PROVN OF RETAINING WALL AT SECTOR C AND RAIN WATER HARVESTING NEAR BLDG NO T-111 AND T-112 AT ZAKHAMA MIL STN

Amount

Rough Excavation over areas,n exc 1.5m and getting out in soft/lose soil complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete.complete all as specified and directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in Cement Mortar(1:6) complete all as specified and directed.

M&L for Pre-Cast Plain Cement Concrete (1:3:6) type C1( using 20mm graded stone aggregate) as in bond stone set in Cement Mortar (1:4.) complete all as specified and directed.

Extra over stone walling for 20mm hammer dressing of face and joints of Random Rubble walling, uncoursed or brought upto courses.complete all as specified and directed.

M&L for raised pointing to random or polygonal rubble uncoursed or brought upto course with cement mortar (1:4) complete all as specified and directed.

S & F 75mm bore Single socket(SWR) Pipes in any length with rubber ring joint, laid in trenches or in floor, complete all as specified and directed.

M&L for Plain Cement Concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as copping. complete all as specified and directed.

M & L for hand packing any thickness of broken stone or boulder at back of wall over arches etc and raising or lowering) to thr required level, complete all as specified and directed.

Removing excavated soil exc 50mtr distance & depositing where directed at a level nexc. 1.5 mt above the starting point. .complete all as specified and directed.

Returning filling in including spreading levelling watering & well ramming in layers n.exc 25 cm in soft/loose soil.complete all as specified and directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundations of poles etc. and getting out including trimming the sides and forming bottom surfaces to required levels in hard/dense soil complete all as specified and directed.

M& L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate ) in foundations, filling and mass concrete complete all as specified and directed.

M & L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

M & L for 15 mm thick rendering on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant complete all as specified and directed.

M & L for 75mm thick cement concrete type C2 (1:3:6) (using 40 mm graded stone aggregate) and finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.

S & F Rolled sections as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, complete all as specified and directed.

S & F 15mm bore stop valves of PTMT any colour high pressure, screwed for iron pipe and fixed 15 mm bore complete all as specified and directed.

S & F 15mm bore Bib taps of standard PTMT any colour high pressure, screwed for iron pipe and fixed complete all as specified and directed.

Supply, Laying and testing GI tubing of size 15mm bore 'medium grade' (ISI marked) with and including all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc laid in floors /ceiling and including clips, wall hooks etc,complete and making necessary connection and testing on completion complete all as specified and directed

Supply, Laying and testing GI tubing of size 20mm bore 'medium grade' (ISI marked) with and including all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc laid in floors /ceiling and including clips, wall hooks etc,complete and making necessary connection and testing on completion complete all as specified and directed

S & F 110 mm bore Single socket(SWR) Pipes in any length with rubber ring joint, laid in trenches or in floor, complete all as specified and directed.

S&F PVC (SWR) bends of any radius of 110mm dia complete all as specified and directed .

S&F PVC (SWR) juncton single 'T' equql or unequal of 110mm dia complete all as specified and directed .

S & F rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) of capacity 1000 Ltrs hoisted and fixed in position complete all as specified and directed

M&L for providing precast RCC Cover type B1 (1:2:4) using 20 graded stone aggregate set in CM (1:4) complete all as specified and directed.

M& L for Mild steel TMT bar 10 mm dia or above cut to length bent to shape required including cranking, bending spirally, hooking ends etc and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

S&F galvanized plain mild steel sheeting 1.00 mm thick in ridges, hips, valley gutters, drip & straight flashings (length and firth as fixed ) with grade of zink coating 275. complete all as specified and directed.

M&L two coats of synthetic enamel paint to steel surface over a coat of red oxide primer including preparation of the surface over 10cm width or girth complete all as specified and directed

VIHUTO YEPTHO

commercial enterprises