M/o Various Colonies under East Zone.

1.0) Running, maintenance operation of sewage pump set along with diesel engine pump Set at Dallupura as per the inventory, terms & condition and deploying the following manpower : Operator- Grade-II - 2 Nos. (6AM to 2PM & 2PM to 10PM) Khallasi - 1 No.(10.00 pm to 6.00 am)

2.0) Providing watch & ward for submersible pump set and clear water booster pump set and DG set at Distt. Centre, Mayur Palace, Mayur Vihar Phase-I as per the inventory, terms & condition and deploying the following manpower : a). Khallasi 3 Nos. one in each shift or as required by Engineer-in-charge.

3.0) Running, maintenance and operation of clear water booster pump set, submersible pump set & DG Set i/c routine, preventive & breakdown maintenance of electrical installations at District Centre Jasola as per the inventory, terms & conditions and deploying the following manpower : a). Operator Grade-II - 2 Nos. ( 6 AM to 2 PM & 2 PM to 10 PM, one in each shift) b). Khallasi - 1No. ( 10 PM to 6 AM )

4.0) Replacement of defective/ faulty12 volt D.C Battery, 180 AH, fully charged for DG set of 3 phase, 440 volt i/c connection, testing, commissioning and cartage etc. complete as if required.

5.0) Replacement of defective/ faulty of following parts in existing electrical panel board i/c testing etc. as if required.

5.1) (a) DOL Starter suitable for 7.5 HP. (make- L&T or similar superior )

5.2) ML- 1.5 Starter (L&T make ML- 1.5 FASD) (make- L&T or similar superior)

5.3) 3 Pole 32 Amp. Contactor (make- L&T or similar superior)

5.4) 63 Amp. TP&N Switch SFU Type (make- L&T or similar superior)

5.5) Digital A. Meter, V. Meter of suitable range(make- AE or similar superior)

5.6) Single phase preventer (make- AE or similar superior)

6.0) Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel,making connections, Ics=100% Icu and Operational Voltage 690V etc. as required.

6.1) 200 A, 25 KA, TP MCCB

6.2) 200 A, 36KA, FP MCCB

7.0) Repairing & rewinding of following rating Induction Motor (3 phase, 440 volt) i/c dismentling and re-assembling after rewinding and replacement of ball bearing, testing,commissioning etc. complete as if reqd. 7.1) 12.5 HP

8.0) Repairing & rewinding of 3 HP monoblock clear/dewatering pump set (make- Kirloskar)i/c dismentling, re-assembling and testing etc. complete as if reqd.

8.1) S/R of Ball bearing

8.2) S/R Rewinding of motor

8.3) S/R Connection Plate

8.4) S/R of Gland Sleeve

9.0) Repairing & rewinding of 5 HP monoblock dewatering pump set (make- Kirloskar)i/c dismentling ,re-assembling and testing etc. complete as if reqd.

9.1) S/R of Ball bearing

9.2) S/R Rewinding of motor

9.3) S/R Connection Plate

9.4) S/R of Gland Sleeve

10.0) Repairing & rewinding of 7.5 H.P. monoblock water pump set (make Kirloskar) i/c dismentaling,reassembly,cartage,testing etc. complete as if reqd.

10.1) S/R of Ball bearing

10.2) S/R Rewinding of Motor

10.3) S/R Connection Plate

10.4) S/R of gland sleeve

11.0) Lifting of existing submersible/ dewatering pump set i/c GI pipe and dismantling of GI pipe dismantling & re-assembling, connection, testing etc. complete as reqd.

12.0) Lowering of existing submersible/dewatering pump set i/c GI pipe dismantling & re-assembling, connection, testing etc. complete as reqd.

Please Enable Macros to View BoQ information