SPECIAL REPAIR TO BLDG NO P 2 88 AT MH UNDER GE SATWARI

Amount

B&R PORTION Dismanting floor, hearth or wall tiling (Terrazzo / PCC/ Ceramic tiles) including cement mortar bedding (but not backing), rubbish off the premises complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing surface with neat cement slurry with 3.0 kg of cement per sq. metre, removing serviceable tiles to store and rubbish off the Deffence area complete all as directed

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside Deffence area, complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) area not exceeding 1.5Sqm each including cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified & directed.

Taking down chowkats or frames with shutter w/o taking off shutter from the frame exc 1.5 sqm & n. exe 4 sqm each including cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified.

Refixing shutter of any desciption exc 1.00 Sqm and n exc 2.00 sqm each in same opening etc complete all as specified and as directed.

Taking down chowkats or frames with shutter (Aluminium door) (without taking off shutter from the frame) exc 1.5 Sqm & n.exc 4 Sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site all as specified.

Complete removal of existing roof treatment of any description viz. tarfelt or membrane surface or roof tiles etc. including grubbing up of tree roots and removing all the debris to a distance n.exc 100m and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove all loose dirt / dust etc and applying the following roof treatment complete all as directed:- (a) Applying Ist course of cement slurry @ 3 Kg per sqm. (b) Applying 2nd course of 15 mm thick cement screed in CM 1:4 over concrete surface with and including liquid water proofing compound as per manufacture's instruction. (c) Applying 3rd course of bituminious primer confirming to IS-3384 @ 0.4 lit/sqm over the screed bed. (d) Applying 4th course of a coat of binding material with blown type bitumen of grade 85/25 heating to working temperature of 180 degree Celsius and applied @ 1.2 kg/sqm. (e) Applying 5th course of APP (Atactic polypropylene) based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) laid with 75 mm side overlap and 100 mm overlap by forced / torch application as per manufactures instructions. (f) Applying 6th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180 degree C and applied @ 1.2 kg/sqm over APP membrane and applying a coat of aluminium paint, complete all as specified and directed.

4mm thick aluminium composite panel (coloured sheet) and in additional other accessories for fitting, complete all as secified and directed.

Supply and fix in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, complete all as secified and as directed.

Supply and fix in repair Brass Mortice lock with brass handles and fittings , 4 lever vertical type, size 100 mm including complete accessories complete all as specified. Make:- Links Locks/ Godrej

Pressed steel frames of size 125mm x 60mm made out of size 1.25mm thick MS sheet for doors double rebated including mild steel hinges medium weight 100 mm long and 25mm x 3mm flat iron in holdfast,tie bar including necessary fixing lugs, hold fast, lock strike plate and fixing arrangement etc complete as specified and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 including one coat of red oxide primer and PCC 1:3:6 as in back fill to chowkats, complete all as secified and as directed.

Pressed steel frames of size 105mm x 60mm made out of size 1.25mm thick MS sheet for doors single rebated including mild steel hinges medium weight 100 mm long and 25mm x 3mm flat iron in holdfast,tie bar including necessary fixing lugs, hold fast, lock strike plate and fixing arrangement etc complete as specified and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 including one coat of red oxide primer and PCC 1:3:6 as in back fill to chowkats, complete all as secified and as directed.

35mm thick 2nd Class hard wood glazed,gauzed and skelton shutters open rebated and prepare to receive glass, gauge etc but divided into squares with plain chamfered or rounded mitred and rebated sash bars, stiles and rails as specified in SSR Part-I Sec 8 clause 8.24 (a), complete all as secified and as directed.

Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as secified and as directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, fixed in opening as per specification & drawing, complete all as specified.

Factory made solid PVC moulded door(Pre moulded type) shutter 30mm thick (stiles) with 2,4 or 6 raised panel design with 2 mm thick moulded prelam PVC sheet on the front face & 2 mm thick Prelam sheet on the back face supplying and fixing in the frame at site complete all as specified & shown in MES Schedule (Part-II) and directed by Engineer-in-Charge.

Supply and fixed in repair mild steel helical ordinary rat tail rod pattern springs 300mm including roller and roller plate complete including fixing to pressed steel frames necessary welding work all as specified and as directed.

Supply and fixed in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge and for every 01 RM length, with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows. ( Including necessary fittings) complete all as specified and as directed.

Supply and fixing for stainless steel Butt hinges, of size 100mm , complete all as specified and as directed (ISI marked)

Aluminium anodised, barrel tower bolts size 200 mm of extruded section and fixed, complete all as specified. (ISI marked)

Aluminium handles, cast type, anodised Size-150mm, anodised section and fixed, complete all as specified. (ISI marked)

250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section and fixed, all as specified and directed.

140mm floor door stopper Aluminium alloy body and tounge, anodised with hard drawn steel spring, complete all as specified.

Glazed ceramic coloured Digital tiles on vertical surface 300x450x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface laid over and including cement plaster 10 mm thick in CM 1:4 all as specified.

Non skid Digital Ceramic joint less coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface laid over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

Vitrified Ceramic(Double Charged) edge cut joint free coloured or printed any shade tiles 10 mm thick (square/ rectangular) polished area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match laid over and including15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

Vitrified Ceramic(Double Charged) edge cut joint free coloured or printed any shade tiles 10 mm thick (square/ rectangular) polished area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm as in vertical surfaces dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match laid over and including a backing coat of CM 1:4, 10 mm thick complete all as specified and as directed.

Machine cut kota stone slab (Minimum size shall be 550x550 mm) flooring 18 - 20mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing complete, laid over and including screed bed or bedding layer of 20 mm thick in cement mortar 1:6, complete all as specified and as directed by Engineer-in-charge.

Factory made steel windows double shutter box type, outer frame made out of ERW TUBE 'P' section(65x45x25mm) and shutters of ERW TUBE 'P' section (50x35x20mm) openable shutters side hung includding pistol hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of 'Z' section as specified complete with sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitable fittings/openning for cooler/AC where required .Steel windows will be double shutter external glazed and internal wire gauzed complete all as specifed and as per Drg No CEPZ/TD-324/07 1/3 to 3/3 all as specified and directed by Engr-in-Charge. NOTE: The quoted rate against the above item shall also include (i) for Provn of one shop coat of zinc chromate primer on all exposed steel surfaces and one coat of coal tar on the ends of steel frame in contact with brick/conc surface (ii) 04 Nos MS Steel lugs of 20x5mm MS flat 20cm long over all welded to frames (iii) PCC block for embedding lugs.

Mild steel works of flat iron, square bar, round bars etc. as in framed work such as grills, guard bars, gratings etc incl bending, cutting and welding as necessary of confirming to Fe-290 (Gde E-165), complete all as specified.

3 mm thick sheet glass ordinary quality glazing with oil putty or any type of beads in square n.exc. 0.5 Sqm each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site complete all as specified (upto fourth storey with necessary scaffolding), all as specified.

3 mm thick figured glass, pin head type and glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site complete all as specified (upto fourth storey with necessary scaffolding), all as specified.

Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm, complete all as specified fixed with stainless steel wire staples.

Supply and fixed in repair Bib Cock with nozzle, cast copper alloy, chromium plated fancy type Quarter turn fix with iron pipe, 15 mm bore complete all as specified. Make :-Essco, Cat No:-SQT-512KN or of equivalent make as specified in Appendix 'F'

Supply and fixed in repair angle cock with wall flange, cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe, complete all as specified. Make:-Essco, Cat No- SQT-526KN or of equivalent make as specified in Appendix 'F'

Supply and fixed in repair Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-069) complete all as specified. Make:- Jaquar, Cat No:-CQT-23069K or of equivalent make as specified in Appendix 'F'

Supply and fixed in repair Sink Mixer with Swinging Spout (Wall Mounted Model) with Connecting Legs & Wall Flanges complete all as specified.Make:- Jaquar, Cat No- CQT-23309 or or of equivalent make as specified in Appendix 'F'

Supply and fixed in repair CP Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified. Make:- Jainko or of equivalent make as specified in Appendix 'F'

Sopply and fixed in repair PVC (SWR) P or S trap of 110mm dia, including jointing with solvent cement fixed, complete all as specified.

PVC (SWR) floor trap type 'B' of 110mm dia of outlet, plain with grating including jointing with solvent cement fixed, complete all as specified.

PVC (SWR) gully trap 125/110 mm type B, setting and jointing with solvent cement, complete all as specified

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed.

Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified.

Refixing old steel water tubing of 15mm bore and connections in new or old position fixed to walls, ceilings and floors etc. including fittings as requiered, complete all as specified.

Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed.

Steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified.

