PROVISION OF FURNITURE YARD ALONGWITH COVERED SHED AT NAJAFGARH UNDER GE(AF) TUGHLAKABAD

Amount

Demoliton of brick work built in cement mortar or cement lime mortar all as specified and directed

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out from site up to 100m all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out loose/soft soil all as specified and directed.

Excavating over areas, exc 1.5 m deep and n exc 3m deep getting out loose/soft soil all as specified and directed.

Providing and laying in position cement concrete of in foundation, filling and mass concrete, sub-base to flooringType D2, 1:4:8 ( 40 mm graded aggregate ) complete all as specifed and directed

M & L brick work with old size sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6. complete all as specified and directed.

Returning , filling in including spreading , levelling , watering and well ramming in layers not exc 25 cm in solft/loose soil complete all as specified and directed.

Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point all as specified and directed.

M&L 40 mm damp proofing course in cement concrete 1:2:4 type B-0 to horizontal/ vertical surface including necessary form work complete all specified and directed.

Supplying and filling in plinth, under floor & foundations and sand cushioing etc with sand , including watering, ramming, consolidating and dressing complete all as specified and directed.

M&L for 75 mm thick, PCC (1:3:6) type C-1 using 20 mm graded stone aggregates as in path , plinth protection and paving laid in panels finished even and smooth without using extra cement incl necessary formworkcomplete all as specified and directed. Note:- The groove demarcating panels shall be filled with hot blown bitumen

M & L Hard core of borken brick boulders n exc 63 mm, deposited , spread and levelled in layer n exc 15 cm thick , watered and rammed to a true surface complete all as specified and directed.

M & L 100 mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) complete all as specified and directed.

M&L 25 mm thick cement concrete type B-1 (using 20 mm graded agg) as in sub base for laying of floor tiles complete all as specified and directed.

Material and labour for Machine cut kota stone flooring 20-25 mm thick (size of kota stone slab not less than 55cm X 55cm) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish laid over and including 20 mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes and complete all as specified and as directed.

Material and labour for Machine cut kota stone 18-25 mm thick as in riser and treads of steps,skirting,dado including rubbing and polishing to mirror finish over and including 10mm thick backing plaster in CM 1:4 and brushing the surfaces with neat cement slurry @ 3Kg/Sqm complete all as specified and as directed.

M & L formwork to sides of concrete foundations, footings, bases of columns raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar workvertical or to batter rough finished surfaces of concrete complete all as specified and directed..

M & L formwork to sides of pillars, post, structs, piers, columns and stanchions in rough finished surfaces of concrete all as specified and directed.

M&L Form work to chullah hoods, chajjas, throught and similar items including edges with rough finish surfaes of concrete all as specified and directed.

M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams etc with rough finish surface of concrete all as specified and directed.

Providing and laying design mix cement concrete for reinforced cement concrete M-25 (20mm graded Aggregates) in foundation, including rafts, footings, foundation beams, plinthbeams, bases for columns, etc, basement slab, under rimmed piles and mass concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge

M & L Providing precast cement concrete B1 (1:2:4) cement mortar 1:6 drain cover ,in window or door cills, lintels, bressumers, steps, quoin blocks (for use with ma?sonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including cham?fers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and directed.

Providing and laying design mix cement concrete for reinforced cement concrete RCC, M-25 (20mm graded Aggregates) column, pillars, piers, posts and struts work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction and complete all as specified and directed.

Providing and laying design mix cement concrete for reinforced cement concrete RCC, M-25 (20mm graded Aggregates) chajjas work, Chullah hoods Chajjas , stairways (except spiral staircase) including steps (square or spandrill) string pieces, carriages,etc complete any section straight or winding , but excluding landings RCC water tanks upto 1500 litres. ; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement and complete all as specified and directed.

Providing and laying design mix cement concrete for reinforced cement concrete RCC, M-25 (20mm graded Aggregates) beams, cantilevers, bressumers, lintel over 1.5 mt span work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction and complete all as specified and directed. Note:- For Item No. 21,23,24 & 25: (i) The design mix shall be carried out from IIT/NIT/Govt institute/(NABL)Govt Approved lab. The same shall be approved by GE before using at site. (ii) The design mix shall be governed with latest IS 456.

M& L for 10 mm above Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing cracking, bending soirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securong with clips complete all as specifed and directed.

M& L for 6 to 8 mm Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing cracking, bending soirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securong with clips complete all as specifed and directed.

M& L for 5 to 10 mm in striuups Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing cracking, bending soirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securong with clips complete all as specifed and directed.

M & L 10mm thick plaster in C.M. 1:6 on fair surfaces of walls finished even and smooth w/o using extra cement complete all as specified and directed.

M&L 15mm thick rendering in CM 1:4 in two layers 10mm under and 5 mm top, the top layer mixed with WPC on fair surfaces of brick walls finished even and smooth w/o using extra cement complete all as specified and directed

Material and labour for Rendering 05mm thick on concrete surfaces in cement mortar 1:3 finished even and smooth without using extra cement to RCC ceiling, chhajjas, roof projection,fascia,fins,parapet, waist slab on RCC staircase etc and similar likes at any height including necessary scaffolding, ladder, formwork complete all as specified and directed.

Supply only ISI marked approved water proofing compound all as specified and directed..

Material and labour applying two coats of approved Oil Bound Distemper of approved shade over a coat of alkali resistant primer including preparation of newly plastered wall surfaces complete all as specified and directed.

M&L applying two coat of cement base paint white or tinted on newly plastered wall surface including preparation of surface complete all as specified.

M&L for Preparation of newly plaster surface of ceiling and applying three coats of white wash complete all as specified.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars in approved pattern of 10mm Sq bars, 3mm thick ISI marked ordinary glass fixed with necessary screws and oil putty dovetailed or welded complete all as specified and directed

Providing and fixing fly proof galvanized M.S. wire gauge to steel windows/ventilators and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, with necessary screws etc. complete as per specified and directed.

Providing and fixing aluminium hanging floor door twin rubber stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete all as specified and directed

S&F Rolled mild steel Roof trusses (framed), trussed purlins,crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. of Fe410 W (Gde-E-25) quality B complete all as specified and directed. Note: This rate is inclusive of one coat of red oxide primer. The red oxide primer shall be applied before fixing the items at required position.

S & F fe 410-W (Gde-E-250) quality-A) Rolled sections as in main and cross beams hip and jack rafter, purlins where connected to common rafters and running rails and guids for sliding doors, fixed with angle cleats or other connecting plate all as specified .

M&L plates Plain or chequered channels, Wind tie square cut (ordinary and counter sunk forming holes without any attachment confirming to Fe 410-W(Gde E- 250) quality A complete all as specified and directed..

S&F MS, screws, bolts (Machine made) with hexagonal or square heads at one end and screw the other or screw both ends dia bolt 12 to 20mm and long length of bolt exc 5cm but n exc 10cm.

Preparation of new steel surfaceof any description , over 10 cm in width or girth, not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed .

M&L pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any color having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

M&L pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any color having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F 0.71mm thick plain aluminium sheeting alloy 31000 H4 in ridges hips, valley gutter, drip valley gutter drip and straight flashing (length and grith as fixed complete all as specified and directed.

Supplying and fixing steel rolling shutters including ball bearing of appropriate size and approved make, made of 80x1.25 mm M.S. laths with 1.25 mm thick top cover, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 for steel rolling shutters including one coat of primer complete all as specified and direcetd.

Supply and fixing 1.25mm thick pressed steel frames for doors with single rebates of size 105 x 60 mm including necessary fixing lugs, lock strike plate, includig tarring back of chowkhat & hold fasts and filling with cement concrete 1:3:6 type C-0 complete as specified and directed.

Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows having rails and style of 2nd class hard wood, fixing with butt hinges of required size with necessary screws, including panelling of 12 mm thick prelaminated particle board with decorative lamination on one side and balancing lamination on other side flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, fixed with C.P. brass / stainless steel screws etc. including ISI marked Stainless Steel butt hinges with necessary screws , all complete as per direction and complete all as specified and directed.

Providing and fixing 300x10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed

Providing and fixing 250 x 16 mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete all as specifed

Providing and fixing 125 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc complete all as specified and directed

M&L for Painting with synthetic enamel paint of approved brand and manufacture to give an even shade on wooden Surfaces of any description, over 10cm in width or girth,not otherwise described over pink primer incl preparation complete all as specified and directed.

M&L complete for wiring with cable of size 1.5 sqmm single core copper multistrand conductor including continuous earth wire, using cable FRLS insulated(unsheathed) 1100 volts grade conforming to Is-694 drawn in to and including concealed pvc rigid conduit medium duty with all fittings and fixing accessories for followings:-

(a)one light point controlled by one, one way switch

(b) one fan point controlled by one, one way switch.

(c ) one 3 pin socket out let 5 amps on independent board.

(d) one 5 pin 5 amps socket point in same board with other switches.

(e) one 3 pin socket out let 16 amps independent board but with cable of size 4.0 sqmm in point wiring and 4.0 sqmm in continuous earth wire .

M&L Complete For modular switch one way 6 amps 1 module complete all as specified and directed.

M&L Complete For modular switch one way 16 amps 1 modulecomplete all as specified and directed.

M&L Complete for modular socket 2 in 1, 5 pin 6 amps 2 module complete all as specified and directed.

M&L Complete for modular socket 2 in 1, 6 pin 6A/16 amp 2 module complete all as specified and directed.

M&L complete for ceiling rose surface Bakelite 3 terminal complete all as specified and directed.

M&L complete for modular fan regulator stepped type120 watt 2 module complete all as specified and directed.

S & F complete modular metal flush box 2 module including cutting of chasis and making good disturbed surfaces and rate deemed to included in quated rate complete all as specified and directed.

S & F complete modular metal flush box 3 module including cutting of chasis and making good disturbed surfaces and rate deemed to included in quated ratecomplete all as specified and directed.

S & F complete modular metal flush box 4 module including cutting of chasis and making good disturbed surfaces and rate deemed to included in quated rate.

S & F complete modular metal flush box 6 module including cutting of chasis and making good disturbed surfaces and rate deemed to included in quated rate complete all as specified and directed.

S & F modular metal flush box 8 module including cutting of chassis and making good disturbed surfaces and necessary accessories complete all as specified and directed.

S &F complete for modular white cover plate with frame 2 module complete all as specified and directed.

S &F complete modular white cover plate with frame 3 module and complete all as specified and directed.

S &F complete modular white cover plate with frame 4 module and complete all as specified and directed.

S &F complete modular white cover plate with frame 6 module complete all as specified and directed.

S &F complete modular white cover plate with frame 8 module and complete all as specified and directed.

M & L complete for pvc/polycarbonate type Lamp holder, insulated body, with back plate for batten fittings and complete all as specified and directed.

Supply and fixing LED lights fitting 1x 18W, 220V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high ressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics omplete with IP 65/66 protection complete all as specified and direted.

M&L complete wiring for circuit/submain wiring alongwith earth wire with the 2x2.5 sq mm and 1x2.5 sq mm as in continuous earth wire drawn in to & including pvc conduit medium ISI marked of FR is PVC insulated copper conductor, single core cable in surface/ recessed as required complete with fittings and fixings accessories laid concealed complete. and including necessary cement work complete all as directed.

M&L complete for sub main wiring with single core copper multi strand conductor FRLS insulated (unsheathed) cable of size 2x06sq mm and 1x6 sq mm as in continuous earth wire drawn in to & including pvc conduit medium 25mm dia ISI marked complete with fittings and fixings accessories laid concealed complete. and including necessary cement work complete all as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all necessary arangement of hanging of ceiling fan (GI Pipe hook etc ) as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450 mm sweep heavy duty with, blades, and frame and louversr / grill and connection complete all specified and directed .

M&L complete for distribution board, sheet steel, powder coated for MCCB s with copper bus bar, neutral link and earthing stud conforming to IS 13032/IS 8623 TPN vertical 4 ways double door for three phase out going complete all as specified and directed.

M&L complete for MCB distribution board, sheet steel, phosphatised, powder printed with bus bar, neutral link, earth bar & din rail conforming to IS 13032/IS 8623 SPN dist board 08 ways double door including connection omplete all as specified and directed.

Supply and fixMCCB 3 Pole, 415 V, fixed type, 25 to 100 Amps with breaking capacity 16 KA including necessary accessories all as specified and directed

M&L complete for Isolator triple pole 240 volts, 63 Amp and complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve mainiature circuit breaker (MCB) of following poles complete with connection testing and commissioning :-

(i) SP 5 to 32 Amp

(ii) SPN 40 Amp

Excavation in trenches in soft/loose soil, n.exc 1.5 mtr wide and n.exc 1.5 mtr deep and getting out in soft/loose soil for laying of cable/foundation of pole and stay etc in complete all as specified and directed.

M&L for sand cushioning in trenches for protection of LT underground cable including watering and consolidation complete all as specified and directed .

Supply and laying well burnt sub class ‘B’ bricks, locally available of size 23x11.5x7.5 CM (+_8% tolerance) in trenches for protection of underground cable complete all as specified and directed.

Removing excavated materials not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above ground level from starting point complete all as specified and directed.

Returning filling including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core all as specified and directed .

M&L complete for earthling with galvanized mild steel earth plate electrode 600x600x6mm thick buried directly in ground ( in vertical position ) earth pit not less than 2.25 mtr below normal ground level with the top edge of the earth plate not less than 1.5mtr (B.G.L.) and connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washer of galvanized iron including PCC(1:2:4) type B1 precast RCC cover slab with suitable handle made of 12mm round bar, including necessary excavation &earth work in any type of soil. 20mm dia med gde galvanized steel tube for watering with one end fixed with cast iron funnel and wire mesh, 40 mmdia bore, light grade galvanized steel tubing up to 7.5 mtr length for drawing earth lead wire protection common salt, charcoal etc complete all as shown in EP No 3 of SSR Part 1 and testing on completion.

Schedule of Credit

MOHIT ENTERPRISES

Balaji Constructions

Shivom Projects Private limited