Renovation/Addition Alteration of Sher - I - Kashmir Indoor Sports Complex, Srinagar by way of electrification.

Amount

Electrification Providing and fixing of LED 6W or close to 6 watts bush lights IP66 with die alinium housing with toughened glass Halonix /Philips/Jauguar

Providing and fixing of LED 150W or close to 150 watts Flood lights high efficient LED Flood light with lense made of pressure die cast Aluminium Housing, Extruded Aluminum Heat sink and enclosed with toughened glass IP66 Halonix /Philips/Jauguar

Providing and making of cement concrete blocks for the 3 M cast iron pole made up of cement concrete 1:2:4 of 18’’ dia 2’ deep

Rewiring,renovation of existing poles in parking area by way of supply and installation of 20 watt LED PVC Globe with die cast aluminum spigot and prism diffuse IP65 and b

providing and fixing of control gear box made out of sheet steel 16 SWG fitted with connector and 6ampsMCB of legrand make complete job.

Supply, installation, testing and commissioning of G.I poles of 4 inch dia with tilted bracket for mounting of 4 no of light fixtures on each pole as required. Design (as per approved sample) with 15’’ base ( 3 meters ) high , pre built in control gear box fitted with connector and 6 amp MCB of legrand make .

Providing and fixing of LED 200 watts or close to 200 watts Flood lights (Halonix CWL/Philips/Jauguar

Design, fabrication, assembling, supply, installation, testing and commissioning of MAIN FEEDER PILLAR suitable for 415 V, 3 phase, 50 Hz, 4 wire power supply system.with 100 amps Al bus bar 3 phase as per system requirement for main panel n single phase for feeder panels.Panels shall be fabricated out of 2 mm thick CRCA sheet steel in cubical formation, compartmentalized in Form 3b Construction, floor mounted, free standing and shall be dust and vermin proof. 3 mm thick cable gland plate, shall be provided both at the top and the bottom of the panel.(double door)lockable.I)20cft panels. ( out door type)

P/F MCCB 160Amps 4 Pole 36 KA . Legrand/ABB/Siemens make.

P/F MCCB 100Amps 4 Pole 25 KA Legrand/ABB/Siemens make.

P/F Outgoing :MCCB 63 Amps TPN Legrand/ABB/Siemens make.

Design, fabrication, assembling, supply, installation, testing and commissioning of SUB MAIN FEEDER PILLAR suitable for 415 V, 3 phase, 50 Hz, 4 wire power supply system.with 100 amps Al bus bar 3 phase as per system requirement for main panel n single phase for feeder panels.Panels shall be fabricated out of 2 mm thick CRCA sheet steel in cubical formation, compartmentalized in Form 3b Construction, floor mounted, free standing and shall be dust and vermin proof. 3 mm thick cable gland plate, shall be provided both at the top and the bottom of the panel.(double door)lockable.I)25cft panels. ( out door type)

MCCB 63Amps 4 Pole 25 KA Legrand/ABB/Siemens make.

P/FOutgoing :MCB 63 Amps TPN Legrand/ABB/Siemens make.

P/F MCB 40Amps TPN Legrand/ABB/Siemens make.

P/F MCB 63 Amps DP Legrand/ABB/Siemens make.

Design, fabrication, assembling, supply, installation, testing and commissioning of FEEDER PILLAR suitable for 415 V, 3 phase, 50 Hz, 4 wire power supply system.with 100 amps Al bus bar 3 phase as per system requirement for main panel n single phase for feeder panels.Panels shall be fabricated out of 2 mm thick CRCA sheet steel in cubical formation, compartmentalized in Form 3b Construction, floor mounted, free standing and shall be dust and vermin proof. 3 mm thick cable gland plate, shall be provided both at the top and the bottom of the panel.(double door)lockable.I)(2’.6”x2’x1’)=5cft feeder panels( out door type)

P/F of MCB 20 Amps DP Legrand/ABB/Siemens make.

P/F of MCB 32 Amps DP Legrand/ABB/Siemens make.

P/F of MCB 2 pole 63 amp of Legrand/ABB/Siemens make.

P/F of MCB 4 pole 63 amp of Legrand/ABB/Siemens make.

P/F of MCB 4 pole 40/ amp of Legrand/ABB/Siemens make.

MCCB 100Amps 4 Pole 25 KA Legrand/ABB/Siemens make.

P/F of MCB single pole c curve 16/10amp of Legrand/ABB/ Siemens make.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. A) upto 35 sq. mm

Above35 sq. mm and upto 95 sq. mm

Above95 sq. mm and upto 185 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. A) 3.5 Core 120sqmm

3.5core 95sqmm

3.5core 70sqmm

4core 25 sqmm

4core16sqmm

2core16sqmm

2core10sqmm

Supplying of cables for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. A) 3.5 Core 120sqmm

3.5core 95sqmm

3.5core 70sqmm

4core 25 sqmm

4core16sqmm

2core16sqmm

2core10sqmm

Earthing with G.I Earth Plate 600mmx600mmx6mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc with charcoal / coke and salt as required

Providing & laying of 25mmx5mm G.I strip for earthing in 40mm dia pipe earth Electrode including connections with brass nuts,bolts spring washers etc,excuvation,refilling as required

Providing & laying of 8 no SWG G.I wire for earthing along with cables including connections with brass nuts,bolts spring washers etc,excuvation,refilling as required

Internal Electrification Wiring for light point / Fan point / Exhaust fan point / call bell poin with 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface / Recesed medium class PVC conduit with modular switch,modular base/ Cover plate suitable G.I box and earthing the point with 1.5sqmm FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for light plugs with 2 x 2.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 no 2.5 sqmm FRLS PVC insulated copper conductor single core cable for loop earthing as requierd.

Wiring for power plugs with 2x4qmm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit along with 1no. Of 4 sqmm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuits/submains alng with Earth wire with the following sizes of FRLS PVC insulated copper conductor single core cables in surface / recessed medium class PVC conduit as required. A) 2x2.5sqmm + 1 no.2.5sqmm pvc insulated copper conductor for Earthing

2x4sqmm + 1 no.4 sqmm pvc insulated copper conductor for Earthing

2x6 sqmm + 1 no.6 sqmm pvc insulated copper conductor for Earthing

4x10sqmm + 2 no.6 sqmm pvc insulated copper conductor for Earthing

Supply and fixing of 3 pin 5/6 amp modular socket outlet with shutters and 5/6 amp modular type switch with indicator type including connections and civil work exluding G.I box but including cover plates

Supply and fixing of 3 pin 15/16 amp modular socket outlet with shutters and 15/16 amp modular type switch with indicator type including connections and civil work exluding G.I box but including cover plates

Design,fabrication,assembly, supplying and fixing in position, testing and commissioning of the following 16 SWG sheet metal enclosed wall mounted/fully recessed in wall indoor cubical type, with dust proof, powder coated, hinged and lockable doors, complete with interconnections with copper wires, tapes, cable glands, bonding to earth. (Double shutter DB’s) A) Sheet metal enclosed 8way TPN complete with neutral link

Sheet metal enclosed 6way TPN DB MCB complete with neutral link

Sheet metal enclosed 4way TPN DB complete with neutral link

Sheet metal enclosed 12way SPN DB complete with neutral link

Supply and fixing of 6-32Amp SP 240V " C " series miniature circuit breaker ( MCB) suitable for lighting and other loads in the existing MCB DB"s complete with connections,testing & commissioning ets as per technical specifications

Supply,installation,testing and commissioning of following rating Four pole MCB"s with breaking capacity of 10KA as per IEC 60947-2 and as per the satisfaction of Engineer incharge A) 63-40 Amps TPN

Supply,installation,testing and commissioning of following rating Double pole MCB"s with breaking capacity of 10KA as per IEC 60947-2 and as per the satisfaction of Engineer incharge A) 63-40Amp

Supply,installation,testing and commissioning of Ceiling fans ( crompton greaves High Breez or approved equivalent ) complete with double ball bearig,motorbearing,r,blades,down-rod canopies capacitor two module stepped type electronic fan regulator suitable for operation on 230V 50HZ 1-phase A.C supply complete as required A) 1200 mm SWEEP

Supply,installation,testing & commissioning of 900 RPM 300mm ( Crompton Greaves trans Air or approved equivalent ) Exhaust Fan suitable for single phase 230v 50HZ AC supply Complete with motor louvers,shutters etc complete as required

Supply,Installation,testing and Commissioning of Cubical type L.T Panel board suitable for 415V 3phase 4wire 50HZ AC supply system including incomers,outgoings,bus-bar,interlocking etc,dust & vermin proof with lockable arrangement powder coated INCOMERS MCCB 250 Amp 4 Pole with breaking capacity 36 KA 1N0 Digital multifunctional-meter 1 no Indicating Lamps ( RYB ) 1 set Current-Transformer ( 300/5A 10VA burden) class-1 1set Aluminium bus-bar 300 Amp FP E-91 Electrolutic AL 1sets.200A change over switch Panel Mount :1 No. Out-Goings MCB 63 Amp DP with Breaking capacity 10 KA 12 Nos MCCB 63 Amp TPN with Breaking capacity 10 KA 8 Nos Load Bearing Member to be made out of 2.0mm CRCA Sheet Partition to be made out of 1.6mm CRCA Sheet Gland Plates to be made3.0 mm thick Complete job

Earthing with G.I Earth Plate 600mmx600mmx6mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc with charcoal / coke and salt as required

Providing & laying of 25mmx5mm G.I strip for earthing in 40mm dia pipe FRL earth Electrode including connections with brass nuts,bolts spring washers etc,excuvation,refilling as required

Wiring for Flood Lights points in 2.5sqmm +1x1.5sqmm FRLS copper wire in 25mmDia PVC conduit from sub board controlled by 10 amps MCB looped in 2 no of flood lights ie 2 no of lights on one MCB complete as required.

Supplying/installation/testing and commissioning of surface Mounted 40W LED tube light IP 65 4 feet or close to 40w fitting complete as required. Halonix /Philips/Jauguar

Supplying/installation/testing and commissioning of 12 watts or close to 12 watts surface Mounted dome shaped LED light fitting complete as required Halonix /Philips/Jaquar

Supplying/installation/testing and commissioning of surface Mounted 40w LED light fitting complete as required Halonix /Philips/Jauguar

Supplying/installation/testing and commissioning of FLOOD LIGHTS 210 watts or close to 200 watts LED light fitting complete as required Halonix CWL/Philips/Jaquar

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. A) Above 95 sq. mm and upto 400 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. A) 3½ X 300 sq. mm

Supplying of cables for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.A) 3½ X 300 sq. mm

Supply and laying of following dia PVC Conduit B class 2 mm thick along with accessories recess/ surface including cutting of walls and making good the same A) 25mm dia

32mm dia

M/S MUSHTAQ ENTERPRISES

M/S SHAH ELECTRICALS and MECHANICAL WORKS

M/S INTERNATIONAL STORES

M/s AHKHAN ENTERPRISES

M/s UMEED ENGINEERS

Elevees Infrastructure Private Limited

M/S BHAT ENGINEERING

M/S IMPEL ENGINEERS AND CONTRACTORS

Black and white electrical and suppliers

WANI CONSTRUCTIONS

M/S SWIFT ELECTRONICS