SPECIAL REPAIR OF ROAD AND PROVN OF HARD STANDING IN FRONT OF BLDG NO P-32 RATION STORE AND URINAL POINT NEAR TEMPLE AND PROVN OF SHED FOR STORE ROOM AT BLDG NO P-88 AND P-89 WITH CERTAIN ALLIED WORKS UNDER GE I GOS

Amount

M&L for surface dressing n. exc.15 cm deep in soft/loose soil, complete all as specified and directed.

M&L for excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth, for foundation, etc, or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 sqm on plan and n.exc. 1.5 m in depth and getting out in soft/loose soil, complete all as specified and directed.

M&L for plain cement concrete type D2 1:4:8 (40 mm graded aggregate) as in foundations, filling and mass concrete, complete all as specified and directed.

M&L brick work with sub class' B' bricks of old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for plain cement concrete type B1 1:2:4 (20 mm graded aggregate) as in lintels upto 1.5 m clear span and other similar bands, plinth courses, string courses,parapets and railings upto 60 cm in height, copings, kneelers, apex stones bed plates, water troughs and the like including weathering, slightly rounded or chamfered anglesand throating, as directed, complete all as specified and directed.

M&L for hardcore of gauge n.exc. 63 mm, deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface using broken stones or boulders, complete all as specified and directed.

M&L 100 mm thick PCC 1:4:8 type D-2 using 40 mm graded aggregate as in sub base complete all as specified and directed.

M&L 150 mm thick (1:1.5:3) Type A-1, Plain cement concrete with using 20mm graded aggregate as in hard standing etc finished with without using extra cement , complete all as specified and directed.

Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound,Grade ‘A’, complete all as specified and directed.

Forming Construction joint 30mm deep x 10mm wide filled with sealing compound, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm in soft/loose soil , complete all as specified and directed.

M&L for removing excavated materials n.exc. 50m and depositing where directed at a level n.exc. 1.5m above the starting point in soils, complete all as specified and directed.

M&L repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.

M&L preparing existing blacktop surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and directed.

M&L for applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sq metre of paving bitumen (VG-10) complete all as specified and directed.

M&L for premix bituminous, macadam with 4% binder paving bitumen(VG-10) content by weight of total mix laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) and rolled with power roller 8 to 10 ton complete all as specified and directed.

M&L for laying and spreading of bituminous premix asphaltic dense concrete 30mm consolidated thickness with 5.5 % binder content by weight of total mix, rolled and compacted to required camber and gradient complete using paving bitumen (VG-30) any penetration complete all as specified and directed..(The SDAC laid with mechanical paver and rolled with 8-10 tonne tandom power roller).

M&L for preparation of new/old surface of road and applying 1.5 mm thick and 100 mm wide reflective resign thermoplastic paint by hot application of approved colour/make complete all as specified and directed.

S&F colour reflective pavement marker (cat eye) withmicro prismatic lens in both direction having thermoplastic body with flex resistant base & abrasion resistance creamer coating fixing of road surface with special adhesive and suitable rivet head nail complete all as specified and directed.

S&F sparkle solar road studs size 125 mm x125 mm x30 mm ht with detachable batery 6 LEDs three on each side, ultra bright LED in red/yellow colours completely water resistance and weather proof, using of adhesive and fixing procedure as per manufacturer supervision of their competent technician etc complete all as specified and directed.

S&F sparkle road side delineators with reflective and reclectgro radium stiker pasted over MS pipe approx 100 cm long fixed in cement concrete bedding 150 mm x150 mmx300 mm, 1:3:6 type C-1 (Using 20 mm graded aggregate inclnecessary earth work complete all as specified and directed.

S&F aluminium anodised galzed hung type window shutters made out from anodised aluminium frame of 'H' section size 34.00x43.5x2mm thick with 4mm tinted sheet galss (Weight not less than 0.57 kg/RM and shutter 'Z' of size 34.00x43.5x28.00mm having thickness 2.00mm (Wt not less than 0.50kg/RM) and all necessary jointing cleats , glazing, clips rubber packing, aluminium snap beading Tower bolt 100mm long 1 No and sliding hinges 180mm longs including aluminium grill with Mosquito proofing etc complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, 75mm long, 12mm dia each screwed and to be fitted with washers complete all as specified.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws incl ridge all as specified and directed by Engr-In-Charge.

M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer.

Excavation in post holes (or similar holes) each n.exc 0.5cu.m getting out, any to types of soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm complete all as specified and directed.

M&L PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate as in foundations filling and mass concrete complete all as specified and directed.

M&L for cement concrete 1:2:4, type B-1 (using 20 mm graded stone agg), 40 mm thick laid in alternate bays as in floor finishes even and smooth using extra cement complete all as specified and directed.

S&F steel work in tubular poles & trusses (framed) including purlins,rafters and special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS-1161-1979 grade St-240 complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, 75mm long, 12mm dia each screwed and to be fitted with washers complete all as specified and directed.

M&L for corrugated polycarbonate roof sheet 8 mm thick of any colour having tensile strength of 70 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws incl ridge complete all as specified and directed.

Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) for rough finished flat surface of concrete complete all as specified and directed

M&L for RCC (nominal mix) 1:2:4 type B-1 using 20 mm graded stone aggregate as in slab supported on wall,beam and column in floors, roofs, landings, balconies, canopies and in shelves and similar work complete all as specified and directed. Note - Reinforcement and form work shall be measured and paid separately.

Mild Steel TMT bar 8mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick or concrete surface of wall and finished even and smooth with out using extra cement complete all as specified and directed.

M&L for rendering 5mm thick in cement mortar 1:4 on fair faces of brick or concrete surface of ceiling finished even and fair complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75 mm bore of pipe etc complete all as specified and directed.

S&F PVC (SWR) bends any radius of 75 mm bore with out access door complete all as specified and directed.

M & L PVC(SWR) floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) of outlet 75 mm dia complete all as specified and directed.

M&L for SGSW gully trap 150 x 150 mm square or round mouthed type 'P' complete all as specified and directed.

S&F GI tubes medium grade (ISI marked) with all fittings fixed to walls and ceilings or laid in floors of 15 mm bore of pipe complete all as specified and directed.

S&F GI tubes medium grade (ISI marked) with all fittings fixed to walls and ceilings or laid in floors of 20 mm bore of pipe complete all as specified and directed.

S&F stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions for 15 mm bore dia of pipe complete all as specified and directed.

S&F for 15mm bore dia of pipe pillar taps cast copper alloy, with capstan head chromium plated screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F ball valves for 20 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

M&L for Vitreous China urinals, bowl type flat back size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement etc complete all as specified and directed.

M&L for vitreous china wash basin, white,flat back, size 550 x 400 mm with brackets, including PVC (HDPE) 32 mm bore waste pipe, brass couplings 32 mm CP etc complete all as specified and directed.

S & F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litre capacity hoisted and fixed in position complete all as specified and directed

S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to 20mm dia GI tube complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, 75mm thick in plinth protection laid in panels and finished even and fair including necessary form work complete all as specified and directed. Note : Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in quoted rate for concrete in plinth protection.

M&L 25 mm thick PCC 1:2:4, type B-0 using 12.50mm graded crushed aggregates as in floor surface complete all as specified and directed.

M&L for non skid joint free ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.

M&L for glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.

S & F for solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2010 Part-II complete all as specified and directed

S&F Factory made solid PVC Moulded door shutter, 28 to 30 mm thick (stiles) with 2, 4, or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face and 2 mm plain colour PVC sheet on back face,with particle board core supplying and fixing in the frame as shown on drawing in section 8 of SSR-2010 Part-II complete all as specified and directed

S&F 100mm size butt hinges medium weight (ISI Marked), rolled mild steel complete all as specified and directed

S&F 150mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified and directed

S&F 150mm size Aluminium anodized barrel Tower bolts of extruded section and fixed complete all as specified and directed

M&L for preparation of new treated surfaces and apply three coat of white wash to walls complete all as specified and directed.

M&L for preparation of new treated surfaces and apply three coat of white wash to ceiling complete all as specified and directed.

M & L for two coats of cement based paint on new plastered surface of walls including preparation of surface complete all as specified and directed.

G.KRISHNA MURTHY AND PARTNERS

c p engineering works

MM ENGINEERING SYSTEMS

M/s Bapujee Builders and Traders

M/S K MURALIDHARA PATRA

Likitha Enterprises