DAY TO DAY MAINT OF BR SERVICES IN DOMESTIC AREA IN AKASH VIHAR ZONE B AT AF STN SURATGARH

Amount

BOQ (DAY TO DAY MAINT OF BR SERVICES IN DOMESTIC AREA IN AKASH VIHAR ZONE "B" AT AF STN SURATGARH)

Dismantling of old U/S grating with trap with PVC Nahani / floor trap and square in size of 100X100 mm including MS chromium plated grating 125mm dia for floor trap / Nahani trap to repair leakage complete all as specified and directed.

M&L CP Bib taps long body, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass cast copper alloy bib taps with wall flange fancy type of 15 mm bore quarter turn fixed in repair. complete all as specified and directed.

M&L CP Fancy type Pillar cock 15mm bore cast copper alloy with capstan heads rocket type with areator fixed in repair complete all as specified and directed.

S&F in repair CP concealed stop Cock fancy type/ angle stop cock screwed both end for iron pipe 15 mm bore complete all as specified and directed.

S&F in repair Chromium plated Overhead Rain shower rose in square pattren of size 200 mm * 200 mm with revolving joint and shower arm with wall flange 15 mm bore fancy type any colour and fixed in repair complete all as specified and directed.

S&F in repair stop valves/angle valves , castcopper alloy, screwed down,high pressure, with crutch orbutterfly handle, screwed both ends for iron pipe or for unions and fixedstop valve 15mm bore CP/ Copper alloy fancy type, chromium plated complete all as specified and directed.

S&F in repairs CP grating with or without hole 100/125 mm dia round fix on floor / nahani trap complete all as specified and directed.

S&F in repairs PVC connection 15mm dia 60cm long with 2 Nos PVC check nuts with washer complete all as specified and directed.

S&F in repairs waste fittings brass chromium plated 32mm dia complete all as specified and directed.

Taking up or down existing unserviceable steel tubing and connections and S&F new steel tubing and connections in new or old position (walls, ceiling, floors, trenches etc ) Bore of pipe 15mm complete all as specified and directed.

All as per item No 22 above but 20mm bore

All as per item No 22 above but 25mm bore

S&F Medium grade GI tubing 15 mm bore with all fittings , to walls, ceiling or laid in floors etc, complete all as specified and directed.

Ditto all as per item no above here in before but in 20mm bore pipe, complete all as specified and directed.

Ditto all as per item no above here in before but in 25mm bore pipe, complete all as specified and directed.

Cutting chases pinning in making good to facing where required and pointing in CM (1:3) for concealed water tubing etc as in brick walls exc 10 cm but not exc 20 cm girth complete all as specified and directed.

S&F in repair 20 /25mm bore gun metal, globe or gate valves, with iron wheel head , screwed both ends for iron pipe including opening the GI pipe and resecuring the GI pipe in the the same location. (no separate measurements for refixing of pipe will be given)

Dismantling existing water tank of capacity exceeding 250ltrs and not exc500 ltrs and removal to site and deposited in MES store yard completed as directed by Engr-in-Charge

Dismantling existing water tank of capacity exceeding 500ltrs and not exc1000 ltrs and removal to site and deposited in MES store yard complete all as specified & directed.

S&F Rotational moulded polyethylene Double Layer water storage tanks (cylindrical vertical with closed top) cap 500 Ltr. complete all as specified in SSR and as directed by Engr-in-Charge

S&F Rotational moulded polyethylene Double Layer water storage tanks (cylindrical vertical with closed top) cap 1000 Ltr complete all as specified in SSR and as directed by Engr-in-Charge.

S&F in repair brass ball valves 20mm bore, high pressure, with polythene float & flynut screwed for iron pipe or brass ferrule complete all as spcified and directed.

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, Type 'B', ISI marked of 110mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, Type 'B', ISI marked of 75mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) bend with ovalaccess door of any radius of 110mm bore.

S&F in repair PVC (SWR) bend with ovalaccess door of any radius of 75mm bore.

S&F in repair PVC (SWR) branch piece, equal or unequal of 110mm bore.

S&F in repair Kitchen sink without drainage board in cement mortar or connecting union to pipe overall size 495mmx420mm & bowl size 410mm x 330mm x 160mm complete all as specified and as directed .

All as per items No 45 as above but with drainage board and overall size 915mmx460mm & bowl size 410mm x 330mm x 160mm complete all as specified and as directed .

S&F in repairs aluminium handle,150mm size cast type, anodised, ISI marked.

S&F in repairs aluminium tower bolts, 150mm size cast type, anodised, ISI marked .

S&F in repairs of mild steel barrel tower bolt 200 mm long stove enamelled black with bright bolt complete all as directed.

S&F in repairs of mild steel sliding door bolt 300 mm long stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on stapple plate complete all as directed.

S&F in repairs Mild steel pressed handles 150mm size, oval type, stove enamelled black, pattern and design as approved by Engr-in-charge.

Welding in any situation and in any floor butt hinges 100 mm medium weight to chowkhat after taking down shutters and refixing in same position and making functional complete all as specified.

S&F as in repairs Stainless Steel medium weight 100mm size Butt hinges including taking down door of any size and refixing in same opening complete all as directed.

S&F in repairs Galvanised mild steel wire cloth, with tinned tacks, or galvanised wire staples inlcluding cutting, shaping etc complete all as directed.

Resecuring of Galvanised mild steel wire cloth in same position any size fixed with tinned tacks, or galvanised wire staples complete all as directed. .

Hacking out old broken glass any thickness size, quality or description from wooden/steel frames fixed with wooden beads/metal pinning and S&F 3 mm thick sheet glass in squares not exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal frames etc) complete all as specified.

Demolition of existing WC and S&F vitreous china water closet Indian with 'P' or 'S' trap including provn of lime concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surface complete all as directed

S&F in repair PVC valve less syphonic action type low level flushing cistern coloured with inlet ball valve float and handle incl bracket 10 Lit capacity or equivalent) fixed in repair complete all as specified and directed .

S&F in repairs Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as directed.

S&F in repairs plastic water closet seat cover white /colour ,closed pattern with flat bottom end cover and mild steel chromium plated hanging device complete all as specified

S&F in repairs 15 mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe & fixed complete all as specified

Demolition of cement concrete in any position and pavings etc ot exc 15 mm thick above or below ground level complete all as specified

M&L for 75mm thick PCC 1:3:6 type C-2 as in flooring complete all as specified & directed by Engineer-in-Charge.

M&L PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in floors etc finishing even and smooth without using extra cement complete all as specified.

Taking down cement plaster on brick walls, raking out joints hacking for key, scrubbing down with water etc, complete all as specified & directed by Engineer-in-Charge.

M&L Rendering 15mm thick on concrete or brick masonry surfaces in CM (1:4) complete the surface even & smooth with out using extra cement as in external surfaces of wall, complete all as specified and directed.

M&L for rendering 10mm thick plaster on brick or concrete surfaces in cement mortar (1:6) finished the surface even and smooth without using extra cement on intrnal surfaces of wall, complete all as specified & directed by Engineer-in-Charge.

M&L for preparation of newly plastered surfaces of walls and applying two coats of camouflage paint of any description over one coat of primer, complete all as specified & directed by Engineer-in- Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified & directed by Engineer-in-Charge.

M&L for coloured Glazed ceramic tiles in vertical surfaces of size 450X300x7mm thick over and including 15 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified & directed by Engineer-in-Charge.

M&L for coloured Non Skid ceramic tiles 6-7mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.16 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified & directed by Engineer-in-Charge.

M&L for screed bed or bedding layer of cement mortar 1:4, 15 mm thick finished even and smooth without using extra cement, complete all as specified & directed by Engineer-in-Charge.

Renewing tiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles, complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing as in repairs HDPE flush pipe pipes 32 mm dia of flush cistern, complete all as specified & directed by Engineer-in-Charge.

M&L for prep of old plastered surfaces of walls & applying one coat of Oil bound distemper, complete all as specified & directed by Engineer-in-Charge.

M&L in repair of 18 mm thick Prelaminated particle board for cupboard shutter etc, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified & directed by Engineer-in-Charge.

