8321 SPECIAL REPAIR BLDG NO ET 23 AND ROOF TREATMENT TO BLDG NO ET 21 OF HQ 3 EW BDE (CAMP) UNDER GE (CENTRAL) PUNE

Amount

Demolition of unreinforced concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as directed.

M & L for coloured non-skid tiles 600x600x7 to 8mm thick (square/rectangular) in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in cement mortar 1:6 complete all specified.

M&L for glazed ceramic designer coloured tiles of size 300mm x 600mm x 7 to 8mm thick as in dados or skirting over backing coat 10mm thick in CM (1:4), set and jointed in neat grey cement slurry and pointed in white or colour cement to match the tiles as directed and specified.

M & L for 25mm thick PCC type B-0, 1:2:4 (12.5mm graded stone aggregate) as in levelling coarse complete all as specified.

Taking down chowkat exc 1.5 Sqm but n.exc 4 sqm each (without taking off shutters from the frame) complete all as specified and as directed

Taking down Chowkats or frames not exc 1.5 Sqm each (without taking off shutters from the frame) complete all as specified and as directed

S&F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 gauge complete all as shown in sketch on page 180 of SSR 2020 Part II complete all as specified and directed.

S&F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solvent cement complete all as shown in drg give on page 176 of SSR 2020 Part II. The width of stiles and rails shall be as specified in para 8B.2.1 on page 145 of SSR 2020 Part II. Each PVC door shutter leaf consist of 4 Nos 100 mm long MS butt hinges. complete all as specified and directed.

S&F fixed louvered glass ventilators with and including 5mm thick frosted / pin headed glass and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed. (a) SP - 20048 (b) Glazing clips - 19352. complete all as specified and directed by Engineer-in-Charge.

S&F three track sliding window & ventiltors with two or more shutter with including using 5 mm thick tinted glass and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S&F MS framed work such as grills , grating with ends of bar shoudered and/or riveted or forged into spikes , framed Guard bars, railing and likes etc conformed to Fe-290, Gde-E-165 of MS angle or other section complete as directed .

S&F aluminium powder coated frame for doors & windows, Shutters ventilators, with one or more rebates including joining cleat for fixing etc complete all as specified and directed

S&F anodised powder coated aluminium door shutters (single / double leaf) or partitions, aluminium section weighing 0.55kg/m including necessary joining cleats, al powder coated glazing clips, rubber neoprene packing, Al powder coated handles 2 Nos in each door, aluminium powder coated tower bolt 02 Nos, hinges 03 Nos, aluminium powder coated snap beading, screws, door stopper 01 No etc. complete all as specified.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as directed .

S&F in repairs Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed (Aluminium extruded section body) complete all as directed .

S & F mortice lock vertical type 100mm brass four lever complete.

S & F 150 mm extruded aluminium alloy powder coated handles , fabricated type all as specified and directed .

S & F 150mm long Aluminium anodised powder coated barrel tower bolt of extruded section for PVC shutters all as specified and directed .

S & F butt hinges 100mm size MS cold rolled medium weight all as specified.

S & F for 150mm long floor door stopper of aluminium alloy body and Tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed

S & F in repair 25mm dia aluminium anodised powder coated curtain rails with SS brakcet, knobs, rings @ 10cm c/c etc complete all as specified.

Dismantling of AC sheet corrugated, or semi corrugated in roof covering complete all as directed .

S & F 0.50 thick (Total coated thickness) pre-colour, pre-profiled (Galvalume/Zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof, wall cladding, fixed with zinc coated self tapping screws including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturerer's/profile maker's instruction complete all as specified and directed.

S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheeting 0.5 mm thick of required colour and shape having tensile strength of 550 Mpa as in ridge valley, gutters, bridge board, roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as directed .

M & L for precast cement concrete block masonry exceeding 10cm in width witth solid blocks of PCC (1:5:8) grade D-5 and setting in CM 1:6 all as specified and directed

M & L for precast cement concrete block masonry not exceeding 10cm in width with solid blocks of PCC (1:5:8) gde D-4 and setting in CM 1:4 all as specified and directed.

S & F1 5mm bore dia medium grade GI tubing with all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down old steel water tubing and connection all as specified and directed.

S & F 20mm bore dia medium grade GI tubing with all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down old steel water tubing and connection all as specified and directed.

S & F in repairs fancy type, chromium plated, bib tap cast copper alloy with crutch or butter fly handle , including wall flange, screwed down, screwed for iron pipe 15 mm bore or brass ferrule complete all as specified and directed.

