AIC/AED/NIeT-375(3rd Call)/25-26/Gr_1

Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore. (c) For depth upto 150 metre for 40 mm dia. tube well with top enlargement of 80 mm dia. (i) 40 mm dia. boring etc.

f) For depth more than 150 metre for 50 mm dia. tube well with top enlargement of 100 mm dia. (ii) 100 mm dia. boring etc. top enlargement

(b) For depth more than 150 metre i) 40 mm dia boring etc. beyond 150 metre

Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239(Part - I). (A) PVC Pipes (Dia) PVC Pipes (i) 40 mm dia.

(ii) 100 mm dia

(O) Solvent Cement 250 Gm. (@Rs.130.00/250grma. i.e; Rs.520/kg)

Supplying high density polythene strainer of approved make with adapter conforming to I.S. specifications. (i) 40 mm dia.

Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets. (i) 40 mm dia.

Supplying, fitting and fixing plug of approved make conforming to I.S. specifications. (i) 40 mm dia.

Supplying, fitting and fixing heavy type bell mouth reducing socket. (i) 40 mm X 100 mm

Supplying, fitting and fixing G.I. cap at top (i) 100 mm

Supplying, fitting and fixing 300 mm M.S. housing clamp of approved quality

Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required.

Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239(Part - I). (A) PVC Pipes (Dia) 32 mm dia

Supply and delivery of 1ph. 440V, 1.0HP submersible pump motor set Make KSB (Model no. 3" CORA 75/40A/18 + UMAI (S) 75) having deivery outlet 32mm complete in all respect including taxes and duties as per specification and direction of EIC.

Lowering, Installation and Commisioning of submersible pump motor set to the existing bore well after taking delivery of the pump as directed with necessary electrical works, fittings etc. Excluding the cost of pump, cable and starter but including cost of carriage, labour, tools and plants, taxes as applicable as per satisfaction and direction of EIC. i) 1 ph. 440V, 1.0 HP submersible motor set

Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction.

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD - 1785 and threaded to match withGI Pipes as per IS : 1239 (Part - I). with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,reducing socket, reducing tee, short piece etc. fitted with holder batsclamps, including cutting pipes, making threads,fitting, fixing etc.complete in all respect including cost of all necessary fittings asrequired,jointing materials and two coats of painting with approved paintin any position above ground. (Payment will be made on the centre linemeasurements of total pipe line including all specials. No separatepayment will be made for accesories, specials. Payment for painting willbe made seperately) (a) For Exposed Work PVC Pipes 25 mm

Supplying, fitting and fixing bib cock or stop cock (e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (b) 1000 litre capacity

Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm(depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides,bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick(1:4) cement plaster to insidewalls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. i) With Pakur variety (Other than SAIL/TATA/RINL).

Supplying and delivery and fixing of 2.5 sq. mm.3core flat PVC cable (Finolex or equivalent) for submersible pump motor set.

Supplying and fixing Changeover switch with Sheet Steel enclosure on flat iron frame on wall with nuts bolts etc 240V DP , 32A ( ) Make - HPL / Havells

Supply fitting and fixing one number of Purifier, 50LPH, RO systemlife line (Cylone-II) and one number FSS Voltas water cooler, 20/20

Supplying, delivery & Installation of starter DOL star (L &T Make) with appropriate relay range.

FULLY AUTOMATIC S GUARD | Fully Automatic Water Level Controller with 100 ft Cable ,Magnetic Float Switch|Design for Submersible Pumps | OHM STARTUP

CONSTRUCTION OF WATER PURIFIER STORE Earth work in excavation of foundation trenches or drain in all sorts (including mixed soil but excluding laterite or sandstone) including removing spreading or stacking the spoils within a lead of 75m as directed. The item includes necessary trimming the sides of trenches, levelling and ramming the bottom bailing out water as required complete. a) Depth of excavation not exceeding 1.5m.

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150mm. Including watering and ramming etc. layer by layer complete. ( payment to be made on the basis of measurement of finished quantity of work) a) with earth obtained from excavation of foundation

Filling in foundation or plinth by silver sand in layer not exceeding 150mm as directed and consolidating same by through saturation with water ramming complete including the cost of supply of sand (Paymend to be made on measurement of finished quantity) (B) Do-by fine sand

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as perrelevant IS codes. a) Pakur Variety

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. A) Pakur Variety

Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, bems, columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). (f) 25 mm to 30 mm shuttering without staging in foundation

a) 25mm to 30mm thick wooden shuttering as per decision and direction of Engineer-in-charge.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders, etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending top correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. (a) For works in foundation, basement and upto roof of ground floor / upto 4m. i) Tor steel/mild steel

Brick work with 1st class bricks in cement mortar (1:6) a) in foundation and plinth

125 mm thick brick work with 1st class bricks in cement morter (1:4) in ground floor.

Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.

Plaster (to wall, floor, ceiling, etc) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course, scaffolding/staging where necessary (ground floor).[excluding cost of chipping over concrete surface] C) Plastering to ceiling with cement morter (1:4), 10mm thick

Plaster (to wall, floor, ceiling, etc) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course, scaffolding/staging where necessary (ground floor).[excluding cost of chipping over concrete surface] b) Plastering to inside wall with cement morter (1:6), 20mm thick

Plaster (to wall, floor, ceiling, etc) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course, scaffolding/staging where ecessary (ground floor).[excluding cost of chipping over concrete surface] C)Plastering to the outside with cement morter (1:6), 15mm thick

Labour for Chipping of concrete surface before taking up Plastering work.

Neat cement punning about 1.5mm thick in wall, dado, window, sills, floor, drain, etc.

(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.

Colour washing with any shade with Stainers, as required including cleaning and smoothening surface thoroughly : (i) Other than yellow, pink.

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) (b) Two Coats ii) Solvent based interior grade Acrylic Primer

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification. In Ground floor: (iii) Two coats. b) Painting to outside plastering to the Wall

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

(A) Painting with best quality synthetic enamel paint of approved make and brand cluding smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white)

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @0.20kg/Sq.m. (b) Area of each tile above 0.09 Sq.m (i) Coloured decorative

PLUMBING WORK Supply of UPVC Pipe & fittings B Type confirming to IS:13592-1992 110mm dia (SP, WP & RWP)

ii) Plain Tee

iii) Door tee

v) Plain 'Y'

vii) Double 'Y'

ix) Bend 45 degree

xi) Door Bend

xv) Vent Cowl

xx) 125/110 P trap with W.C. ring 75mm

Sub Total

Please Enable Macros to View BoQ information