PROVN OF TILING 03 BATHROOM AT 1 TIGRIS ROAD, BATHING POINT ETC AT CHECK POST 9 POLO ROAD, ADDN/ALTN BLDG NO P-9 BAIRD PLACE, SPL REPAIR TO EXISTING OFFICE SPACES Q (LAND) OF THE HQ DELHI AREA AND PROVN OF VEHICLE SHED AT 972 WKSP IN THE AOR OF AGE B

Amount

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, complete all as specified and as directed.

Taking down chowkhats or frame with shutters without taking shutter from frame not exc 1.5 Sqm each complete all specified and directed.

Taking down chowkhats or frame with shutters without taking shutter from frame exc 1.5 Sqm and n exc 4.00 sqm each complete all specified and directed.

Surface excavation n exceeding 30 cm deep and averaging 15 cm deep and getting out in any type of soil.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out as in soft/loose soil complete all as specified and directed.

Returning filling in including spreading, leveling, watering and well ramming in layers not exc 25 cm.

Removing excavated material exc 250 M and not exc 500m deposited where directed.

Taking up or down 15mm bore GI tubing and connections including removing off the site, complete all as specified and as directed.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings all as specified.

M&L for cement concrete 1:4:8 , Type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for cement concrete type C2 1:3:6 (40mm graded aggregate) in surface channel and drain.

M&L for cement concrete type B-O 1:2:4 (12.5mm graded aggregate) for copings on brick work/ packing of sides, adjust complete all as specified

M&L for 1st/Premium quality glazed ceramic tiles with of size 600X 300X 7mm thick as in vertical surfaces such as skirtings, dados etc set & jointed in neat cement slurry & pointed with white or coloured cement to match the shade of tiles over and incl 10mm thick in CM 1:4 including dismantling complete all as specified and directed.

M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:6) complete all as specified

M&L for Vetrified ceramic tiles dark shed 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:6), including dismantling of existing floor finishes complete all as specified

M&L Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick in CM (1:4) as in backing coat including demolition complete all as specified and as directed by Engr-in-Charge.

Labour only rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete.

Provn of making hole in marble/granite slab of cooking plateforme for cooking gas pipe etc by means of drilling machine all as directed.

M&L for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM(1:4) complete all as specified and directed.

M&L rendering 15mm thick in cement mortar 1:4 on fair faces of brick walls finishing even and fair without using extra cement.

S&F in repair fancy type chromium plated long body Bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm bore icluding CP wall flange complete

S&F in repair fancy type Stop valves cast copper alloy chromium plated screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipes or for unions, 15mm dia of pipe, complete.

S&F in repair Center hole basin mixer 15mm dia chromium plated brass with swinging spout including plugging and securing to walls,complete. (Make : Jaquar Cat Part No- OPL-15011B/Cera Cat Part No-F3001461/Somany Cat Part No-220912/Hindware Cat Part No-F330014CP).

S&F in repair PVC connections 15 mm size with PTMT nuts of length 300 mm long complete.

Wall mixer 3 in 1 inlet system with provision of both shower (hand shower and over head shower) complete with suitable long bend pipe connecting leg, CP flange etc., fixed in repair, complete all as specified and as directed. (Make: Jaquar Cat Part No-5273UPR or equivalent in Cera/Hindware).

S&F CP health Faucet with 1.5 mtr long flexible pipe as per approved sample complete all as specified and directed. Make: Jaquar ALD CHR 563 or Equivalnt in Hindware or Cera

S&F in repair Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specifed and directed.

S&F in repair Tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete.

S&F aluminium anodized grills with 6mm x 5mm aluminium section having square or diamond shap with fixing rails of channels 12-15mm complete all as directed.

S&F in repair PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete

S&F aitreous china squalting pan of Orrisa pattern long pan size 580mm x 440mm white with 'P' or 'S' trap front or back inlet and foot rest any pattern including connection to trap and to flushing pipe etc complete including lime concrete bedding and making good to floor, fixed in repair, complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan pedestal pattern white including connection in drain and in flushing pipe complete including 'P' or 'S' trap complete all as specifed and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rails lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, complete all as specified and as directed.

S&F Glazed and Skelton shutters using 2nd class hard wood, 35mm thick open rebated and prepared to receive glass or gauge etc., edges of framing plain and chamfered or fitted with cut or mitered beads for securing glass or gauze, size of member of shutter as specified in SSR Part-I section 8, clause 8.23(a) and divided in square complete all as specified and as directed.

S&F Factory made Flush door shutters 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed.

S&F Pressed Steel Frames for Doors 125x60mm with one more rebates inclduing necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed

S&F 100mm size butt hinges (medium weight) colled rolled mild steel, complete all as specified and as directed.

S&F Aluminium anodized 150mm size barrel tower bolt of extruded section and fixed, complete all as specified and as directed.

S&F 300 mm size aluminium alloy anodised sliding door bolt with haps, staple ( bolt type ) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed.

S&F 150 mm Floor Door Stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor

S&F Galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples

S&F in repair PVC 110mm bore (SWR) pipes single socketed, in any length with rubber ring joints, flaid in trenches or in floors, complete all as specified and as directed.

S&F PVC (SWR) bend of 110mm bore any radius, complete all as specified and as directed.

S&F PVC (SWR) single junction (single 'T') of 110mm bore any radius, complete all as specified and as directed.

S&F Precast Plastoc fibre Reinforced Concerte Manhole cover medium duty if size 1000mmx 500mm x70mm conforming to IS-12592 incl demoliton of old RCC wrok complete all as specified and directed

Preparation of new wooden surfaces and applying two coat of synthetic enamel paint over a coat of pink primer of any description, not otherwise described over 10cm width or girth, complete all as specified and as directed.

M&L for Modular kitchen & Wardrobe / cupboard with 18 mm thick one side decorative and other side balancing lamination factory pressed HDHMR Board leives of action Tesa and equavalent including 2 mm thick PVC edge banding tape with hot glue by edge bending machine etc with auto closing spring loaded hinges (hydraulic) type) etc or sliding sliding with track arrangement as directed including necessary accessorise like Brass handle, Magnatic catch etc and steel baskets of required size mounted on suitable channels with ball bearing to moving of baskets smoothly including all necessary fittings and fixture and 8mm thick both sides Preliminated BSB (Both side balancing proper ) HDHMR of Action Tesa and equavalent as per IS:14587:1998 fixed complete all as specified. Note: Kitchen accessories ie baskets, cutlery baskets, fittings and fixture will be measured and paid separately as supply only.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed Including dismantling of exisiting sheet.

Mild steel work as in Hollow section, angle Iron, flat Iron for fixed indepently connecting purlin, rafters, MS plate as reqd forming holes bolted and welded attchment and curved shaped by welding (thickness of metal n.exxc.6mm) making jointless by filling including cutting etc, complete all as specified and as directed.

Excavating in any type of soil in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240

M & L for PCC 1:3:6 type C-2 ( Nominalmix) using 40 mm graded stone aggregate as in foundation filling and similar work complete all as specified and as directed.

S&F Pre- painted galvatume aluminum SMP coated GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for preparing new Steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamalle paint over a coat of red oxide primer. complete all as specified and as directed.

S&F Rolled sections Fe 410-W (Gde-E- 250) quality-A as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates as required complete all as specified and as directed.

M&L 75mm thick PCC 1:4:8 type D-2 (40 mm graded stone agg) as in Sub base to receve floor finishes etc complete all as specified and directed.

M&L for hard core of broken stone or boulder of gauge not exc 63mm, deposited, spread and level in layers not exc 15cm thick watered and rammed to a true surface complete all as specified and directed.(75 mm. thk.hardcore n rcc 63 mm. )

M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and directed.

M&L for 50mm thick sand cushion/Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for 40mm thick DPC in cement concrete(1:2:4) B-type(12.5mm graded aggragate) to horizontal & vertical surface including necessary form work and complete all as specified & directed.

M&L for Polythen film 50mm thick micron laid with a coat of bitumin primer @0.30to 0.50 Kg per Sqm on DPC complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:6 on stone masonry surfaces or surfaces other than fair faces of brick work, finished fair and even without using extra cement complete all as specified and directed.

M&L for 20 mm thick rendering consisting of two layers, first layer 10 mm thick in CM 1:4 and top layer 10 mm thick in CM 1:4 mixed with WPC on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and directed. (Note:- WPC shall be measured and paid separately).

M&L for 75 mm thick in Plain cement concrete type C2 ( 1:3:6) ( using 40 mm graded aggregate ) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as directed at site.

Taking down cement plaster / duster bed PCC of Column, chajja, Parapets of roof, facia, drops etc and making good with cement plaster 10mm thick in CM 1:3 with PCC 1:2:4, (average thickness of PCC 25mm) as required, brushing neat cement slurry with 3.0kg of cement per sq. metre including necessary form work and scaffolding upto 2nd floor including fixing of wire netting where required to match the existing surfaces.

Applying evenly a coat of bituminous primer conforming to IS- 3384 @ 0.30Ltr/Sqm. Over the primed surface, apply a coat of hot blown 85/25 penetration grade bitumen conforming to IS- 702 @ 1.2 Kg/Sqm of the surface area. Applying APP based polymeric membrane minimum weight 3.50kg/Sqm and of minimum thickness 3mm, reiforced with polyster non woven fabric ( weight not less than 150gm/Sqm ). APP membrane will be laid by torching overlaps with a propane or butane gastorch and laid across the slope from lowest line of roof towards ridge with over laps of 75mm in length side and 100mm on the width side of membrane bonded with hot blown bitumen. (Note : (1) The work shall be executed through authorised applicator of manufacturer only. (2) Authrised Applicator shall be approved by GE before starting of work. (3) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Ten years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer.

M&L for preparation and applying two coats of solar reflective paint over APP based polymetric membrane with required finishes complete all as specified and as directed.

S&F factory made steel fibre reinforced (SFRC) man holes covers with frames incl necessary hold fast/hooks (Heavy duty) of 560 mm dia or rectangular of equivalent area complete all as specified. Product Code KCC MHCF-1and equivalent.

Removing excavated material to a distance exc. 50 m and depositing where directed at a level n. exc 1.50 m above the starting point.

Demolition and breaking up SGSW drain pipes 150 mm dia jointed in cement mortar all as specified.

M&L SGSW drain pipes 150 mm dia laid in trenches and jointed in CM (1:3) complete all as specified and directed by Engr-in-Charge.

M&L cement concrete bed (1:4:8) type D-2 using 40mm graded stone aggregate as in bedding to SGSW pipes 150mm dia to drain pipe including formaing cradels in complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces 350 X 250/450 x 350X 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match over and incl 10mm thick CM (1:4) in dado/skirting tiles complete all as specified and directed.

Taking down cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc all as directed.

M&L 10 -12mm thick polymer modified readymix cement base plaster as per manufacturer instruction on fair / unfair faces of brick work or concrete surfaces & finishing the surface even & smooth as per manufacturer instruction complete all as specified & directed.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F in 7 - 8 mm thick slected quality toughned glass cut to size and shape including chamfering of edges cutting holes/ slotes for fixing in doors/ windows with all necessary fixing arrangement complete all as specified and directed. Make - Modi, saint gobin or equivalent.

S&F in 5 - 6 mm thick slected quality toughned glass obsecured or frosted cut to size and shape including chamfering of edges cutting holes/ slotes for fixing in doors/ windows with all necessary fixing arrangement complete all as specified and directed. Make - Modi, saint gobin or equivalent.