S&F Continuous (piano) hinges, mild steel, bright finish or electro galvanised, complete all as specified & directed by Engineer-in-Charge.

S&F of 100 mm long Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified & directed by Engineer-in-Charge.

S&F in repairs, 15mm bore, WHB mixer, fancy type, chromium plated, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered `Hot’ or `Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified & directed by Engineer-in-Charge.

S&F, door closer hydrau lically regulated, designation No. 3, universal type, aluminium extruded sec body suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed, complete all as specified & directed by Engineer-in-Charge.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified & directed by Engineer-in-Charge.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 sqn in each pane, complete all as specified & directed by Engineer-in-Charge.

S&F 4 mm thick figured glass, pin headed type and glazing with oil putty in square n exc 0.50 sqn in each pane, complete all as specified & directed by Engineer-in-Charge.

M&L for II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specified & directed by Engineer-in-Charge.

S&F in repairsWash basins, Vitreous China of size 450x300mm (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, complete all as specified & directed by Engineer-in-Charge.

M&L for framed work as in chowkats for doors or gates of angle or other section with gusset plates, rails, foundation bolt, wiremesh, steel plates, braces etc complete, drilled for fixing of steel sheeting or other covering. Door, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails & guides) and hanging also fastening & complete all as specified & directed by Engineer-in-charge.

Taking down door chowkat or frame incl shutter area n exc 1.50 sqm each and removing to store.

Ditto all as per item No 70 here in before but area exc 1.50sqm and not exc 4.00sqm, complete all as specified & directed by Engineer-in-Charge.

Taking down door shutter exc 1 sqm and not exc 2 sqm each, complete all as specified & directed by Engineer-in-Charge.

S&F 35mm thick factory made plain framed, panelled shutters (two panels) With lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified & directed by Engineer-in-Charge.

S & F, 35 mm thick factory made second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a), complete all as specified & directed by Engineer-in-charge.

S&F In repair of 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels,one face is covered with decorative face veneer with lipping/frame to match, complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, in opening as per specification & drawing, complete all as specified & directed by Engineer-in-Charge.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing, complete all as specified & directed by Engineer-in-Charge.

M&L for preparing new/previously untreated steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer, complete all as specified & directed by Engineer-in-Charge.

M&L for dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified & directed by Engineer-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile streangth of 550 Mpa as in roof covering\ cladding to wall , fixed with self tapping screws, complete all as specified & directed by Engineer-in-Charge.

M&L for dismantling wrought iron or mild steel work of any description no otherwise provided for, complete all as specified & directed by Engineer-in-Charge.

S&F for MS work confirming to Fe-290 Gde E-165 as in post, strut, purlins & wind ties with (MS flat iron fillet, MS plate, round tubes & angle iron) necessary cutting, drilling, welding, bolting or riveting etc including embeding in concrete complete to any type of posts screwed in position with nuts, bolts & washers etc, complete all as specified & directed by Engineer-in-Charge.

M&L for preparing new wooden surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified & directed by Engineer-in-Charge.

Petty repairs to leaking in bib tap, pillar tap, stop cock, Angle valve and low level flushing cistern etc of any description including changing the washer etc, complete all as specified & directed by Engineer-in-Charge.

S&F in repairs spindles for 15 mm CP brass bib cock/stop cocks etc size 1 nos to 4 nos for full trun fittings/ half truns, complete all as specified & directed by Engineer-in-Charge.

Removal of air lock/blockage of water in GI tubing 15 mm/20 mm bore cleaning the pipe or fittings etc and refixing the same in position, complete all as specified & directed by Engineer-in-Charge.

Petty repairs to leakage in by refixing/resecuring in PVC (SWR) pipes/ CI pipes etc, complete all as specified & directed by Engineer-in-Charge.

Easing of door/windows (Complete for one no of door or window) shutters of any size/any number of pannels for easy closing/opening tightning of hinges or changing the position of hinges adjustments of lower bolts, Sliding bolts etc, complete all as specified & directed by Engineer-in-Charge.

Taking down shutters of any description etc exc 1 Sqm but nexc 2 Sqm & replacement of worn out damaged secondclass hardwood hanging styles etc & refixing in the same opening complete incl painting two coats of synthetic enamel paint over a coat of pink primer, complete all as specified & directed by Engineer-in-Charge.

M&L for welding of purpose made trade pattern box type hinges to steel windows to obtain smooth opening & closing complete including cutting existing hinge, complete all as specified & directed by Engineer-in-Charge.

S&F in repairs CP Health faucet spray with 1.5m long pipe with wall hook & fixed in repair, complete all as specified & directed by Engineer-in-Charge.

S&F in repair L bend type wall mixer fancy type cast copper alloy chromium plated high pressure with crutch or butterfly handle non telephonic,complete all as specified & directed by Engineer-in-Charge. SOL-6219 Make-Jaguar.

S&F in repair sink mixer fancy type cast copper alloy chromium plated high pressure with crutch or butterfly handle non telephonic, complete all as specified and directed by Engr in charge.

S&F in repairs, 15mm bore, Wall mixer, fancy type, chromium plated, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered `Hot’ or `Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified & directed by Engineer-in-Charge.

Taking down of existing PVC Door shutter & refixing in the same opening after necessary repairs like tightening of cleats , repairs to hinges , governing pivots etc all as directed to obtain smooth opening /closing operation complete all as specified

Taking down of existing unsv Seal Door and S&F PVC door seal complete all as specified

S&F in repair aluminium door stopper complete all as specified

S&F in repairs PVC/Rubber washer /Jumper sheet in bib cocks/pillar cock/angle valve/stop cock etc of size 15 mm bore complete all as specified

S&F in repairs rubber washer Umbrella Type for low level flushing cistern as per sample complete all as specified .

S&F in repairs CP waste coupling 25 mm size with rubber gasket etc for SS sink complete all as specifeied & directed

S&F in repairs CP waste coupling 32 mm size with rubber gasket etc for WHB etc complete all as specified & directed.

S&F in repairs PVC syphone with handle complete for low level flushing cistern complete all as directed.

M&L for prep of new plastered surfaces of walls & applying two coats of Oil bound distemper over a coat of putty, complete all as specifeied & directed

S&F in repairs CP pressure JET for EWC including flexible pipe for 15 mmdia bore complete all as specified

S&F existing cooler stand with hold fast if required and cement mortar , welding etc to the wall complete all as specified .

S&F Securing of glass of any description in existing steel frame with putty including removing of old putty complete all as specified and directed .

S&F in repairs looking mirror 450X600mm to wooden plug with CP brass screws (including) complete all as specified and directed .

S&F in repairs PVC moulded bath cabinet with mirror over all size 400x300 mm withshelves on the inner side & mirror on the shutter complete all as per sample Make Prayag / Commander /Polytuf

S&F in repairs small fittings galvanised iron medium grade such as sockets, elbow , nipple up to size 200 mm , tee , union etc for 15mm bore pipe including opening the connected pipe and refixing in the same location (ISI Mark) complete all as specified and directed.

All as per Item No . 109.00 above but for 20mm bore pipe, complete all as specified and directed.

S&F in repairs GI tank connection Nipple 15 mm bore 75mm long complete all as specified and directed.

S&F in repairs GI tank connection Nipple 20/25 mm bore 75mm long complete all as specified and directed.

S&F in repairs PVC water storage tank lid cover (Cylindrical) for 500 /1000 ltrs capacity tanks (Make : as per sample)

Welding in any situation and in any floor Mild steel body single action door spring hinge size 100 mm including taking down door of any size and refixing in same opening, complete all as specified and directed.

S&F as in repairs Mild steel body peg stays 250 mm size(minimum) to steel windows & vents, complete all as specified and directed.

S& F as in repairs mild steel body window handles (Left or right) any size to steel windows & vents, complete all as specified and directed.

S&F in repairs 40 mm dia cup board knobs fixed with nuts, screws and washers of mild steel bright finish all, complete all as specified and directed. (Make : As per sample)

S&F of cantilever bracket for sink or wash hand basin, completed all as specified and as directed .

S&F in repair Stainless steel plate rack of overall dimension not less than 750mm x 600mm x 250mm, thickness should not be less than 0.50mm complete all as directed.

S&F in repair old mortice lock from steel cupboard doors and fixing only of Brass body mortice lock of size 50mm with a set of 2 keys complete all as specified & directed.

Repairs and resecuring of cup boards including easing of CB shutters, tightening of hinges or handles/knobs hasp and staple etc complete all as directed.

S& F as in Repairs of wooden beads 2nd class hard wood of any size in cup board & glazed or gauged joinery mitres etc, all as directed by Engr-in-Charge.

S&F in repairs MS chromium plated bracket holder for curtain rods 20-25mm dia fixed with screws to pelmet boxes complete all as directed.

S&F Fancy type SS bracket heavy duty suitable for curtain rod in repair complete all as directed.

S&F in repair 20-22mm dia SS Curtain Fancy type rod in repair complete all as directed.

S&F for Fancy type caps/ side Bulbs SS suitable for curtain rod in repair complete all as directed.

Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipe etc for 250 to 500 ltrs capacity of tanks, complete all as directed. (Note: Date of cleaning to be written on the tank after cleaning)

S&F in repairs internal assembly syphonic /non syphonic type for PVC flushing cistern of cap 9/10 Ltr complete all as specified and directed.

S&F in repairs PVC handle incl lever arm assembly for PVC Low level flushing cistern complete all as specified and directed.

S&F in repairs 32mm dia PVC waste pipe flexible type for WHB or sink 60cm long with union complete all as specified and directed.

S&F as in repairs in ball valve of PVC complete with aluminum rod with polyplast ball for 15mm dia iron pipe complete all as specified For low level flushing cistern.

S&F in repairs mild steel peg set of five/Six complete all as specified and directed.

Notes :- (a) The under mentioned works will be carried out in SMQ,WOMQ, Offr Md qtrs, offr mess, SNCO mess, OR mess and OTM Accn in Akash Vihar under the area of AGE B/R Suratgarh (List of building :- P-49, P-253 to P-256,P-338 to P-349,P-427 to P-428, P-544,T-50,T-95 to T100, P-246 to P-251,P-318 to P-337,P-359 to P-370,P-545 to P-547,P-875 to P-882, P-47 to P-48,P-350 to P-358,T-101 to T-107, T-37,P-408,P-840,P-776, khanna billet, (b) All complaints recieved through IVRS , ARMAN App ,telephonically or physically at the Service centrs shall be required to be attended /rectified within the period as specified herein after . (c) Cost of T&P (Incl Ladders), misc sundry materials, Labours, dresses for labours & other safety gears as required shall be deemed to be included in the quoted rates by the contractor for the respective items. (d) The following workers are required per day to address the day to day maintenance works. (i) Highly Skilled Plumber/Pipe Fitter - 01 Nos (ii) Highly Skilled Carpenter - 03 Nos (iii) Mazdoor/Helper for Pipe Fitter & Carp - 02 Nos (iv) Highly Skilled Mason with one Helper -01 No Each (As & when required) (v) Highly Skilled Welder with one Helper -01 No Each (As & when required)

Notes :- Contd/-- (e) The priority & Duration of complaints to be attended by the contractor shall be as under Priority I :- To be attended within 12 Hrs ( Complaints Like Leakage in bib taps ,stop cock , water overflow ,removal of Air Lock ,repairs to door locks,) Priority II :-To be attended within 72 Hrs (Leakage of pipe lines ,flushing cisterns etc & replacement of iron mongery etc , easing of doors & windows etc.) Priority -III :- To be attended within 7 Days (Replacement of glass panes , doors & windows parts , PVC connection.flushing cisterns ,cup board repairs , replacement of kitchen sink,plate rack,curtain rods etc). If in case a complaint is not resolved within the specified time period the contractor shall be liable for a penalty as under. Rs 350.00 Per Complaint per day after the specified period. In case of any dispute regarding the penalty the decision of the Accepting Officer shall be final conclusive & binding .

Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents.

M/s JUGAL KISHORE MISHRA AND SONS (BID ID -3165608)

M/S Shree Ram Enterprises (BID ID -3165093)