N I T / 2

ITEM NO.: 1 Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete..... (INo42-30, PgNo 277) ( STATE SSR) Item Spec: (As directed by Engineer in charge.)

ITEM,NO.: 2 Providing and laying ceramic tiles having size 30 cm x 30 cm confirming I.S.15622/2006 (group D II-A)ahd 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. Complete..... (INo33-24, PgNo 215) (STATE SSK) Item Spec: (Bd.M. 12 Page No. 385.)

ITEM NO.: 3 Providing and laying ceramic tiles having size 30 cm. X 30 cm. For dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. Complete.....(INo33-25, PgNo 215) (STATE SSR) Item Spec: (Bd.M.13 Page No. 386.)

ITEM NO.: 4 Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted/welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.....(INo23-01, PgNo 173) (STATE SSR) Item Spec: (Bd.C.2 Page No. 275)

ITEM NO.: 5 Providing and fixing of colour coate Zincaluminium(R) AZ150 (min 150 gms/sq.mt. Total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT), Hi-strength steel with min. 550 Mpa yield strength, metallic hot dip coated withAluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND (R) steel quality super durable polyster paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 mm, comprising of nominal 25mmexterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with sublet square fluting in the five pan at nominal 180-250 mmcenter-to-center. The end rib shall be designed for anti-capacity groove. & return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. Fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. Complete. (weight of profile 4.52 kg/sqm) 301 mm to 600 mm girth (Surface Width)..... (INo38-35, PgNo 237) (STATE SSR) Item Spec: (As directed by Engineer in charge.)

ITEM NO.: 6 Providing, laying and fixing P.V.C. pipe of 110 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.....(INo42-28, PgNo 277) (STATE SSR) Item Spec: (As directed by Engineer in charge.)

ITEM NO.: 7 Providing and fixing on walls/ ceiling/floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete..... (INo42-55, PgNo 280) ( STATE SSR) Item Spec: (BD.V 5 page 551 and as directed by Engineer in charge)

ITEM NO.: 8 Providing and fixing 10 cm PVC nahanítrap with grating etc. complete..... (INo42-67, PgNo 281) (STATE SSR) Item Spec: (BD.V 32 A page 551 and as directed by Engineer in charge)

Please Enable Macros to View BoQ information