Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 2 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹1.8 Cr
EMD Value
₹99,000
Closing Date
6 Dec 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
JOint Commissioner / Executive Officer
Kanyakumari District Temples, Suchindrum - 629704
Construction of Shopping Complex for Arulmigu Thanumalaya Swamy Temple at Suchindrum
2023_HRCE_391074_1
J.C./E.O.1166/2022/G1
Open Tender
Civil Works - Buildings
Lump-sum
540 days
Suchindrum
Please refer Tender documents.
6 documents required · 6 mandatory
₹0
₹99,000
6 Dec 2023
20 Nov 2023
6 Dec 2023
20 Nov 2023
6 Dec 2023
20 Nov 2023
Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.
Supplying and filling with filling M sand gravel mix 1:1 including cost and conveyance of m-sand and gravel and all labour charges for filling, ramming etc complete complying with standard specification.
Supplying and filling with filling M sand lime mix 1:1 including cost and conveyance of m-sand and gravel and all labour charges for filling, ramming etc complete complying with standard specification.
Cement Concrete 1:5:10 (One Cement, Five M.Sand and ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification
Refilling with Conveyed Gravel other than M.Sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification
Supplying and filling in foundation, basement, etc with filling M sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
Supplying and erecting steel centering for sides and soffits including supports and strutting up to 3.29 metre height for plain surfaces such as RCC square or rectangular columns, top and bottom slabs of sunshade boxing sill slabs etc., with necessary facia etc., with all cross bracings using mild steel B.G., 10 sheets of size 90cm x 60cm stiffened with welded mild steel angles of size 25mm x 25mm x3mm for boarding laid over silver oak (Country wood) Joists of size 10cm x 6.5cm spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete complying with standard specification.
Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)
Supplying and erecting steel centering for sides and soffits including supports and strutting upto a height of 3.29 metres for plain surfaces such as RCC slabs, beams TEE or Ell beams lintels stair cases beams etc with all cross braings using mild steel B.G. 10 sheets of size 90cm x 60cm stiffened with welded mild steel angles of size 25mmx25mmx3mm laid over silver oak (country wood) joists of size 10cm x 6.5cm spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13 cm diameter spaced at 75cm centre to centre etc complete complying with standard specification in all floors.
Providing and laying in position, Standarised Concrete Mix M25 Grade in accordance with IS : 456-2000, using 20 mm and down graded hard brocken granite stone jelly for all RCC items of works with minimum cement content of 350 kg /m3 and maximum water cement ratio of 0.50, including admixture (plasticiser / super plasticiser) in recommanded proportions as per IS : 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about ( 5 cum )7730 kg of 20 mm machine crushed stone jelly and with about ( 3.30 cum )5156 kg of 10 - 12 mm machine crushed stone jelly and with about ( 4.79 cum )7670 kg of M.Sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing etc. and providing fixtures like fan clamps in RCC floor / roof slabs where ever necessary without claiming extra etc, complete complying with stsndard specification and as directed by Departmental officers. The course and fine aggrigates to be used should comply with the requirements of IS Standards. ( No separate payment will be made by the Department for the excess usage of materials.)
Foundation and Basement
Above basement Groundfloor
Above basement First floor
Above basement Second floor
Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)
Brick work in following Cement Mortar using best quality of country bricks of size 8-3/4" x 4-1/4" x 2-1/4" for foundation and basement including curing, etc., complete complying with standard specifiction.
Foundation and Basement C.M.1:5
Above basement Groundfloor C.M.1:6
Above basement First floor C.M.1:6
Above basement Second floor C.M.1:6
Damp proof course with Cement Mortar 1:4 (One Cement and Four sand) 12mm thick mixed with best approved quality water proofing compound conforming to Indian Standard specification as specified by the departmental officers at 2% by weight of cement used, finishing and curing etc. complete complying with standard specification.
Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers
Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 300 x 300 x 8 mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three M sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Departmental Officers before use on works)
Paving the floor with Pre- Polished Concrete anti-skid step tiles of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three M sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Departmental Officers before use on works)
Dadooing walls with following best approved quality, white / colour glazed tiles of 450 x 300 x8mmfollowing sizes set in Cement Mortar 1:2 (One Cement and Two P-Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.
Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.
Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.
Painting two coats of newly plastered wall surface with ready mixed plastic Interior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface ect., complete complying with standard specification.
SS Door Frame of 100mm x 65mm cross sectional size with necessary rebate for housing the shutters, manufactured with cement concrete of grade not less than M25 using 10mm and below graded stone jelly and using steel reinforcement as per CE (B) Circular instructions
Supplying & fixing door shutters for Solid core particle board flush shutter of exterior grade laminated 35 mm thick conforming to IS:12406/1989 with 35x12 mm T.W.Lipping on all edges with necessary adhesives and CP screws complying with standard specifications. The rate is inclusive of threee coats of best quality varnish but excluding cost of furniture fittings.such as 300 mm tower bolt 2nos, 200mm towerbolt I no. 300mm Aldrop 1 No. Alu handle ornamental type 2 Nos,and 1 No. Door stopper etc complete.
Supplying and fixing rigid PVC paneled door shutter made from M.S box section of size 19mmx19mm, 19gauge covered with heat moulded PVC 5mm thick and width of 50mm to form styles and rails. The panel shall be 5mm thick PVC rigid foam sheet inserted into the frame sealed to the styles and rails and 5mmx25mm PVC beading is provided on all sides with furniture fittings etc., complete.
Supplying and fixing Rolling shutters with I.S.I. marked pull and push type made out of 18 BGX 3” lathe sections which consists of five main parts like curtain of 18 BGx3” the sections cut to required size and filled with heavy cast iron/MS. clips (for 8’0” (ie)2.45m high rolling shutter lathe sections provided shall be not less than 37numbers lock plate of MS. shut 10 BG reinforced with 40x40x6mm MS angles of the bottom and fitted with heavy latches and locking arrangements and one handle on either sides. pressed guide channel of 10 BG MS sheet and attached to the side brackets with 20mm square bar. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc.
Supply and fixing of UPVC windows of casement type of the following sizes of approved standard quality 1.50 m x 1.75 m, 1.20 m x 1.75 m, 1.20 m x 1.30m, 0.90x1.30m.The window should be of multi chambered sections with wall thickness of 2.20mm reinforced with hot dip galvanized to 125GSM and 100% corrosion free. The corners and joints should be screwed and pasted. The window should with stand weather and resist UV radiation. Pin headed glass of 4mm thick should not allow leakage of water even in most ranging storms and should have multi chamber profile with double seal that ensures in herent insulation against sound infiltration. The window shutter should have key lockable action security protective hinges, strong double and triple glazing options are to be provided as per the size for arresting noise and every loss. The connecting mechanism between sash & outer frame that enables opening of the window to the desired size and non corrosive SS304 grade should be used for friction stay. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The cost inclusive of supply conveying and fixing in position by sealing the gap between the windows and the with silicon etc.,
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned.Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work
Supplying & fixing of Collapsible Gate with iron Angles frame of size 40mm x 40mm x 6mm and inner side 12mm Square rods and necessary painting with one coat of Red Oxide primer including cost and conveyance of all materials and all alabour charges etc complete as directed by departmental officers
Manufacturing, supplying and fixing of Entrance steel door Single leaf coverd with the following specification. M.S angles of a size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32x6mm M.S. flat is provided at required intervals in the shutter frames 18 gauge C.R. sheet is laid as panel in the shutter and welded intact for 1/3 bottom portion of the shutter. M.S. flat 18x5mm is welded over the 32x6mm M.S. flat sand witching the CR sheet in between. Additional stiffener with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter. The balance 2/3 portion at top is provided with grill at an average weight of 20 kg/sq.m with 300mm hieght of fixed glazing at top with 3mm thick Pin Headed glass including 3 Nos hinges for single leaf shutter to be provided 3 nos of holdfasts 120mm in length made of angle section spliced at the ends are welded to the outer frame of the door. Tower bolts 2nos. one at top and the other at the bottom are provided one aldrop is provided at on appropriate place in the door. A Tie bar is provided at the bottom of the outer frame to prevent twisting of frame during transportation or fixing. All members are given one coat of red oxide primer as directed by the departmental officer. The rate includes cost of all meterials, labour, charges,taxes, transportation to site of work, loading, unloading and all other incidental charges etc., complete.
Supplying & fixing of Grill with iron Angles frame of size 40mm x 40mm x 6mm and inner side 12mm Square rods and necessary painting with one coat of Red Oxide primer including cost and conveyance of all materials and all alabour charges etc complete as directed by departmental officers
Manufacturing, supplying and fixing of Stainless steel hand rails for Staircase using 50mm dia 304 L Grade SS Pipe of 1.60 mm Thick at requied location to a height of 900 mm from finished floor level welded to 38 mm dia SS pipe post of 100mm thick at vertical at 900mm center with 2 Nos of 25 mm dia intermediate horizontal SS pipe of 1.60 mm thick in between the vertical pipe has to be welded to the 100x 100x 6mm M.S plate encased in the base concrete etc....
Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing zine Chrumat priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
Providing Anti-termite treatment to soil adjecent and under building foundation, plinth periphery of the building by application of chemicals of IS 63613 part I to IV in stages to suit the progress of work consist as per the detailed specification as below. Including breaking of termite mounds, making holes with crow bar, closing the holes after the treatment and including cost of chemicals, labour charges, transport and storing etc., complete and as directed by the departmental officers.
Supplying laying and jointing UPVC pipes of super thick of approved quality and best quality conforming to ISS and with ISI mark of the following sizes including cutting threading and fixing G.I. specials but excluding cost of such specials. Fixing into Bore well / below ground level for erection of compressor motor, suction line air pipe etc., complete complying with standard specification.
25 mm Dia UPVC pipe
15 mm Dia UPVC pipe
Supplying, laying and jointing UPVC Pipes of the following dia of approved quality and best variety above ground level including fixing of G.I Specials but excluding cost of such specials and cutting and threading of pipes but including fixing to the wall with necessary clamps and screws, Teak wood plugs making holes in the wall (or) drilling holes in the roof and making good of the disturbed portion to the original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. etc., complete complying with standard specification.
25 mm Dia UPVC pipe
40 mm Dia UPVC pipe
20mm dia UPVC Pipe
Supplying and fixing in position the following UPVC Specials of heavy type and approved quality and good variety excluding fixing charges but including necessary cutting and threading of GI pipes, jointing the GI specials and painting with two coats with good variety and best quality synthetic enamel paint over a coat of red oxide primer and jointing the specials with pipe line using shellac etc., complete complying with standard specification. (The GI specials should be got approved by the Executive Engineer concerned before use on works.)
25mm UPVC Coupling
25mm UPVC Elbow
25mm UPVC Nipple
25mm UPVC Tee
25mm x 20mm uPVC Reducer
20 mm UPVC Coupling
20 mm UPVC Union
20 mm x 15mm uPVC Reducer
15 mm UPVC Pipe Nipple
15 mm UPVC Coupling
15 mm UPVC Elbow
Supplying and fixing in position the following Gun Metal Wheel of best approved make and heavy type quality including cost of cutting, threading of the pipes and fixing to the G. I. Pipe in position with white lead, spun yarn etc., complete complying with standard specification.
