CERTAIN REPAIR TO PLASTERING FLOORING JOINERY SANITARY FITTINGS AND PERIODICALS MISC REPAIR WORKS TO BLDGS AND REPAIR/REPLACEMENT OF BARBED WIRE FENCING GATES SECURITY WALL STORM WATER DRAIN FOOT PATH HARD STANDING CLEANING OF SEWAGE LINE MANHOLE SEP

Amount

Dismantling of Brickwork or stone/ boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc, complete all as specified and as directed.

M&L for Brickwork with subclass 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed.

Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land, complete all as specified and as directed.

M&L, Rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl WPC as per user manual complete all as specified and directed by Engr-in-Charge. (WPC will be measured and paid separately).

M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for 5mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed of size 6mm with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed.

M&L for complete of newly plastered surfaces as of walls and applying two coats of cement based paint achieve uniform and smooth surface by roller brush having no sign of brush marks complete all as specified and as directed.

M&L for preparing newly Rough Cast plastered surfaces of Walls and applying Two Coats of acrylic Weather Coat Exterior Paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L for complete of newly plastered surfaces as of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer to achieve uniform and smooth surface by roller brush having no sign of brush marks complete all as specified and as directed.

M&L for preparation of new surfaces of steel and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparing new plastered surface of Ceilling and applying two coat of oil bond distemper white or any tint over a coat of primer etc complete as specified and as directed.

M&L for preparation of old painted surfaces of steel surface of any description and girth, not otherwise described and treated with one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted surfaces of concerete surface of any description and girth, not otherwise described and treated with one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted surfaces of wood and wood based of any description and girth, not otherwise described and treated with one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc.; rubbing down and stopping of surfaces using sand paper and applying one coat of oil bound distemper, complete all as specified and as directed.

M&L for preparation of old surfaces of cellingincluding brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc.; rubbing down and stopping of surfaces using sand paper and applying one coat of white wash on celling, complete all as specified and as directed.

M&L for preparation of old plastered surfaces as of walls and applying one coats of cement based paint achieve uniform and smooth surface by roller brush having no sign of brush marks complete all as specified and as directed.

M&L for preparation of old plastered surfaces as of walls and applying one Coat of acrylic Weather Coat Exterior Paint achieve uniform and smooth surface by roller brush having no sign of brush marks complete all as specified and as directed.

Demolition of cement concrete in any position complete all as specified and as directed.

M&L for PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in laying of floor finishes complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40 mm agg. ) in sub base of flooring incl demolition complete all as specified and as directed.

M&L for PCC 1:2:4 Type B-1 (using 20mm graded stone aggregate) as in flooring, coping, incl finishing the cement concrete surface even and smooth with using extra cement , rubbish off the primises incl necessary formwork where reqd and complete all as specified and as directed.

Dismantling floor hearth, floor tiles, brick tiles, stone, slabs or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and as directed.

M&L for first quality, Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sq.m but not exceeding 0.11 Sq.m, laid in floors with neat cement slurry over and including 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and as directed.

M&L for first quality coloured glazed ceramic tiles, fixed in pattern of different colour including border of size 350x 450 x 7mm thick as in vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white cement with pigment to match with shade of tiles laid on and including 10 mm thick rendering in cement mortar (1:3), complete all as specified and as directed.. Note :- Pattern of the tiles shall be approved by GE at the time of execution.

M&L for Glazed ceramic jointless light/coloured group of size exc 0.13sqm but n.exc 0.18sqm erea of each tiles and thicknes of wall tile not less than 6mm as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white cement and pigment to match, laid over and including 10mm thick plastering in cement mortar 1:4, complete all as spd and as directted. Note : shade & design as approved by EIC/GE complete all as specified.

M&L for vitrified ceramic tiles 9 to 10mm thick (square/rectangular) polished, area of each tiles (square or rectangular) area of each tile exe 0.14 Sqm but n.exe 0.36 Sqm, laid in floors set and jointed with neat cement slurry and including 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and as directed.

M&L for Granite 18-20mm thick (of any type) work (table rubbed and polished), floor, wall, pillars in steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeing complete all as spd and as directed.

M&L for Kota Stone 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, flooring platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeing and complete all as spd and as directed.

M&L for chequered tiles of size 300 x 300 x 25 mm thick (colour and glazed approved by EIC) with grey cement and pigments laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry, complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block of 60mm thickness any shape and size confirming to IS 15658 -2006, with grey cement, pigment incl 25mm thick sand filling as cushioning complete all as specified and as directed.

All as per srl item 32 above but except paver block shall be reused after necessary cleaning , removing vegetation and making good complete all as specified and as directed.

S&F in repair, brass CP central hole mixture 15mm bore (dia) without Popup waste system with 450mm long proivded hoses incl flange suitable for wash hand basin complete all as specified and as directed.

S&F in repair brass CP wall mixture unit HOT and Cold Shower suitable for fixing in 15mm bore dia pipe incl flange complete all as specified and as directed.

S&F brass CP sink mixer 15mm bore dia , wall mounted with 122mm (5") Swivel spout connecting legs incl wall flanges complete all as specified and as directed.

S&F in repairs CP brass health faucet of 15mm bore pipe with 1.5 mtr. Flexible pipe screwed for iron pipe fancy type long body complete all as specified and as directed.

S & F in repairs 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and as directed.

S&F in repair plastic water closet seat cover of any color closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devices, connected to drains outlet, complete all as specified and as directed.

S&F Vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts flushing cistern and flush pipe), fixed in repairs, including connection to waste pipe, flushing pipe, anti-syphonage pipe etc. and making good to floor complete all as specified and as directed.

S&F in repairs Wash basins, vitreous china, white, flat back of size 550x400mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32mm dia HDPE waste pipe and including new brackets complete all as specified and as directed.

S&F for vitreous China, wash hand basin, counter top, white, of size 530mmx445mmx195mm including brass CP waste coupling 32mm dia with long screwed shank and fly nuts,32mm dia, chain and plug, porcelain stopper with and including PVC collapsible waste pipe of suitable length, fixed in repairs, complete all as specified and as directed. Make: Jaquar Cat Part No. ECS-WHT-601 or equivalent out of makes spd in list of makes.

S&F wash hand basin table top of size 460x460x170 mm vitrous China including , waste coupling & PVC waste pipe of 32 mm dia etc in repair. complete all as specified and as directed. Make Jaquar cat part No - JDS-WHT-25935 or equivalent out of makes spd in list of makes.

S & F in repair vitreous china urinals, half stall type (635x450mm) , complete including providing and fixing , bedding urinal against wall in cement mortar 1:2 , pointing around urinal back in cement , grating and union for discharge pipe, CP urinal spreader and fitting with bottel trap & CP waste coupling complete all as specified and as directed.

S&F for One piece closet with bowl for cupled WC with PP soft seat cover, hinges fixing accessories and accessories set of size 360mmx680mmx765mm, strap 220mm cistern with cistern fittings and necessary fixing fittings complete, fixed in repairs, complete all as specified and as directed. Make: Jaquar Cat Part No. CNS-WHT-755SS or equivalent out of makes spd in list of makes.

S & F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors including taking down complete all as specified and as directed.

S & F 20mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors including taking down complete all as specified and as directed.

S&F 75mm bore PVC(SWR) pipes single socketed Pressure rating @4Kg/Sq cm medium grade in any length with rubber ring joint, fixed to walls / trenches including taking down eaves, gutters rain water pipes (any size or pattern) including all all fittings as bends, sockets & clamps, clamps 50mm x 5mm ,incl dismantling of old unsv PVC pipes complete all as specified and as directed.

S&F 110mm bore PVC(SWR) pipes single socketed in any length pressure rating 4Kg/Sq cm medium Grade fixed to walls in any position or laid in floor/earth with dash true nut and bolt at every 2mtr length including) including all fittings as bends, sockets & clamps and incl taking down old / unsv PVC pipes incl bends & sockets complete all as specified and as directed.

S&F as in repair pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with and including back filling with PCC (1:3:6), type C-0, complete all as specified and as directed.

S&F as in repair pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with and including back filling with PCC (1:3:6), type C-0, complete all as specified and as directed.

S & F as in repair 35mm thick 2nd class hard wood factory made Glazed and skelton shutters open rebated and prepared to receive glass, gauge etc edges of framing plain chamfered or rounded fitted with cut & mitred beads for securing glass etc size of members shutter as specified in SSR Part I Section 8, Clause 8.23 (a) supplied and fitted to chowkhats incl 02 x 200mm alumn tower bolt, 02 x alumn door handle, 01 x alumn sliding door bolt 250mm long to each shutter complete all as spd and as directed.

S&F as in repair factory flush shutter made 30mm IInd class hard wood , solid core construction, with block board core and plywood face panels,one side laminated type incl 02 x 200mm alumn tower bolt, 02 x alumn door handle, 01 x alumn sliding door bolt 250mm long to each shutter complete all as specified and as directed.

S&F as in repair PVC Door Frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinfoced with MS Square tub, suppling & fixing in opening as per specification and drawing complete all as specified and as directed.

S&F in repairs Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed tothe stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F in repairs, stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks, or galvanized wire staples, or fixed to wooden frames with first class hard wood bead, complete all as specified and as directed.

S & F in repair, 3mm thick ordinary glass, pin headed type and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, incl Hacking out old broken glass complete all as specified and as directed.

Taking down existing toughended glass door of 10mm thick glass of any size any size / area and carrying out necessary fitting / adjustment / balancing and taking down unserviceable hardwares and replacing with new hardwares as fixing of floor door closer / locking arrangement / handle and other necessary fixing arragement etc, for smooth functioning and and re-fixing the toughened door shutter in position all as specified and as directed. Notes :- Rates are inclued for all misc hardware as clips, rubber beading, hinges or handles and deemed to be in qouted rates.

Supply only double action floor spring, hydraulically regulated, made up of minimum 1.25 mm thick aluminium alloy sheet /stainless steel 304 grade foundation box, main body with stainless steel cover governing pivot made of brass and incl other parts as TOP Pivot, Top Patch and Bottom Patch made of heavy duty of load bearing capacity 80kg complete all as specified and as directed.(Make OZONE of equivalent as approved by GE)

Supply only double action TOP Pivot, Top Patch and Bottom Patch as in supporting of floor door closer to fix toughned glass of heavy duty of load bearing capacity 80kg made of Stainless steel complete all as specified and as directed.

Taking down existing ACP sheet frame / glass frame fixed in wall as glazing at any height upto 12 mtr and carryout / replacement of necesary damaged rubber biding and applying silicon / other reqd adhesive to stop leakage and refix ACP sheet frame / glass frame in positon in wall as glazing at any height upto 12 mtr complete all as specified and as directed. Notes :- Rates are inclued for all misc hardware as clips, rubber beading, silicon / adhesive and deemed to be in qouted rates.

Taking down existing aluminium door shutter / window shutters any size and carry out necessary servicing and taking down unserviceable hardwares and replacing with new hardwares as rubber clips, pivot hinges, floor door closer, hydraulic door closer, hinges, beadings , handle , locking arragement etc, for smooth functioning and and re-fixing the door / window shutters in position complete all as specified and as directed. Notes :- Rates are inclued for all misc hardware as clips, rubber beading, hinges or handles and deemed to be in qouted rates.

S&F anodised aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators , partions walls with one or more rebates including joining cleat , rubber clips for fixing etc. as in repair complete all as specified and as directed.

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary 5.5mm thick sheet glass , joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, 200mm aumn tower bolt, locking arragement aluminum snap beading screws etc. as in repair complete all as specified and as directed.

S&F anodised aluminium window/ ventilors shutters / partion wall, aluminium section weighing 0.55 kg/m including necessary 5.5mm thick sheet glass , joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, 150mm aumn tower bolt, locking arragement aluminum snap beading screws etc. as in repair complete all as specified and as directed.

S&F in repairs aluminium grills standard design, fixed in position including taking down existing unserviceable grills of any description and making good the disturbed surfaces all as specified and as directed. Note: The weight of the grill shall not be less than 2.2 Kg/SqM.

S&F Rotational moulded polyethylene water storage tank 500 litres capacity, ISI marked triple layer construction (cylindrical vertical closed top), hoisted & fixed in position including S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for 20mm bore GI pipe of having weight not less than 210gms including all fittings and gate valves with iron wheel head 20mm size, including dismantling of old water tank complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tank 1000 litres capacity, ISI marked triple layer construction (cylindrical vertical closed top), hoisted & fixed in position including S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for 20mm bore GI pipe of having weight not less than 210gms including all fittings and gate valves with iron wheel head 20mm size, including dismantling of old water tank complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 as in repair complete all as specified and as directed.

M&L for Non-asbestos fiber cement building Boards 6.0mm thick, fixed to walls with rawl plugs and steel screws, as in repair complete all as specified and as directed.

S&F for 4mm thick acrylic sheet board of High quality with Media printing of 3m of best quality (size/frame of board , design of bd , type of print on sheet , size of studd , samples of letter, pictures, writing will be provided by accepting officer or Engr-in-Charge) and fixed at any height from GL to 29 Mtr height incl stainless steel studds (min 4 studs at each board / sheet ) complete all as specified and as directed, incl dismantling of existing damaged sheets. Note : Minimum weight of Acrylic Sheet not less than 4.70kg per sqm (Acrylic sheet make A Cast / Astari / Marka Cipta and stainless steel of grade A-ISI 304(1818). (Note : Minimum 04 Nos Stainless steel studs to be used in fixing each sheet and rates to be included in quoted rates.)

Dismantling Brick tiles or terracing tiles, single layer on roofs etc complete all as specified and as directed.

Demolition Mud in roofs, any thickness, including plastering and leaping (whether full thickness removed or only or part thereof) complete all as specified and as directed.

M&L for PCC type B-0, 1:3:6 (using 12.5 mm graded stone aggregate) as in laying on roof, coping, kerb, finishes complete all as specified and as directed.

M&L for 10mm thick rendering in cement mortar 1:3 on concrete surfaces of roof slab / conerete surfaces including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for APP based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) with 15 cm longitudinal & horizontal over lapping and joints finally pasted with thermo- fused withblow lamp laid over a coat bitumen @ 1.20 Kg /Sqm over bituminous primer 0.30 ltr per sqm as per APP manufacturer instructions etc complete all as specified and as directed.

M&L for two coat of aluminium paint over top surface of water proofing membrane etc complete all as specified and as directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 Cement : 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @3Kg of cement per sqm, top layer 15mm cement plaster with GREY CEMENT 1:1/2:2 (1 GREY CEMENT :1/2 coarse sand : 2 Marble stone chipping 10mm nominal size ) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushed and water to expose the marble ston chipppings complete all as specified. The groove shall be 15 mm wide and 15 mm deep in the top layer of washed stone girt plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden batterns, repair to the edges of panels and finishing the groove complete all as specified and as directed. Note : Area includes in this items upto 4 stories of building, necessary scaffolding and arrangements are deemed to be included in rates.

Dismantling of plain, corrugated or semi corrugated sheeting, of any description, roof coverings complete all as specified and as directed.

Dismantling wrought Iron or mild steel work of any description not otherwise provided for wind tie complete all as specified and as directed.

S& F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and as directed.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and complete all as specified and as directed.

S&F for pre-painted half circular factory made for chajja galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in chajja, roof projection etc at height upto G+3, fixed with self tapping screws as specified and incl dismantling of existing damaged RCC chaaja / roof projection and making good surface matching to existing before fixing of sheet as in repair complete all as specified and as directed.

S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet and one side plain colour PVC Sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing as in repair complete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing as in repair complete all as specified and as directed.

All as per item No 2 hereinbefore but with using old bricks including cleaning of mortar.

M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete all as specified and as directed.

Supply only liquid WPC complete all as specified and as directed.

M&L for preparation of new plaster surface or complete removal of existing treatent & apply two coats of Two Coats of acrylic Weather Coat Exterior Paint in (Camoflage Pattern / any other colour comination) with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L for preparation of new cement concerte surface of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint on concerete surface in colour / pattern over a coat of primer complete all as specified and as directed.

M&L for Kerb Stone as precast PCC type B-0,1:2:4 (12.5mm graded aggregate) as in kerbs stone or mud stops rounded or chamfered on edge, cills , copings etc incl demoliation of exisitng PCC stone / kerbs complete all as specified and as directed.

M&L for refixing of Kerb stone of pre-cast concrete solid block or slab incl taking out blocks from any position laid dry on end vertically as in road edging, jointed in cement mortar (1:6) and struck flush complete including necessary excavation, earthwork removal of spoil and temping around incl dismantling of existing kerb stone complete all as specified and as directed.

M&L for 40 mm thick PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in laying of floor finishes incl demolition complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block of 80mm thickness any shape and size confirming to IS 15658 -2006, with grey cement, pigment incl 25mm thick sand filling complete all as specified and as directed.

M&L for Providing precast cement concrete 1:2:4 type B0 louvres and jallies, 35mm thick (measured solid), including all mouldings but excluding frame set in cement mortar 1:4, incl dismantling complete all as specified and as directed.

S&F for 4mm thick acrylic sheet board of High quality with Media printing of 3m of best quality (size/frame of board , design of bd , type of print on sheet , size of studd , samples of letter, pictures, writing will be provided by accepting officer or Engr-in-Charge) and fixed at any height from GL to 29 Mtr height incl stainless steel studds (min 4 studs at each board / sheet ) as in repair complete all as specified and directed by Engr-in-Charge incl dismantling of existing damaged sheets. Note : Minimum weight of Acrylic Sheet not less than 4.70kg per sqm (Acrylic sheet make A Cast / Astari / Marka Cipta and stainless steel of grade A-ISI 304(1818). (Note : Minimum 04 Nos Stainless steel studs to be used in fixing each sheet and rates to be included in quoted rates.)

Dismantling barbed wire fencing,wire mesh , concertina coils any type etc complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

M & L for Cutting holes in brick walls/ stone wall ex half brick but not exc full brick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed.

M& L for Framed work as in fencing pole, doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete (Fe 410-W (Gde-E-250) quality A) at any position complete all as specified and as directed.

S&F in repair galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, incl securing or tying at crossing with and provn of galvanised mild steel wire, staples or steel pins, complete all as specified and as directed.

Fixing only old barbed wire (old wire shall be obtained from ser item No 100 here-in-before).

Restraining, repairs resecuring a making good staples etc only to old barbed wire complete all as specified and as directed.

S&F in repair circular concertina coil punched tape (incl spikes and handle) with 50 turns and loop dia 600mm, width of barbed 9mm dia and spacing clips 23.5mm to 24.5mm c/c and weight of coil not less than 10 to 14 kg without packing, coil length will be 6meter when opened up etc, fixing at any position/at any height, binding with angle iron ground pickets and binding of coils with clips and binding wire as per manufactures's instruction & sample as approved by GE /EIC complete all as specified and as directed.

Supply and fixing only chain link MS galvanaised fencing 4.0 mm dia and 75x75mm MS size including line wires, any mess, size and type to any type of standards, rails, straining bolts,etc including provision of binding wire complete all as specified and as directed.

M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Cleaning/pumping of septic tank and taking out mud sludges from septic tank/chamber any size of 300 to 500 users by a close container vehicle to remove a distance out side periphery of defence land complete all as specified and as directed.

M&L for Removing Complaint of Blockage (viz Blockage in Bath, Kitchen, WC & Drainage in Traps/Line from Trap to 1st Manhole, Blockage in Sewage Line from 1st Manhole to Septic Tank, Cleaning of Manhole) by deploying Trades Men as per Stipulated Time Frame from 9.00 AM to 5.00 PM and maintaining proper Records of COMPLETED and PENDING Complaints including updating status of Complaints through SMS/Manually for AFSSR, complete all as specified and as directed. NOTE : FOR ITEM No. 111: (a) If the Complaint is not attended/removed within a Day the Recovery will be levied on the Contractor for non-complelion of the Complaint at the Rate of Recovery included in Tender Document here-in-after. (b) It is mandatory on the Part of Contractor to deploy minimum ONE No. of Safaiwala/Mazdoor with requisite T&P throughout the Entire Contract Period. However required manpower and T & P, if required more to meet the requirement as mentioned in Item No. 111 is also to be arranged by the Contractor at his own Arrangements and Cost. Quoted Rates shall be deemed to include this factor and nothing Extra will be admissible on this account other than Quoted Rates for Item No. 111. In case of any dispute on this factor, the decision of Accepting Officer shall be final, conclusive and binding.

Cleaning of the under ground sewer line of any depth and size up to 300mm dia, pumping out of sewage water / sludge by manually / mechanical machine and making the strech clean and functional and removal/diposition sludge complete all as directed by Engr-in-Charge by Engineer in charge. (The Mechancial sewage cleaning machine will be brought on the site before commencement of work. The recovery on account of non usage of mechanical sewage machine Rs. 1000/- will be recoverd per day)

Excavation in trenches not exc 1.5 m wide and n exc 1.5 mtr in depth for foundation etc shaft, cesspits, manholes etc not exc. 10 sqm on plan and getting out hard /soft/loose soil even in foul position as directed by Engr-in-Charge by the Engineer-in-charge, complete all as specified & as directed.

Returning, filling in, trenches the soil in layers not exc 25 cm thick, watering and well ramming complete all as specified and as directed.

Removal of surplus soil to a distance not excceding 150 mtr away & depositing where directed by Engr-in-Charge at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed.

M&L for reinforced cement concrete drain pipes of 150 mm dia bore class NP-2, laid and jointed complete with collars etc as in repair complete all as specified and as directed.

Ditto all as in item No 116 above but internal dia of pipe 250 mm.

M&L for concrete bed to drain pipes 150 mm bore including packing under and hunching against the sides of pipe, after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregagte) etc complete all as specified and as directed

Ditto all as in item No.118 above but 250 mm dia pipe.

Cleaning/de-silting of manhole by taking out sludge in semi solid/liquid state from inside of manhole of depth n exc 1.5m and making the sewer systen serviceable and removing the sludge/foul material by a close container vehicle to remove a distance out side periphery of defence land complete all as specified and as directed.

All as per item no.120 here-in-before but depth of manhole exc 1.5 metre and not exc 3.00 metre complete all as specified and as directed.

M&L for Cement concrete 1:3:6 type B-2 (using 20mm graded stone aggregate) as in surface channels, manhole and drain complete all as specified and as directed.

Extra for forming fair finished drain or channel under 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc. complete all as specified and as directed.

Getting out soft/loose soil from existing covered Drain of any size including removal of cover and re-fixing complete all as specified and as directed.

M&L for pre cast reinforced cement concrete 1:2:4 type B1 with using 20 mm graded stone aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and as directed.

M&L for Mild steel bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Dismantling existing old vintage damaged and rusted / faded road MS sign boards complete all as specified and as directed.

Excavating in post holes (or similar holes) in each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removing surplus soil to a distance not exceeding 100 mtr making good in soft/ loose soil complete all as specified and as directed.

M&L for providing and fixing stainless steel (Grade 304) frame made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc of required size with suitable arrangement complete all as specified and as directed.

Supply and fix RATRO radium sheet / tape on stainless steel frame (size of board / samples of letter / pictures / writing will be provided by Engineer-in-charge and of best quality as approved by GE complete all as specified and as directed. Note : Stainless Steel sheet will be measured and paid seprately under appropriate items.

S&F 2/3 mm thick Aluminium Composite pannel sheet best quality including fixing accessories as in repair complete all as specified and as directed.

Manisha Yadav

ASHISH AND CO

M/S Rohit Enterprises