Construction of residential colony for employees of Public Works Department at Nabha Estate Shimla(S Construction of 8 Nos Type-IV quarters and 4 Nos Type-V quarters at site Block No.34 Civil work including WS and SI rain water harvesting tank etc.).

Amount

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains in earth work in all heights and depth in all kinds of soils, including saturated soil comprising of pick work, jumper work, and blasting work both in soft and hard rock with chiselling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and as directed by the Engineer -in-Charge at site and sorting out useful and un- useful material and transportation of the un -useful material for disposing at approved dumping site or otherwise and including payment of prescribed charges of dumping to the owner of dumping site (to be arranged by the contractor) for the satisfaction of Engineer- in -Charge through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and other incidentals necessary to complete the work by mechanical means and labour (if required) including disposal of all surplus excavated earth at approved dumping site including all leads and lifts.

Earth work in excavation for all type of road structures such as retaining walls, breast walls, culverts, drains and parapets ectetra in all type of classification of soil comprising of ordinary soil, soft/ hard rocks, chiselling / wedging out of rocks (where blasting is prohibited) as per drawing and MORD technical specifications Clause 305.1, 1104 and 1606.1 and as per direction of the Engineer-in-Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal of materials upto all leads and lifts including dressing of sides and bottom and back filling in trenches with excavated suitable approved materials to the original surface in layers No.t exceeding 150mm (One Hundred Fifty milimetres) compacted thickness including shorting and strutting and pumping and bailing out water (surface and sub soil water) upto all depth and any quantum of water including cleaning of slush which may arise out during dewatering as per the direction of Engineer-In-Charge including of carriage of materials with in all leads and lifts.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including of carriage of materials with in all leads and lifts as directed by the Engineer-in-charge.

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 sand: 4 graded stone aggregate 20 mm No.minal size) mechanicallly mixed and vibrated excluding the cost of centering and shuttering complete- All work up to plinth level including of carriage of materials with in all leads and lifts as directed by the Engineer-in-charge.

Providing and laying cement concrete grade PCC M-10 No.minal mix 1:3:6 ( 1 cement:3sand:6 graded stone aggregate 20 mm No.minal size) mechanically mixed and vibrated including form work in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 including of carriage of materials with in all leads and lifts as directed by the Engineer-in-charge.

Providing and laying cement concrete 1:4:8 (1cement :4sand :8 graded stone aggregate 40mm No.minal size) mechanically mixed and vibrated for compacting concrete and curing complete excluding cost of centring and shuttering including of carriage of materials with in all leads and lifts as directed by the Engineer-in-charge.

Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40mm No.minal size) mechanically mixed and vibrated for compacting concrete and curing complete excluding cost of centring and shuttering including of carriage of materials with in all leads and lifts as directed by the Engineer-in-charge.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm No.minal size) over 75mm thick bed of dry brick ballast 40 mm No.minal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including of carriage of materials with in all leads and lifts as directed by the Engineer-in-charge.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30mm x 30mm x 5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling upto all floor levels. and removal of the same for insitu-reinforced concrete & plain concrete work including of carriage of materials with in all leads and lifts as directed by the Engineer-in-charge. Foundations, footings, bases of columns, etc. for mass concrete

Suspended floors, roofs, landings, balconies and access platform with water proof ply 12mm thick.

Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12mm thick.

Columns, Pillars, Piers, Abutments, Posts and Struts Circular.

In stair cases with sloping or stepped soffits excluding landings in all floor level in all heights.

Arches, domes, vaults up to 6 m span

In vertical & horizontal fins individually or forming box louvers band, facias and eaves board & vertical surface such as wall (any thickness) partition and the like including attached pilasters in all floor level in all heights.

Edges of slabs and breaks in floors and walls. Under 20 cm wide.

Reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm No.minal size) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to all floor levels, excluding cost of centering, shuttering, finishing and reinforcement including of carriage of materials with in all leads and lifts as directed by the Engineer-in-charge.

Reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm No.minal size) work In beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases above plinth level up to all floor levels, excluding the cost of centering, shuttering, finishing and reinforcement including of carriage of materials with in all leads and lifts as directed by the Engineer-in-charge.

Reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm No.minal size) work In arches, archribs, domes, vaults, shells, folded plate and roofs having slope more than 15° up to floor five level, excluding the cost of centering, shuttering including of carriage of materials with in all leads and lifts as directed by the Engineer-in-charge.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Mild steel and Medium Tensile steel bars including of carriage of materials with in all leads and lifts as directed by the Engineer-in-charge.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge including of carriage of materials with in all leads and lifts as directed by the Engineer-in-charge.

All works above plinth level upto all floor levels.

Providing and laying water proofing treatment with Dr. Fixit- FASTFLEX or equivalent with two components polymer modified cementitious coating consisting of cementitious powder and a polymer liquid in two coats for first coat:- clean and saturate surface and then applying a coat of Dr. Fixit - FASTFLEX by maintaning a coverage of 6-7 sft per kg to achive one mm thickness and the same process shalltended upto 300 mm vertically. The second coat shall be applied in opposit direction after four six-hours of application of first coat then sprinkle sand on top surface of applied Dr. Fixit-FASTFLEX while still tacky over the second coat. Then apply cement mortar 1 : 4 ( 1 cement : 4 sand) admioxed with 200ml of pidi proof LW @ 200ml per 50kg bag of cement over the floor with the suitable grediant towards drain pipe, while the second coat of Dr. Fixit is still tacky complete upto all floor levels including of carriage of materials with in all leads and lifts as directed by the Engineer-in-charge.

Brick work using common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor levesl in all shapes and sizes in :-Cement mortar 1:6 (1 cement : 6 sand) including of carriage of materials with in all leads and lifts as directed by the Engineer-in-charge.

Brick work using common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in fouindation and plinth in Cement mortar 1:6 (1 cement : 6 sand) including of carriage of materials with in all leads and lifts as directed by the Engineer-in-charge.

Half brick masonry usig common burnt clay F.P.S. (No.n modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor levels in.- Cement mortar 1:4 (1 cement :4 sand) including of carriage of materials with in all leads and lifts as directed by the Engineer-in-charge.

Stone filling behind retaining wall Including carriage of material within all leads and lifts as per direction of Engineer-in-charge as directed by the Engineer-in-charge..

Providing weepholes in brick masonry / stone masonry, plain / reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 including carriage of materials within all leads and lifts as per direction of Engineer-in-charge.

Stone soling properly hand-packed filling interstices with Kharanja stone under floor specified thickness complete as per HP.PWD specification including carriage of materials in all leads and lifts.

Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately) Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. Area of slab over 0.50 sqm including carriage of materials within all leads and lifts as per direction of Engineer-in-charge.

Providing edge moulding to granite / marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge including carriage of materials within all leads and lifts as per direction of Engineer-in-charge.

Providing and fixing 20 mm thick Granite stone of Jet black colour, gang saw cut mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts as per direction of Engineer-in-charge.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of materials within all leads and lifts as per direction of Engineer-in-charge.

Cement concrete flooring 40 mm thick in 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm No.minal size) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of No.ing of steps etc. complete including carriage of materials within all leads and lifts.

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement) including carriage of materials within all leads and lifts.

25 mm thick mirror polished Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) including carriage of materials within all leads and lifts.

20 mm thick mirror polished Kota stone slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete including carriage of materials within all leads and lifts.

Providing and laying double charged 600 mm X 600 mm vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of materials within all leads and lifts.

Providing and laying Vitrified tiles (Size of Tile 600x600 mm) (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. including carriage of materials within all leads and lifts.

Chequerred precast cement concrete tiles 22 mm thick of approved shade and colour in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) including carriage of materials within all leads and lifts.

Providing and fixing 10 mm thick full body vetrified tiles of approved size colour and make, and joints filled with approved grout materials complete as per the direction of Engineer-in- Charge including grouting the joint with white cement & matching pigments etc. complete including carriage of materials within all leads and lifts. (31.01) In flooring on a bed of 20 mm thick mortar 1:4 (1 cement : 4 sand).

In dado /skirting on 12 mm thick mortar 1:3 (1 cement : 3 sand) .

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & patternincluding carriage of materials within all leads and lifts.

Providing second class deodar wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). including carriage of materials within all leads and lifts as per direction of Engineer-in-charge.

Providing and fixing 35 mm thick second class deodar wood glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screwsincluding carriage of materials within all leads and lifts as per direction of Engineer-in-charge.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws including carriage of materials within all leads and lifts as per direction of Engineer-in-charge.

Providing and fixing 35mm thick 2nd class deodar wood wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85G with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. complete including carriage of materials within all leads and lifts as per direction of Engineer-in-charge.

Providing and fixing 19mm thick commercial board in shelves / box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of materials within all leads and lifts

Providing and fixing 19mm thick Commercial Board shutters for cup boards i/c fixing with nickel plated piaNo. hinges with screws etc complete) including carriage of materials within all leads and lifts

Providing and fixing 6mm thick commercial ply wood ceiling / lining of approved quality with butt jointing and nails (frame work and cover fillets to be paid for separately) complete including carriage of materials within all leads and lifts.

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.5 mm thick including carriage of materials within all leads and lifts.

Providing and fixing square edged cover fillets (beading) 19x6 mm section including mitring at junction with wooden screw/nails etc complete in first class teak wood loading carriage of material within all lead and lifts as per direction of engineer in charge.

Providing and fixing powder coated ACP (aluminium composite pannel) 4 mm thickness mounted on powder coated G.I. frame work fixed / hanging with wall or ceiling etc. with specified clamps and G.I. wires rawl plugs etc. including carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge

Providing and fixing 25 mm dia chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete including carriage of materials within all leads and lifts as per direction of Engineer-in-charge.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete including carriage of materials within all leads and lifts as per direction of Engineer-in-charge..

Providing and fixing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm No.minal size). including carriage of material within all lead and lifts

Providing and fixing 40x5 mm flat iron hold fast 14 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm No.minal size). including carriage of material within all lead and lifts

Providing and fixing aluminium handles, ISI marked, anodized (anodized coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials within all leads and lifts. (47.01) 125 mm

Providing and fixing ISI marked cromium plated M.S. sliding door bolts with nuts and screws etc. complete including carriage of materials within all leads and lifts. (48.01) 300x16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodized (anodized coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials within all leads and lifts. (49.01) 200 X 10 mm

Providing and fixing 150 mm ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete including carriage of materials within all leads and lifts.

Providing and fixing 90 mm oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete including carriage of materials within all leads and lifts.

Providing and fixing 200 mm bright finished M.S. hard drawn hooks and eyes I/c carriage of materials with in all lead snd lifts.:

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of materials within all leads and lifts.

Providing and fixing rubber door silencer with screws etc 75mm including carriage of materials in all leads and lifts.

Structural steel work includiing MS hollow sections, riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of materials within all leads and lifts as directed by he Engineer-in-charge.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (a) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including carriage of materials within all leads and lifts as directed by he Engineer-in-charge.

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including carriage of materials within all leads and lifts as directed by he Engineer-in-charge.

Providing and fixing M.S. ornamental screen of steel hollow section, M.S. Sheet 2.50 mm cut into specified design sorrounded by M.S. hollow bar 40X40 mm and hollow bar 20x20mm and border of M.S. square bar 8mm size including applying a coat of steel primer and welding, grinding rubbing of joints complete as per architectural drawings as per direction of Engineer-in-charge including carriage of materials within all leads and lifts as directed by he Engineer-in-charge.

Providing and fixing 0.60mm thick prepainted steel sheet of approved brand and shade and design in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge:-0.60 mm ( zero point sixty millimetre) thick sheet including carriage of material within all leads and lifts.

Providing and fixing ridges or hips 60 cm overall with 0.50mm thick prepainted steel sheets of approved brand, shade and design in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges:-0.60 mm ( zero point sixty millimetre) thick sheet including carriage of material within all leads and lifts.

Providing and fixing flashing 38cm overall with 0.50mm thick prepainted sheet of approved brand shade and design in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge:-0.60 mm ( zero point sixty millimetre) thick sheet including carriage of material within all leads and lifts.

Providing and fixing 30cm wide 120cm overall Box type 0.50mm thick prepainted sheet gutter fixed with bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design (frame work to be measured and paid for separately) :- 0.63 mm ( zero point sixty three millimetre) thick sheet including carriage of material within all leads and lifts.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kg / sqcm) conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including carriage of material within all leads and lifts. (i) Single socketed 150 mm dia pipes.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including carriage of material within all leads and lifts. (64.01) Coupler 150 mm.

Bend 150 mm.

Shoe 150 mm.

Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. for 150 mm dia pipe including carriage of material within all leads and lifts.

Providing and fixing M.S. B.P Sheet 2.00 mm (two milimetre) thick in eaves board/ facia/ soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid for separtely) including carriage of material within all leads and lifts

Providing and fixing M.S. welded mesh 25 X 25 X 2mm thick as per approved design fixed with electric welding including applying approved steel primer etc. complete including carriage of material within all leads and lifts..

6 mm cement plaster of mix 1:3 (1 cement : 3 fine sand) in ceiling including carriage of material within all leads and lifts.

15mm cement plaster in single coat on rough side of brick/concrete/stone walls for interior / exterior plastering upto floor two level including arrises,internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth. in Cement Mortar 1:6(1 cement:6 sand) including carriage of material within all leads and lifts.

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior / exterior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. in Cement Mortar 1:6(1 cement:6 sand) including carriage of material within all leads and lifts.

15mm cement plaster in single coat on fair side with pattern as shown in the architectural drawing for exterior plastering upto all floor levels including arrises,internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth. in Cement Mortar 1:6(1 cement:6 sand) including carriage of material within all leads and lifts.

Extra for plastering on circular work not exceeding 6m in radius in all heights and lngths including carriage of material within all leads and lifts.

Distempering two or more coats on new work with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification including carriage of material within all leads and lifts.

Finishing walls with Acrylic Smooth exterior paint of required shade, new work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including carriage of material within all leads and lifts.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications, Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including carriage of material within all leads and lifts.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture including carriage of material within all leads and lifts.

Polishing two or more coats with french polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt,dust,and sand papered smooth and a coat of wood filler including carriage of material within all leads and lifts.

Providing and applying white cement based putty of average thickness 1.00mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of materials in all leads and lifts.

Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. Concealed work, including cutting chases and making good the wall etc. including carriage of materials within all leads and lifts as directed by he Engineer-in-charge. (79.01) 1216 (16 mm OD) pipe.

1620 (20 mm OD) pipe

Making connection of G.I. distribution branch 50 to 80 mm No.minal bore with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete including carriage of materials within all leads and lifts as directed by he Engineer-in-charge.

Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately) including carriage of materials within all leads and lifts as directed by he Engineer-in-charge.

Providing and fixing 20 mm dia nominal bore G.I. pipes (medium grade) complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. including carriage of materials within all leads and lifts as directed by he Engineer-in-charge. Internal work -

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c cutting chase and making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall including carriage of materials within all leads and lifts as directed by he Engineer-in-charge. (83.01) 15 mm dia No.minal bore

20 mm dia No.minal bore

Providing and fixing 25 mm dia nominal bore G.I. pipes complete with G.I. fittings including trenching and refilling etc. including carriage of materials within all leads and lifts as directed by he Engineer-in-charge.

Providing and fixing in trenches 150 mm dia PVC Finolex type-B pipe including coller and filling the joints with approved adhesive including carriage of materials within all leads and lifts.

Providing and placing on terrace (at heights) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes including fittings including carriage of materials within all leads and lifts as directed by he Engineer-in-charge.

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm No.minal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm No.minal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design including carriage of materials within all leads and lifts as directed by he Engineer-in-charge. With common burnt clay F.P.S.(No.n modular) bricks of class designation 7.5

Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm No.minal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm No.minal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design including carriage of materials within all leads and lifts as directed by he Engineer-in-charge. With common burnt clay F.P.S.(No.n modular) bricks of class designation 7.5

Providing and fixing wash basin with 32 mm dia C.P. waste, C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required including carriage of materials within all leads and lifts as directed by he Engineer-in-charge.

Providing and fixing vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings including carriage of materials within all leads and lifts as directed by he Engineer-in-charge.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink with drain board 510x1040 mm bowl depth 225 mm as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required including carriage of materials within all leads and lifts as directed by he Engineer-in-charge.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge including carriage of materials within all leads and lifts as directed by he Engineer-in-charge.

Providing and fixing 15mm dia C.P. Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge including carriage of materials within all leads and lifts as directed by he Engineer-in-charge.

Providing and fixing 32 mm dia flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete including carriage of materials within all leads and lifts as directed by he Engineer-in-charge.

Providing and fixing 100 mm dia CP grating for floor trap complete including carriage of materials within all leads and lifts as directed by he Engineer-in-charge.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete including carriage of materials within all leads and lifts as directed by he Engineer-in-charge.

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on aNo.dised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete including carriage of materials within all leads and lifts as directed by he Engineer-in-charge.

Providing and fixing C.P. brass toilet paper holder including carriage of materials within all leads and lifts as directed by he Engineer-in-charge.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing No.t less than 105 gms including carriage of materials within all leads and lifts as directed by he Engineer-in-charge.

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre / 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete including carriage of materials within all leads and lifts as directed by he Engineer-in-charge.

Providing and fixing white vitreous china Orissa pattern W.C Pan Cira catlogue No. 2071 or equivalent of size 580x440mm water closet squatting pan (Indian type) with intergal type foot rests including carriage of materials within all leads and lifts as directed by he Engineer-in-charge.

Providing and fixing viterous China wash down water closet (European type W.C. pan) universal closet as per catlogue No. 2061 (PRIMA) of Cira make or equivaent with intergal P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement :1 sand) complete including carriage of materials within all leads and lifts as per direction of Engineer in Charge.

Providing and fixing 10.00 ltr.capacity PVC low level flushing cistern Hind ware sleek ultra design No. 186575 size 42 X 39 X 14 cm or equivalent with a pair of brackets with fittings such as lead valve, syphon, 15mm No.minal size PVC ball valve with polythene float,with push button,couplings for connections with inlet, outlet and ovrflow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow) pipe to be measured and paid for separately including carriage of materials within all leads and lifts :-

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand / make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge including carriage of materials within all leads and lifts as directed by he Engineer-in-charge.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) including carriage of materials within all leads and lifts as directed by he Engineer-in-charge. (105.01) 25 mm nominal bore

20 mm nominal bore

15 mm nominal bore

Providing and fixing 45 cm length 15 mm nominal bore uplasticised PVC connection pipe with brass unions including carriage of materials within all leads and lifts as directed by he Engineer-in-charge.

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock (ESS ESS make or equivalent) of approved quality conforming to IS standards and weighing No.t less than 810 gms. including carriage of materials within all leads and lifts as directed by he Engineer-in-charge.

Providing and fixing 15 mm nominal bore C.P. brass angle valve (ESS ESS make or equivalent) for basin mixer and geyser points of approved quality conforming to IS:8931 including carriage of materials within all leads and lifts as directed by he Engineer-in-charge.

Providing and fixing 15 mm nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete including carriage of materials within all leads and lifts as directed by he Engineer-in-charge.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing No.t less than 106 gms. including carriage of materials within all leads and lifts as directed by he Engineer-in-charge.

Providing and fixing pipes on wall face PVC Finolex type-B spigot,socket, waste and ventilating pipes of working pressure No.t less than 4.5 kg/sqm i/c filling the joints with approved adhesive complete including carriage of materials within all leads and lifts.:- (111.01) 110 mm dia.

150 mm dia.

Providing and fixing PVC Finolex clamps ISI marked of approved design with steel screws and rawal plugs etc. complete including carriage of materials within all leads and lifts:- (112.01) 110 mm dia.

150 mm dia.

Providing and fixing PVC Finolex plain bend of any radious ISI marked complete including filling the joints with approved adhesive complete including carriage of materials within all leads and lifts:- (113.01) PVC Plain bend 110mm dia.

150 mm dia.

Providing and fixing PVC Finolex door bend of any radious with oval access door, insertion rubber washer ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- (114.01) 110mm dia.

150 mm dia.

Providing and fixing PVC Finolex single equal branch with oval access door, ISI marked insertion rubber washer complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- (115.01) 110 mm dia.

150 mm dia.

Providing and fixing PVC Finolex plain single equal branch including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- (116.01) 110mm dia.

150 mm dia.

Providing and fixing PVC Finolex collars ISI marked including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts:- (117.01) 110mm dia.

150 mm dia.

Providing and fixing PVC Finolex cowl ISI marked including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts:- (118.01) 110mm dia.

150 mm dia.

Providing and fixing PVC Finolex ‘P’ or 'S' trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete including carriage of materials within all leads and lifts.(i) 110 mm (hundred ten milimetres) nominal size.

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials within all leads and lifts :-110 mm X 90 mm.

Providing and fixing 610mm size C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws including carriage of materials within all leads and lifts.

Cutting holes up to 15x15 cm in R.C.C. beam / floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm No.minal size), including finishing complete so as to make it leak proof including carriage of materials within all leads and lifts as directed by he Engineer-in-charge. .

Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand 6 graded stone aggregate 20 mm No.minal size) including disposal of malba upto dumping site including carriage of materials within all leads and lifts as directed by he Engineer-in-charge..

Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system No.t less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge including carriage of materials within all leads and lifts as directed by he Engineer-in-charge...

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm No.minal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm No.minal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm No.minal size) finished with a floating coat of neat cement complete as per standard design including carriage of materials within all leads and lifts: (125.01) Inside size 90x80 cm and 45 cm deep including 600x450 mm precast R.C.C. manhole cover with frame - L.D. - 25 internal dimensions, : With Sewer bricks conforming to IS : 4885

Inside size 120x90 cm and 90 cm deep including Circular shape 560 mm dia precast R.C.C. manhole cover with frame - H.D. - 20 : With Sewer bricks conforming to IS : 4885

Providing and installing mono block pump 2-HP single phase of kriloskar make or equivalent including fixing complete including carriage of materials within all leads and lifts.

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality including carriage of materials within all leads and lifts. (127.01) L D- 2.5 Rectangular shape 600x450 mm internal dimensions

L D- 2.5 Circular shape 450 mm internal diameter

M D - 10 Square shape 450 mm internal dimension

rajesh kumar suman

A.G.CONSTRUCTIONS

Shiv Kumar Kuthiala