25 mm dia Wheel Valve
40 mm dia Wheel Valve
Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)
Supplying and fixing of PVC water storage tank of best approved quality and make of super thick with lid of capacity of 1000 litres with accessories etc., complete as directed by the departmental officer. (The PVC water storage tank should be got approved by the Engineer before use on work)
Drilling of borewell anywhere in Tamilnadu inculding transportation from one place to another place within Tamilnadu in alluvial soil or sedimentary strata of clay and sand or sand, stone, shale, pebbles, boulders etc., by first taking a pilot bore of 140mm/150mm dia and then enlarging to required dia by direct or reverse rotatry mud and circulation method using Contractor's rig,fual,labour,drilling,betonite mud and water required for drilling at the site shown by the TWAD officers inculding constructiof mud pit (only Calyx drills are to be used).
0 to 60 m depth ending below G.L
From 60 m upto 90 m Depth ending from ground level
Supply of 150mm CS dia PVC casing pipe 6 kg/cm2 including cost and conveyance etc complete complying with standard specification. and as directed by the departmental officers etc., complete.,
Supply of 150mm CS dia Special Blue Slotted Pipes 6 kg/cm2 including cost and conveyance etc complete complying with standard specification. and as directed by the departmental officers etc., complete.,
Labour charges for inserting 150mm O.D. Pvc casing pipes in the drilled bore including jointing the pipes etc .complete complying with standard specification. and as directed by the departmental officers etc., complete.,
Bore Cap using M.S..Flat of size 1 cm x 3 mm and M.S.Sheet on top with bolting arrangements for securing the cap in position.(Bore Caps with M.S.Couplings need not be made) )
Suppling and fixing of 2 H.P Submersibe pump etc., complete complying with standard specification. and as directed by the Departmental Officers etc., complete.,
Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Departmental officers before use on works).....
Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).
Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)
Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Departmental officers before use on works).
110mm dia door bend
75mm dia door bend
110mm dia plain bend
75mm dia plain bend
Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level
110 mm PVC Soil Pipe
75 mm PVC Soil Pipe
Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)
Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).
Supplying and fixing in position CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Departmental Officers before use on works).
Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).
Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.
Supplying and filling 40mm guauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc. complete complying with standard specification.
Brick partition walls using best quality using Country Bricks of size 8-3/4" x 4-1/4" X2-3/4" in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) Foundation and Basement
Supplying, laying and jointing glazed stone ware pipes of the following dia of approved quality with spigot and socket ends and fixing them in dry condition using spun yarn and cement including petty masonry shoring and strutting wherever found necessary and laying the pipe line in the alignment at the specified gradient and testing with necessary tools and plants, etc., and re-filling the trench with excavated earth and levelling the ground etc., complete complying with standard specifications. (Earth work excavation, re-filling with excavated earth will be measured and paid separately).
100 mm Dia
Supplying, laying and jointing glazed stoneware pipes of following dia of approved best quality with spigot and socket ends (in reverse direction) in dry condition and laid in loose joints (i.e.) without cement and spun yarn, so that the waste water can be drained to the trenches already available, excluding cost of earth work excavation, cost of re-filling with sand / earth, but including laying the pipe in true alignment and gradient and conducting required water supply test for draining with necessary tools and plants, etc., complete complying with standard specifications.
100 mm Dia
Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers
Supplying and fixing in position 110mm dia PVC tee of best quality with spun yarn and conducting necessary water test etc., complete as directed by the departmental officers. Complete complying with standard specification. (The stoneware specials are to be got approved by the Departmental officers before use on works.)
Cement Concrete 1:3:6 (One Cement, Three M-Sand and Six broken stone jelly) using 20mm size hard broken stone jelly , excluding cost of centering shuttering reinforcement grills and fabrication charges but including curing etc. complete.
Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three sand), 20mm thick in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers.
Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed.
Brick work with dry bricks using Country Bricks of size 8' 3/4'' x 4 1/4 '' x 2 3/4''for the following items including curing etc complete complying with standard specification.
Supply and fixing of stored pressure ABC (Mono Ammonium Phosphate) Powder Type Fire Extinguisher of 6 kg capacity as per IS :15683 with pressure Gauge, discharge hose & control nozzle, wall mounting bracket,safety clip etc including conveyance, all incidential charges, necessary scaffolding and re-doing the dismantled portions to its original condition whereever found necessary etc, complete as per standard specification and as directed by the Departmental Officers, Make: EXCELLANT / SAFETYFIRST / EQUIVALENT
Suppling and fixing of 1 HP Mono block pump complying with standard specification. and as directed by the Departmental Officers etc., complete.,
Supplying and paving the Paver Block flooring using rubber mould paver block (colour) of standard size over the m-sand filling of 83mm thick including, laying compacting with power machine icluding loading transportation and colour pigments of paver blocks, including Cost and conveyance of all materials labour etc complete with standard specification.
Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with GI Flush mounting box ,plastic combined cover plate and 6A One way modular type (one module) switch with light / fan marking and making good of the concealed portion with suitable color for PVC light point (All switches ,cover plate and GI mounting box should be higher end company make (For light points) (Data-1)
Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with GI Flush mounting box ,plastic combined cover plate and 6A Two way modular type (one module) switch with light / fan marking and making good of the concealed portion with suitable color for PVC light point (All switches ,cover plate and GI mounting box should be higher end company make (For Staircase light points) (Data-2)
Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with GI Flush mounting box ,plastic combined cover plate and 6A One way modular type fan marking (one module) switch with fan step regulator (2 module) making good of the concealed portion with suitable color for PVC fan point (All switches ,cover plate and GI mounting box and fan step regulator should be higher end company make (For Fan points) (Data-3)
Supply and fixing of 9W LED Bulb for BH point (Data - 4)
Supply and fixing of single box type 4'20W LED fitting with TW round blocks on wall or ceiling with with PVC unsheathed copper leads from terminals to the fitting (LED fittings should be of Higherend company make like philips/cromption etc) (Data -5)
Supply and fixing of 30W LED street light fitting with pressure diecase Aluminium housing with IP 65 Protection with 20 mm dia G.I. pipe and bend class-B complete on wall with PVC unsheathed copper leads MS clamps and Aluminium painting LED fittings should be philips /Cromption/ Havels Higher side make. (Data - 6)
Supply and fixing of 1200 mm (48") sweep A.C ceiling fan 5 star rated without regulator with 300 mm downrod on the existing clamp with connections of suitable PVC copper wire. (Fan should be of Higher end company like Cromption/ orient/ Havels) (Data-7)
Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall (SD 114)
Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan (SD 120)
Supply and fixing of AC / DC 76mm buzzer / call bell suitable for 230 volts 50 c/s single phase AC supply on suitable TW board with push switch(SD-105)
Supply and fixing of 3 nos 6 Amps 5 pin universed wall socket 2 module with 3 nos 6A SP ft control switch (one module) concealed in suitable G.I. Flush mounting box, plastic combined cover plate with connections complete (All accessories like G.I. boxes, covered sheet, switches should be of higher end company make) (Data-8)
Supply and fixing of 1 no 16 Amps 3 pin socket (3 module) with 1 No 16A switch 1 way - 1 module concealed in suitable G.I. flush mounting box, plastic combined cover plate with connections complete (All accessories like G.I. boxes, corned sheet and switches should be of higher end company make) (Data - 9)
Supply and fixing of 1no 6A/16A Socket 3 module Concealed in suitable G.I flush mounting box covered with plastic combined Cover plate with connections Complete.(All accessories like G.I box, Coverplate and socket should be higher and Company make) (For Electric Water heater) (Data-10)
Supply and fixing of 1no 16 switch 1way with indicator-1 module on suitable G.I - flush. mounting box, covered with combined plastic cover plate in flush with wall with Connections Complete (For Electric water Heater Control switch) (All accessories Like G.I box, Switch and Coverplate should be Higher and Company make)(Data-11)
Supply and fixing of 1500W automatic electric water heater of 35 litres capacity suitable for 230V 50 c/s AC supply on suitable MS clamps with 3 core flex wire but without plumbing connection(SD-104)
Supply and fixing of 40A doule pole MCB Switch in a sheet steel enclosure suitale for 2 pole MCB . Including wall cutting flushing and making good of the wall with earth connection (Data - 12)
Supply and fixing of 40A Double pole MCB Isolators in a sheet steel enclosure suitable for 2 pole MCB including wallcutting flushing and making good of the wall with earth connection (MCB should be Legrand make) (For single phase service near 1 dia meter board) (Data-13)
Supply and fixing of 63 A four pole MCB Isolator in a sheet steel enclosure suitable for four pole MCB including wall cutting, flushing and making good of the wall with earth connection (MCB should be Legrand make)(For Three phase Service near 3 phase meter board) (Data-14)
Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board of double door type with metal door with IP43 protection with 1 No. 32A DP MCB as incoming and 6 Nos. 6A to 32A SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only (The MCB DB and MCB's should be Legrand or higherend make)(for Common Lighting in GF & FF and Rooms in FF and all shops)
Supply and fixing of vertical type 8 way triple pole and neutral MCB distribution board in sheet steel enclosure double door type with IP42 protection with 1 no 63A 4 pole MCB as incoming and 24 Nos. 6A to 32A SP MCB as outgoing in flush with wall and making good of the Concealed portion with earth Connection (The MCB DB and MCB's should be Legrand or Higher end make)(Data - 16)
Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated single core unsheathed Copper conductor of 1100V grade in Suitable PVC rigid pipe on wall and ceiling with painting of suitable colour(For call bell connection)(Data-17)
Supply and run of 2 of 2.5 sqmm (22/0.3) PVC insulated single core unsheathed Copper conductor of 1100V grade in Suitable PVC rigid pipe on wall and ceiling with painting of suitable colour(For 3 nos 5A plug sets)(Data-18)
Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour(For 16A plug in shops and Room Toilets water heater)(SD-57)
Supply and run of 2 of 6 sq.mm. (84 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour(For single phase MCB DB'S, 40A DP MCB Isolators and switches)(SD-58)
Supply and run of 4 of 16 sqmm (101/0.45) PVC insulated Single Core unsheathed Copper Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with Painting of suitable colour(For 3 phase 63A MCB DB and 63A FP isolator)(Data-19)
Supply and run of 2 of 6 sq.mm. (84/0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') bent at both ends with necessary angle iron up right and end supports for mains(SD-71)
Supply and run of 4 x16 sqmm (101/0.45) PVC insulated multistrand fire retardant flexible copper cable Conductor of 1100V grade in 40mm dia G.I pipe (class B) suitable bent at both ends with necessary angle Iron up right and end supports for 3 phase Service Connection mains(Data-20).
Supply and run of 2 of 6 sq.mm. (84 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V on 7/20 GI bearer wire for service connection mains(SD-66)
Supply and run of 4 x 16 sqmm (101/0.45) PVC insulated multistrand fire retardant flexible copper cable conductor of 1100V grade in 7/20 G.I bearer wire for service Connection mains(Data-21)
Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit(SD-125)
Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 63A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete(SD-129)
Supply and fixing of 32A Aerial fuse unit (500A) on suitable 100x100 mm T.W concealed box with hylamsheet on the tapping pole with necessary clamps(Data-22)
Supply and fixing of 3 Phase 63A Aerial fuse unit for 3nos 63A fuse Units (500V) on suitable MS Sheet covered with 6mm thick hylam sheet on suitable angle Iron frame work on the tapping pole with necessary clamps(Data -23)
Supply and run of 1 of No.8 SWG copper conductor on suitable PVC rigid pipe on wall with painting of suitable colour for earth connection (Data -24)
Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry(SD-233)
Supplying & Installation of 1.5 TR Split Type AC unit - 5 star rated air - conditioner with coppper coil with necessary accessories for fiting including all charges etc complete.
Sub total
THIRUPPATHI CONTRACTORS
stage.html
html • 0.02 MB
finance_466003.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .