WELCOME MAINTENANCE FOR INTERNAL ELECTRICAL WORKS AT DRDO RESIDENTIAL COLONY CIDCO, NASIK

Amount

“Welcome Maintenance for Internal Electrical Works at DRDO Residential Colony CIDCO, Nasik” as per scope of works attached as Appendix-‘A’.

Electrical Items

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq.mm

15/16 amp switch

6 pin 15/16 amp socket outlet

Telephone socket outlet

Suppling and fixing of electronic regulator 100W On the existing switch board

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.

1 or 2 Module (75mmX75mm)

3 Module (100mmX75mm)

4 Module (125mmX75mm)

6 Module (200mmX75mm)

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supply installation testing and commsssioning of the following items

01 x 40 Watt LED Tube Lights fittings

01 x 20 Watt LED Tube Lights

1x11W LED Fitting

Exhaust Fan 305mm

Ceiling fan 1200mm sweep

Geyser

MCB 6Amp

MCB 10Amp

MCB 16Amp

MCB 20/25 amp

MCB 32amp DP

MCB 63amp DP

6 SWG wire

25 X 5 mm GI Strip

DSR Items

Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /weIded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

2 X 16 sq. mm (22mm)

2 X 25 sq. mm (22mm)

Supplying and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

372 X 25 sq. mm

317aX 35 sq. mm

31/ X 50 sq. mm

Shri Sai Enterprises