SITC of 62.5 KVA DG Set

Amount

Supply, delivery, installation and commissioning of 62.5 KVA, 415V, 50Hz, 3Ø silent new DG Set, comprising of Engine, alternator, separate AMF panel, Base frame, Fuel tank, Battery, CPCB-II approved Engin & Acoustic Enclosure including transportation, loading and unloading of the DG set, having following specifications : [Make: JAKSON / KOEL GREEN / ASHOK LEYLAND / Greaves Power].

ENGINE :

Make : CUMMINS / KIRLOSKAR / ASHOK LEYLAND / Greaves Power.

Engine Type : 4 or 6 Stroke Diesel Engine.

Rated Output : 80 BHP or Higher.

Duty : PRIME.

Cooling : Water cooled with radiator.

Cylinder : 4

Aspiration : Turbo Charged.

Type of Governer : Electronic.

Fuel Tank Capacity : Minimum capacity 90 Ltrs.

Fuel Consumption at 75% rated Load with Radiator or Fan : 11.53 Ltr./ Hr. or Less.

Fuel Consumption at 100% rated Load with Radiator or Fan : 15.31 Ltr. / Hr. or Less.

Overload Capacity : 10% overload for one hour for every 12 hours continious running at full load or better.

Engine instrument Panel : Consisting of starting switch with Key, Lube Oil Indicator, water temperature Indicator, RPM indicator and hour meter.

Safety Controls : Emergency Stop, Low Lube Oil Pressure warning/ Shutdown, High Engine Water Temp. warning/ Shutdown, Sensor failure Indicator, Engine overspeed indicator, Battery charging and low battery indicator.

Exhaust Silencer : Residential Type.

Starting system : 12V / 24V starting system complete with starter motor, charging alternator with rectifier and Cutout as per manufacturer standard.

Battery : Lead Acid, Low Maintenance or SMF and conforming to relevant IS Specification with Low/High Battery Voltage and Weak Battery warning.

ALTERNATOR :

Make : STAMFORD / KIRLOSKAR GREEN / LEROY SOMER / LEY POWER / Greaves Power.

Rating : 415 V, 3Ph. 50 Hz., 62.5 KVA, 1500 rpm

Type : Brushless, self excited and self regulated.

Insulation : Class H.

Protection : Screen-protected drip proof with Min. IP-23 degree of protection.

Voltage Regulation (max) : ±1%

Winding connection : Star with Neutral.

Total Distortion factor : Less than 3%

Total Harmonic distortion in output waveform : < 5%

AMF & DG PANEL :

Manufacturer's make cubical type floor mounted AMF panel and DG panel made from 16 SWG Sheet Steel, duly pretreated, powder coated painted and aesthetically finished, suitable for controlling of 62.5 KVA DG set including multi-core control cable and other accessories as required having following secification / features.

i) 125A, MCCB with O/L, S/C, E/F protection and microprocessor based protection release , U/V release etc. - 2 Sets (Make: L & T / Siemens / Legrand).

ii) In Built By-Pass switch for rated capacity

iii) On -delay timer for load change over

iv) On-delay timer for engine shut off

v) Engine On-Off switch (Push button type)

vii) Minimum five number indicating lamps to indicate 'mains ON', 'load on mains', Set running', 'load on set' and 'battery charger on'.

viii) Audio visual alarm for 'Low lubricating oil pressure', 'High water temperature, Start failure', and DG over load'.

x) Microprocessor based relay with composite meter for digital display of following.

Generator voltage/AC Mains voltage.

Generator Current in all phases

Frequency

Power Factor

Energy

Indication for alternator supply

Running time indications number of hours of operation and service intervals, service due indications.

The AMF panel must be designed to ensure trouble free performance and ensure switching over Electrical Load to DG within 15 (fifteen) second from the instant of mains failure.

ACOUSTIC ENCLOSURE : -

The DG set should have integrated acoustic enclosure at the manufacturing state itself. High quality acoustict enclosure must be certified as per CPCB-II norms.

BASE FRAME :

Common iron channel fabricated base frame containing the engine and alternator, mounted on AVM pads and having provision for lifting Hook.

Making 3100mm x 1800mm x 1000mm (250mm below & 750mm above the ground level) PCC foundation 300 mm PCC block on top (Ratio 1:2:4), 150 mm RCC block in middle & soiling compound in remaining 3 mm thick smooth cement finish including construction of blue scope roofing shade supported onsteel stuucture consisting of atleast 4(four) vertical supports and adequate horizontal support made up of iron pipes with water prof painting on primer, capable of providing protection against rain for the DG having dimension 2950mm x 1200mm x 1800mm(height).

S & F of exhaust gas pipe line of suitable dia welded black 100 mm dia MS class B pipe incl. all necessary bend supports and clamps, anti vibration mounting system with insulation of exhaust system with 50mm thick mineral wool cover with wire mesh and aluminium cladding ( from DG sets to top of the building plus 3mtr or as per CPCB) for 62.5 KVA DG set as per direction of EIC.

Supply & delivery 1.1 KV grade PVC/A. XLPE insulated aluminium armoured cable. (Make: Havells / Polycab / KEI / Gloster / Mescab).

(a) 4 core 50 sqmm

Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed for (a) 4 core 50 Sqmm.

Laying of cable as below, after cutting floor / pavement / wall and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish.

(i) 4 Core 50 Sqmm.

S & F medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required. (for road crossing of cable) (a) 50 mm dia.

S & F compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :

(a) 4 core 50 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. S & F solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

(a) 4 core 50 sqmm

Earthing with 65 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 x 19/10 stranded GI (Hot Dip) wire (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including socketing at both ends of stranded GI (Hot Dip) wire by crimping sockets/ thimbles and S & F 40 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts. [2 nos for nutral earthing and 2 nos for body earthing].

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments ncl. drilling holes, with bolts, nuts, washers etc.

S & F 415V, TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc. (Make: L & T).

S & F 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make: L & T).

S & F 4 Bar, 200 Amp 415V, 0.5 mtr. Length copper bus bar chamber on angle iron frame on wall incl. earthing attachment & painting )as per drawing No. 470 of PWD specification book - May 1991) as to G.S.

TERMS & CONDITIONS

(i) Rate should be inclusive of all taxes, duties & CESS etc including GST.

(ii) All materials, equipments & accessories must conform to relavent IS / IEC specifications. The DG Set to be supplied must be from the authorized OEM of the respective Engine Manufacturer / Authorised Dealer / Bonafide Outsider, resourceful Electrical Contractors.

(iii) Nacessary manufacturer's test certificate for Desiel Engin, Alternator etc. Will have to submit in triplicate copy during delivery of the equipment.

(iv) Copy of "Type Approval Certificate" and Certificate of "COP" must be produced at the time of delivery issued from competant Authority (As per CPCB-II).

(v) Circuit Diagram for AMF Panel must be submited from the Manufacturer / OEM.

(vi) The entire set must be warranted at least 5 (five) years from the date Commissioning incl. breakdown and preventive maintenance including of all consumables which will have to be provided by the bidder.

(vii) During commissioning, the DG set has to be made to run for atleast six hours at a stretch on atleast 75% load at the cost (cost of fuel, operator and technical personnel) of the agency entrusted with the work and the agency will have to provide permanently multi-core control cables as required with allied accessories including laying of the same before commissioning of the DG set.

M/S EASTERN ENGINEERING

GHANASHYAM ELECTRIC STORES

M/S. A.D.ELECTRICAL ENTERPRISE