Refixing old steel water tubing of 20mm bore and connections in new or old position fixed to walls, ceilings and floors etc. including fittings as requiered, complete all as specified.

Taking up or down CPCV pipe of 20/25mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed.

20 mm outer dia CPVC pipe with all fittings (Brass Elbow, Brass reduser, Brass Tee, Female Brass Threaded Adaptor( FBTA), Male Brass Threaded Adaptor ( MBTA), Tank Adaptor, UNION, BALL VALVE, CPVC Flange and ect) and fixed complete wall and ceiling or laid in floors. Make:- Finolex, Kishan, Prayag.

25 mm outer dia CPVC pipe with all fittings (Brass Elbow, Brass reduser, Brass Tee, Female Brass Threaded Adaptor( FBTA), Male Brass Threaded Adaptor ( MBTA), Tank Adaptor, UNION, BALL VALVE, CPVC Flange and ect) and fixed complete wall and ceiling or laid in floors. Make:- Finolex, Kishan, Prayag.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings steps, cills, sunshades, shelves, lintels etc; and cutting cheses for concealed water tubing or concealed conduit wiring etc. and making good, cutting n.exc 10cm girth in brick work complete all as specified.

Supply and fix in repair chromium plated angular stop cock, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore complete, all as specified.

Supply and fixed in repair Vitreous China, wash basin white, flat back , size 550mmx400 including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass. complete all as specified and as directed by Engineer-in-charge.. Make :- Cera, Cat No- S2040119 or of equivalent make as specified in Appendix 'F'

Supply and fixed in repair PVC valveless,syphonic action type, flushing cistern, low level,white with inlet, ball valve, float and handle including brackets, PVC 32 mm 'L' bend of capacity 10.0 litres and making good to dismantled/damaged floor/surfaces, fixing in repair, complete all as specified and as directed by Engineer-in-charge. Make:- Cera, Cat No- B1010107 ( CABRINA) or of equivalent make as specified in Appendix 'F'

Supply and fix in repair WC Orissa pattern white with integral foot rest 580 mm x 440 mm including L bend, & PCC bedding in 1:2:4 type B-1, using 20 mm graded stone aggregate and making good disturbed floor connecting to trap and flush pipe compete all as specified. Make:- Cera, Cat Part No-S3010109 (COVYNA) or of equivalent make as specified in Appendix 'F'.

Supply and fix in repair Vitreous china ware pedestal type water closet white, with 'P' or 'S' trap including self closing seat cover, closed pattern with flat bottom, complete all as directed. Make:- Cera, Cat Part No- S1051103 of equivalent make as specified in Appendix 'F'

Supply and fix in repair Urinal (CAPRIANA in white colour) half stall with complete accessories Set, CP Waste Coupling, PVC waste pipe, sprader etc. Size: 375 x 390 x 590 mm complete all as specified. Make:- Cera, Cat No- S4020112 or of equivalent make as specified in Appendix 'F'.

Sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm x 203mm & bowl size 405mm x 354mm x 203mm complete with waste coupling & PVC waste pipe complete all as specified and directed by Engineer-in-charge. Make:- Prayag, Cat No- 1239D or of equivalent make as specified in Appendix 'F'.

Tubular towel rail, 20mm dia D type 60cm long between flanges of brass chromium plated, complete all as specified and directed. Make: Prayag Cat No-BA-20 or equivalent cat part No of Make as specified in Appx 'F' here in after.

Supply and fix in repair stainless steel gratings of outer frame dia 100 mm openable type incl all necessary fittings such as hinges including embeding in tiles with white cement. Make:- Prayag, Cat No- FT-03, or FT-04 or equivalent in Essco, Cera.

PVC connection 15mm size & 450mm long with PTMT nuts and washer, complete all as specified and directed. Make: Prayag Cat No-323 or equivalent cat part No of Make as specified in Appx 'F' here in after.

Brass chromiuam plated shower rose 125mm size with swivel joints, any size, including fixing to steel pipe or union, fixed in repairs, complete all as specified and directed.

Dismantling water tanks of any decription/pattern of RCC/PCC/PVC exceeding 250 ltr capacity but not exc 500 ltrs, complete all as specified.

Rotational moulded polyethylene water storage tanks of 500 litres capacity,(cylindrical vertical with closed top) triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections, complete all as specified

Dismantling water tanks of any decription / pattern of RCC/PCC/PVC exceeding 500 ltr capacity but not exc 1000 ltrs, complete all as specified.

Rotational moulded polyethylene water storage tanks of 1000 litres capacity,(cylindrical vertical with closed top) triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified.

20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed, complete all as specified.

20mm dia PVC ball valve high pressure of brass with epoxy coated aluminium rod and high density plastic ball screwed of iron pipe and fixed, complete all as specified. Make: Prayag Cat No 152 or equivalent cat part No of Make as specified in Appx 'F' here in after.

Rendering 10mm thick cement plaster in CM 1:6 on fair faces of bricks or concrete surfaces & finishing the surface even and smooth without using extra cement, complete all as specified.

Rendering 15mm thick cement plaster in CM 1:4 on fair faces of bricks or concrete surfaces & finishing the surface even and smooth without using extra cement, complete all as specified.

Rendering 10mm thck plaster in CM 1:3 as in ceilings and similar items finished even and smooth without using extra cement upto any height including all necessary scaffolding, complete all as specified and directed.

Preparation of newly plastered surface of wall and applying two coat of oil bound distemper, white or tinted shade over a coat of approved primer with & including wall care putty not less than 2mm thick over plastered surface of wall, complete all as specified.

Preparation of old decorated concrete / plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying two coat of oil bound distemper on old decorated wall surface with & including wall care putty not less than 2mm thick over plastered surface of wall, complete all as specified and directed.

Preparation of old painted steel surfaces of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Applying two coats of synthetic enamel paint over a coat of red oxide primer to new or previously untreated steel surfaces of any description, over 10cm width or girth including preparation of surfaces, complete all as specified and as directed.

Two coat of synthetic enamel paint over a coat of pink primer on new untreated wooden surface of any description, not otherwise described over 10 cm width or girth, incliding preparation of surfaces, complete all as specified and directed.

Preparation of old painted wooden or wood based surfaces of any description not otherwise described, over 10cm width or girth including knotting and stopping as required and applying one coat of synthetic enamel paint, complete all as specified and directed.

Preparation of old treated plastered surfaces of wall and applying two coat of cement base paint over a base coat of approved primer, complete all as specified and directed.

Preparation of old decorative plastered/concrete surface of wall, chajja, facia, face of columns, beam ect by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying one coat of weather proof exterior emulsion with necessary scaffoding up to 4th storey, with & including wall care putty not less than 2mm thick over plastered surface of wall, complete all as specified and directed.

Preparation of old decorated brick /concrete plastered /un-plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime white wash on the walls, pillars, cornices etc, complete all as specified and directed.

Preparation of new decorated brick /concrete plastered / un-plastered surfaces of walls, Pillars, cornices etc and applying one coat of white wash on ceiling, complete all as specified and directed.

Preparation of new plastered/concrete surfaces of walls, and applying two coat of cement based paint over one coat of primer, complete all as specified and directed.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and removing unserviceable material exc 100 mtr, complete all as specified.

Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified.

All as per ser Item No 88 above but except brick, complete all specified and directed

Brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4, complete all as specified.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically described complete all as directed by Engineer-in-Charge.

50mm thick PCC 1:3:6 Type C-1 (using 40mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection, finished the surfaces even & fair, joints filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified.

Dismantling PVC/cement/CI pipes incl fittings of different bore of pipes and removing to store ( 50mm to 110mm), complete all as specified.

UPVC (SWR) type 'B' pipes 50 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-in-charge.

UPVC (SWR) type 'B' pipes 110 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-in-charge.

UPVC (SWR) type 'B' pipes 110 mm bore single socketed, in any length with rubber ring joints fixed to walls , complete all as specified and as directed by Engineer-in-charge.

UPVC (SWR) type 'B' pipes 75 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-in-charge. Make -Astral,Supreme, Finolex

UPVC (SWR) type 'B' pipes 75 mm bore single socketed, in any length with rubber ring joints fixed to walls , complete all as specified and as directed by Engineer-in-charge.

UPVC (SWR), bends with access door for 75 mm bore, complete all as specified and as directed by Engineer-in-charge.

UPVC (SWR), bends with access door for 110 mm bore, complete all as specified and as directed by Engineer-in-charge.

UPVC(SWR), junction single, (single 'T') with access door equal or unequal for 75 mm bore , complete all as specified and as directed by Engineer-in-charge.

UPVC(SWR), junction single, (single 'T') with access door equal or unequal for 110 mm bore , complete all as specified and as directed by Engineer-in-charge.

UPVC (SWR) vent cowl 75 mm dia complete all as specified

Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof Complete all as specified.

E&M PORTION:- Taking down carefully unsv aluminium / copper conductor point wiring (light, fan, light socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.

Point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLS PVC insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLS insulated drawn in and including concealed PVC rigid conduit medium grade of 20mm bore or higher size ISI marked with & including MS sheet metal sunken / terminal box 1.2mm thick of required size / module including white cover plate with frames & all necessory wall cutting and making good disturbed surface and all items as per the requirement of the work at site for modular fittings like sitches, sockets, fan regulator, bell buzzer etc., complete all as directed and specified.

One light/fan/bell point controlled by one, one way switch 6 Amp complete all as specified.

One 3 pin socket outlet 6 amp independent complete all as specified.

One 3 pin socket outlet 6 amp on same board complete all as specified.

Description all as per srl item No 107 here in before but for one 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire.

Modular switch 1 way 6A, 1 module, (ISI marked), complete all as specified.

Modular Socket, 6A - 2/3 pin combined 2 module, (ISI marked), complete all as specified.

Modular switch 1 way 16A, 1 module, (ISI marked), complete all as specified.

Modular Socket, 6A/16A - 2/3 pin combined 2 module, (ISI marked), complete all as specified.

Ceiling rose (ISI Marked) 3 Phase PVC/poly carbonate, insulated body, compete all as specified.

Supply and fixing in repair Exhaust fan 300 mm sweep ,heavy duty, single phase AC 230/240V, with energy efficient motor ,pre-lubricated double ball bearing ,speed 900 rpm, complete with louvers for wall mounting incl grouting, holding down bolts, nuts, washers and provision of flexible copper conductor cable 3 core from ceiling rose to exhaust fan complete all as specified and directed. Make:-Bajaj cat part No-Supreme DLX HD or equivalent cat part of make as specified in Appx "B" here in after.

Exhaust fan PVC body 250 mm sweep, AC 230-240 Volts with & Power: 35 watts; Operating Voltage: 230 volts. Noise level 44 dB and the rated frequency is 50 Hz, Gravity Shutter: To prevent entry of foreign objects like dust, bird, pets etc ; Motor speeds (No.): 1 ; Rated Speed: 1200RPM and connected from ceiling rose/connector with & including opening of hole in existing wall, finishing/ making good of existing surface, suitable size flexible copper conductor PVC insulated seathed cord complete. Make: Havells, Cat No. FHVVEDXOWH10 Ventil Air Dx or Equivalent cat part of make as specified in Appx 'F' here in after.

LED wall mounted tube light fitting 9W complete Make Havells cat part NoLUMILINEBS9WLED830SPCWH or Equivalent cat part of make as specified in Appx 'F' here in after.

Batten holder PVC/Polycarbonate insulated body with back plate suitable for batten fitting all as specified and directed.

LED tubelight fitting for 18-20 Watt LED, 230V, Batten type complete in all respect . Cat Part No LUMILINEBS20WLED830SPCWH or Equivalent cat part of make as specified in Appx 'F' here in after.

Wintrip plug and socket DBs with MCB SPN 20 Amp powder coated sheet metal enclosure deep drawn including insulated neutral link, adjustable din rail and connected links all as specified and directed.

Sheet metal enclousure for MCB DB single pole and neutral 8 way with 200 Amps rated bus bar 240 volts double door type.

MCB single pole 'C' series 240V AC 6 to 32 Amps all as specified & directed.

MCB single pole & neutral 'C' series 240V AC 32 Amps all as specified & directed.

Sub main wiring with two single core PVC insulated,unsheathed, stranded copper conductor cable 6 Sqmm with 4 Sqmm PVC insulated, unsheathed, stranded copper conductor cable as earth wire in and including rigid PVC conduit 20mm dia or higher, medium grade ISI marked and earth wire connected to common earth point all as specified & directed. Note:-2 wire of 6sqmm, 1 wire of 4qmm and one run of pvc conduit shall be measured as one unit.

Earthing complete with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironincluding PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh, 15mm dia bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection pipe, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion. Note:- Rate for earth lead wire & protection pipe upto 7.5mtr length are inclussive in this item & no extra payment shall be admissible for the same.

M/S VIJAY KUMAR SHARMA

M/S BEE AAY CONSTRUCTIONS