Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
Tender Value
₹82,000
EMD Value
₹1,650
Closing Date
25 Nov 2022, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Executive Engineer PHE(Jal Shakti) Ground Water Division Nowshera Srg
Supply installation testing and commissioning of Submersible Pumping equipment with Allied Accessories at Fire and Emergency Station Sallar in Disrtict Anantnag
2022_PHE_194868_3
E-NIT No. PHE/GWDS 24 of 11/2022, PHE/GWDS/4059-66
Open Tender
Drilling Works
Item Rate
21 days
Anantnag
Please refer Tender documents.
2 documents required · 2 mandatory
₹100
Executive Engineer PHE Ground Water Dvision Srg
₹1,650
30 Nov 2022
5 Nov 2022
26 Nov 2022
5 Nov 2022
25 Nov 2022
5 Nov 2022
Amount
Providing, Fitting and Commissioning of single phase submersible type pumping unit along with allied jobs. The complete details of the job are as under:` Providing, fitting and testing of single phase pumping equipment with following specifications: Discharge = 600 GPH Head = 60 m Speed = 2900 rpm Material of the impeller= Stainless Steel Motor Rating = Suitable for above ratings Make = Reputed make(ISI MARK) The pump motor should be suitable for operation on voltage and frequency confirming to IS: 585-1962 read with upto date amendments and motor starter suitable for motor rating confirming to IS/IEC 60947-4-1 Codes. The pumping motor unit should be coupled together with steel coupling. The job includes P/F of MU-G Starter suitable for motor rating & as decided by the site Engineer. The job also includes lowering of pumping unit in the well then proper testing and commissioning of pumping unit on full load at site and providing of Characteristic Curve of pumping equipment is compulsory.
Providing, fitting and lowering of 32 mm Dia GI Column pipes (B Class) of reputed make (ISI mark) confirming to relevant IS Codes. Each Pipe is to be properly threaded at both the ends and the length of each pipe should not exceed 3 Meters (10 feet). The job includes providing and fitting of GI Sockets for jointing purpose of the pipes. All the tools & tackles including Chain pulley block, Tripod stand, carriage, skilled welder/Labours, helper, allied items required for the execution of the complete job are to be arranged by the firm. (The quantity of column pipes shall depend on the drilling depth and DWL of the well)
Providing and fitting of 3 KVA single phase automatic voltage stabilizer (Dry type)
Providing and Fitting of multi-stranded copper cable, PVC insulated, internal intermediate sheathed of 2.5 mm Sq. 3 core Submersible cable conforming to IS: 694 (Part 1st) – 1964 & IS: 694 (Part 2nd) – 1964 of reputed make(ISI marked) for submersible pumping equipment & for inter connections of electrical gadgets. (Quantity of the cable depends upon the position of submersible motor installed below ground level.)
Providing and Fitting of 5mm steel wire rope for holding/anchoring of pumping unit.
P/F of 40mm dia MS holding clamps fabricated out of 10mm thick MS plate with nuts and bolts. The job also includes p/f of Well Cap Cover suitable for 125mm dia MS Casing with proper slots for cable and pipe with nuts and bolts as per site requirement
Providing, fitting and lowering testing & commissioning of 25 mm Dia GI Column pipes (B Class) of reputed make (ISI mark) confirming to relevant IS Codes as delivery/rising main. The pipe shall be properly threaded at both ends. The pipe shall be provided & fitted with GI sockets for jointing purposes. The pipes are to be laid underground or upper ground as per site requirement.
P/F of Reducer 32mm-25mm=02 No’s.. The job also includes providing and fitting of 32mm dia GI bends =02 Nos &, 25mm dia GI bend =06 Nos.
Ahangar Industries
Escon Electricals
M/S BARKAT ELECTRICALS
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .