04/EWCL/2024-25

Amount

Safe loading, carriage and unloading & proper stacking of following store materials from any Electy. Store of Lucknow Zone to 33/11 KV S/S Chhauchh, Lakhmipur site (work site).

Cost of 33 KV line Isolator

Cost of 33 KV Bus Isolator

Cost of Post Insulator

Cost of 33 KV Lightening Arrester

Cost of 33/11 KV 05 MVA Transformer

Cost of 33 KV VCB 800 Amp., 750 MVA

Cost of 33 KV CT 400/200/1 Amp.

Cost of 33 KV CT 200/100/1 Amp.

Cost of 33 KV Single T/F Control Pannel with structure.

Cost of 33 KV Single Feeder control pannel

600/300/5 AMP, 350 MVA Incoming

200/100/5 AMP, 350 MVA Outgoing

Bus Coupler,350 MVA

11 KV 3x300 SQ MM XLPE

11 KV 3x185 SQ MM XLPE

11 KV 3x70 SQ MM XLPE

R.S. Joist 100x116mm 8.23Mtr. Long 4 No Pieces 32.92m @ 23.00 Kg./Mtr.+wastage. for T.G.

R.S. Joist 150x150mm 6.4 Mtr. Long 4 No Pieces Total 25.6 Mtr. @ 37 kg/M+wastage for Bus Bar Gantry

MS Channel 125x65, 3.2Mtr. Long 1,2,3,4 No Pieces for Top channel. 13.10 Kg/Mtr.+wastage.

MS Angles 50x50x6mm for bracing type members of T.G./B.G./Trench

MS Angles 75x75x8mm (2.6 Mtr.Long, total [email protected] kg/mtr)

MS Angles 75x75x6mm (6.8 Kg/Mtr.) for Neutral/Cable Stand

MS Round of 32 mm dia for earthmat (6.1 Kg/Mtr.)

ACSR Dog conductor for jumpers

ACSR Panther conductor for bus bar

Cost of ACSR Panther Conductor

11KV Polymeric Disc Insulator B&S 7000 Kg

33 KV Disc fitting for Dog/Panther conductor

33 KV Polymeric Pin Insulator With Nut & Washer

PCC Pole 8.5m long.

LT ABC conductor (3x50+1x35+1x16)

Rail Pcs of 90 Lbs 3.46M long 2 No. Pcs 6.92M @ 44.61 Kg./M

MS Channel 100x50 mm (9.6 Kg/Mtr.) for Cable Stand

MS Channel 100x50x2028 mm (Dropper for Fuse Set)

MS Channel 100x50x2240m Top Channel

MS Channel 125x65x2240mm (Top)

MS Angle 40x40x5 mm (3.0 Kg/Mtr)

11 KV Polymeric Disc Insulator T & C type 4500 Kg.

11 KV Disc fitting T & C type 4500 Kg.

MS Channel 125x65x1300mm Tee Off

11 KV Polymeric Pin Insulator

11/0.4 KV, 63 KVA Transformer

MS Channel 100x50x2028m for TPMO

MS Angle 75x75x6mm 2028 mm with clamp ,bolt & nut (TF base)

Earthing of pole by MS Earthing rod 20x2500 mm & 6 SWG earthing wire etc Complete

11 KV XLPE cable 3x70mm

MS Angle 65x65x6mm 2028 mm Mtr long for cable hoisting support

Stay Complete

11 KV 3x300 SQ MM XLPE Cable Outdoor

11 KV 3x300 SQ MM XLPE Cable Indoor

11 KV 3x185 SQ MM XLPE Cable Outdoor

11 KV 3x185 SQ MM XLPE Cable Indoor

Single Core PVC Cable, 1x240 sq.mm.

11 KV 3x70 sq.mm Cable jointing kit I/D

11 KV 3x70 sq.mm Cable jointing kit O/D

Construction of Toe wall around the outdoor Switchyard of the S/s of size 0.75 Mt.At Base and 0.23 Mt. At top as per RESSPO Norms by lst class bricks in the ratio 1:6, Base concreting of the wall to be done in ratio 1:6:12 and plaster 12 mm thick in ratio 1:4.(All materials to be provided by Contractor).

Fabrication of switchyard fencing with wire chain link fencing mesh D fensing of as per drawing along with Fabrication of one number gate made of MS Angle, MS Channel, MS Flat together with locking arrangement, its Installation including the cost of civil material, angle 50x50x6mm.(All materials to be provided by Contractor).

EARTH MAT Laying of earth mat in the switchyard by laying of M.S. Round of 32 mm dia in 500 mm deep trenches with M.S. Round 32mm dia,3Mtr. Long earth electrodes as per drawing. The work includes welding of the M.S. Round, connecting all steel structures in the switchyard with the earth mat by means of G.I. strips of size 50x6mm as per item below. (M.S. Round bar 32mm provided by Department )

Excavation of earth for laying mat

Driving of earth electrode.

Laying of earthmat (M.S.) Bar including cutting, shaping and binding etc)

Preparation of joints, proper making and welding; of main earthmat bar joints and applying, bitumen impregnated Paint on joints i.e. End Joints. Cross Joints, Lap Joints.

Welding of riser strip with earthmat and department structure body (One set means one riser strip welding to main equipments).

Plinth of 5MVA 33/11KV T/F: Construction of plinth of size 3.46 x4.46 Mtr. For 5MVA T/F having 0.4 Mtr. above ground level. The work includes excavation of foundation, base concretion of CC 1:4:8 ratio (cement, fine sand & brick ballast) first class brick work in cement morter of rtio1:4 foundation CC in 1:4:8 ratio(cement, find sand & brick ballast) and RCC work in ratio 1:2:4 (cement, coarse sand and stone grit of 20mm gauge using MS bar of 10mm dia(tor) in reinforcement including its cutting, bending & binding in required shape. The work also includes laying of 2 No. 3.46 mtr. long rail pieces complete with cutting, welding & proper fitting etc. The plinth will be made as per drawing and shall be plastered/ finished on top and sides of the plinth.(All decentrlised materials to be provided by Contractor).

Fabrication, Errection & Grouting of Substation Structure:

Terminal Gantry and 33KV main Bus Bar Structure- Fabrication, erection, & grouting of gantry using rail pole and channel as per RESPO Drg. No. RES- 38.(All decentralised materials to be provided by Contractor).

Isolator Structure: Fabrication of Isolator Structure 3.5 mtr in height as per Drg. digging of two no. pits of size 1.075x0.9x0.3 mtr. providing Stone Pad at the bottom of the pit and grouting of two legs of the isolator structure in CC(cement coarse sand and stone grit of 20mm gauge) of the ratio 1:4:8 in block of 1.075x0.3 mtr. including all civil material, T&P complete in all respect. The work includes dragging, shifting up to 40 Mtr., raising and erecting the two legs with runner on proper alignment and level and plumb. Both plinths of the isolator structure shall be properly finished with smoothing of edges.(All decentralised materials to be provided by Contractor).

Lightening Arrestor, Post Insulator,Fuse Set & CT Structure : Fabrication of Lightening Arrestor, P.I. & CT Structure 3.5 mtr. in height as per Drg. digging of two no pits of size 1.075x0.9x0.3 mtr. providing stone pad at the bottom of the pit and grouting of two legs of the Structure in CC(cement coarse sand and stone grit of 20mm gauge) of the ratio 1:4:8 in block of 1.075x0.3 mtr. including all civil material, T&P complete in all respect. The work includes dragging, shifting up to 40 Mtr., raising and erecting the two legs with runner on proper alignment and level and plumb. Both plinths of the structure shall be properly finished with smoothing of edges. (All decentralised materials to be provided by Contractor).

Plinth of VCB : Construction of Plinth of size 2.0 mtrx1.5mtrx0.9mtr. suitable for erection of upper structure of 33KV VCB including grouting of anchor bolts in proper alignment and level. Scope of work includes excavation of foundation base and concreting in CC 1:3:6 (cement, find sand & stone grit) 1st class brick work in cement mortor ratio 1:4:8.(All decentralised materials to be provided by Contractor).

Erection and installation of 33/11KV 05 MVA T/F

Erection and installation of 33/11KV 05 MVA T/F in a levelled position of the plinth. The work includes shifting of T/F to the site & installation within the S/S premises, assembling, fixing and fitting of all accessories with required packing and filling of T/F oil upto desired level. Ensuring that there is no leakage and all jumpering & connection are included in the scope of work.

Earthing for power T/F by way of boring and lowering of 40mm dia, 2.9 mm thick GI Pipe B class from ground upto the water level (minimum 60 feet deep) as per standard practice as per RESPO/REC Drg with making of earth pit of 300x300 mm & 1 feet deep with Cover. (All materials to be provided by Contractor).

Fabrication and grouting (1:4:8) of MS Channel 100x50mm in L Shape & in proper size and alignment to provide support through GI earthing strips (50x6)mm size for power transformer neutral including supply & fixing of flexible copper bonds for neutral earthing as per RESPO Drg. (All decentralised materials to be provided by Contractor).

Fabrication and erection of cable support made of two pieces of MS channel 100x50mm, 3.0 mtr. long joined to each other by means of 5 no. MS Flat 50x6mm pieces of size 150mm long each by welding at equal intervals as per drawing and grouting in block of size 300x300x700mm (1:4:8) complete. This includes providing of required MS Clamp made of MS Flat holding the cable including nuts & bolts and fixing of XLPE cable .(All decentralised materials to be provided by Contractor).

Installation of Isolators: Assembling and installation of line/ bus isolator on the isolator structure adjusting of opening mechanis in proper alignment so as to ensure smooth operation of the same. In case of line isolator proper operation of earth links shall also be ensured. The work includes fabrication & proper connection with earthmat/earthing by G.I. earth strip 50x6mm proper fixing if required (All decentralised materials to be provided by Contractor).

Installation of P.I. & Lightening Arrestors : Assembling, installation & mounting of 3 No.(1set) L.A. & Post insulator on the L.A & P.I. Structure/complete with making earth connections (separate) with GI Strip 50x6mm. The work includes fabrication for fixing if required. (All decentralised materials to be provided by Contractor).

Installation of CT: Installation of 3 No.(1 set) CT on the CT Structure along with CT Junction Box. The work includes fabrication, proper fixing of C.T. with making earth connections(Earth Mat/earthing) with GI Strip 50x6mm and control wiring connection, proper commissioning & testing.(All decentralised materials to be provided by Contractor).

Installation of VCB: Installation of 33KV VCB complete work with making earth connections(Earth Mat/earthing) with GI Strip 50x6mm including control wiring, commissioning & testing (All decentralised materials to be provided by Contractor).

Installation of Switchgears in Control Room:

Shifting carefully & installation safely 11KV I/C & O/G switchgears from outside the switchgear room placing and fixing of switchgear on foundation providing G.I. Bolt & Nuts of proper size in proper position and alignment. This includes checking, complete work with mounting of P.T. on incoming S/G with proper testing, connetion of earthing & commissioning of switchgears.

Fixing and making Bus Bar connections in between all switchgears after cleaning and tapping with H.T. Tape, empire tape and PVC tape properly, providing and fixing of 6 mm thick Bakelite separators and plugging of all opening & holes with plastic compound complete work as per required.

Shifting carefully and installation of 33KV Single Transformer Control Panel in Control Room including fixing, bolting & grouting of above as per required and testing, commisioning complete work as per required.

Shifting carefully and installation of 33KV Single Feeder Control Panel in Control Room including fixing, bolting & grouting of above as per required and testing, commisioning complete work as per required.

Earthing of 11 KV, 33 KV Switchgears & Equipment: Earthing of 11 KV, 33 KV Switchgears equpiment by lowaring and boring of Chemical Earthing outside of switchyard and connecting through G.I. Strip 50x6mm with indoor/outdoor equipments with making of earth pit of 300x300 mm & 1 feet deep with Cover. (All the material provided by the contractor)

Painting of all structures and equipments with good quality ISI Mark one coat of red oxide primer & two coats of Aluminium Paint. (All materials to be provided by Contractor).

HT Cable Laying :

Laying & dressing of 11KV 3x300 Sq.mm XLPE cable from 5MVA T/F to 11KV incoming Switchgear by excavation of trench in the ground of size 450mm wide, 900mm deep providing 150mm fine sand cushion below the cable. The cable shall be duly protected by bricks, sand & stone slab and refilling & ramming of the left out soil. Spare cable shall be left and buried in the trench in the shape of rings at both ends. Cable laying work includes unrolling, cutting, making ring and sealing both ends of the cable. (All decentralised materials to be provided by Contractor).

Laying & dressing of 11KV 3x120 Sq.mm XLPE cable from 11KV O/G Switchgear by excavation of trench in the ground of size 450mm wide, 900mm deep providing 150mm fine sand cushion below & above the cable. The cable shall be duly protected by bricks, sand & stone slab and refilling & ramming of the left out soil. Spare cable shall be left and buried in the trench in the shape of rings at both ends. Cable laying work includes unrolling, cutting, making ring and sealing both ends of the cable. (All decentralised materials to be provided by Contractor).

Hoisting of 11KV Cable with 100 mm dia 3 Mtr. long GI Pipe on the feeder cable before mounting the cable on the double pole, lifting, mounting and clamping of 11KV feeder cable boxes on the feeder double pole structure and making connection including supply of cable mounting clamps. The work includes the sealing of GI Pipes, lower end of the pipe is to be buried into the earth by about one foot.(All decentralised materials to be provided by Contractor).

Hoisting of 11KV XLPE Cable for 11 KV switchgears & 33/11KV T/F of requried size.

33 K.V. SECTIONAL BUS BAR AND STRINGING : Stringing of 33KV bus bar using of ACSR Panther Conductor including fixing of Disc insulators. Strings and tension fitting complete with sagging of bus bar etc. and making vertical/Horizontal jumper connection through PG Clamps and connecting all the equipments with each other through connecting clamps. Work includes all the jump ring from terminal gantry to bus bar and from bus bar to transformer (1no. T/f bay's)

Construction of Control Cable trench of size 300x300mm including brick work 1:4 in wall of the trench, brick ballast work in 1:5:10 on foundation plaster 12mm thick with coarse sand 1:4 and surface finishing with cement, providing MS Strip at an interval of 0.5 Mt. and MS Angle (25x25x5mm) running on both the edges of trench. (All decentralised materials to be provided by Contractor).

Construction of welded frame type control cable trench cover 0.5 Mt. long suitable for trench including cost of MS/Tor Bar.(All decentralised materials to be provided by Contractor).

Supply and laying of following size Copper Control Cable through underground/cable trench/trenching SGR interlinking through proper connections to T/F Control panel/protection board/Battery and Battery Charger/Bunch joints, Relay 33/11KV T/F junction Box/33KV VCB, CTs etc. as per site conditions:

2x2.5 Sq.mm

4x2.5 Sq.mm

6x2.5 Sq.mm

Supply and fixing of Control Cable Trey

Fixing of Single Core PVC Cable, 1x240/400/630 sq.mm. & fixing between Transformer incoming 3x300 Sq.mm XLPE Cable and Transformer 11 KV/LV Side Bushing connector for reducing of tension at LV Side Bushing.

Supply and Installation of 24 Volt Battery and it charger with connections to existing control circuit complete in all respects.

Supply and fixing of Rubber mat 8/10mm, 2x4mtr.

Double Support for Outgoing Feeder on 8.5 mtr PCC Pole with complete all accessories.(11 KV TPMO, 11 KV Fuse set with clamps to be provided by Contractor)

Double Support for 63 KVA Transformer on 8.5 mtr PCC Pole with complete all accessories.(11 KV TPMO, 11 KV Fuse set with clamps to be provided by Contractor)

Erection of 63 KVA Transformer on Double pole support with clamps nut ,Bolts etc and proper testing and commissing. (All decentralised materials to be provided by Contractor).

Erection of 8.5 Mtr.PCC Pole after excavation of earth in any type of soil and grouting of CC in ratio 1:4:8 (cement coarse sand & brick ballast) as per RESSPO Drg. With plinth.(All decentralised materials to be provided by Contractor).

Fixing & supply of 40 watt. LED street light complete fitting and of standard quality ISI markwith water light fittings, elbow etc. complete in all respect and suitable for above supports.(All materials to be provided by Contractor).

Supply & Laying of 3.5 x 70/35 Sq.mm PVC LT cable from 11/.04 kv,63KVA T/F to LT Distribution Board in switchgear room after digging the trench, laying cable and refilling of trench including connection at both ends after providing and crimpling of lugs of proper size, complete work.(All materials to be provided by Contractor).

Supply and laying of 2x6 sq. mm. aluminum cable from S.G. room to street light supports after digging of trench, laying of cable, providing a brick on top of cable , refilling of trench, making connections at poles with street light fittings, complete in all respect.(All materials to be provided by Contractor).

Soil filling of yard

Cost of Yard Leveling and Brick of Edge Bar

Providing of fire buckets stand ( Hut Type) made of M.S. Angle 50x50x6mm as per drawing with fabrication and grouting and painting by post office red paint and letter writing etc. complete including the cost of fire bucket-6 Nos. in the switch yard of the sub-station filled with Ganga sand.

PART- B (33 KV LINE)

Safe loading, carriage and unloading & proper stacking of following store materials from any Electy. Store of Lucknow Zone to 33/11 KV S/S Chhauchh, Lakhmipur site (work site).

ST Pole 11 Mt Long-SP-55

ST Pole 13 Mt Long-SP-70

ST Pole 11 Mt Long-SP-55- For Stud Pole

9 Mt. Long PCC Pole

9 Mt. Long PCC Pole for Stud Pole

V-type cross arm 100x50x6 mm, MS Channel 9.6 Kg./mtr

Polymeric 11 KV Disc Insulator B&S. Type 70 KN.

Disc Fittings Dog/ Racoon 70 KN.

Polymeric 33KV Pin Insulator

M.S. Angle Iron 65x65x6mm, 4300 mm long 2/6/8 no. Bracing, with 4/12/16 clamps (5.8 kg./m)

M.S. Angle Iron 65x65x6, 3200mm long, 5.8 Kg/Mtr. for cable with clamp

Top channel 125X65mm, 3200 mm long (13.10 Kg./m) with clamp

GI wire 6 SWG for guarding along the line

GI wire 8 SWG for guarding a cross the line

Guarding Angle 75x75x6mm (3500/2200 mm long)

Earthing complete

Complete Stay (GI Stay rod 20x1800 mm, Stay 7/8 SWG 10 Kg.)

ACSR Dog Conductor

33 KV XLPE Cable 3x300 sq.mm.

33 KV XLPE 3X300 sq.mmm C/J/Kit (Outdoor)

Erection of the following support including cutting, making holes, fixing of all types of accessories digging pits complete in all respect as per RESSPO drawing. All type of clamps nut & bolt, washer to be provided by contractor.

33 KV Single support of PCC Pole 9mtr long.with X Arm, Pin insulator & other all accessories

33 KV Single support of ST Pole 11mtr long.with X Arm, Pin insulator & other all accessories

33 KV Single support of ST Pole 13mtr long.with X Arm, Pin insulator & other all accessories

33 KV Section Double pole structure on PCC Pole 9mtr long complete with Top Channel,bracing.& other all acessories

33 KV Section Double pole structure on S.T. Pole 11mtr long complete with Top Channel,bracing.& other all acessories

33 KV End Type Double pole structure on S.T. Pole 11mtr long complete with Top Channel,bracing.& other all acessories

Four Pole structure on ST Pole 11mtr long complete with Top Channel,bracing.& other all acessories

Tri Pole structure on PCC Pole 9mtr long complete with Top Channel,bracing.& other all acessories

Tri Pole structure on ST Pole 11mtr long complete with Top Channel,bracing.& other all acessories

Stud Pole Suport on ST Pole 11mtr long complete with all acessories

Stud Pole Suport on PCC Pole 9mtr long complete with all acessories

Erection/fixing for 33 KV Stay set with stay wire 7/8 SWG and clamp as per RESSPO drawing including binding, clambing, clamping, tightening, and nozzeling etc. complete in all respect including its grouting in ratio 1:4:8 of cement, sand and stone grit (RCC) and sand before back filling of the pits as per RESSPO schedule all clamps, nuts & bolts, cement, brick, concrete blast and etc would be provided by contractor.(Stay Set , Stay wire to be provided by Dept.)

Concreting of supports in 1:4:8 ratio and plinthing of supports upto 300mm above ground level by using cement, stone grit (RCC) and corase in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing.All matrial would be provided by the contractor.

Laying and sagging of 3 phase ACSR Dog conductor from Double pole uptogantry at 132 KV substation / 33KV substation including jumpering, hoisting, fixing of all type of insulators, binding, jointing and its clamping etc. in all respect.

Earthing of supports with Earth Electrode 2.5 mtr. length including excavation of pit and driving M.S. Rod upto proper depth and connecting the earth electrode with the help of 6 SWG G.I. Wire and earthing lugs. RESPO/ RES. drawing.Earthing of each section pole is also to be done. All type of nut & bot would be given by the contractor.

Cradle type Guarding of HT/LT/Telephone line/ road/river crossing etc. by providing GI wire No. 6/8 and making net with difference of 1.00 Mtr. Completely including fixing of channel/angle etc. with proper locking at each support. All type of nut bolt ,clamp to be provied by the contractor.

Painting of following supports with one coat of red oxide primer and two coats of aluminum white paint of ISI mark and top danger portion of each support must be painted by providing two coat of Post Office Red Paint (1.5mtr upper portion of support.) Paint and material would be given by contractor to complete of job.

Single Pole of 11 M S.T.P

Single Pole of 13 M S.T.P

Double Pole of 11 M S.T.P

End Type Double Pole of 11 M S.T.P

Four Pole of 11 M S.T.P

Tri Pole of 11 M S.T.P

Stud Pole of 11 M S.T.P

Providing & Fixing of 33 KV SMC Danger board ( as per GTP)with Clamp & Nut Bolt

Providing & Fixing of 33 KV SMC Number Plate ( as per GTP) with Clamp & Nut Bolt

Providing & Fixing of G.I. Barbed wire (2 Kg./pole)

Providing & Fixing of Stone Pad (300x300x75 mm)

Cable Laying by Digging method of 3x300 Sqmm 33 KV, XLPE insulated U/G Cable single circuit below minimum 1.5 mtr. Depth from ground level.(M.S..Pipe to be provided by contractor)

Hoisting of 33 KV 3X300 Sq. mm. XLPE cable on double pole including G.I. pipe of size 6" dia 3 M long and its jumpering complete with clamps, nuts and bolts. (GI Pipe,clamps ,nut bolt etc to be provided by contractor,)

Clearing of the line route by cutting of tree branches during erection of line and also upto the time of energisation completely as per direction of Incharge.

Electrical safety Department NOC charges documentation & approval fees etc

High Pressure Testing

PART- C (11 KV LINE)

Safe loading, carriage and unloading & proper stacking of following store materials from any Electy. Store of Lucknow Zone to 33/11 KV S/S Chhauchh, Lakhmipur site (work site).

ST Pole 11 Mt Long-SP-55

8.5 Mtr. Long PCC Pole

V-type cross arm 65x65x6 mm (5.8 Kg/Mtr.)

Polymeric 11KV Disc Insulator T&C Type 4500 Kg.

Disc Fittings Dog/ Racoon 4500 Kg

Polymeric 11KV Pin Insulator

M.S. Angle Iron 65x65x6mm, 2700 mm long 2/6/8 no. Bracing, with 4/12/16 clamps (5.8 kg./m)

M.S. Angle Iron 65x65x6, 2240mm long, 5.8 Kg/Mtr. for cable with clamp

Top chanel 100X50mm, 2240 mm long (9.6 Kg./m) with clamp

MS Channel 100x50 mm (9.6 Kg/Mtr.)

GI wire 8 SWG for guarding along the line

GI wire 8 SWG for guarding across the line

Guarding Angle 65x65x6mm (2500/1600 mm long)

Earthing of pole by MS earthing rod 20x2500 mm and 6 SWG earthing/GI wire etc

Complete Stay (GI Stay rod 16x1800 mm, Stay 7/10 SWG 5 Kg.)

ACSR Weasel Conductor

11 KV 3x120 sq.mm XLPE Cable

11 KV 3x120 sq.mm XLPE I/D, Jointing kit.

11 KV 3x120 sq. mm XLPE O/D, Jointing kit.

Erection of the following support including cutting, making holes, fixing of all types of accessories digging pits complete in all respect as per RESSPO drawing. All type of clamps nut & bolt, washer to be provided by contractor.

For 11 KV Single Support on11 Mtr ST Pole

For 11 KVSingle Support on 8.5 Mtr PCC Pole

For 11 KV Single Section Support on11 Mtr ST Pole

For 11 KVSingle Section Support on 8.5 Mtr. PCC Pole

For 11 KV Making Single/Double Section Pole on existing overhead line on 8.5 Mtr PCC Pole

For 11 KV Section Double Pole support on 8.5 Mtr. PCC Pole

For 11 KV Stud Pole Support on 8.5 Mtr. PCC Pole

For 11 KV End type Double Pole support on 11 Mtr. ST Pole

Concreting of supports in 1:4:8 ratio and plinthing of supports upto 300mm above ground level by using cement ,brick ballast and sand in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing.All matrial would be provided by the contractor.

Earthing of supports with Earth Electrode 2.5 mtr. length including excavation of pit and driving M.S. Rod upto proper depth and connecting the earth electrode with the help of 6 SWG G.I. Wire and earthing lugs. RESPO/ RES. drawing.Earthing of each section pole is also to be done. All type of nut & bot would be given by the contractor.

Erection/fixing for 11KV Stay set with stay wire 7/10 SWG and clamp as per RESSPO drawing including binding, clambing, clamping, tightening, and nozzeling etc. complete in all respect including its grouting in ratio 1:4:8 of cement, sand and brick ballast and sand before back filling of the pits as per RESSPO schedule all clamps, nuts & bolts, cement, brick, concrete blast and etc would be provided by contractor.(Stay Set , Stay wire to be provided by Dept.)

Laying, spreading, lifting, Stinging, jointing and final sagging of ACSR Weasel Conductor in accordance with profiles and sag chart including binding, jumpering and fixing of all accessories in 3 nos. conductor in parallel with PG Clamp binding wire etc requested for job.

Guarding between two poles like single/double/Tri./Four Poles etc. to guard LT/11 KV/Telephone lines, Road/River Crossing etc. with G.I. Wire 6 SWG and G.I. Wire 8 SWG including fixing of guarding channel of requested site with clamps and nuts and bolts as per RESPO/ RES. drawing

Looping of branches of trees along the route of Line and disposal of the same after obtaining permission of competant Authority.

Painting of following supports with one coat of red oxide primer and two coats of aluminum white paint of ISI mark and top danger portion of each support must be painted by providing two coat of Post Office Red Paint (1.5mtr upper portion of support.) Paint and material would be given by contractor to complete of job.

Single Pole of 11 M S.T.P

Section Single Pole of 11 M S.T.P

End Type Double Pole of 11 M S.T.P

Providing & Fixing of 11 KV SMC Danger board ( as per GTP)with Clamp & Nut Bolt

Providing & Fixing of 11 KV SMC Number Plate ( as per GTP) with Clamp & Nut Bolt

Providing & Fixing of G.I. Barbed wire

Providing & Fixing of Stone Pad (300x300x75 mm)

Laying of 11 KV, 3x120 Sqmm XLPE Cable (single circuit) by digging method depth minimum 1.2 mtr. Below ground level and 450 mm wide by excavation of earth. The work include supplying of fine sand ,bricks,stone slab ,refilling and ramming of the left out soil and levelling etc.

Hoisting of 11 KV 3X120 Sq. mm. XLPE cable on double pole including G.I. pipe of size 4" dia 3 M long and its jumpering complete with clamps, nuts and bolts. (GI Pipe,clamps ,nut bolt etc to be provided by contractor,)

High Pressure Testing

Electrical safety Department NOC charges documentation & approval fees etc

Cable Rute Marker

SINLESS ELECRICAL CO. PVT. LTD.

A.A. ENGINEERING CO.

Bidder Name

S.R. Infraconstruction Pvt Ltd

SINLESS ELECRICAL CO. PVT. LTD.

A.A. ENGINEERING CO.