ADDN/ALTN TO FURNITURE YARD AT BSO UNDER DSSC WELLINGTON

Amount

Dismantling (corrugated or semi corrugated ,etc) Asbestos cement sheeting in rorof covering complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof coverings fixed with self tapping screws as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof coverings/cladding to wall fixed with self tapping screws as specified and as directed.

M & L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in padding, coping, bed plates, hold fast blocks, levelling courses, etc., including formwork, weathering, slightly rounded or chamfered angles and throating

Excavating in post holes each n.exc 0.50 cum getting out hard dence soil including returning filling in and ramming earth or broken rubble mixed with earth around ,in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50 mtr and making good surface.

S&F mild steel works such as Joist, channel, angle or tee sections, posts, rafters, purlins, trusses, connecting plates, etc. fixed independently conforming to Fe-410-W(Gde E-250) quality-A all as specified.

S&F mild steel works as framed roof members, rafters, purlins, trusses, connecting plates, cleats, etc. including distance pieces conforming to Fe-410-W(Gde E-250) quality-A all as specified.

S&F mild steel works such as bands straps, holdfasts, wind ties, etc. and similar articles conforming to Fe-290 (Gde E-165) allas specified.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening Fe 410-W (Gde-E- 250)quality-A as specified and as directed.

Dismantling of boarding, any descreption, fixed in any position with nails all as specified and directed

S&F 18/19mm thick Particle board, exterior grade prelaminated both sides with decorative choice lamination, fixed with nails/ screw screws to timber frame work including liping work teak wood beading 6mm thick comple all as specified and directed

S&F Continuous (Piano) hinges brass, bright finish width of flaps 40mm all as specified.

S&F brass knobs 35-40mm dia in repairs complete all as specified and directed

Dismantiling of floor hearth wall tiling or terrazzo flooring including cement mortar bedding removing debris off the premises complete all as specified and as directed.

M&L for granite work with 20 mm thick granite slabs (Jet Black in colour table rubbed and polished) in cooking platform, in single or two piece length microwave platform, WHB counter top set in cement mortar screed bed or dedding layer of CM 1:3, 20 mm thick including pointing in white cement 1:2 using marble dust, of superior quality machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified and as directed.

S&F fixing 12mm thick plaster of paris ceiling (Gypsum nhydrous) to flat surface connecting with Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided etc complete all as specified and as directed.

M&L for Reinforced Cement Concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in Beams and columns in floors roofs,landing,balconies,canopies,deck slab and in shelves and like complete as specified and as directed.

M&L for Form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc.

Fair finished flat surfaces of concrete formwork to soffits of suspended slab such as roof,floorslabs,landing and similar work not exceeding 200mm thick

Demolition of brick work / pre cast concrete article / stone masonry built in cement mortar all as specified and as directed.

M&L for Precast cement concrete solid building blocks or slabs Type C1(1:3:6) using 20 mm graded aggregate, exc 10 cm thick set in CM 1:6 all as specified and as directed.

M&L for Precast cement concrete solid building blocks or slabs Type C1 (1:3:6) using 20 mm graded aggregate, 10 cm thick set in CM 1:6 all as specified and as directed.

M&L for 50mm thick PCC 1:2:4 type B1 (20 mm graded aggregate) with using Glass dividing strips, 3 mm thick as in floor finished even and Smooth without using extra cement as specified and as directed. Glass dividing strip shall be measured and paid separately.

M&L for Glass dividing strips, 3 mm thick with width 48mm as specified and as directed

M&L for 100mm thick PCC 1:4:8 type D2 (40 mm graded aggregate) as in Sub base floor finished even and rough to receive the top layer all as specified and as directed.

Taking down cement or cement lime plaster of any thickness and any description on brick or stone wall etc incl racking out joints, hacking for key scrubbing down with water etc all as specified and as directed.

M& L for Rendering in CM (1:6) 15 mm thick on fair faces of brick work surfaces of wall finished even and smooth without using extra cement all as specified and as directed.

M& L for Rendering in CM (1:4) 20 mm thick in cement mortar 1:4 using integral water proofing compound on fair face of brick/concrete surfaces and finished even and smooth without using extra cement all as directed.

M& L for Rendering in CM (1:4) 5 mm thick on fair faces on ceiling surfaces of wall finished even and smooth without using extra cement all as specified and as directed.

M&L for screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:4 complete all as specified and as directed.

Material and labour for coloured light shade vitrified tiles 600 x 600 x 8 to 10 mm size as in flooring set and jointed in neat cement slurry and pointed in coloured cement to match, on flooring, all as specified and as directed.

M&L for chequred cement concrete tiles 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments of required colour laid over and including 20mm thick screed bed in cement mortar (1;6) all as specified and as directed.

M&L for 75mm thick Plain Cement Concrete type C-1, 1:3:6 (20mm graded stone aggregate) as in floors, plinth protection etc. finished even & fair without using extra cement complete as specified and as directed.

S&F Second Class hard wood clean and sawn plain, solid, straight as in chowkat and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Taking down shutters of any description not exceeding 1 Sq. M each complete all as specified and directed

Taking down Chowkats or frames not exceeding 1.5 Sq.M each (Without taking off shutters from the frames). complete all as specified and directed

Taking down Chowkats or frames exc 1.5 Sqm but not exceeding 4 Sq.M each (Without taking off shutters from the frames) complete all as specified and directed

S&F Second class hard wood plain, framed, Paneled door Shutters 30 mm thick (any number of panels), with lock rail and panels 12mm veneered particle board with commercial veneered on both faces. The size of rail and stiles as per IS 1003 (Pt-I), kiln seasoned and chemically pressure treated etc complete all as specified.

S&F Second class Hard wood glazed and skeleton door, shutters, open rebated and prepared to received glass, gauge etc (without sash bar) edges of framing plain, charnfered or rounded and mitred, beads 8.23 (b) thickness 30mm and fitted to Chowkets etc. complete all as specified and as directed..

M&L for PCC (1:3:6) Type C1(using 20 mm graded stone aggregates) as in holes fast, PCC Bed blocks in finished all exposed surfaces of concrete including necessary form work complete all as specified and directed.

S &F MS Butt hinges medium weight cold rolled & fixed 100mm long all as specified and as directed.

S & F Aluminium anodized barrel tower bolts of extruded section 200mm all as specified and as directed.

S & F Aluminium anodized handles cast type 150mm long all as specified and as directed.

S & F Aluminium alloy anodized sliding door bolt with hasp and staple of size 300mm long all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or beads all as specified

S & F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square but exceeding 0.5 Sqm in each pane all as specified and as directed

M & L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots etc and applying one coat of white wash on wall complete all as specified and as directed by Engr-in-Charge

M& L for applying three coats of white wash on walls including preparation of newly plastered surfaces of wall complete all as specified and as directed by Engr-in-Charge

M& L for applying three coats of white wash on walls including preparation of newly plastered surfaces of ceilings complete all as specified and as directed by Engr-in-Charge.

M & L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots etc and applying three coat of white wash on ceiling complete all as specified and as directed by Engr-in-Charge.

M&L for preparing newly plastered surfaces on external walls and applying one coat of exterior wall putty for smoothness, one coat of exterior wall primer and two coats of Exterior Emulsion anti-algal weather proof paint complete all as per manufacturer instruction as directed.

M&L for preparing new steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description over 10 cm width or girth incluidng necessary preparation of surface all as specified and directed.

M&L for preparing old steel surfaces and applying one coat of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth incluidng necessary preparation of surface all as specified and directed.

M&L for preparing new wood surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wood surfaces of any description over 10 cm width or girth incluidng necessary preparation of surface all as specified and directed.

M&L for preparing old wood surfaces and applying one coat of synthetic enamel paint on wood surfaces of any description over 10 cm width or girth incluidng necessary preparation of surface all as specified and directed.

Complete removal of existing treatment on external walls by wire brushing, crack filling & Bio-wash to fight microbial growth and applying one coat of exterior wall putty for smoothness, one coat of exterior wall primer and two coats of Exterior Emulsion anti-algae weather proof paint complete all as per manufacturer instruction all as specified and as directed.

M&L for preparation of new surfaces of walls and applying with white putty and making the surface to an even &smooth finish,rubbing with sand paper of different grade etc and applying two coats of tractor emulsion or Oil bound emulsion distermper over a coat of primer to be applied by approved applicator of the manufacturer of the paint and all as specified and as approved.

M&L for complete removal of existing treatment on surfaces of wall &applying with white putty and making the surface to an even &smooth finish,rubbing with sand paper of different grade etc and applying two coats of tractor emulsion or Oil bound emulsion distermper over a coat of primer to be applied by approved applicator of the manufacturer of the paint and all as specified and as approved.

Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30cm in depth, 1.5m in width as well as 10sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m, as directed by Engineer in charge.

Surfaces excavation n exc 30 cm deep and averaging 0.225cm deep and getting out in hard/dense soil all as specified and as directed.

Removing excavated materialnot exc 50 m but n exc 200 m and depositing where directed (Soils) at a level not exc.1.5mts above the starting point all as specified and as directed.

