mm bore, complete all as specified and directed.

S&F PVC (SWR) bends with oval access door of 75 mm bore, complete all as specified and directed.

S&F PVC SWR Branch piece single (Single Y) equal or unequal 110mm dia with door access, complete all as specified and directed.

S&F PVC SWR Branch piece single (Single Y) equal or unequal 75 mm dia with door access, complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm bore, complete all as specified & directed.

S&F PVC (SWR) vent cowl 110mm bore, complete all as specified & directed.

M&L for precast factory made manhole cover of medium duty, area of each cover n.exc 0.75 Sqm, 75mm thick with SFRC concreting including groove and hook arrangement for lifting and placing in position and sides covered by MS sheet with necessary collars, complete all as specified and directed by Engr-in-charge.

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base / flooring, well compacted, finish surfaces even, complete all as specified and as directed.

M&L for coloured precast cement concrete interlocking tiles 60mm thick, M-35 grade of any shape and size, conforming to IS-15658-2006 glossy finish as in floor / pavement laid on 50mm thick stone dust cushioning, laid dry to the profile over hard concrete sub base filling complete all as specified and directed by Engr-in-Charge

M&L for granite 18mm thick (of any type), work (table rubbed and polished) as in steps, pillar, wall window cill, shelf, cooking platform and like laid over and including 10mm thick rendering in cement mortar (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.

M&L for Granite 20mm thick (of any type) work (table rubbed and polished) as in wall lining (veneering to wall) with and including 12mm thick backing coat in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including triangular filleting on top edge in CM 1:3, complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, shelf cooking platform, and other similar situations, complete all as specifed and directed.

S & F machine cut cuddappa stone slab one side polished 40 to 50 mm thick as in shelf set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15mm screed bed in cement mortar (1:4) complete all as specifed and directed.

S&F in repair basin mixer suitable for hot and cold water without popup waste with 450mm long Braided Hoses complete all as specified and directed. Make : Jaquar Product code ARI-CHR-39001B or equivalent cat aprt / model in Kohler / Hindware as approved.

S & F in repairs, vitreous china wash down water closet pan "Pedestal" coloured including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinge devices with and including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc complete all as specified and direcrted.

S&F in repairs vitreous china, squatting pan, 'Orissa' pattern, size 580 x 440mm white, with integral foot rest, including concrete bedding and PVC flushing cistern 10 Ltr capacity including all internal fitting, inlet, outlet pipe connections and 32mm thick PVC Flush pipe for low level cistern etc. complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L PCC (1:4:8) type D-2 as in foundations, filling in mass concrete etc. complete all as specified and directed

M&L for PCC 1:2:4 type B-1, (using 20mm graded stone aggregate) as in surface channels and drains, coping, bed blocks and benching of manholes incl all moulds and forms all as specified and directed.

Extra for forming fair finished drain or channels 30 cm inner girth in cement, concrete using extra cement including forms, moulds, mitred/stopped ends in manholes (inner girth only measured) complete all as specified and directed

S & F vitreous china wash hand basin, white flat back of size 550x400mm including PVC waste coupling 32mm, CP fancy type, angle cock 15mm bore, and PVC waste pipe, PVC connection 45cm long including CI brackets / fixing with fasteners etc complete in repairs complete all as specified and directed by Engr-in-Charge.

Taking up or down GI water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed for following size of pipe :- (a). 15mm dia bore.

(b). 20mm dia bore.

Supplying, fixing, jointing and testing galvanised iron tubing, concealed, medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall, ceiling or laid in floor complete all as specified and as directed for the following sizes:- (a) 15 mm dia bore

(b). 20mm dia bore.

S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.20 metre long flexible tube and ABS wall hook with NRV including making connections and fixed in position complete in all respect as specified.

Cleaning & clearing of underground sewage line of any dia (including manholes by taking off manholes covers and re-fixing the same after cleaning) of any description, underground any depth by removing any type of blockage including de-silting and de-chocking with combined high pressure water jetting cum suction (vacuum) type machine mounted on LCV/HCV and having facilities of high pressure water thermoplastic fiber brailed water jetting hose and through conical / round shape nozzler pipe and flushing after cleaning including clearing of manholes (Sludge / sludge water shall be disposed off at authorised dumping site declared by local administration outside MD land complete all as directed by Engineer-in-Charge Note :- (i). Contractor shall bring the high pressure water jetting cum suntion type machine mounted on LCV/HCV with in 48 Hrs after requirement has been notified by the Engr-in-Charge in site order book. (ii). Cleaning of two manholes and clear blockage in between two manholes shall be measured as one job.

M&L PCC (1:2:4) type B-1 using 20 mm stone graded aggregate as in coping, kerbs, bed blocks etc including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed

M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate) of 75mm thick, laid in alternate bays as in path and plinth protection including finishing the surfaces even and smooth using extra cement. complete all as specified and directed

Demolition of reinforced cement concrete of any description & in any position (slab) complete all as specified and directed.

M&L for providing precast RCC (1:2:4) type B1 using 20 mm graded stone aggregate for Manholes covers set in CM 1:4 complete all as specified and directed

S&F MS TMT bars upto 10mm dia cut to length, bent to shape required including cranking, bending , binding, hooking ends abd binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. complete all as specified and directed

Demolition of brick / PCC block / stone masonry, built in cement mortar complete all as specified and directed.

M&L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:3:6) 20mm grade aggregate and setting in CM 1:6 complete all as specified and as directed

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete or stone wall surfaces with WPC @ 3 % by weight of cement including taking down existing plaster and including preparation of new plastered surfaces and applying two coats of cement base paint complete all as specified and as directed by Engr-in-Charge. (Note :- WPC shall be measured and paid separately)

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces with WPC @ 3 % by weight of cement,complete all as specified and as directed by Engr-in-Charge. (Note :- WPC shall be measured and paid separately)

Supply only integral water proofing compound, complete all as specified and as directed

S&F in repair CI Hubless pipe of dia 150 mm fixed to walls with necessary fittings and clamps, complete all as specified and as directed.

S&F in repairs CI hubless dia reducer tee (single branch plain Tee) 150x150x100mm complete all as specified and as directed.

S&F in repairs only SS shielded coupling 150mm bore complete all as specified and as directed.

S&F in repairs CI hubless bend 150 mm bore complete all as specified and as directed.

S&F in repair CI Hubless pipe of dia 100 mm bore fixed to walls with necessary fittings and clamps complete all as specified and as directed.

S&F in repairs hubless dia reducer tee (single branch plain T) 100x10x100mm complete all as specified and as directed.

S&F in repairs SS shielded coupling 100mm bore complete all as specified and as directed.

S&F in repairs CI hubless bend 100 mm bore complete all as specified and as directed.

S&F in repairs CI hubless 150x100 mm bore Dimminshing pieces (Reducer) complete all as specified and as directed.

M & L for preparation of old painted surface and apply one coats of Floor paint with ready mixed paint for use on floor complete all as specified & directed by Engineer-in-Charge.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in cement concrete and making good disturbed ground. complete all as specified and directed

Dismantling of fencing wiremesh, any type, complete all as specified and as directed.

Supply only chain link MS galvanised fencing any size or type complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete.

Supply & Fixing MS work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Dismantling of wrought or MS work of any description etc complete all as specified and as directed.

Supply & Fixing MS Framed work as in doors or gates or drain covers of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 410-W (Gde- E- 250) quality-A complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed

Removing of caked mud/ black soil/ STP waste materials out of MD land to a place earmarked by civil authorities including loading, unloading and stacking at the destination, complete all as specified and as directed by Engr-in-charge. Note:- The contractor shall be responsible to liase with civil authorities for permission of disposal and should maintain necessary safety precaution during loading and unloading at his own cost. Please note nothing extra amount will be admissible on this account.

MONA ASSOCIATES

TULSAYA CONSTRUCTION

L.K.R.TIWARI CONSTRUCTION

GS Associates