TN_34_01 Vertical Extension (Assam Type) at Second floor of existing C.H.D. Office Building at Dimalgaon, Kokrajhar.

Amount

CIVIL WORKS: Supplying, fitting and fixing in position reinforcement bars conforming to relevent I.S code for R.C.C. work/ R.B. willing including straightening, cleaning, cutting and bending to proper shapes and length as per ............. etc. complete. a) 6 TMT Corrosion resistant.

Providing form work of 12mm thick plywood board so as to given a rough finish including centering shattering , strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: 3.2.1.1 Column, pillar post...............face.

Providing form work of 12mm thick plywood board so as to given a rough finish including centering shattering , strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: 3.2.1.2 Sides and soffits of Beams, beam haunching cantilever...........ties (a) For depth not exceeding 2.0M.

Providing form work of 12mm thick plywood board so as to given a rough finish including centering shattering , strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: 3.2.1.3 Flat surface such as soffits and suspended floors............like (a) Floors etc. up to 200 mm thickness.

Providing form work of 12mm thick plywood board so as to given a rough finish including centering shattering , strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: 3.2.1.7 Vertical ties, fins sun.....etc.

Providing and laying plain/reinforced cement concrete work , cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of from work sad reinforcement for reinforce cement concrete work. (B) Super structure from plinth level upto 1st floor level. (ii) Column, pillars, post, struts..........1:2:4 nosing (IV) M-10.

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level. A) 112 mm thick brick wall a) In Cement mortar in prop 1:4

15mm thick cement plaster in single coat on rough side of single or half brick wall for interior plastering upto 1st floor level including arises, internal rounded angels, not execeeding 80mm girth and finished even and smooth including curing complete as directed. (B) On Fair side (b) In prop. 1:4

Extra over item 18.1.1 (abc) for each subsequent floor level.

Extra for each subsequent floor or part thereof above the first floor level as mentioned in item no. 3.2.1 & 3.2.3 (b)

Extra over item Nos. 2.2.1 (i) (B) above for each subsequent floor or part thereof above 1st floor level.

Extra for brick walling for each subsequent floor or part thereof above the 1st floor level. (a) 112 mm thick wall

Exra over item no 6.2.1 to 6.2.3 for exterior plastering over wall up to height of 1st floor level above ground level including curring complete as directed. (a) On Single coat plaster

Cement concreate works in topping 1:1:2 (1 cement : 1 sand : 2 graded aggregates on R.C.C floor treads and rise of steps finished with a floating coat of near using cement slurry for bond @ 2.75 kg of cement per sq. m. of floor to be laid in panels including curing complete as directed. (ii) 20 mm thick.

Providing polished ceramic tiles of approved quality, size, shape and thickness not less then 8mm on walls and skirting, over cement mortar bed 10mm thick in prop. 1:3 (1 cement : 3 coarse sand) including cutting where necessary……………wall. (b) Executive range (i) Somary made (iii) Size 148 x 450 mm

Cement plaster skirting with cement morter in prop 1:3( 1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. (a) 15 mm thick.

Providing 18mm thick Granitee slab on vertical face of pedestal laid over 10mm thick base of cement mortar in prop 1:3 (1 cement :3 coarse sand) jointed with grey cement slurry mixed with pigment to …………….. quality of shade.

Providing Antiskid tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement :3coarse sand) approved .................. directed. 5.11.2 VITRIFIED (B) Delux (d) Nitco make

Providing fitting and fixing in position S.F. ceiling with approved quality with necessaery nails, wood screws including 1st class local wood 50mm x 12mm (hillock/bonsum/sundi) beading including……………separately). (A) Stand read ceiling. (ii) Using 6mm thick F.C. Board.

Providing pre painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) TATA Blue scope/Dyna roof/ Durakolor/Wonder Roof or equivalent as directed by the Department (a) 0.50 mm thick

Providing Pre Painted Galvanized iron sheet (PPGI) accessories(Ridging/Valley/Gutter/Flashing) at all levels including fitting and fixing self drilling, self tapping screws comlete. (iii) 0.60mm thick

Providing fitting and fixing and factor made wooden paneled door with panel insert of 75mm to 50mm width and 12mm to 20mm thickness; joined together with continoue tongue and grooves joints glude together with Movicol ………….separately). (ii) 35 mm thick.

Providing fitting and fixing M.S. grill of required pattern for windows/clerestory window/opening with M.S. flat at required spacing in frame all round, square or round M.S. bars with round headed bolts and nuts or screws. I. Plain grill (c) Fixed to Brickwork/P.C.C./R.C.C.

Providing fitting and fixing anodised alluminium sliding windows and ventilators of standard sections without horizontal glazing bars joints mitred and welded (manufactured to relevent IS specifications) and .............. all levels. (a) 2 Track sliding window (i) 6mm clear glass

Providing, fitting, hoisting and fixing of roof trusees including purlins bottom runners of rectangular Hollow section (RHS)/ Square hollow section (SHS) conforming to relevent I.S. 1611 and providing M.S. clear, M.S. angle………….specifications. (a) Using TSTA make.

Providing fitting and fixing godrej S.S. 304 grade railing………….railing (a) S.S. railing.

(a) Applying one coat cement primer of approved brand and manufacture on new wall surface after throughly brooming the surface free from mortar dropping and other ………………... smooth.

Providing surface preparation for walls, celling etc. using average 1.50mm thick plaster of paris including clearing, rubbing with sand paper, filling gaps, depression etc. where necessary……………. directed.

Wall painting (Two coats) with acrylic emulsion paint of approved brand and manufacture( Assian paint/Berger paint/ICI paint/Nerolac) on new ……….smooth. (a) Acrylic Emulsion paint…..

Finishing Old/new wall with water proffing weather coat smooth anti fungal esterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats).

Applying primary coat over new wood and wood based surface over 100mm in grith/width after and including preparing the ……………... papering and knotting. (A) With ready mixed paint, (White).

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/J & N paint/Nerolac) ................. and stopping. (i) Surfaces over 100mm in width or girth. b) High gloss (Asian paint).

Supplying fitting, fixing anodized aluminium fittings of approved make reasonably smooth free from sharp edges corners, flaws and other defetcs and with counter sunk holes for screws including necessary aluminium screws etc. complete. (a) Sliding doors bolts (i) 300 mm x 16 mm.

Supplying fitting, fixing anodized aluminium fittings of approved make reasonably smooth free from sharp edges corners, flaws and other defetcs and with counter sunk holes for screws including necessary aluminium screws etc. complete. (b) Tower bolts (ii) 250 mm x 12 mm.

Supplying fitting, fixing anodized aluminium fittings of approved make reasonably smooth free from sharp edges corners, flaws and other defetcs and with counter sunk holes for screws including necessary aluminium screws etc. complete. (c ) Door Handles (iii) 150 mm.

Providing 0.63 mm thick galned plain sheet in velly………..directed.

Providing and application of Insulatech safeguard coating for head reflecting waterproofing of approved colour as per direction of engineer in charge.

Cement plaster skirting with cement morter in prop 1:3( 1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. (a) 15 mm thick.

Extra over item No. 6.25 to 623 for plastering and mixing water proofing materials…………..directyed. (ii) 15 mm thick (i) In cement mortar 1:3

Providing fitting and fixing vitreous china pedestal type water closet…………….brackets. (A) Parryware (a) White. (i) Universal closed Strap,

Supplying fitting and fixinfg all internal fittings…….specified. (I) Parryware make (a) White (ii) Dual flush.

Providing fitting and fixng vitreous china flat back lipped front urinal ………………..required. (I) Parryware make (i) White (ii) Integrated EF.S.

Supplying fitting and fixing P.V.C. Plain Tee…………..Specified. (a) In exposed or in tranches (II) 110 mm dia

C.P.Gratings (ii) 110 mm dia

Supplying fitting and fixing SF M.C. brand 3 layers pipe………..etc. (i) In exposed or in trenches. (a) 16 mm dia.

Supplying fitting and fixing SF M.C. brand 3 layers pipe………..etc. (i) In exposed or in trenches. (b) 25mm dia-OD

Supplying fitting and fixing SF M.C. brand 3 layers pipe………..etc. (i) In exposed or in trenches. (e) 40 mm dia OD

Supplying fitting and fixing C.P. bib couch……..specified . (iii) Lauret brand (iii) Long nose bib cock.

Supplying fitting and fixing C.P. stop cock……..specified. (iii) Laurent brand. (a) Angle stop cock.

Supplying and fitting fixing C.P. Pillar cock……………..directed. (vii) Mare Brand (c ) Pillar cock (oyster series)

Supplying fitting and fixing C.P. sink cock of approved Brand…………specified. (ii) Agmcco brand (b) Sink cock two way.

Supplying fitting and fixing over head table C.P. spray shower…….specified. (iii) Jaquar make (b) Queen collection (I) Over head rose shower………strange.

Supplying and fitting gun metal country pit valve…………..directed. (b) 40mm dia..

Supplying and fitting gun metal country pit valve…………..directed. (c ) 25mm dia

Providing fitting and fixing vitreous china squatting plate urinal required. (A) Parry ware make. (a) White.

Supplying fitting and placing plastic cylindrical vertical P.C.V.C tank………………pipes. (iii) 100 trees capacity. (b) Poly con make.

Providing wood work in frames of door windows clerestons windows……………..specified. (a) With sal wood.

Providing vitreous China wash basin with CI/ MS brackets C.P brass with plug, PVC waste pipe including painting of fittings and brackets, cutting and making good walls wherever required. (pillar cock, waste coupling are to be paid separately) 1.13.1 PEDESTAL BASIN (with pedestal) (A) Parryware Make (a) White (xii) Oyster 580 x 425.

Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings, cutting & making good the walls wherever required. (A) Parry ware make (ii) Single Bowel with drain.

Providing fitting and fixing mirror complete as directed and specified.

Providing fitting and fixing CP soap tray/soap dish complete as directed and specified. (i) Jaquar make (b) Queen's

Providing fitting and fixing CP towel rail complete as directed and specified. (a) Jaquar make (ii) Continental 600mm (Cat. No. CAN-1111 N)

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other lSl approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) ln exposed surfaces or in trenches. (ii) 100mm dia.

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other lSl approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) ln exposed surfaces or in trenches. (iv) 75mm dia.

Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other lSl approved including joining ,fitting and fixing etc.as necessary complete and specified. a) ln exposed surfaces or in trenches. (ii) 100mm dia.

Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other lSl approved including joining ,fitting and fixing etc.as necessary complete and specified. a) ln exposed surfaces or in trenches. (iv) 75mm dia.

ELECTRICAL WORKS: Wiring for light/fan/ call bell point with 2x1.5 sq mm. PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR cable or Equivalent make as approved by the Deptt.) with flat 19mm ISI marked casing 'n' capping (AKG/Precision/Presto Plast/Polycab/MW or equivalent make as approved by the Deptt.) in surface system, including 6 Amp flush type switch/bell push(Anchor Penta/Gold medal/ Kolor kany.kom/havells or equivalent make as approved by the deptt.) G.I/MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover, ceiling rose (Anchor/Gold medal/kolor kany.kom/Havells or equivalent make as approved by the Deptt.) etc. complete as directed and specified by the deptt. 1.1.1 Short point up to 3.00 metre. length.

Wiring for light/fan/ call bell point with 2x1.5 sq mm. PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR cable or Equivalent make as approved by the Deptt.) with flat 19mm ISI marked casing 'n' capping (AKG/Precision/Presto Plast/Polycab/MW or equivalent make as approved by the Deptt.) in surface system, including 6 Amp flush type switch/bell push(Anchor Penta/Gold medal/ Kolor kany.kom/havells or equivalent make as approved by the deptt.) G.I/MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover, ceiling rose (Anchor/Gold medal/kolor kany.kom/Havells or equivalent make as approved by the Deptt.) etc. complete as directed and specified by the deptt. 1.1.2 Medium point up to 6.00 metre. length.

Wiring for light/fan/ call bell point with 2x1.5 sq mm. PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR cable or Equivalent make as approved by the Deptt.) with flat 19mm ISI marked casing 'n' capping (AKG/Precision/Presto Plast/Polycab/MW or equivalent make as approved by the Deptt.) in surface system, including 6 Amp flush type switch/bell push(Anchor Penta/Gold medal/ Kolor kany.kom/havells or equivalent make as approved by the deptt.) G.I/MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover, ceiling rose (Anchor/Gold medal/kolor kany.kom/Havells or equivalent make as approved by the Deptt.) etc. complete as directed and specified by the deptt. 1.1.3 Long point up to 10.00 metre. length.

Wiring for 5/6 pin 16 Amps plug point with 4 sq mm PVC. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694:1990 Volts with flexible bright annealed to electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kabel or Equivalent make as approved by the Deptt.) with flat 19mm ISI marked casing and capping (AKG/precision/Presto Plast/Polycab/MW or equivalent make as approved by the Deptt.) in surface system, including providing 5 pin 6Amps flush type socket outlets and 6 Amps F/T switch (Anchor Penta/Gold medal/ kolor kany.kom/ Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover, earth continuity with 2.5 sq mm cable to third pin of the socket etc. as required complete. (1.3.2) Medium point up to 6.00 metre length.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kabel or equivalent Make as approved by the Deppt.) in surface flat ISI marked casing and capping (AKG/precision/Presto Plast/Polycab/MW or equivalent make as approved by the Deptt.) system including earth continuity. 1.8.1 With 2 x 2.5 sq. mm + earth continuity with 1 x 1.5 sq. mm in flat 19 mm ISI marked casing 'n' capping system.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kabel or equivalent Make as approved by the Deppt.) in surface flat ISI marked casing and capping (AKG/precision/Presto Plast/Polycab/MW or equivalent make as approved by the Deptt.) system including earth continuity. 1.8.2 With 2 x 4 sq. mm + earth continuity with 1 x 2.5 sq. mm in flat 19 mm ISI marked casing 'n' capping system.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kabel or equivalent Make as approved by the Deppt.) in surface flat ISI marked casing and capping (AKG/precision/Presto Plast/Polycab/MW or equivalent make as approved by the Deptt.) system including earth continuity. 1.8.3 With 2 x 6 sq. mm + earth continuity with 1 x 4 sq. mm in flat 25 mm ISI marked casing 'n' capping system.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kabel or equivalent Make as approved by the Deppt.) in surface flat ISI marked casing and capping (AKG/precision/Presto Plast/Polycab/MW or equivalent make as approved by the Deptt.) system including earth continuity. 1.8.4 With 2 x 10 sq. mm + earth continuity with 1 x 6 sq. mm in flat 25 mm ISI marked casing 'n' capping system.

Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 volts with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts(Finolex/RR cable/ Niccon/ Anchor or equivalent make as approved by the Deptt.)including providing and fixing 5 pin 6 Amp socket outlet (Anchor Penta/Gold medal/ Kolor kany.kom/Havells or equivalent make as approved by the deptt.) earthing the 3rd pin of the socket as requiredc on the switch board in ISI marked casing and capping system, when fitted on same board of light and fan.

Supplying and fixing of polished Brass Bracket of 18 S.W.G. 25 cm long cast plate and brass lamp holder complete including connection as approved by the deptt. as required. (Without Lamp)

Supplying and fitting of 18/20 watt CFL lamp in the existing batten holder/angle holder/decorative bracket/bulk head fitting/pendent holder etc. as specified and directed by the deptt.

Supplying and fitting fixing sheet steel, phosphatised powder painted dust vermin proof double door (ID-43) surface mounting SPN MCB DB incorporated with bus bar N - link earth wire able etc. fitted on wall with grouting nuts and bolts as required complete with making necessary connection as approved and specified as directed by the department. 15.4.1 (Schneider neo break, C & S, Havells, Standard, or equivalent as approved by the deptt.) 15.4.1.1 4 way SPN double door.

Supplying with fitting and fixing single pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. B Series 161.1 (Schneider MG, legrand, Hager, Crabtree Xpro make) 16.1.1.1 6 to 32A

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the folloowing capacity complete with making necessary connection as approved, specified and directed by the deptt. B series 16.3.1 (ABB Schneider MG. Legrand, Hager, Crabtree Xpro make) 16.3.1.2 40A.

Supplying installation of testing of G.I. earth station with perforated 40mm dia and 4.50 mt. long heavy duty G.I. pipe with necessary 40mm dia. G.I. Fitting such as Socket, Tee, elbow, nipple and 50 mm x 40mm G.I. reducing socket for funnel including locking arrangement 300 mm x 300 mm x 6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick copper and flustering of both inner of outer surface of wall as specified and directed by the department.

Extra for using salt 5 Kg and Charcoal 64 kg in pipe earth station pit to provide low impendence ground in location of high soil resistivity as and when required and specified by the Deptt.

Supplying and laying of 8 SWG Copper, earth from earth Electrode (below G.L) to electrical switch gear or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Supplying including fitting and fixing of following A.C. Ceilling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connections as approved by the Deptt.) as required complete and as directed by the deptt. [Without regulator] . 27.1.3 Premium model 1400 mm sweep (ORIENT PSPO make) premium model 1400 mm sweep ss-390 Decorative (Havels make).

Supplying including fitting and fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweep with making necessary connection as approved by the Deptt.) as required complete and as directed by the Deptt. 27.2.1 Domestic. 27.2.1.2 Power flux 225 mm sweep (Orient make).

Supplying fitting and fixing of ceiling fan regulator including connection etc. Complete as required . 27.6.2 Electronic type

Supplying, installation, testing and commissioning of the following LED luminaries complete with all accessories such as driver etc. directly on wall/ ceiling including connection with 1.5 sq. mm PVC insulated S.C. copper conductor as required and as directed by the department. ECBC.3.28.1 LED Lamp indoor application, operating voltage 90V-250V, 12V DC 1. Model Gn111-2 or equivalent, LED Lamp with Main input (Make Philips/ Bajaj/ Schneider/ Havells).

Load Sanction for APDCL.

Khitish Ojha

Anup Kumar Agarwala