Material and labour for hard core of broken stone or boulders n.exc 63 mm deposited, spread and levelled in layers n.exc 15cm thick,water and rammed to a surface complete all as specified.

M&L For 75mm thick cement concrete Type D-2 1:4:8, Using 40mm graded stone aggregate for sub base of floors complete all as specified.

M & L for providing river sand/M-sand cushioning below paver block, thickness average 50mm thick complete all as specified and directed.

M & L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with gray cement and pigment including necessary compaction complete all as specified and as directed

Taking down carefully old existing Un-Serviceable Al/Copper batten/surface conduit/concealed conduit point wiring (light/exhaust fan/socket/call bell/ Power point) complete including (fittings and fixtures such as switches, ceiling roses, shades, brackets, sockets, holders, light fittings, call bells, Fluorescent tube light fitting) removing the Un-Serviceable retrieved materials from site making good the disturbed surfaces of walls/floors/ ceilings etc. complete all as specified and directed by Engr-in-Charge.

Taking out unserviceable PVC insulated/sheathed sub main wiring with 2 single core aluminium conductor cable of size upto 10 Sqmm on wooden batten/PVC conduits complete with battens/conduits and shall be removed from site and making good the disturbed surfaces of wall complete all as specified and directed by Engr-in-Charge.

Disconnecting/dismantling of old existing un serviceable DB's any way 240/415 Volts with their old/un serviceable burnt MCBs complete all as specified and directed by Engr-in-Charge.

M&L for point wiring with 1.5 Sq mm, PVC insulated, FRLS,single core, copper conductor cable, 1100 Volt grade, multi stranded drawn through and including medium grade Rigid non metalic PVC conduit conealed in wall/ceiling/roof etc with all necessary accessories for the following controlled by one switch with and including continuous 1.5 Sqmm PVC insulated single core copper conductor cable earth continuity conductor connected to common earth and earth dolly, in the modular flush boxes etc. complete all as specified and directed by Engr-in-Charge.Make of cable: Havells/Finolex/Polycab and Make of conduit: Precision/Finolex/Modi/Bajaj plast. Note: (i) The wiring shall be done in proper color coding using red,yellow,blue for phases, black for neutral and green for earth. (ii) The cost of cutting chases and making good the disturbed surfaces is deemed to be included in the unit quoted rates.(iii) Modular flush boxes will be measured & paid seperately

a) One light/fan/call bell point controlled by one switch

b) One 5 amps 5 Pin socket outlet on independent board

All as per Item No-70 above but with PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor for 16A switch socket. Note: (i) The wiring shall be done in proper color coding using red,yellow,blue for phases, black for neutral and green for earth (ii) The cost of cutting chases and making good the disturbed surfaces is deemed to be included in the unit quoted rates.(iii) Modular flush boxes will be measured & paid separately.

M&L for 3-phase sub main wiring (4 x4 Sqmm + 1 x 4Sqmm for earth wire)with multi stranded, PVC insulated, 11000 Volt grade, FRLS copper conductor drawn through and including medium grade non mettalic PVC conduit concealed in wall/ceiling/roof etc. with earth continuity conductor of size 4 Sqmm connected common earth complete all as specified and directed by Engr-in-Charge. Note:(i) 5 runs of 4 Sqmm cable and one run of conduit shall be measured as one unit length (ii) The wiring shall be done in proper color coding using red,yellow,blue for phases, black for neutral and green for earth (iii) The cost of cutting chases and making good the disturbed surfaces is deemed to be included in the unit quoted rates

M&L for sub main wiring with two single core, multi stranded, PVC insulated, 1100 Volt grade, FRLS cable with multi stranded copper conductor of size 4 Sq mm drawing through and including medium grade non mettalic rigid PVC conduit concealed in wall/ceiling/roof etc. including continuous PVC insulated copper conductor single core earth continuity conductor of size 4 Sqmm connected common earth complete all as specified and directed by Engr-in-Charge. Make of cable: Havells/Finolex/Polycab and Make of conduit: Precision/Finolex/Modi/Bajaj plast. Note:(i) 3 runs of 4 Sqmm cable and one run of conduit shall be measured as one unit length (ii) The wiring shall be done in proper color coding using red,yellow,blue for phases, black for neutral and green for earth (iii) The cost of cutting chases and making good the disturbed surfaces is deemed to be included in the unit quoted rates.

M&L for sub main wiring with two single core, multi stranded, PVC insulated, 1100 Volt grade, FRLS cable with multi stranded copper conductor of size 2.5 Sq mm drawing through and including medium grade non mettalic rigid PVC conduit concealed in wall/ceiling/roof etc. including continuous PVC insulated copper conductor single core earth continuity conductor of size 2.5 Sqmm connected common earth complete all as specified and directed by Engr-in-Charge. Make of cable: Havells/Finolex/Polycab and Make of conduit: Precision/Finolex/Modi/Bajaj plast. Note:(i) 3 runs of 2.5 Sqmm cable and one run of conduit shall be measured as one unit length (ii) The wiring shall be done in proper color coding using red,yellow,blue for phases, black for neutral and green for earth (iii) The cost of cutting chases and making good the disturbed surfaces is deemed to be included in the unit quoted rates

S&F Modular type socket outlet 2 in 1, 6/16 Amps ISI marked all as specified and as directed. Cat No ACVKCWW163 Verona of Crabtree or techno-commercially equiv In Legrand/Anchor Roma.

S&F in repairs Modular type switch single pole 16 Amps one way all as specified and as directed. Cat No ACVSXXW161 Verona of Crabtree or techno-commercially equiv In Legrand/Anchor Roma.

S&F in repairs Modular type switch single pole 6 Amps one way all as specified and as directed. Cat No ACVSXXW061 Verona of Crabtree or techno-commercially equiv In Legrand/Anchor Roma.

S&F in repairs Modular type socket out let ISI marked 6 Amps 2/3 pin combined 2 module all as specified and as directed. Cat No ACVKSWW063 Verona of Crabtree or techno-commercially equiv In .Legrand/Anchor Roma

Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 1/2 modules all as directed.

Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 3 modules all as directed.

Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 6 modules all as directed.

Supply & Fixing modular cover plate suitable for fixing switches/sockets of 1/2 modules all as directed.

Supply & Fixing modular cover plate suitable for fixing switches/sockets of 3 modules all as directed.

Supply & Fixing modular cover plate suitable for fixing switches/sockets of 6 modules all as directed.

Note for item No 79 to 84:- The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & sockets.

S&F of ceiling rose surface mount PVC/Polycarbonate, isolated body with face bakelite two/three terminal complete all as specified and directed. Make: Havells/CG/Anchor

S&F IP>=20, Class I, Wall mounted 4 feet LED lighting fixture with integrated electronic driver & polycarbonate difuser complete with all accessories, prewired, 20 W with min 1800 lumens, 6500 K, PF>=0.90, CRI>=80 and connecting of flexible wire twin core from ceiling rose to fitting in flexible conduit all as specified and directed by Engr-in-Charge. Make: Havells Cat No:ENDURALINEARNEOBS20WLED865SPCWH or techno-commercially equiv in Philips/Jaguar

S&F IP>=20, Class I Wall mounted 4 feet LED LED lighting fixture with integrated electronic driver & polycarbonate diffuser complete with all accessories, prewired, including 40 W with min 3600 lumens, 6500 K, PF>=0.90, CRI>=80 and connecting of flexible wire twin core from ceiling rose to fitting in flexible conduit all as specified and directed by Engr-in-Charge. Make: Havells Cat No:STOUT1200BS40WLED857SPCWH or techno-commercially equiv in Philips/Jaguar

S&F ultra modern, recess mounting, 40W, 6500K LED Elegant slim panel of size 2' x 2' suitable for ceiling complete with electronic driver & high brightness LED of Make: Luker cat No: LPS40 or techno-commercially equiv in Jaguar/Philips all as directed by the Engr- in- charge .

S&F IP >= 65, IK>=07, Class I energy saving and environment friendly long life high power LED as source of building security light of 25W made up of pressure die cast aluminum housing with acrylic cover as diffuser with including GI pipe bracket made out of 40mm dia light grade pipe of length 1.2 Mtrs, bend to shape 120-130 degree and MS clamps made out of 25x3mm flat iron 2 Nos including nut and bolts for fixing the bracket and making connections in flexible conduit all as directed. Make: Cat no ENDURA PEARL SL25W LED 757SASYTOPC Endura pearl of Havells or techno-commercially equivalent in Philips/Jaguar

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25mtrs deep below ground level) with top edge of plate not less than 1.5mtrs below normal ground level, connected to GI earth wire 4 mm dia by means of bolts,nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point on completion with and including 15mm bore medium grade GI protection pipe (upto 7.5mtr long) for earth and 20mm GI medium grade for watering including PCC chamber pit & cover with suitable lifting hooks, with funnel, wire mesh, common salt, charcoal filling, necessary excavation and earth work in any type of soil complete all as specified including taking out the existing u/s earthing accessories. Note: On testing after completion, if the desired earth resistance is not obtained the earthing shall be redone at no extra cost till the entire satisfaction of Engr-in-Charge.

Supply, install, testing & commissioning of Exhaust fan, metal body with automatic back shutter louvers 300 mm sweep, 1400 RPM or more, Air Delivery not less than 1850 CMH, single phase, 240 Volts, AC, 50 Hz and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) incl taking down of old ex fan complete all as specified & as directed. Make : Havells, Cat No: Ventil Air - DB or techno-commercially equivalent in Usha/Crompton. Note :- (i) The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates.(ii) Old unsv Exhaust fans should be handed over to MES stores.

S&F VTPN DB 4 Way,IP43,IK-09 Metal Double Door type 415V fitted with Bus-bar and blanking plates, Neutral link fixed flush to wall and making good the disturbed surfaces with all other accessories including necessary connection complete all as specified and directed by Engr-in-Charge.Make: L&T, Cat No: DBVTM004DD or techno-commercially equiv in Legrand/ABB/Siemens. Note:- (i) The cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates.

S&F MCB, TPN 'C' series 10KA 415 V of capacity 65A with breaking capcity 10KA complete all as specified & as directed by the Engr-in-Charge.Make: L&T, Cat No BB40630C or techno-commercially equiv in Legrand/ABB/Siemens.

S&F MCB, SPN, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA all as specified and dircted by Engr-in-Charge. Make-L&T, Cat No-BB20320C or techno-commercially equivalent in LEGRAND/SIEMENS.

S&F MCB, SP, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA. Make-L&T, Cat No-BB10320C or techno-commercially equivalent in LEGRAND/SIEMENS.

S & F SPN DB, 12 Way IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed by Engr-in-Charge.Make: L&T, Cat No: DBSPN012DD or techno-commercially equiv in Legrand/ABB/Siemens. Note:- (i) The cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates.

S & F SPN DB, 8 Way IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed by Engr-in-Charge.Make: L&T, Cat No: DBSPN008DD or techno-commercially equiv in Legrand/ABB/Siemens. Note:- (i) The cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates.

S & F SPN DB, 4 Way IP43, IK09, Metal door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed by Engr-in-Charge.Make: L&T, Cat No: DBSPN004DD or techno-commercially equiv in Legrand/ABB/Siemens. Note:- (i) The cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A C Series with Breaking capacity 10KA all as directed.Make: L&T, Cat No : DBMPS120SD or techno-commercially equiv in Legrand/ABB

Excavation in trenches not exc 1.5 m wide and not exc 1.5m depth for errecting of poles, Laying of cables and getting out in hard/dense soil complete all as specified.

Returning, filling in, including spreading levelling, watering and well ramming in layers not exc 25 cm in depth in hard/dense soil all as specified and as directed.

Removing excavated material to a distance not exc 50 m and depositing where directed at a level not exc 1.5m above the starting point all as directed.

Supply and laying sub class 'B' bricks of size 230 x 115 x 75 mm laid across the cable for cable protection, above sand complete all as specified and directed.

Supply and laying light grade GI Pipe (ISI Marked) of 40mm dia for cable protection to be fixed on wall/in trenches with necessary clamps or in road crossing,complete all as directed(Rate qouted shall include MS clamps of required size wherever pipes are to be fixed on walls/other surfaces)

M & L for cutting the existing hard standing /PCC /WBM road at a depth not less than 45 cm and 25 cm in width for passing of cable through GI pipe, returning filling in, complete including finishing the surfaces by providing top not less than 25 cm thick cement concrete type C-1 (1:3:6) using 20 mm grade aggregate, bottom filled with excavated earth and finishing to a uniform smooth surface complete all as specified and directed.

Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings etc. Cable Under ground, armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area, 4 Core 25 Sqmm incl connecting with suitable glands, lugs etc all as specified and directed by the Engr-in-Charge. Make: Havells/Finolex/Polycab

Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings etc. Cable Under ground, armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area, 2 Core 6 Sqmm incl connecting with suitable glands, lugs etc all as specified and directed by the Engr-in-Charge. Make: Havells/Finolex/Polycab

Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings etc. Cable Under ground, armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area, 4 Core 16 Sqmm incl connecting with suitable glands, lugs etc all as specified and directed by the Engr-in-Charge. Make: Havells/Finolex/Polycab

Supply, spreading and compacting of approved river sand/riddled earth in trenches for cable cushion on both top and bottom of cable, including ramming complete all as specified and as directed by Engr-in Charge

SREE PARABRAHMA CONSTRUCTION

K.AYYAPPAN

Sree Constructions

ACE PROMOTERS