Loading…
Loading…
Tender Value
Refer Docs
Closing Date
29 Jun 2026, 10:30 amClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
90 days
Expenditure
General
97
1 condition
Supply to be made as per the tender specification/condition.
26 conditions
[a] Please indicate whether you are registered with any of the following Micro & Small Enterprises (MSE) agencies : District industries Centre[s,KVIC, KVIB, Coir Board, NSIC, Directorate of Handicraft & Handloom or any other body specified by Ministry of MSME.[Name the agency clearly]. If yes, then for availing benefits under MSME Act, should upload valid documents maintained under MSME Act such as NSIC Certificate etc duly marking the tendered item in the certificate. Otherwise, claim for benefits under MSME Act may not be entertained and also indicate whether the Enterprise is owned by SC/ST/Woman. Please upload support of this. [b] If you are not a MSE or a consortia of MSEs formed by NSIC, please indicate percentage of sub contracts in execution of this tender that will be from Micro and Small Enterprises. [in percent of order value] with further breakup of MSE owned by SC/ST[Information will be provided in percentage terms with 6 fields; Micro owned by SC, ST, Others and Small Industries owned by SC, ST and Others]. Please refer para 15.0 Part B of tender conditions.
[a] All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per the GST Law. Firms must indicate its GST registration number along with their offer. [b] In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/SGST Act, The Railway shall deduct the applicable GST from his/their bills under Reverse Charge Mechanism (RCM) and deposit the same to the concerned tax authority. [c] The firm should indicate the tariff code (HSN Code) for claiming GST for the tendered item.[d] The offer shall be evaluated based on the GST rate as quoted by each bidder and same will be used for determining the inter-se ranking. While submitting offer, it shall be the responsibility of the bidder to ensure that they quote correct GST rate and HSN number. [e] It shall be the responsibility of the bidders to quote correct HSN number and corresponding GST rate. The Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate, if quoted by the bidder. [f] Wherever, the successful bidder invoices the goods at GST rate or HSN number which is different from that incorporated in the Purchase order, payment shall be made as per GST rate which is lower of the GST rate incorporated in the Purchase order or billed. [g] Vendor is informed that she/he would be required to adjust her/his basic price to the extent required by higher tax bill as per invoice to match the All inclusive Price as mentioned in the Purchase order. [h] Any amendment to GST rate or HSN number in the contract shall be as per the contractual conditions and statutory amendments in the quoted GST rate and HSN number, under SVC.
Railway is not bound to accept/Cancel the lowest or any tender or assign any reason for doing so and Railway reserves the right to accept/Cancel any tender in respect of the Whole or any portion of the items specified in the Schedule annexed (a or Tender Schedule) and the contractor shall be required to supply the same at the rate quoted.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
DELIVERY TERMS: F.O.R. DESTINATION BY ROAD AT CONSIGNEE END.
Make in India Preference Policy Please refer para 16.0 Part B of Southern Railway tender conditions uploaded in IREPS.
HSN CODE :Tenderers should mention the HSN CODE of the item and Rate of GST applicable. Firm's GST NO. and Firm's Banker details viz., Name & Address of the Bank Account No.., IFSC Code. and MICR No. in their E-Bid.
Purchaser shall have the right to levy general damages on the supplier for failing to comply with the contractual conditions, not by way of penalty, an amount equal to 5% of the value of cancelled quantity.
For inclusion in this tender, please mail your request to [email protected] with proof of successful performance and certificate.
Successful bidder after placement of PO to get the design approved from consignee before supply.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Inspection by Third party Agency for minimum order of Rs.5,00,000, else inspection by Consignee.
Land Border Condition: Bidder shall confirm to the following declaration [Land Border condition] "I have read the clause regarding restrictions on procurement from a bidder of a country which shares a land border with India. I certify that this bidder is not from such a country or , if from such a country, has been registered with the Competent Authority. I hereby certify that this bidder, fulfills all requirements in this regard, and is eligible to be considered. (Where applicable, evidence of valid registration by the Competent Authority shall be attached.)' along with bid for compliance of Office Memorandum of Department of Expenditure, Ministry of Finance dated 23.07.2020. If such certificate given by a bidder whose bid is accepted is found to be false, this would be a ground for immediate termination and further legal action in accordance with law. In case of non- submission of the above said certificate by a bidder, such bidder's bid is liable to be ignored."
1 location across Tamil Nadu · 4 Numbers total
SUPPLY OF COMPUTER TABLE, CENTER TABLE, DINING TABLE.Successful bidder after placement of PO to get the design approved from consignee before supply
97256132A
97256132A
Limited - Indigenous
Goods
Tamil Nadu
₹0
Exempted
29 Jun 2026
15 Jun 2026
3 items · 4 Numbers total
Supplying of Computer table size L4xW2x H 2.5 /216 CKB 1 drawer and 1 cupboard with keyb oard and cpu cupboard using 17mm pre laminated particle board with ebco fittings as per image and mode l. Design and Material: It has a rectangular tabletop and is typically made from high-grade engineered woo d with a laminate finish, offering durability and easy cleaning. Storage: The desk includes comprehensive st orage solutions. It features a built-in cabinet on one side, which usually includes both a lockable drawer and a lower compartment for files or personal items. Computer Integration: It is specifically designed for a comp uter setup, featuring a convenient sliding keyboard tray to save desktop space and a dedicated open shelf at the bottom for a CPU tower. Dimensions: A common size for this type of desk is approximately 120 cm in width, 60 cm in depth, and 75 cm in height. Successful bidder after placement of PO to get the design appr oved from consignee before supply. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/W/SA, SR | Tamil Nadu | 1.00 Numbers |
| Total | 1 Numbers | |
Supplying of Dining Table mahakani wood with cushion 6+1 Model table size (L6%u20190%u 201D x 3%u20196%u201D x H2%u20196%u201D) Glass Top with fittings as per image and model Design: The set features a blend of clean lines and modern curves, often in a white color scheme with contrasting b lack chair upholstery. Tabletop: The table can have a mahakani wood or natural stone tabletop,typically wit h a glossy finish and gently curved edges. Chairs: The chairs usually feature a padded back with envelopin g curves, upholstered in a durable, family-friendly leatherette material. Successful bidder after placement o f PO to get the design approved from consignee before supply. [ Warranty Period: 30 Months after the da te of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/W/SA, SR | Tamil Nadu | 1.00 Numbers |
| Total | 1 Numbers | |
Supplying of Center table compressed wood with glass type size (L4xW2x1.6)and 4 lags and under shelf as per image colour and model Materials: MDF or Sheesham wood frame, toughened glass tabl etop. Design: A simple,contemporary design with an open, airy expression that includes a slatted lower she lf for extra storage. Dimensions: Common dimensions are approximately 60 cm (D) x 110 cm (W) x 45 cm ( H). rectangular piece of furniture featuring a transparent glass top and a dark wooden frame with a slatted bottom shelf. The glass top is typically made of durable toughened glass,designed for longevity and resista nce to scratches. The base is constructed from an engineered wood material, such as MDF (Medium Densit y Fiberboard) or solid Sheesham wood, which gives it a luxurious look. Successful bidder after placement of PO to get the design approved from consignee before supply. [ Warranty Period: 30 Months after the dat e of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/W/SA, SR | Tamil Nadu | 2.00 Numbers |
| Total | 2 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5704369.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .