Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹2.0 Craccepted-aoc | ₹2.0 Cr | accepted-aoc |
Tender Value
₹2.0 Cr
EMD Value
₹3.0 L
Closing Date
26 Feb 2026, 9:30 pmClosed
Cauvery Command Area Development Authority
Executive Engineer CADA No.2 Division CBP Mysuru
Improvements of ayacut roads in Nagarle , Kalmahalli ,Kiragunda,Mannehundi ,Eshwaragowdanahalli, Dananayakanapura Saraguru , Hadya,Alasthrikatte Hundi and Sonahalli villages of Mysore District
CCADA/2025-26/RD/WORK_INDENT206/CALL-2
CCADA/2025-26/RD/WORK_INDENT206/CALL-2
Open
Roads
Two Tender Document System(Two Cover)
CCADA EE Division No 2 Mysore
8 documents required · 8 mandatory
The Contractor should have executed in any one financial year the minimum quantities of work (usually 80% of the peak annual rate of construction) in the last five preceding financial years (2020-21 to 2024-25). Quantities should be in the prescribed form as in K/W-4. (1) Embankment-14,977.50 cum, (2) WBM-2,551.30 cum, (3) Cement Concrete - 70.10 cum, (4) Steel-1737.50Kgs.
The Contractor should have satisfactorily completed as prime contractor for at-least one similar work such as Construction / Improvements of roads not less than Rs.99.00 Lakhs (usually not less than 50% estimated value of contract) of the last Five Preceding Financial Years (2020-21 to 2024-25) - Work done certificate should be obtained from not below the rank of Executive Engineer. Work done certificate should be in the prescribed form as in K/W-4
Annual turnover certificate in all classes of civil engineering works only for last five preceding financial years i.e., 2020-21 to 2024-25 obtained from the Chartered Accountant. The tenderer shall scan the original documents and upload the same. The tenderer should have achieved in at least two financial years an annual financial turnover not less than Rs.395.80 Lakhs (in all classes of civil engineering construction works only) (usually not less than two times the estimated annual payment under this contract) - The tenderer shall scan the original documents for this bid and upload the same.
The contractor shall furnish the liquid assets and/or availability of credit facilities not less than Rs.59.40 Lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirements etc. (Line of credit in the prescribed form)
The Contractor who meet the above specified minimum qualifying criteria will only be qualified if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under (Assessed available tender capacity - A x N x 1.5 - B) Where A - Maximum value of civil engineering works executed in any one year during the last five financial years (updated to 2025-26 price level) taking into account the completed as well as works in progress. N - Number of years prescribed for completion of the works for which Tenders are invited. (120/365 Days) B - Value at 2025-26 price level, of existing commitments and on-going works to be completed during the next 120 Days
NIL
NIL
Registration certificate (KPWD/CPWD) - The tenderer shall scan the original and valid Registration certificate (Class III & Above) for this bid and upload the same.
NIL
NIL
NIL
NIL
NIL
NIL
NIL
₹4,950
₹3.0 L
26 Feb 2026
19 Feb 2026
27 Feb 2026
24 Feb 2026
24 Feb 2026
Improvements of ayacut roads in Nagarle , Kalmahalli ,Kiragunda,Mannehundi ,Eshwaragowdanahalli, Dananayakanapura Saraguru , Hadya,Alasthrikatte Hundi and Sonahalli villages of Mysore District
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Scarifying Exisiting Granular Surface to a Depth of 50 mm by Mechanical Means using Hydraulic excavator with all leads and lifts as per the direction of Engineer-in-Charge
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Construction of unlined surface drains of average crosssectional area 0.40 m2 in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with all leads and ...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roll...
Earth work excavation for Foundation by mechanical means for all works in all kinds of soil & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, ba...
Providing rubble and sand filling in layers of 250 to 300 mm including cost of all materials,machinery, labour, watering, ramming and all other ancillary operations complete as per the direction of en...
Providing and laying 250 mm thick sand blanket below embankment including cost of all materials, machinery, labour, spreading to specified thickness and all other ancillary operations complete as per ...
Providing and laying in position cement concrete Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/trap/basalt cru...
Providing Reinforced Cement Concrete Pipe NP3 as per design in Single Row for culverts 450 mm dia with all leads and lifts as per the direction of Engineer-in-Charge
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, Bending,hooking,laping/welding joints, tyi...
Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67:2022 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Line of credit.docx
Others - Line of Credit Format • 0.01 MB
Tender notification - 30.docx
Others - Tender Notification • 0.05 MB
Formats.docx
Others - formats for Existing & Ongoing Works • 0.02 MB
CNNL GPS MAPS.pdf
Others - Maps • 4.50 MB
Drawings Nagarle.pdf
Others - Drawings • 4.22 MB
Bank Gaurantee Format.docx
Others - BG Format • 0.02 MB
KW-4 Bid Document 206 Call-2.docx
Tender Document • 3.08 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .