Varaganadhi HLB

Amount

Earth work excavation in all classes of soil except hard rock requiring blasting and depositing on bank as per SS20B with all leads and lifts and all other incidental charges such as bailing out water shoring strutting, walling and forming protective bunds whereever necessary etc., complete as per relevent standard specification for DRESSING THE BED UPTO SILL LEVEL

a) Main Estimate - 100 Cum b) FORMATION OF APPROACH ROAD - 2203 Cum

Earthwork excavation in all classes of soil except hardrock requiring blasting and depositing on bank with all leads and lifts as per SS20B, including cost of all labour, equipments and all incidential charges such as baling our water, providing and maintaining necessary cofferdams, sheeting, shoring bracing and their subsequent removal, removal of all logs, stumps, grubs and other deleterious matter and obstructions, trimming bottom of excavation backfilling, and clearing the site and disposal of all surplus materials etc., complete as per relevant standard specification for FOUNDATION ABUTMENTS AND PIERS as per section 300 of MORTH specification (V Revision) and Is 1200:1992 Part 1 (IV Revision)

a) Main Estimate - 945 Cum b) Retaining wall - 832 Cum

Earthwork excavation in hard rock requiring blasting and depositing on bank with all leads and lifts as per SS20B, including cost of all labour, equipments and all incidential charges such as baling our water, providing and maintaining necessary cofferdams, sheeting, shoring bracing and their subsequent removal, removal of all logs, stumps, grubs and other deleterious matter and obstructions, trimming bottom of excavation backfilling, and clearing the site and disposal of all surplus materials etc., complete as per relevant standard specification for FOUNDATION UNDER ABUTMENTS AND PIERS as per section 300 of MORTH specification (V Revision)

Benching hard rock up to an average 10cm depth, cleaning of any loose materials and levelling with a layer of concrete of same grade as that of the foundation to be provide an even surface, including labour etc., complete as per relevant standard specification.

Providing HYSD Dowel bars of 25 mm dia of Fe-500 including cost and conveyance of all materials to site drilling 40mm holes in rock and grouting the same with cm 1:2 mixed with anti shrinkage compound after placing the 25mm dowel bars etc.,

Plain Cement Concrete of Nominal Mix, 1:2:4 using 40mm ISS HBG metal including cost and conveyance of all materials to site including cement at site including cost of formwork, soft water, labour charges for mixing, transporting, laying and curing concrete, working at depths, Tools and Plants and incidental charges such as maintaining of protective bunds, cofferdams, shoring, strutting etc; complete as per relevant standard specification, etc, complete as per relevant standard specification for LEVELLING COURSE BELOW FOUNDATION UNDER ABUTMENTS, WINGS AND PIERS as per section 1100 of MORT@H specifications (V Revisions)

Vibrated Reinforced Cement Concrete M35 (Design mix), using 20mm ISS HBG Graded metal as the max. size of coarse aggregate, including cost and conveyance of all materials to site and cost of cement at site, but excluding cost and fabrication of steel, but including cost of form work, soft water,labour charges for mixing, transporting, laying, curing concrete working at depths, hire charges for tools and plants, including all other incidental charges, etc., complete as per section 1100,1500&1700 of MORT&H specification (V Rivision) FOUNDATION UNDER ABUTMENTS, RETURN WALLS AND PIERS.

Cement Concrete of M-15, Nominal Mix, 1:2:4 using 40mm ISS HBG metal including cost and conveyance of all materials to site including cement at site including cost of formwork, soft water, labour charges for mixing, transporting, laying and curing concrete, working at depths, Tools and Plants and incidental charges such as maintaining of protective bunds, cofferdams, shoring, strutting etc; complete as per relevant standard specification, etc, complete as per relevant standard specification filling the trenches around and upto the top of footing as per cl.707.4.6 of IRC:78-2014

Vibrated Cement Concrete of grade M35 Design Mix using 20mm ISS size HBG metal including cost and conveyance of all materials to site including cost of cement at site including cost of formwork, soft water, labour charges for mixing, transporting, laying and curing concrete , working at depths , tools and plants and maintaining of protective bunds, cofferdams, shoring, strutting etc., complete as per section 1500,1700 & 2200 of MORT&H Specification(V Revision) for SUB STRUCTURE - ABUTMENT and Returns (Below sill).

Vibrated Cement Concrete of grade M35 Design Mix using 20mm ISS size HBG metal including cost and conveyance of all materials to site including cost of cement at site including cost of formwork, soft water, labour charges for mixing, transporting, laying and curing concrete , working at depths , tools and plants and maintaining of protective bunds, cofferdams, shoring, strutting etc., complete as per section 1500,1700 & 2200 of MORT&H Specification(V Revision) for SUB STRUCTURE - ABUTMENT and Returns (Above sill).

Providing and fixing CLASS I PVC seepage pipes of 100mm dia of requied lengths for abutments and wngs including cost and conveyance of all materials to work site and for labour charges for fixing, etc.,to drain of the backfill as per section 2706 of MORT@H specifications (V Revisions)

a) Main Estimate - 62 Rm b) Retaining wall - 84 Rm

Vibrated reinforced cement concrete M-35 Grade, Design Mix, using 20mm ISS size hard granite broken graded metal including cost and conveyance of all materials to site and cement at site excluding cost and fabrication of steel but including form work and centering soft water labour charges for mixing, transporting, placing in position, vibrating and compacting finishing and curing concrete, working at heights, hire charges for tools and plants, including all other incidental charges, etc., complete as per section 1500 ,1700 and 2200 of MORT@H specifications (V Revision) for BED BLOCK CUM DIRT WALL OVER ABUTMENTS.

Vibrated Cement Concrete of grade M35 Design Mix using 20mm ISS size HBG metal including cost and conveyance of all materials to site including cost of cement at site including cost of formwork, soft water, labour charges for mixing, transporting, laying and curing concrete , working at depths , tools and plants and maintaining of protective bunds, cofferdams, shoring, strutting etc., complete for COLUMN PIER as per section 1500,1700 & 2200 of MORT&H Specification(V Revision) BELOW SILL LEVEL.

Vibrated Cement Concrete of grade M35 Design Mix using 20mm ISS size HBG metal including cost and conveyance of all materials to site including cost of cement at site including cost of formwork, soft water, labour charges for mixing, transporting, laying and curing concrete , working at depths , tools and plants and maintaining of protective bunds, cofferdams, shoring, strutting etc., complete for COLUMN PIER as per section 1500,1700 & 2200 of MORT&H Specification(V Revision) ABOVE SILL LEVEL.

Vibrated reinforced cement concrete M35 (Design mix) using 20mm ISS size hard granite broken graded metal including cost and conveyance of all materials to site and cement at site excluding cost and fabrication of steel but including form work and centering soft water labour charges for mixing, transporting, placing in position, vibrating and compacting finishing and curing concrete, working at heights, hire charges for tools and plants, including all other incidental charges, etc., complete as per section 1500 ,1700 and 2200 of MORT@H specifications (V Revisions) for CAPPING BEAM OVER PIER COLUMNS.

Vibrated reinforced cement concrete M-35 Grade, Design Mix, using 20 mm ISS size hard granite broken graded metal including cost and conveyance of all materials to site and cement at site excluding cost and fabrication of steel but including form work and centering soft water labour charges for mixing, transporting, placing in position, vibrating and compacting finishing and curing concrete, working at heights, hire charges for tools and plants, including all other incidental charges, etc., complete as per standard specifications for PEDESTAL OVER ABUTMENTS AND PIERS as per section 1500 ,1700 and 2200 of MORT@H specifications (V Revisions)

Supply and fixing of Elastomeric bearing of size 50 x 30 x 8 cm including cost and conveyance to work site, labour for fixing the same in correct position and all other incidental charges etc., complete as per standard specifications as per section 2000 MORT@H specifications (V Revisions) and IRC :83-2015(part II)

Vibrated reinforced cement concrete M-35, Grade, Design Mix using 20mm ISS size hard granite broken graded metal including cost and conveyance of all materials to site and cement at site but excluding cost and fabrication of steel but including form work and centering soft water labour charges for mixing, transporting, placing in position, vibrating and compacting finishing and curing concrete, working at heights, hire charges for tools and plants, including all other incidental charges, etc., complete as per standard specifications for T-BEAM AND CROSS GIRDERS as per section 1500 ,1700 and 2300 of MORT@H specifications (V Revisions)

Vibrated reinforced cement concrete M-35, Grade, Design Mix using 20mm ISS size hard granite broken graded metal including cost and conveyance of all materials to site and cement at site but excluding cost and fabrication of steel but including form work and centering soft water labour charges for mixing, transporting, placing in position, vibrating and compacting finishing and curing concrete, working at heights, hire charges for tools and plants, including all other incidental charges,including inspection chamber, inclusive of 150mm ducts and other accessories of footpath etc., complete as per section 1500 ,1700 and 2300 of MORT@H specifications (V Revisions) for DECK SLAB,Kerb and Footpath.

Providing and fixing of Galvinised Iron drainage spouts 100mm dia as per MOST drawing SD/205 with grating arrangements at top as shown in the drawing using 12mm x 25mm flats for grating arrangements, and 100mm dia drainage spout projecting beyond the bottom of deck slab as shown in the drawing including cost and conveyance of cast iron pipes and flats and fixing them in position etc,complete.as per section 2705 of MORT@H specifications (V Revisions).

Supplying and installation of STRIP SEAL EXPANSION joint system of 40mm wide expansion gap provided in between decks over piers and in between deck and dirt wall over abutment with fatigue tested structural steel section at the nosing and anchorage assembly, including cost and conveyance of all materials, cost of testing as per the MOST specifications, including labour, equipment and incidental charges for fixing the joints complete in all respects as per section 2600 of MORT@H specifications (V Revisions)

Providing FILTER MEDIA behind the abutments and wings for 600mm thickness using filter material conforming to clause 309.3.2.B of MORT&H well packed with smaller sized towards the soil and bigger size towards the wall including cost and conveyance to work site including all labours and other incidental charges, etc complete.as per CI. 710.1.4 and appendix -6 of IRC : 78-2014

a) Main Estimate - 132 Cum b) Retaining wall - 69 Cum

FILLING BEHIND ABUTMENTS AND RETURNS with clean gritty free drainig gravel including cost and draining gravel having PHI value more than 35 conveyance of gravel to worksite, laying, handling charges and filling in layers, tamping under optimum moisture content to get the maximum density including watering, with all leads for water and all other incidental charges etc,complete as per CI. 710.1.4 and appendix -6 of IRC : 78-2014

Vibrated Cement Concrete Nominal Mix, 1:2:4 using 40mm ISS hard granite broken metal including cost and conveyance of all materials to site and cement at site including cost of formwork,lead for soft water, labour charges for mixing , transporting, laying, and curing concrete working in heights and hire charges for tools and plants, and all other incidental charges etc complete as per section 1500,1700 and 2704 of MORT@H specifications (V Revision) for BASE COURSE Below Approach slab and foot path ramp.

Vibrated Reinforced Cement Concrete M-30, Grade, Design Mix, using ISS graded hard granite broken metal including cost and conveyance of all materials to site including cement at site including labour charges for mixing, laying, curing concrete, working at heights,hire charges for tools and plants, including all other incidental chages etc., complete for APPROACH SLABS as per section 1500,1700 and 2704 of MORT@H specifications (V Revisions)

Vibrated Cement Concrete M-30, Grade, Design Mix, 75 mm thick using 25mm, 12mm and of 6mm ISS size HBG graded metal including cost and conveyance of all materials to worksite and cement at site including all labour charges for fixing concrete, laying, vibrating, hire charges for tools and plants, compacting, curing with all leads for soft water, including all other incidental charges,formwork,cost of premoulded expansion joints and fixing the same in position etc., complete for wearing coat over deck slab and approach slab as per section 2702.2 of MORT@H specifications (V Revisions)

Vibrated reinforced Concrete M-30, Grade, Design Mix, using 20mm ISS size hard granite broken graded metal including cost and conveyance of all materials to site including cement at site including labour charges for mixing, transporting, laying, and curing concrete,working at heights,hire charges for tools and plants,including all other incidental charges,etc, complete for HAND RAILS AND POSTS as per section 2703-3 of MORT@H specifications (V Revisions) and as per MOST drawing no SD/202

Vibrated reinforced Concrete M-40, Grade, Design Mix, using 20mm ISS size hard granite broken graded metal including cost and conveyance of all materials to site including cement at site including labour charges for mixing, transporting, laying, and curing concrete,working at heights,hire charges for tools and plants,including all other incidental charges,etc, complete for CRASH BARRIER as per section 811,1700 and 2703.3 of MORT@H specifications (V Revisions)

Vibrated Cement Concrete Nominal Mix 1:2:4 , using 40mm ISS size hard granite broken metal including cost and conveyance of all materials to site and cement at sitel including labour charges for mixing,transporting, laying, and curing concrete,working at heights,hire charges for tools and plants, including all other incidental rges,etc.,complete as per standard specification for PARAPET as per section 1500,and 1700 of MORT@H specifications (V Revisions).

Supply and fabrication of Fe-500D steel required for all RCC items of works involved in the schedule, including cost of steel at site and cost of fabrication labour charges forcleaning the rods straightening,cutting,bending,tying grills, including over laping to the required length wherever necessary and providing to the reinforcement placing the reinforcement in position as specified in the drawings including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges , etc., completeas per section 1600 of MORT&H Specifications (V Revision). Upto 16mm dia.

a) Main Estimate - 152 MT b) Retaining wall - 22 MT

Supply and fabrication of Fe-240 steel required in the schedule icluding cost of steel at site cost of providing and cost of fabrication, labour charges for cleaning therods, Straightening, cutting, bending, tying grills including over lapping to the requiredf length wherever necessary and providing to the reinforcement, placing the reinforcement in position as specified in the drawings including cost of binding wire provision of spacer bars,cover blocks and all other incidental charges etc complete as per section 1600 of MORTH specification( V Revision)

Supply and fixing of High Quality of utility PVC pipes of 150mm dia.. Including cost and conveyance of pipes to the site and fixing in position to proper grade and level, including labour charges for fixing and including all other incidental charges etc complete., for proving utility services in footpaths

Filling with Carted earth for forming embankment including conveyance of earth to site, spreading the earth uniformly to the entire embankment formation in layers of not exceeding 250 mm thick as directed by the department officers including compacting each layer to the required density in accordance with IS 2720 part VII at 97% Proctor density upto sub grade level and shoulders keeping the moisture content of earth at the time of compaction within the range of 1% above and 2% below the OMC determined and plasticity index value of not more than 20 and liquid limit not greater than 40 in accordance with IS 2720 using required capacity rollers to achieve the required density in each layer including watering with all leads for water and finishing the surface to the lines and grades ,sections as directed by the departmental officers and including hire charges and running charges for the roller and all other tools and plants employed

95 % Compaction

97 % Compaction

Construction of Granular Sub Base by providing close graded materials IRC size HGB metal mixing in mechanical mix plant at OMC carrying the mix to the work site spreading in uniform layers with motor grader on prepared surface and compacting with vibratory roller to achieve the desired density complete as per clause 401 of MORT&H Rev-5 for grading V for Top layer

Providing and laying ,spreading and compacting graded stone aggregate to Wet Mix Macadam 250mm thick specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub base/Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of materia labour charges ,rentals for machinary,fuel and all other incidental charges etc complete as per Clause 406 of MORTH Rev-5.

Providing and laying of Prime coat over WMM surface using 7.00 Kg Bitumen Emulsion (SSI) per 10 Sqm for preparatory to to another bituminous construction over it including cost of material ,labour charges,rentals for machinary,fuel and all other incidental charges etc complete as per Clause 502 of MORTH Rev-5.

Providing and laying of Tack coat over WMM surface (treated with primer) using 2.50 Kg Bitumen Emulsion (RSI) per 10 Sqm for preparatory to to another bituminous construction over it including cost of material ,labour charges,rentals for machinary,fuel and all other incidental charges etc complete as per Clause 503 of MORTH Rev-5

Providing and laying 80mm consolidated thick Dense Bituminous macadam using 0.40 cum for 37.50-13.20mm, 0.35 cum of 13.20-2.36mm and 0.36 cum of 2.36mm & below size IRC metal with 71.30 kgs of VG30/ VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 75mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, Paver Finisher / 9m paver finisher, Vibratory / Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 505 of MORTH rev-5.

Providing and laying Bituminous Concrete 30mm thick using 0.13cum of 19-9.50mm, 0.17cum of 9.50-2.36mm and 0.26cum of 2.36mm & below with 50.30Kgs of VG 30bitumen for premixing per 10 sqm including cost andconveyance of all materials to CMP site,heating the bitumen and aggregate to required temperature and mixing them in required temperature in Central Hot Mix plant 20-30 ton capacity,conveying the mix by tipper trucks to work site spreading the mix to uniform thickness of 50mm with paver to the required density etc including labour for attending to paver at site etc including hire charges and fuel charges for 20-30 ton CMP with bitumen boiler tipper trucks,paver finisher/9m paver finisher,Vibratory/Pneumatic rollers and all other tools and plants required,including fuel and all other incidental chargesetc complete as per Specification using CMP as per Clause 507 MORTH Rev-5.

Plain Cement concrete ( Nominal mix1:3:6 ) using 40mm ISS HBG graded metal including cost and conveyance of all materials to site and cost of cement at site including soft water, labour charges for mixing, transporting, laying compacting, curing concrete,Tools and Plants and incidential charges etc., complete as per relevant standard specification, for LEVELLING COURSE BELOW FOUNDATION OF RETAINING WALLS

Vibrated Reinforced Cement Concrete of grade M 35 (Design mix) using 20 mm ISS HBG graded metal including cost and conveyance of all materials and cost of cement to site but excluding cost and fabrication of steel but including soft water, labour charges for mixing, transporting, laying and curing concrete, working at depths hire charges for Tools and Plants including all other incidental charges, etc. complete, for FOUNDATION OF RETAINING WALL

Vibrated Reinforced Cement Concrete of grade M 35 (Design mix) using 20 mm ISS HBG graded metal including cost and conveyance of all materials and cost of cement to site but excluding cost and fabrication of steel but including soft water, labour charges for mixing, transporting, laying and curing concrete, working at depths hire charges for Tools and Plants including all other incidental charges, etc. complete, for stem of RETAINING WALL (below ground level)

Vibrated Reinforced Cement Concrete of grade M 35 (Design mix) using 20 mm ISS graded metal including cost and conveyance of all materials and cost of cement to site but excluding cost and fabrication of steel but including soft water, labour charges for mixing, transporting, laying and curing concrete, working at depths hire charges for Tools and Plants including all other incidental charges, etc. complete, for RETAINING WALL (above ground level)

Vibrated Reinforced Cement Concrete M40 (Design mix) using 20 mm ISS HBG graded metal, including cost and conveyance of all materials to site and cost of cement at site, but excluding cost and fabrication of steel but including cost of form work, labour charges for mixing ,transporting, laying, curing concrete, working at heights, soft water, hire charges for Tools and Plants, including all other incidental charges, etc., complete for CRASH BARRIER

Earthwork excavation in all classes of soil except hardrock requiring blasting and depositing on bank with all leads and lifts as per SS20B, including cost of all labour, equipments and all incidential charges such as baling our water, providing and maintaining necessary cofferdams, sheeting, shoring bracing and their subsequent removal, removal of all logs, stumps, grubs and other deleterious matter and obstructions, trimming bottom of excavation backfilling, and clearing the site and disposal of all surplus materials etc., complete as per relevant standard specification for FOUNDATION OF TOE WALL REVETMENT.

Vibrated Cement Concrete M15 grade, Nominal Mix 1:2:4 using 40mm ISS size hard granite broken metal including cost and conveyance of all materials to site and cement at sitel including labour charges for mixing,transporting, laying, and curing concrete,working at heights,hire charges for tools and plants, including all other incidental charges,etc.,complete as per standard specification for FOOTINGS AND TOE WALLS.

Gravel backing to revetment for 150mm thick, including cost and conveyance of gravel to worksite,laying, and filling in layers, of 150mm thick, tamping, including watering with all leads for water and all other incidental charges etc, complete.

Manufacturing and fixing cement concrete blocks of size 250 x 250x 300 mm in CC 1:2:4, nominal mix (M15) using 20mm ISS size HBG metal including cost and conveyance of all materials to worksite and cement site including conveyance and handling charges for the same at both ends, including all other incidental charges, etcc, complete for REVETMENTS.-1Sqm

Painting two coat with ready mixed Plastic emulsion paint and including priming coat over the cement surface complete including scrapping cleaning and removal of dirt of parts and Zebra crossing wherever necessary.

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes (Road Marking with hot applied thermoplastic compound with Reflectorising Glass beads on bituminous surface)

Providing and fixing reflective road studs of category B raised pavement markers made out of polycarbonate/ABS moulded body and reflective panels (bi-convex reflectors) with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro-reflectance and chromaticity values conforming to ASTM D4280. The reflective raised pavement markers shall also confirm to the MORTH circular No RW/NH.33023/10/97-DO.III dt.11.06.97 and the length, height and width of the body shall not be less than 100 mm, 15 mm and 90 mm and base of marker shall be flat within 1.3 mm. The marker shall support a load of 13635 kg tested in accordance with ASTM D4280. Lenses shall be moulded of polycarbonate or methyl methecrylate conforming to ASTM D788. The area of each retro-reflectory surface shall not be lesss than 13.0 sq.cm. The slope of retro-reflectory surface shall be 35+5 degree to base. Each reflector shall have a CIL not less than values specified in table 2 of said MORTH circular and two cylindrical Polymer shanks of not less than 20 mm diameter and not less than 30 mm length shall be provided for better anchorage 3.5m spacing

Supply and fixing of delineators with the reflector made of Matacryl resin, valuable reflection area 92 mm X 19 mm, reflection flame ABS, stay made up of specialised Extruded aluminium alloy length 320 mm and width 108 mm, Anchor bolt Anodized anchor bolt T-840, lens colour yellow, total length of ABS stay/holder width 56 mm and length 81 mm x 5 nos, No.of lenses 5 and the distance between lenses 56 mm. Each panel shall be designed to attach-adhere to and shall be compatible with concrete safety barriers/ guard rails/ existing structures and pipelines with necessary hardware/ frames. Each panel shall confirm to the retro reflectance and chromaticity limits specified in the details technical specification and as directed by the engineer

Providing and erecting direction and palce identification retro-refelectorised sign as per IRC: 67 - 2010 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick fixed on back supporting frame and supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing (Sign board made of Retro Reflective Type IV sheeting, ASTM D4956 specification - More than 0.90 sq.m)

Providing and fixing of retro reflectory Cautionary, Mandatory and informatory signs made of high intensity prismatic Grade sheeting confirming to IRC 67-2010 and ASTM D 4956-09, Type IV Specification and fixed over 1.5 mm thick aluminium sheet fixed on back supporting frame of 25 mm x 25 mm x 3 mm Mild steel angle and supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level etc complete including 7 year warranty for the retro reflective sheeting as per clause 6.9 of IRC 67: 2010 specification (as per MORTH Specification No 801)

90cm equilateral triangle with definition board

60cm circular board with definition board

60cm x 45cm rectangular board with definition board

Providing and fixing of retro reflectorised Hazard Marker Traffic Sign made out of high intensity prismatic Grade sheeting confirming to IRC 67-2012 and ASTM D 4956-09, Type IV Specification and fixed over 2 mm thick aluminium sheet fixed on back supporting frame of 25 mm x 25 mm x 3 mm Mild steel angle and supported on a mild steel single angle iron post 75 x 75 x 6 mm and 0.6m below ground level. The sign post should be painted as per IRC 67-2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge.High intensity Retro-Reflectro sheet shall consist of minimum coefficient of Retro- reflection as per table 6.6 of IRC 67-2012. The Retro - Reflective sheeting shall be covered under 7 year warranty issued for field performance and certified copy of three years outdoor exposure report shall be obtained as per IRC 67: 2012 specification (as per MORTH Specification No 801)

Providing and erecting single sided double metal beam crash barrier system 1.80m high comprising of 3mm thick wall "W" beams posts and spacer channels shall be made by cold roll forming using HR conform to IS 5986 Fe 410/360 and dip galvanized having zinc mass of 550gms/ sqm, minimum 95mm above road/ ground level fixed on ISMC series channel vertical post 150X75X5mm spaced 2m center to center 312mmX 83MM flange width X3mm thick 4318mm long post directly embedded in the concrete (M15) pit size 350X350X800mm for a depth of 750mm below ground. All fixing bolts and nuts hot dip galvanized comforming to IS:1367 clause 4.60 all complete as per technical specification and as directed by the Engineer In charge. For Metal Beam Crash Barrier Type -A "W" Double Guard.

Dismantling the the existing Random Rubble Masonry in Cement Mortar in the existing causeway / bridge and reused on the river training work as directed by the departmental officers including all labour and incidental charges etc., complete.

Dismantling the existing Reinforced Cement Concrete in the existing causeway and reuse on the river training work or road side as directed by the departmental officers including all labour and incidental charges etc., complete.

Calculation of SubTotal, GST and Total carried out by system automatically

Sub Total Amount for above all items

GST 12% for the above SubTotal Amount

M/s.KRMS CONSTRUCTIONS