Repair and renovation of washrooms minor repairs and allied works at SSH Jammu

Supplying/Providing/fixing of Push button ( Jaquar make )for wall embedding cistern incl, cost of material, labour etc complete. (The sample of Push button shall be approved from concerned sanitary incharge of concerned deptt.)

Labour engaged for cleaning of rooftop including disposal of mulba from rooftop to basement.

Disposal of mulba from basement to beyound muncipal limit including loading and unloading. Complete job.

Supplying/Providing/Fixing of health faucet ALD of superior quality including cost of material, labour carriage etc complete.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing 600x450 mm beveled edge mirror of superior glass(of approved quality) complete with 6 mm thick hard board ground fixedto wooden cleats with C.P. brass screws and washers complete.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete , Semi rigid pipe 32 mm

Providing and fixing 100 mm sand cast iron grating for gully trap.

Providing and fixing toilet paper holder C.P. brass

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc. 15 mm dia. nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work)

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make,weighing not less than 1.970 kg

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore

Supplying/Providing/fixing of PVC bend 100mm dia of superior quality including cost of material, labour etc complete.

Providing and fixing un plasticized P.V.C. connection pipe with PTMTnuts, collars and bush of approved quality and colour19.65.2 15 mm nominal bore with 45 cm length.

Cutting holes up to 30x30 cm in walls including making good the same:19.67.1 With common burnt clay (non modular) bricks

Supplying/Providing/Fixing of P.V.C Pipe of superior quality including cost material,labour etc complete.

75mm diameter

100mm 6Kg pressure

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm)of approved make and quality as per direction of Engineer-incharge

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour:Waste coupling 31mm of 79 mm length and 62 mm breadth weighing not less than 45gms.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:One urinal basin with 5 liter white P.V.C automatic flushing Flush

Engaging plumber for repairing of sanitary fixtures at different locations of hospital etc complete.

Supplying / providing / fixing of C. P phase of superior quality including cost of material, labour, carriage etc. complete job.

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape raking outjoints and preparing and plastering the surface of the walls completeincluding disposal of rubbish to the dumping ground within 50 meters lead14.1.2 With cement mortar 1:4 (1 cement : 4 coarse sand)

Supplying / providing / fixing of ACP sheet of superior quality including cost of material, labour, carriage etc. complete job.

Repairing of rigid pavement at different locations by way of micro concrete including cleaning of rigid surface by way of air compressor and laying of micro concrete in desired thickness at site including repairing of joints by cement plaster 1:1 ratio (1 cement, 1 fine sand) and curring for 10 days etc. including cost of material, labour, carriage, wastage etc. complete job.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In all colours, shades, except White, Ivory, Fume Red Brown

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Labour engaged for cleaning of ceramic floor / wall tiles by way of suitable tile cleaner incl cost of tile cleaner, labour etc . complete

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour or shade. (Area of slab upto 0.5 sqm)

Supplying/providing/fixing of 100mm x100 mm size anti skid floor tiles on existing ramp and other locations of building including cost of material, labour , carriage etc complete .

Supplying/providing/fixing of 8 to 10mm thick polycarbonated sheet of superior quality, incl. cost of material, labour etc.

Providing and fixing double action hydraulic floor spring of approvedbrand and manufacture IS : 6315 marked, having brand logo embossedon the body/plate with double spring mechanism and door weight upto125 kg for doors including cost of cutting floors, embedding in floors asrequired and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheetouter box with slide plate etc. complete as per the direction of Engineerin- plate etc. complete as per the direction of Engineer-in-charge. With Stainless Steel cover plate minimum 1.25 mm thickness

Supplying/providing/fixing of vitrified tiles on circular column including cost of material, labour , carriage etc complete .

Supplying/providing skilled labour for filling of gap between brick/r.c.c / A,C.P wall by way of cutting upto depth of 100mm minimum as required at site and embeeding of CGI / polycarbonated Sheet and filling with M15 mix including cost of material, labour, carriage etc. complete.

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter withbitumen and G.I limpet washers or with G.I. limpet washers filled withwhite lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch inhorizontal/vertical or curved surface)excluding the cost of purlins, raftersand trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2