S & F in repair, 15mm dia Angular stop cock with wall flange cast copper alloy chromium plated, fancy type screwed down high pressure with crutch or buterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair vitreous china squatting pan "ORISSA" pattern of size 580mm x 440 mm, white with integral foot rest including cast iron 'P' or 'S' trap and connection to trap includintg cement concrete bedding complete all as specified and directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern, 10 Ltr capacity, low level, white with inlet ball valve, float and handle including brackets and including flush pipe of polyethylene or low or high density or PVC 32mm dia, for low level cistern etc complete all as specified and as dirrected.

S & F in repairs vitreous China white wash down water closet pan pedestal pattern (EWC) including cast iron 'P' or 'S' trap , fixing bolts, white soft closed seat cover closed pattern with flat bottom (white colour) and cover complete all as specified and directed .

S&F in repair PVC connection 15 mm of size with PTMT nut of length 450 mm.

S&F in repair vitreous china counter top type wash basin, size 550x430x195 , white incuding long thread chromium plated waste coupling and waste pipe complete all as specified.

Supply and Fix in repairs Pillar tap 15mm bore, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down, high pressure with long shanks and fly nuts, screwed for iron pipe complete all as specified

Supply and Fix in repairs vitreous china urinal (Top inlet), with fixing accessories half stall type, including PVC down waste pipe, fixing plugs etc and fix to walls and connect to existing flush systems complete as directed and specified

M & L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms , shelve and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and ensure best adhesion to surface including grinding of exposed / visible edges and including cutting chases to embed in wash hand basin complete all as specified and as directed.

M&L for 20-25mm thick machine cut cudappah stone slab for vertical supports of kitchen platforms and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing of the exposed face complete all as directed and specified.

Taking down plastering on lathing (other than wire-netting), without removing lathing, in cement mortar (one side only measured in cases where both sides are plastered) cement plaster complete all as directed.

M & L rendering 15 mm thick in CM 1:6 on stone masonry surfaces other than fair faces of brick work or stone surfaces all as specified and directed

M & L for rendering 15mm thick in cement mortar 1:4 on brick/ stone surfaces finished even smooth with spong finish all as specified and directed

M & L for preparation of newly plastered surfaces of external wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed

M & L for complete removal of existing treatment of old walls and of any description and applying two coats of oil bound distemper over one coat primer over 2mm thick wall care putty complete all specified and directed.

M & L for preparation of old plastered or unplastered surfaces of wall by brooming / wire brushing / removal of loose scales / dusts / unwanted particles by mechaincal means and applying two coat of cement based paint complete all as directed and specified.

M&L for PCC type B1 1:2:4 (using 20mm graded aggregates) as in lintel upto 1.50 Mtr clear span, window cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete.

M & L for 75mm thick PCC (1:3:6) type C-2 (using 20mm graded aggregate) as in plinth protection finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

Dismantling of battens for tiles, shingles etc, of any size and description spaced exc 15 cm including tiling fillets complete all as specified and as directed.

Dismantling of timber scantlings unframed as in fillets, rails, posts, rafters, purlins, etc. cross sectional area less than 40 sqcm in un-framed work complete all as specified and directed.

M&L for MS structural steel work, framed as in trusses, purlins, rafter, post etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete all as directed.

Dismantling CI work of any description and any position complete all as directed.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / walls including stack clamp of suitable size complete all as specified and directed .

All as per item No 58 above but 75mm bore

S & F PVC (SWR) bends any radius , dminishing pieces or tapers (lrger bore measured) fittrd with oval access door 110mm bore dia all as directed .

All as per item No 60 above but 75mm bore

S & F PVC (SWR) Branch piece double (double 'Y') equal or unequl 110mm dia with door access complete all as specified and directed .

All as per item No 62 above but 75mm bore

S & F PVC (SWR) Nahani trap 75mm bore with SS grating with or without holes incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed .

S & F PVC (SWR) gully trap 150 x 100 square or round mouthed, type P incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed.

S & F PVC (SWR) vent cowl 110mm bore dia as required complete all as directed.

S & F PVC (SWR) vent cowl 75mm bore dia as required complete all as directed.

S & F 110mm bore PVC (SWR) junction, (double T), equal or unequal with access door complete all as directed.

S & F PVC (SWR) Couplers 110mm bore dia complete all as directed.

S & F PVC (SWR) Couplers 75mm bore dia complete all as directed.

S & F in repair grating round 125mm dia with or without hole CP brass chromium plated complete all as directed.

Supply and Fix rotational moulded polythylene water storage tanks, 500 Ltrs capacity, (Cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old broken/damaged PVC water tank complete all as specified and directed.

S & F in repairs 20 mm bore ball brass valves high pressure with polythene float and fly nut , screwed for iron pipe complete all as specified and directed.

Supply and fixing in repairs 20mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/fan /tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ ceiling rose/ light fittings, MCB etc. and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified.

Taking down the existing unserviceable main switch/DBs of any type / capacity / description as existing at site including MCCBs of any type and capacity and making good the disturbed surfaces to match with the existing finishes all as specified.

Taking down ceiling fan of any sweep keeping with safe custody and refixing the same with replacement of unsv 3 core PVC insulated PVC sheathed 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal over hauling/Servicing the fan complete including fan hook/clamp/ nut/ bolts/washers and spray painting with one coat of synthetic enamelled paint including filling cavities with filler, one coat after cleaning all dust etc all as specified and as directed.

M & L for Point wiring using colour coding as per IS with 1.5 Sqmm multistranded copper conductor single core FRLS PVC insulated unsheathed 1100 Volts, ISI-694 marked drawn through and including concealed conduit in wall /roof/ floor along with suitable feetings, with modular MS sunken boxes of 1.6 mm thick, of suitable size including modular cover plate/frame for housing modular switches/sockets ISI marked along with1.5 Sq mm copper conductor FRLS, PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for the following : Note - (i) Making good of distrubed surfaces matching with the surrounding will be done by contractor without any extra cost (ii) Cutting in chases and pointing in will be done by contractor without any cost.

(a) One light point controlled by one, one way switch.

(b) One ceiling/ exhaust fan point controlled by one, one way switch.

(c) One three pin 5 Amps socket outlet point controlled by one, one way switch on same board.

(d) One three pin 5 Amps socket outlet point controlled by one, one way switch on independent board

All as per Item No. 82 above but with stranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent board, including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly complete all as specified.

S & F modular switch 6 Amps SP one way 230 Volts white / ivory finish complete all as specified.

S & F modular switch 16 Amps SP one way 230 Volt white / ivory finish complete all as specified.

S & F modular socket outlet 2/3 pin 6 Amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified.

S & F modular socket outlet 2/3 pin 16 Amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified.

S & F for ceiling rose 2/3 terminals, PVC polycarbonate, isolated body ISI marked complete all as specified.

S & F Modular type stepped electronic fan regulator, 1 to 5 steps all as specified & directed.

Supply and fix LED Tube light fittings Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with industrial grade heavy duty driver 20 Watt LED complete including all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector including dismantling old tule light fittings including dismantling old tule light fittings all as specified & directed.

Supply and fix LED Tube light fittings 2' x 2' sleek ofcapacity 28 watt environment freindly, new generation , aesthetically designed , ultra modern recess mounting luminaire with high brightness SMD LEDs as light source 230 Volts complete with including all accessories internally pre-wired and necessary mounting arrengement with including connecting up with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector including dismantling old tule light fittings all as specified & directed.

S & F LED energy efficient street light fitting 30 Watt LED pressure die cast aluminium housing in heat resistant glass covered with IP-66 protection and including GI pipe as required length and size with fixing accessories complete including dismantling old tule light fittings all as specified and all as directed .

S & F for MCB DB SPN sheet metal enclosure, 8 way with 200 Amps rated bus bar double door, fixed on wall good to disturbed surfaces, and connecting with existing cable complete all as specified.

S & F for MCB double pole, rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, C-curve complete all as specified.

S & F for MCB Single pole, rated capacity 6 to 32 Amps, 240 Volts breaking capacity 10 KA ,C- curve complete all as specified.

M & L for Sub main wiring with 2 runs of single core 4 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor drawn through non-metallic 20 mm PVC rigid, ISI marked and its accessories duly in PVC Casing & Caping on wall/ roof including one run of single core 4 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor cable as earth continuity conductor complete including taking down old submain wiring all as specified. Note:- Two run of 4 sqmm conductor & one run of 4 sqmm conductor and one run of PVC Conduit will be measured as on RM

M & L in replacement for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Part - I including RCC cover and MS angle iron frame, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete Note:-GI earth wire and protection pipe beyond 7.5m will be measured and paid separately

Parhar Enterprise