123/G/TC/Kanker/ Special Repair work of Residential and Non Residential Building Under P.W.D. (B/R)

NIT SCHEDULE FOR SPECIAL REPAIR WORK OF RESIDENTIAL AND NON RESIDENTIAL BUILDINGS UNDER SUB DIVISION NO.01 KONAGAON

SOR of Building Work for P.W.D.Date 10.06.2026 PAC Rs. :- 16.93 Lacs

S.NO. Chapter No. Item No. Sub Item No PARTICULER OF ITEM QUNTITY UNIT RATE AMOUNT

1 16 16.36 0 16.36 Dismantling terrazzo or mosaic or glazed vitreous or patent cement or tiled flooring or dado skirting of any thickness without sub base. 233.53 sqm 19

2 16 16.17 0 Dismantling G.I. sheet roofing including ridges hips, valleys and gutters etc. and stacking the material with 50 m lead. sqm 460.75 sqm 28

3 16 16.26 0 Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead. 28 each 85

4 16 16.27 0 Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.. 6 each 57

5 16 16.28 0 Taking out door shutters (steel or wood) including stacking within 50 metres lead. 38 each 40

6 16 16.29 0 Taking out window shutters (steel or wood) including stacking within 50 metres lead. each 33.50 16.30 Dismantling steel work in single section in RS Joists, channels, angles, flats, I-section and T-section including dismembering and stacking within 50 metres lead. 12 each 28

7 16 16.15 0 Dismantling thatch roofing including mats, bamboo, jaffri etc. complete including stacking of serviceable materials & disposal of unserviceable materials within 50 m lead. 56.52 sqm 9

8 16 16.43 16.43.1 Demolishing cement concrete including disposal of material within 50 metre lead. 1:4:8 or leaner mix 10.98 cum 280

9 10 10.11 0 Supply and fixing of precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. sqm 540.00 395.08 sqm 541

10 10 10.5 10.5.1 Providing ridges or hips of 60cm overall width in plain G.I. sheet fixed with galvanized washers J or L hooks, bolts and nuts 8mm G.I. limpet and bitumen washers complete. 1.00 mm thick sheet with zinc coating not less than 275gm/sqm 9 metre 507

11 10 10.5 10.5.3 0.63 mm thick sheet with zinc coating not less than 275gm/sqm 26.9 metre 378

12 10 10.1 0 Extra for providing and fixing wind ties of 40x6mm flat iron section. 214.79999999999998 metre 100

13 12 12.76 12.76.1 Providing and laying Glazed Vitrified floor tiles (GVT+PGVT) with digital print of random design with water absorption less then 0.05% and conforming to IS: 15622-2017 of 1st quality of approved make in all colours shades and size mentioned below(+/- 10 mm) land on 20 mm thick cement mortar 1:4 ( 1 Cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete- 150.79 sqm 819

14 8 8.1 8.1.2 Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position. Sal, bijasal, benteak, khair, haldu 0.5351600000000001 cum 51893

15 8 8.12 8.12.2 Providing and fixing flush door shutters, conforming to IS : 2202 (PartI), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. 35 mm. thick (single leaf) 15.96 sqm 1704

16 8 8.12 8.12.3 30 mm. thick (single leaf) 118.483 sqm 1557

17 8 8.99 8.99.1 Providing and fixing M.S. bright finished or black enameled sliding door bolts with bolts, nuts and necessary iron screws: 300x16mm 84 each 66

18 8 8.1 8.100.1 Providing and fixing M.S. bright finished or black enameled door latch with necessary iron screws: 300x20x6mm 68 each 45

19 14 14.62 0 Providing and applying Acrylic washable Distemper or lite economy Plastic emulsion paint having VOC content less than 50gms/ lit Minimum two coats up to final finish applied @ 1.25 Kg/ 10Sqm as per relevant I.S. Code 428:2000 (product such as Tractor Uno, Dulux Duval, Berger Bison, Opus Style/lite economy emulsion product such as Asian Tactor Spark , Dulux Pomise sheen, Neroloc Litil Master, Berger Bison Lite, Nippon Superio.) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour complete for the work. 1906.96 Sqm 54

20 12 12.3 12.3.2 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50 mm thick 279.8300000000001 sqm 216

21 12 12.36 12.36.1 12.36 Chequered terrazzo tiles 22 mm thick with graded marble chips of size upto 6mm in floors on 25mm thick bed of cement mortar 1:6 (1 cement : 6 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles including grinding rubbing and polishing complete. 12.36.1 Light shade using white cement 154.39000000000001 sqm 679

22 17 17.1 17.1.2 Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of rubbish to the dumping ground within 50metres lead : Thickness more than 15mm and upto 20mm 1364.48 sqm 126

23 17 14.85 14.85.1 Providing and applying for renewing Acrylic washable Distemper or lite economy Plastic emulsion paint having VOC content less than 50gms/ lit as per relevant I.S. Code 428:2000 (product such as Tractor Uno, Dulux acrylic distemper, Berger Bison, Opus Style/ lite economy emulsion product such as Asian Tactor Spark , Dulux Pomise sheen, Neroloc Litil Master, Berger Bison Lite, Nippon Superio.) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work. Two coats up to final finish applied @ 0.750Kg/ 10Sqm 1512.7399999999998 Sqm 34

24 17 17.7 17.7.3 Providing and replacing broken vitreous china water closet squatting pan (Indian type) including removing the broken squatting pan and mortar, cutting and making good the walls and floors wherever required: White Orissa pattern W.C. pan of size 580x440 mm 9 each 1605

25 17 17.8 0 17.8 Providing and replacing broken vitreous china water closet (European type W.C. pan) including removing the broken water closet (European type W.C. pan) cutting and making good the walls and floors wherever required : 17.8.1 White pedestal type each 5 each 1101

26 4 4.13 4.13.1 Grading roof for water proofing treatment with: Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 48.71849999999999 cum 3244

27 8 8.102 8.102.1 Providing and fixing M.S. bright finished or black enameled Tower bolts (Barrel type) with necessary iron screws: 250 mm 135 each 29

28 8 8.103 8.103.1 Providing and fixing M.S. bright finished or black enameled handles with necessary iron screws: 125 mm 190 each 43

29 14 14.71 0 Providing and applying satin/ matt finish Enamel paint mimimum 2 coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian satin Enamel, Dulux Promise Premium Enamel, Nerolac Synthatic Enamel, Opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work. 189.69 Sqm 113

30 7 7.4 7.4.1 Brick work with modular well burnt (open bhatta) clay bricks of crushing strength not less than 20 kg/sqcm and water absorption not more than 25% in foundation and plinth in: Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) 10.870000000000001 cum 2774

31 7 7.6 0 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 8.564 cum 2877

32 11 11.3 11.3.4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 165.6 sqm 91

33 1 1.1 1.1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. In all types of soils. 3.0300000000000002 cum 157

34 3 3.1 3.1.3 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). 4.54 cum 2525

35 9 9.3 9.3.1 Steel work in tubular (round, square or rectangular hollow tubes etc.) structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer. Electric resistance or induction butt welded tubes Grade-250 1320.55 kg 75

36 7 7.11 7.11.2 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 40 in superstructure above plinth level. Cement Mortar 1:4 (1 cement : 4 coarse sand) 8.200000000000001 sqm 325

37 18 18.6 18.6.1 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan including cutting and making good the walls and floors wherever required: White pedestal type 8 each 1003

38 18 18.8 18.8.1 Providing and fixing vitreous china 10 litre (full flush) capacity controlled flush low level cistern with all fittings complete. White 7 each 1134

39 18 18.9 18.9.1 Providing and fixing ISI marked plastic seat with lid for pedestal type W.C. pan complete: White/ black 8 each 527

40 18 18.9 18.9.2 Coloured 7 each 601

41 18 18.17 18.17.1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450 mm 5 each 1216

42 18 18.18 18.18.1 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : White Size 550x450 mm 6 each 796

43 18 18.55 18.55.1 Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 100 mm 7 each 52

45 18 18.76 18.76.1 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 75 mm dia pipe. 10 metre 155

47 19 19.4 19.4.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia .Pipes. 15 metre 94

48 19 19.4 19.4.2 20 mm nominal outer dia .Pipes. 10 metre 128

49 19 19.4 19.4.3 25 mm nominal outer dia .Pipes. 8 metre 169

50 19 19.5 19.5.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia .Pipes. 5 metre 113

51 19 19.5 19.5.2 20 mm nominal outer dia .Pipes. 5 metre 142

52 19 19.5 19.5.3 25 mm nominal outer dia .Pipes. 9 metre 181

53 19 19.6 19.6.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia pipes 10 metre 78

54 19 19.6 19.6.2 20 mm nominal outer dia pipes 8 metre 103

55 19 19.6 19.6.3 25 mm nominal outer dia pipes 15 metre 140

56 19 19.1 19.10.1 Making connection of G.I. distribution branch in G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: (dia of main line to be measured) 25 mm nominal bore 6 each 170

57 19 19.1 19.10.2 32 mm nominal bore 5 each 190

58 19 19.11 19.11.1 Providing and fixing G.I. Union in G.I. pipe (New work) including cutting and threading the pipe and making long screws etc. complete: 15 mm nominal bore 4 each 72

59 19 19.11 19.11.3 25 mm nominal bore 6 each 99

60 19 19.13 19.13.1 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality: Bib cock (250 grams) 10 each 157

61 19 19.13 19.13.2 Bib cock (350 grams) 12 each 201

62 19 19.13 19.13.3 Stop cock (350 grams) 10 each 201

63 19 19.14 19.14.1 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams) 4 each 325

64 19 19.14 19.14.2 Long nose bib cock (500 grams) 10 each 387

65 19 19.14 19.14.3 Long body bib cock (500 grams) 12 each 362

66 19 19.14 19.14.4 Piller Cock (400 grams) 16 each 338

67 19 19.14 19.14.5 Two way bib cock (800 grams) 12 each 602

68 19 19.14 19.14.6 Stop cock (concealed) (600 grams) 4 each 420

69 19 19.14 19.14.7 Angle valve for basin mixer and geyser points (450 grams) 4 each 325

70 19 19.14 19.14.8 Basin mixer pillar tap with spout (1000 grams) 10 each 1061

71 19 19.14 19.14.9 Kitchen sink mixer with cast swivel spout (1000 grams) 4 each 1061

72 19 19.14 19.14.10 Wall mixer with elegant knob (1400 grams) 4 each 1519

73 19 19.14 19.14.11 Hand shower set with flexible extension pipe 5 each 641

74 19 19.14 19.14.12 Bottle trap set with extension pipes 6 each 402

75 19 19.14 19.14.13 Toilet paper holder 6 each 211

76 19 19.14 19.14.14 Soap dish plate 6 each 139

77 19 19.14 19.14.15 Shower rose (revolving type) (150mm) 6 each 229

78 19 19.14 19.14.16 Towel rail (600mm long x 20mm dia) 6 each 287

79 19 19.14 19.14.17 Towel ring (150 mm dia) 7 each 216

80 19 19.14 19.14.18 Wall mixer (telephonic type) with crutch arrangement for hand shower (1400gms) 6 each 1499

81 19 19.14 19.14.19 Health foscet (hand jet) with flexible connection pipe (for WC) 5 set 658

82 19 19.14 19.14.20 CP brass water jet to be fixed in seat cover of WC with flexible connection pipe 27 set 490

83 19 19.15 19.15 Providing and fixing stainless steel drain jali of approved make/quality. 10 each 43

84 19 19.16 19.16.1 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 25 mm nominal bore . 10 each 371

85 19 19.16 19.16.2 32 mm nominal bore 15 each 434

86 19 19.4 19.40.1 Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes at site lead upto 50 metre : 80 mm dia C.I. pipe 18 metre 111

87 19 19.4 19.40.2 100 mm dia C.I. pipe 10 metre 115

88 19 19.4 19.40.4 150 mm dia C.I. pipe 10 metre 121

89 20 20.1 20.1.1 Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter 10 metre 138

SAY RS:- 16.93 lacs