M&L for prepration of new/Old plastered surfaces of wall and applying of Birla/JK white wall putty approx 2 mm thick as per manufacturer's instruction on existing prepared surface and make the surface smooth by rubbing with sand papers etc and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/ Old surfaces. complete all as specified and directed.

M&L for preparing Old plasteres surfaces and applying of Birla/JK white wall care putty approx 2 mm thick as per manufacturer's instruction on existing prepared surface and make the surface smooth by rubbing with sand papers etc and applying two coats of Plastic emulsion paint over a coat of primer of walls Surfaces of any description over 10cm girth or width, not otherwise described complete all as specified and directed.

M&L for preparing Old plasteres surfaces ceiling and applying of Birla/JK white wall care putty approx 2 mm thick on ceiling as per manufacturer's instruction on existing prepared surface and make the surface smooth by rubbing with sand papers etc and applying two coats of oil emulsion distemper over a coat of primer on ceiling complete all as specified and directed.

Dismantling water tanks exc 250 Ltrs but not exc 500 ltr capacity and removing to store.

S&F rotantional moulded polythylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore omplete all as specified and directed.

Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing. complete all as specified and as directed by Engineer-in-Charge

S&F steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors, bore of pipe 20 mm dia.including making hole in RCC slabs for vertical pipes & making good the same with Cement Concrete I:2:4 complete all as specified and as directed by Engineer-in-Charge

M&L for Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 in brick or stone wall , cutting not exc 10cm girth complete.

S&F in repair vitreous china Wash hand basin, white, flat back size 550 x 400mm including brackets waste fitting brass chromium plated with long screwed shanks and fly nuts 32mm size bore of pipe complete all as specified and directed.

S&F in repair 32mm Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed.

S&F 450 mm long PVC connection with stainless steel armed 15 mm bore with nuts complete all as specified and as directed by Engineer-in-Charge complete all as specified and directed.

S&F in repair for 15 mm dia fancy type CP bib taps half turn with wall flange with screwed down, screwed for iron pipe or for brass ferrule including cap and fixed complete all as specified and as directed by Engineer-in-Charge

S&F in repair 15 mm bore fancy type Angle valves half turn chromium plated fancy type with wall flange screwed down high pressure screwed both ends for iron pipes or for unions complete all as specified and as directed by Engineer-in-Charge (Make-Hindware/Jaquar Cat Part No. ORM-10053/MARC

S&F in repair for 15 mm dia fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Angle valves, cast copper alloy, screwed down high pressure with crutch or butter fly handle, fancy type, chromium plated with long shank and cup (concealed type), 15mm bore dia of pipe fixed in repair. complete all as directed by Engr-in-charge.

S&F in repair swivel shower with arm of PTMT any colour for fixing witth 15mm pipe (Min wt 40 gms) with shower arm 15mm size, 195mm long with band of 450 with flang of PTMT any clour of (40 gms)

S&F CP Brass soap dish complete all as specified & directed Make Hindware Cat No F880011/Cera F5003106.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for 25 mm thick plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in floors finished rough all as specified.

M&L for 1st/Premium quality glazed ceramic digital coloured tiles with highlighter concetp in matching pattern of size 1200 X 600 X 8 to 10 mm thick as in vertical surfaces such as skirtings, dados etc set & jointed in neat cement slurry & pointed with white or coloured cement to match the shade of tiles over and incl 10 mm thick backing coat in CM (1:4) complete all as specified and directed.

Dismantling wall and ceiling boards ( fibre pulp, insulation etc ) or insulation boards/ slabs/ blank ets, any thickness, incl cover fillets all as directed.

S&F for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm center to center/ Intermediate channel 0.9 mm thick having to equal flanes of 15 mm each and web of 45 mm suspended from soffit at approx x 900mm center to center with GI cleat and steel expension fastners with and including ceiling section ( not exc 1.2m length ) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50 mm fixed to the intermediate channel at 457 mm center to center. Including Hangers 6mm dia GI up to 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI Flat 40x3mm size 60mm long and expansion hold fastners 12.50 dia. 40 mm long complete all as specified and as directed.

S &F Providing and fixing 10 mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class hard wood fillets, or metal frame and work with GI wire mesh( fillet, Metal frame work and GI Wire mesh paid seprately) as specified and as directed.

S&F 15 mm bore 2 way angel valve with wall flange complete all as specified & directed Make Somany Cat No 220909/CERA Cat No 2008211, MARC MJN-1410.

S & F CP Toilet Paper holder with flap guard complete all as specified and directed Make Cera Cat No F5003110/Somany Cat No 230507/Hindware F-880003/ Essess or Equivalent.

S&F CP towel rack 600 mm with hook complete all as specified and directed Make CERA F-5002101/Hindware F-880008, Somany Cat No 230502 , Essess or Equivalent.

S & F Corner Glass Shelf 300 x 300 mm radius consisting of 5.5mm thick sheet glass with chromium plated brass brackets with two No CP Railing in each set complete all as specified and directed Make Cera Cat No F5005103 or equivalent Hindware/Somany.

S & F in repair CP Health Faucet with 1.00 Mtr long CP Flexible pipe as per approved sample complete all as specified and directed Make Hindware Cart Part No F160001/Marc Cat No MAC-3052 Cera Cart No F8030103 / Essess or Equivalent.

S & F in repair Jet Spray chromium plated brass for EWC with and including flexible tubes 15 mm bore of suitable length of approved makes Complete all as specified and as directed.

S&F Vitreous china wash down water closet pan wall hung WC 2049 EWC Wall hung Ext. 'P" 655 x 390 x 745 mm cistern 2129 , shoft closed seat cover2356 and 2238 twin flush fitting of Cera , hindware , jaquar or other equivelent , including flushing cistern r and fixed with brass screw complete all as specified and as directed.

S&F Stainless steel thali basket (11-13 division) of size 50cmx37cmx20cm made of 4mm th S.S.wire approved quality with suitable arrangement including Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved Make: Life style Cat part No WA/TB/15208 or equivalent approved

S&F Stainless steel Plate basket (11-13 division) of size 50cmx37cmx16cm made of 4mm th S.S.wire approved quality with suitable arrangement including Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved Make: Life style Cat part No WA/PTH/15206 or equivalent approved

S&F Stainless steel Cutlary basket of size 50cmx37cmx10cm made of 4mm th S.S.wire and bottom of S S perforated sheet approved quality with suitable arrangement including Telescope basket (channel) 18''/20'' length two way extruded MS galvanised over rollers of approvedMake: Life style Cat part No WA/CUT/15204 or equivalent approved

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl fixing with adhesive in apropreat platform complete all as specifed and dircted.

S&F in repair sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with & including one waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement ,with PVC coupling, PVC waste pipe 40mm bore 750mm long complete all as specified and directed. Cat part No:-. BSSBSD-52 of Make Blue Star or equivalent model in specified makes as approved by GE.

S&F 15 mm bore brass CP single lever Sink mixture for Mixing Hot and Cold water fixed as per manufacture’s manual, with long shunk and cup washers, screwed both ends for iron pipes or for unions complete all as specified and directed Make : Jaquar Cat Part No. LYR-38309 /Hindware F-280020CP or equivelent.

M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, cooler stand and similar work con- forming to Fe.290.Gde-E-165

S&F for powder coated anodized aluminium frames for doors, windows, ventilators with one or more rebates incl cleats for fixing etc. complete all as specified & directed.

S&F for powder coated anodized aluminium windows/ventilators shutters (glazed & gauzed) side hung type without sash, aluminium section weighing 0.55 kg/m incl necessary joining cleats, glazing clips, rubber packing, snap beading, aluminium handles, tower bolts, hinges, peg sets, 5 mm thick sheet glass & stainless steel wire cloth 0.36 mm dia of wire and average width of aperture 1.40 mm etc. complete all as specified & directed.

S&F for powder coated anodized aluminium ventilators shutters fixed/ top hung type without sash, aluminium section weighing 0.55 kg/m incl necessary joining cleats, glazing clips, rubber packing, snap beading, 5 mm thick sheet glass etc. complete all as specified & directed.

S&F for powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F for 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified.

M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified.

M&L for 5.5mm thick Sheet glass, ordinary quality and glazing with beads in square exc 0.5 sq. m in each pane

M&L for solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers

S&F in repair Drapery rod 25mm dia stainless steel pipe with steel finish 1 mm thick incl steel end bulbs, steel brackets etc incl connected items complete all as specified and directed.

M&L for vitrified coloured Ceramic tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, on vertical surfaces as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over 10mm thick rendering in CM 1:4, including dismantling of existing tiles complete all as specified and directed.

M&L for Cutting openings built in cement mortar, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. to store and rubbish not exc. 50m.

M&L for Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work in CM 1:4, complete

M&L for Making good under cills or over arches, lintels and bressummers including all pinning when necessary in CM 1:4.

S&F for 0.63mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

M&L for rendering 05 mm thick plaster in CM 1:3 on ceiling finished even and smooth without using extra cement complete.

M&L for rendering 15mm thick plaster on wall in CM 1:6 finished even and smooth without using extra cement complete.

M&L for 12 mm thick Perforated particle board/tiles for insulation and accoustic purposes, 60x60 cm in size, fixed with nails to timber framework or with staples on snap grid complete all as specified and directed.

S&F for WPC SHEET WALL PANELLING of thickness 5mm ( ±0.25 ) consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm (±0.25 ) thick Prelam WPC sheet. The panel & strips shall be density of 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company. The strips should have in their center a grove of 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10” between two WPC strips. The WPC strips shall be fixed to the wall using 65mm long M.S. screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm (±0.25 ) thick WPC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement including all fixing assecerories,moulding,corner beads and dismantling of existing panelling Make- rajshree or equivalent

M&L for complete removal of existing treatment on old surfaces of wall and applying two coats of acrylic emulsion paint over one coat of primer and one coat of 1mm thick wall care putty complete all as specified and as directed.

S & F Venition Blinds with Fabirc sides of length and width including Framing hooks and conneting items as per specified and directed by Engr in Charge.

S&F for 4 seater workstation size (2400 x 1200 x 900 mm) powder coated finish complete all as specied and directed. (Make : Sky Office Systems, HSN 9403)

S&F for aluminum partition with MDF board of size 1000mm x 1000 mm x 50 mm thick including cleat, screw & beads complete all as specified and directed.

S&F for 150mm Brass handle, cast type, polished bright complete all as specified and directed

S&F for 50mm size cup board locks of brass including keys set, complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

Excavating over areas, n exc 1.5 m deep and getting out soft/loose soil complete all as specified and directed

M&L for 100 mm thick PCC (1:3:6) type C2 (using 40mm graded aggregate) as in floor finished surface even complete all as specified and directed.

M&L for 70 mm thick PCC (1:2:4) type B1 (using 20mm graded aggregate) as in floor finished surface even complete all as specified and directed.

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A' complete all as specified and directed.

M&L for Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ omplete all as specified and directed.

Taking down carefully old unserviceable copper/aluminium point wiring From existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, regulator and socket etc are to be measured seperately and making good the disturbed surface complete all as directed.

M&L for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and stranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends, elbow, reducers except conduit junction box (junction box will be of MS) including FRLS, PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size with modular sheet for fixing modular switches/sockets/fan regulator etc , complete all as directed one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.

All same as per srl item No 154 but one socket outlet point 5 amps on the same board.

All same as per srl item No 154 but one socket outlet point 5 amps on the independent board.

All same as per srl item No 154 but but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for independent point.

S&F Modular switch 6 Amp, 1 way, 1 module size complete all as directed.

S&F Modular socket 6 Amp, 2/3 pin, universal type, 2 module size complete all as directed.

S&F Modular switch 16 Amp, 1 way, 1 module size with indicator lamp complete all as directed.

S&F Modular socket 16 Amp multipurpose shuttered type, 2 module size with indicator lamp complete all as directed.

S&F Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as directed.

S & F in repair LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 20Watts, cool/warm white as per site requirement complete all as specified and directed.

S & F in repair LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 10Watts, cool/warm white as per site requirement complete all as specified and directed.

S & F in repair energy efficicent LED fittings 45W LED 6K suitable for builing security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as directed.

Supply and fixing in repair of street light fitting bracket, 1 mtr long made out of galvanized iron pipe of 25mm dia size light grade complete with nut, bolts, washer, clamps etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed.

Supply and fixing in repair of Ventilating fan 250 mm sweep plastic body type including self cosing louver and making all electric connections complete all as directed.

Supply and fixing in repair of exhaust fan upto 300 mm sweep metalic body type and making all electric connections complete all as directed and depositing the old U/s item to MES store yard.

M&L in repair Sub main wiring with 2 run of 10.0 Sqmm (nominal area) FR, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC concealed conduit 25 mm dia with and including 10.0 Sqmm (nominal area) FR, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as directed.

Supply and fixing in repair of Modular AC Socket with 25 Amps SP mini MCB, 230 Volts, 50Hz. In 4 module sheet metal enclosure complete all as specified and as directed.

Supply and fixing of high pressure booster pump with 8 ltr capacity pressure tank, coupled with electric motor of capacity 0.50 HP, 230 volts, single phase, 50 Hz incl Pressure Guage, Pressure switch & connecting accessories of GI i.e bend, nipple, socket, tee of requisite size etc incl cutting of existing pipe complete all as directed.

Supply and fixing in replacement of LED post top lantern fitting powder coated aluminium die cast and spun aluminium with clear/opal diffuser 25 Watt incl LED driver with gallary suitable for mounting on 32/40 mm GI pipe including necessary electric connections complete all as directed.

M & L in repair of Garden light fitting comprising of milky white PVC globe dia 200 mm and gallary suitable for mounting on 32/40 mm GI pipe with B22 base including necessary electric connections complete all as specified and as directed.

S&F in repair of Galvanised steel water tubing medium grade of size 32 mm bore for fixing garden light complete all as specified .

S & F in repair of rigid non metallic PVC conduit 20mm dia inclusive of all tees, bends, elbow, reducers, bell mouth tube ends and fixing accessories such as couplers lock nuts saddles, pipe hook etc. complete including cutting chasis in wall and making good the surface complete all as specified and as directed.

S & F in repair of MCB DB confirming to IP 43 - IK 09 with single door , SPN 02 way complete with din rail Neutral and earthing bar after taking out the oldunserviceable DBs connection and making good the disturbed surfaces complete all as specified and as directed.

S&F in repair of MCB SP, C Curve type, 10 KA, 10 to 32 Amp, with over load and short circuit protection complete all as directed.

S&F in repair of MCB SPN C Curve type, 10 KA, 40 to 63 Amp, with over load and short circuit protection complete all as directed.

S& F Static Energy Meter three phase electronic type with LCD display of capacity 10-60A including connection with seal and sealing wire including taking out the old u/s and depositing to MES store yard complete all as specified and as directed .

S&F of aluminium cable 1100 Volt grade, served with inner sheathing of PVC tape and overall PVC sheathed twin core cable circular of size 4 Sqmm ISI marked in service connections, including taking down old unserviceble cable, complete all as specified and as directed.

Taking down old unserviceable point wiring from existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, regulator and socket, light fittings etc to be measured separatly and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc complete all as directed.

Material and labour of point wiring complete with1.5 Sq mm (nominal area) FRLS PVC insulated unsheathed and multistranded copper conductor cable ISI marked in existing concealed conduit for fixing modular switches/sockets etc and FRLS PVC insulated unsheathed 1.5 Sqmm copper conductor mulistranded earth wire, connecting to common earth dolly for one light point / fan point/bell point controlled by one 1-way switch complete all as directed .

All as per srl item No 182 here-in-before but with 1.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for One 3 pin socket outlet 5 amps on the same board complete all as directed.

All as per srl item No 182 here-in-before but with 1.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for one 3pin socket outet point 5 amps on the independent board..

All as per srl item No 182 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire independent board complete all as directed.

M&L of single core FRLS copper wire 1.5 Sqmm in existing conduit, for fitting to fittings complete all as directed.

S & F Modular bell push 6 Amp, 1 way, 1 module size complete all as directed.

S & F Modular Fan regulator step type ,120 watts complete all as directed.

Supply and fixing in replacement ceiling fan complete with blades, down rods,suitable for regulator and accessories, 230 V, 1200mm sweep (BLDC) and depositing old U/S fan to MES store yard complete all as directed.

Supply and fixing in replacement electric bell of DINGDONG type, 230 volts, single pole and making all necessary connections complete all as directed.

Supply and fixing engagement light fitting with 3 watt, 2x LED lamp ( red and green) including all electric connections complete all as directed.

S&F in repair of recess/Surface mounting 2x2 square flat panel ultra slim scoop LED light 36/40 W warm/cool white with driver/transformer etc suitable for Grid ceiling/Gypsum board/POP ceiling incl making electric connection complete as as directed.

Taking down and refixing of 2'x2' Square flat panel suitable for Grid ceiling/Gypsum board/POP ceiling incl making electric connection complete as as directed.

Supply and fixing of Wall Mounted Fan 400 mm sweep plastic body type including making all electric connections complete all as directed.

S & F Modular white cover plate with frame 2 Module complete all as directed.

S & F Modular white cover plate with frame 3 Module complete all as directed.

S & F Modular white cover plate with frame 6 Module complete all as directed.

S &F Modular white cover plate with frame 12 Module complete all As directed.

S & F Modular metal flush box 1/2 Module complete all as directed.

S & F Modular metal flush box 3 Module complete all as directed.

S & F Modular metal flush box 6 Module complete all as directed.

S & F Modular metal flush box 12 Module complete all as directed.

Supply and fixing 25 mm PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as directed.

Supply & Fix in repair SPN DB with double door 8 way, 240V with busbar 200A rated,making all electric connections complete all as specified and directed.

Material and labour in replacement submain wiring complete with 2 x 6 sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 6 sqmm as earth wire through existing PVC concealed conduit complete all as directed.

Material and labour in replacement submain wiring complete with 2 x 4.0 sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 4 sqmm as earth wire through existing PVC concealed conduit complete all as directed.

Supply and fixing in replacement of Geyser 25 ltre capacity vertical type with steel tank and glass inner linen , 5 star rating complete including fastners (4No.) for hanging and CP and PVC connection for inlet and outlet upto stop cock including taking down the old u/s geryser and depositing to MES store yard complete all as specifed and directed.

M&L in repair for Sub main wiring with 2 run of 4 .0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC concealed conduit 25 mm dia with and including 4.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as directed.- Make of copper wire :-RR Cable/Havells/ Standard. Note : 1. The conduit and conduit accessories shall be measured and paid as one unit. 2. The cost of earth wire is included in the quoted rates.

M&L for preparation of new steel surface and applying two coat of synthetic enamel paint above red oxide over 10 cm width or girth complete all as directed.