R.I.Office at Basudevpur _building

Fly Ash brick masonary in Cement Mortar (1:6) in foundation/Superstructure using-fly ash-brick of 23cm X 11cm X 8cm size having a crushing strength in between 75kg to 100 kg per Sq.cm with dimensional tolerance ± 8% including splays cutting circular moulding chamfering & corbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. complete including cost & conveyance of all materials & labour required for the work with all Royalty, DMF, EMF & Additional Charges with all T&P & Cess etc, complete in all respect as per the direction of Engineer-in-charge.

Providing cement concrete of proportion (1:3:6) in foundation and floors using 4cm (3/2") size clean hard black hand broken granite stone metal of approved quality and from approved quarry including hoisting lowering and laying concrete in layers not exceeding 15cm (6) thick to the required level ramming, watering & Curing etc. complete including cost & conveyance of all materials with all Royalty, DMF, EMF & Additional Charges and all labour with T&P required for the work with Cess etc, complete including dewatering if required as per direction of Engineer In Charge.

Cement concrete of proportion (1:2:4) using 12mm (1/2) size clean crusher broken grantie chips of approved quality from approved quarry including hoisting lowering and levelling in position to required level including frame work where neCessary ramming and levelling cruing dewatering with cost conveyanceand Royalty, DMF, EMF & Additional Charges labour of all materials including hire and running charges of machineries T&P required for the work with Cess etc, complete as per specification and direction of Engineer-in-charge.

12mm (1/2) thick cement plaster in C.M (1:6) finsihed smooth brick work with neat cement punning watering & curing for seven daysand two coats of bitumen painting over top of walls and below the bearing of roof slab including cost and conveyance of all materials and labour withT&P required for the work including Cess with alland Royalty, DMF, EMF & Additional Charges etc, complete in all respects in all floors as per direction of Engineer-in-Charge.

Supplying, Fitting & fixingof 32mm (5/4) thick piasal wood or local teak wood fully glazed shutters complete with iron fittings and wooden hinged cleats etc fitted and fixed in position including cost,conveyanceof all materialslabour charges, with T & P,Cess required for the work but excluding the cost of glass panels and iron fittings etc complete in all respect as directed by Engineer-In-Charge.

Supplying, fitting and fixing in position well dressed and well seasoned sal wood work framed and fixed (wrought and put up) in choukaths for doors, windows and ventilators including cost of iron work and coal taring 2 coats to wall side faces of choukaths including cost of coaltar, cutting grooves and mending to sizes where neCessary with cost and conveyance Royalty, DMF, EMF & Additional Charges andof all materials and labour, Cess with T&P required for the work etc. complete in all respect as per direction of Engineer-In-Charge.

Distempering one coats over a coat of oil bound primer to the wall surface with any approved shadeincluding cost of distemper and primer with conveyance Royalty, DMF, EMF & Additional Charges andof allmaterials and labour with T&P required for the work with Cess etc, complete in all respect as per direction of Engineer-in-charge.

Finishing wall surface two coats with any approved weather shield cement paint to outer wall surface after celaning surface including cost of paint watering curing with cost conveyance andof all materials and labour with T&P and Cessrequired for the work etc, complete in all respect as per the direction of Engineer-in-Charge.

Supplying fitting,fixing fully glazed aluminum framed openable windows using 15 micron anodized OEL aluminum section 2082 as out section, 9139 as mullion section, 4124 as shutter section frame with tapered clip of section 4125, aluminum angle, rubber beading,friction stay and handle etc with 5mm black glass including costof materials all labour with T&P & Cessrequired for the work etc complete as per direction of Engineer-in-Charge.

Providing fitting and fixing of false ceilling with Aluminium anodised T Section No. 3215 with 2,-0" center to center, L section No. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2'-0" x2'-0" suspended from ceilling including cost or materials all labour with T&P & Cess required for the work etc as per direction of EIC.