Repair/replacement of existing LT Electrical system includign LT UG cable MCCB S LT Panel change over switches and other allied work in ACCS New KLP Area under GE(N) Ahmednagar

Amount

Dismantling carefully the existing LT overhead line ACSR of any size from its position by necessary disconnecting of conductor and removing etc complete all as specified and directed by Engineer-in-Charge

Dismantling of unserviceable insulator of any type complete from its position and removing etc complete all as specified and directed by Engineer-in-Charge

Dismantling of unserviceable existing cross arms made from channels, angles and unserviceable FI clamps, nuts, bolts etc from OH line and removing etc complete all as specified and directed by Engineer-in-Charge

Dismantling of existing LT poles carefully of any size and type from its position carefully and removing from the site and necessary excavation and earth work in any type of strata, demolition of concrete, disconnecting of conductor etc complete all as specified and directed by Engineer-in-Charge

S&F stay assembly complete with accessories as shown in Electrical Plate No 1 of SSR 2009 (Part I) using stay rod 20mm dia, including clamps made out of 50 x 6mm MS flat, MS galvansied stay plate 300mmx 300mm x 6mm and galvanised thimble including insulator 90x140mm etc complete all as specified and directed by Engineer-in-Charge (loop type insulator, stay clamps, excavation and concrete shall be measured and paid separately u nder relevant item of this BOQ

M&L for prunning and removing of tree branches touching to electric over head lines wild growth around LT /HT over head lines and around pole and stay complete to make clear span of 2 Mtr of tree both side of the OH line with JCB, Cutter and all tools, plants etc complete all as specified and directed by Engineer-in-Charge Note : (i) Distance between pole to pole will be measured and paid. (ii) Contractor has to take upmost care to avoid damage to existing lines/structures if Any breakdown of line caused during punning shall be made good without any extra cost. (ii) Prunning of tree to be done twice a year (before & after rainy season) (iii) The contractor has to ensure the proper safety of the tradesmans to avoid any mishappening. If any mishappening occures the contractor will be solely responsible for it.

Supply, erecting and fixing in replacement of true vertical position of steel tubular swaged pole, 9 m long complete with cast iron base plate, finial taper plug, bolt, nuts and screws as specified and of type 410 SP-31, conforming to relevant IS, including one primer coat of red oxide and two coats of aluminium paint and two coats of bituminous paint inside and outside of botton portion up to 1.8 m length all as specified and provide circular bend 1 No of length 2 m complete all as specified and directed. (Excavation and earth work , foundation concrete and PCC coping shall be measured and paid separately)

M&L for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers etc welding bending cold or hot, drilling holes for bolts , in any shape or size as indicated or directed and inclusive of one coat of red oxide primer, one under coat and one finishing coat of aluminium paint etc complete all as specified and directed by Engineer-in-Charge

M & L for replacement of Pin type, porcelain, vitreous, white,brown or green insulator including one galvanised mild steel spindle,two galvanised iron washers and one galvanised iron nut, 100mm height, 65mm dia for 1100 volts grade etc complete all as specified and directed by Engineer-in-Charge

M & L for replacement of shackle Type, Porcelain, vitreous, white, brown or green insulator including galvanised mild steel straps, washers,insulator bolts, washers and nuts, 100mm height and 115mm dia including two nos of galvanised steel strap of size 31x5mm fitted with 14mm dia bolts and nuts etc complete all as specified and directed by Engineer-in-Charge

Labour for restringing of LT over head line consisting of 4/5/6 conductors retrive from ser item no-01 by dismantling taking down,unserviceable , damged ACSR, repairing wherever required including cutting, re-joining and restringing in, with proper sag, binding to insulator with and including aluminium binding wire etc complete all as specified and directed by Engineer-in-Charge Note : (i) Only good and serviceable conductors shall be used, unserviceable conductors will be credited to contractor under schedule of credit. (ii) Rate of Transporting of conductor from one site to another site is included in the quoted rate.

Supply, fixing and stringing ACSR (Weasel/ Ferret) for over head line securing on pole complete including binding wire, jointing sleeves aluminium tap and PG clamp etc of any size etc complete all as specified and directed by Engineer-in-Charge (Note :- (a)jumper on cutout point/2 pole structured / 4 pole structure shall be provided with PVC insulated sleeve. (b) quoted rate is inclusive of jumpers materials & tree branch cutting to make a safe distance from over head line.)

Excavating in trenches n exc 1.5 m wide and n exc 1.5m in depth , for foundation ,etc or for shafts, wells , cesspits, main holes etc.n exc 10 sqm on plan and n exc 1.5 mtr depth and getting out on soft/ lose soil and added additional 1.5 m or part thereof in depth beyond the first 1.5 m etc complete all as specified and directed by Engineer-n-Charge

All as per ser item No 13 (here-in-before) but hard/ dense soil

Returning, filling in, including spreading , levelling , watering and well ramming in layers not exc 25cm of any soil etc complete all as specififed and directed by Engineer-in-Charge

Removing excavated materials(soils) n exc 50m and depositing where directed at a level n exc 1.5m above the starting point.

Supply & lay HDPE pipe 65mm bore for laying of LT cables etc complete with all accessores etc complete all as specified and directed by Engineer-in-Charge

Supply and Laying in trenches or drawn through pipe or fixed on wall / poles , LT UG cable 1100 Volts, heavy duty XLPE insulated, screened, PVC bedded, galvanised steel strip or wired armoured with aluminium conductor after removing old one of following size etc complete all as specified and directed by Engineer-in-Charge

10 Sqmm, 2 core

16 Sqmm, 2 core

10 Sqmm ,4 Core

16 Sqmm, 4 core

25 Sqmm, 4 core

35 Sqmm, 31/2 core

50 Sqmm, 31/2 core

70 Sqmm, 31/2 core

95 Sqmm, 31/2 core,

120 Sqmm, 31/2 core

M&L for GI pipe light grade 40 mm dia with all fitting and fixed complete to walls and ceilings or laid in floors complete for protection of cables etc complete all as specified and directed by Engineer-in-Charge

All as item No 29 (here-in-before) but 50mm dia tubes

All as per Item No 29 (here-in-before) but 80 mm dia tubes

M & L for making good the damaged Tar Road by using additional stone metal, PCC etc complete all as specified and directed by Engineer-in-Charge

Demolation of u/s cement concrete in coppings etc complete all as specified and directed by Engineer-in-Charge

M&L for cement concrete (1:3:6 ) type D2 using graded stone aggregate as in Copping of pole including necessary form work etc complete all as specified and directed by Engineer-in-Charge

M & L for PCC(1:4:8) type D-2 using 40mm grade stone aggregates as foundation of pole and similar work etc complete all as specified and directed by Engineer-in-Charge

M & L for repair of LT Panel board of any size with replacing the unserviceable MCCB,MCB,switch fuse unit , change over ,Busbar,etc jointig cable with proper lugs ,nut , bolt and washers, cleaning the panel by using of CRC Soluation and repairing thhe panel door by using hinges and repairing the lock system, welding etc painting the LT Panel wit one coat of primer & two coat of synthetic enamel paint as approved or etc complete all as specified and directed by Engineer-in-Charge Note:(i) MCCB,MCB,Switch fuse unit and change over switch shall be measured and paid separately. (ii) Labour for MCCB, MCB, Switch fuse unit and change over switch shall be measured and paid separately. (iii)Rate of new Busbar, lugs,CRC Solution,nut,bolt, painting etc and washers are deemed to be included in quoted rates.

Supply and fixing in replacement of MCB TPN 63 Amps with breaking cap 16 KA and connecting etc complete all as specified and directed by Engineer-in-Charge . Make : Legrand Cat Part No DPX3 160,420003 of its equvalent in makes mentioned in list of makes in Appendix `C'

All as per item No 37 (here-in- before) but 40 Amps MAKE: Legrand Cat Part No DPX3 160 420002 of its equvalent in makes mentioned in list of makes in Appendix `C'

Supply and fixing in replacement of MCB DP, 40 Amps with 10 KA breaking / rupturing capacity including neccssary connection etc complete all as specified and directed by Engineer-in-ChargeMAKE: Legrand Cat Part No DX3MCBs 408637 or its equvalent in makes mentioned in list of makes in Appendix `C'

All as per item No 39 (here-in-before) but 20 Amps Make: Legrand Cat Part No DX3MCBs 408634 or its equvalent in makes mentioned in list of makes in Appendix `C'

Supply and fix in replacement MCB, SP, 6 to 32 Amps 10 KA breaking / rupturing capacity capacity including necessary connection with suitable size of copper cable etc complete all as specified and directed by Engineer-in-Charge MAKE: Legrand Cat Part No DX3MCBs 408636 or its equvalent in makes mentioned in list of makes in Appendix `C'

Supply and fix in for replacement rewirable switch fuse unit,of sheet metal , triple pole and neutral, 415 Volts grade, 32 Amps capcity including neccssary connection with suitable size of copper cable etc complete all as specified and directed by Engineer-in-Charge Make: CAT No#DTPN032 OF Indoasian .or its Equvalent.in makes list of makes in Appendix `C'

All as Per item No 42 (hre-in-before) but 63 Amps capcity . MAKE: CAT No #DTPN063 OF Indoasian or its equvalent.in makes in list of makes in Appendix `C'

All as Per item No 42 (here-in-before) but 100 Amps capacity. MAKE: CAT No #DTPN100 OF Indoasian or its equvalent.in makes mentioned in list of makes in Appendix `C'

Supply and fix in existing panel board for replacement of Switch Disconnector fuse (Cubical with HRC Fuse) Tripple pole and neutral 100 Amps ,415Volt,50HZ,AC 23A, conforms to IS:13947-3, fixed in existing Panel and connecting etc complete all as specified and directed by Engineer-in-Charge MAKE: CAT No SK95571 of L&T or its equvalent.in makes mentioned in list of makes in Appendix `C'

Supply and fix in existing panel board for replacement of Switch Disconnector fuse (Cubical with HRC Fuse) Tripple pole and neutral 200 Amps ,415Volt,50HZ,AC 23A, conforming to IS:13947-3, fixed in existing Panel and connecting etc complete all as specified and directed by Engineer-in-Charge MAKE: CAT No SK95607 of L&T or its equvalent.in makes mentioned in list of makes in Appendix `C'

Supply and fixing in existing panel board for replacement MCCB, 4 Pole, 400 Amps , with breaking capacity 36 KA , fixed type(HBC Series),adjustable type thermal setting 70-100% and magnetic adjustable 5-10 times AC 415 volt ,50 HZ conforming to IEC:60947-II/IS:13947-II and connecting etc complete all as specified and directed by Engineer-in-Charge MAKE: CAT No Legrand Cat Part No DPX3 630, 422007 or its equvalent.in makes mentioned in list of makes in Appendix `C'

All as per item No 47 here in above but 200 Amps 25 KA breaking capacity. MAKE: CAT No Legrand Cat Part No DPX3 250, 420218 or its equvalent.in makes mentioned in list of makes in Appendix `C'

All as per item No 47 here in before but 100 Amps 25 KA breaking capacity. MAKE: CAT No Legrand Cat Part No DPX3 250, 420215 or its equvalent.in makes mentioned in list of makes in Appendix `C'

All as per item No 47 here in before but 63 Amps 25 KA breaking capacity. MAKE: CAT No Legrand Cat Part No DPX3 160, 420053 or its equvalent.in makes mentioned in list of makes in Appendix `C'

Supply and fix in repairs/replacement of GI continous earth wire 4mm dia on cross arms of poles for guarding including binding and dismentling of old broken guarding etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs change over switch existing panel, wall or LT pole of any size and any type on load type, triple pole and neutral, 63 Amps, 415 V, 50 Hz front handle operated, including connecting and testing etc complete all as specified and directed by Engineer-in-Charge MAKE: CAT No CO10630OOOD of L&T or its equvalent.in makes mentioned in list of makes in Appendix `C'

All as per Item No 42 above but off load type and side handle operated,Conforms IS/IEC 60947 including connecting and testing etc complete all as specified and directed by Engineer-in-Charge MAKE: CAT No OFFPOO63 of Indoasian or its equvalent.in makes mentioned in list of makes in Appendix `C'

All per item No 42 above but , off load type, 100 Amps, front handle operated, MAKE: CAT No OFFPO100 of Indoasian or its equvalent.in makes mentioned in list of makes in Appendix `C'

All as per item No 42 above but off load type, 125A side handle operated, MAKE: CAT No OFFPO125 of Indoasian or its equvalent.in makes mentioned in list of makes in Appendix `C'

Supply and fix in replacement of surface mounted SMC street light control box of external dimensions 250 X 175 X 100 mm, fixed on pole with FI clamps of size 25 X 3 mm etc complete all as specified and directed by Engineer-in-Charge MAKE : SINTEX/National

M & L for replacement of existing Amp meter (0-300Amp) along with CTs from existing LT Panel of any size etc complete all as specified and directed by Engineer-in-Charge

M & L for replacement of existing Volt meter 0 to 600 volt , digital type from existing LT Panel of any size, etc complete all as specified and directed by Engineer-in-Charge

Material and labour for spray painting the LT Steel tubular pole,9 mtr long with two coats of synthetic enamel paint including prepartion of surfaces,Scraping the old paint and writing pole No in Black letter under yellow circle etc complete all as specified and directed by Engineer-in-Charge

Material and labour for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick, buried vertically in ground (Each pit not less than 2.25 mtrs deep below normal ground level with top edge of plate not less than 1.50 M below normal ground level) connected to GI strip 32 x 6 mm , by means of bolts, nuts, and check nuts and washers etc encased in GI protection pipe 40 mm dia light grade pipe for protection of GI earth strip both to be provided to the extet of 7.5 meters, all as shown on electrical plate No 3 of MES SSR - 2009 Part - I, GI protection pipe buried in ground, laid under floors / plinths or mixed on walls / pole etc or concealed in walls etc; with provision of mixture of charcoal dust and common salt packed upto minimum 150 mm all around the earth plate, including PCC 1:2:4 type B-1 earth pit with M.S angle iron frame, cast iron cover with locking arrangement, with GI 20 mm dia medium grade pipe and MS funnel with wire mesh for watering arrangement, including necessary excavation and earth work in any type of soil / strata and testing on completion etc complete all as specified and directed by Engineer-in-Charge Note:- i) Cost of GI strip 32 x 6 mm and protection pipe 40 mm dia is deemmed to be included in rate quoted (upto 7.5m) ii) Excavation and returning filling of Soil any type is deemed to be included in rates.

S&F in replacement of drop out fuse unit, explusion type for out door air break gang oprated switch, single pole mounted on and including insulators for 11 KV working pressure fixed to and including MS channel with nuts, bolts and washer etc synthetic bounded fuse tube complete with line capcity suitable for current carrying capacity upto 100 Amps all as directed including taking down old one etc complete all as specified and directed by Engineer-in-Charge

Repair / Overhauling of air break switch by replacing stationary and moving contacts, flexible copper chord, GI nuts, bolts etc including alingment for smooth functioning from ground level all as required at site and etc complete all as specified and directed by Engineer-in-Charge.

Supply & fix LT line seperator 3/4 lines made of high quantity PVC material to provide 300 mm distance between phase to phase and neutal or as per sit reuirement etc complete all as specified and directed by Engineer-in-Charge Make : Superme & Co Pvt Ltd Sanjay casting and Engineers, Mahalaxmi Cable & Conductot

Supply and fixing FRP fencing made up with using FRP rod 12 mm dia,channel size 50 x 24 x 4 mm box section 50 x 25 mm 'I' section 38 x 15x3 mm and square box section 50 x 50 mm in post embeded in plain cement concrete (1:4:8) type D2 using 20 mm graded stone aggregate (45 cm x 45 cm x 45 cm) including necessary excavation and earthwork at 1.25 m C/C with height of fencing 2 m from GL including entrance gate of size 1m x 2m of same material.MS aldrop bolt 300 mm long,150 mm size pressed steel handles and 2 Nos tower bolts MS hinges as required etc complete all as specified directed by Eningeer-in-Charge. Make Sintex or equivalent as approved by GE Note:- Verticle posts and rail section shall be manufactured of fibre glass reinforcement min 45% and formulation of polystrbased thermoset resigns

Supply ,Installing, commissioning and testing in replacement LT panel board, factory made, out door, cubical type , cubical type, vermin proof , dust proof, water proof made out of 3.15 mm thick CRCA sheet and inner sheet of 2.0mm thick and angle iron frame of size 50x50x5mm inside depth not less than 50 cm and size suitable to accommodate the following accessories, with insulated alluminium busbar 600amps capacity , 3 phase , 4 wire system, both sides openable (front and back), locking arrangement with CPRI approved , including cable trench duly painted with power coated with RAL 7032 internally and externally connecting with existing cable with lugs including internal wiring with copper cables of suitable size using lugs comprising the following accessories etc complete all as specified and directed by Engineer-in-Charge

(a) MCCB 200 Amp four pole with Breaking Cap 25 KA-01 No (Incoming) MAKE: CAT No Legrand Cat Part No DPX3 250, 420219 or its equvalent.in makes mentioned in list of makes in Appendix `C' (b) MCCB TPN 63 Amps TPN with breaking cap 16KA - 02 Nos (For Out Going) Make:- CAT No Legrand Cat Part No DPX3 160, 420013 or its equvalent.in makes mentioned in list of makes in Appendix `C' (d) Volt Meter (digital Type (0 T0 600 Volts)-01 No (e ) Ammeter (digital type) with Cts 0-300Amps)-01 No (f) Phase indication lamps LED type with holder-01 Set(Set of Three) Notes:- The rate quoted includes for earth work and excavation for angle iron frame for foundation of panel board up to 0.50 m below GL in any type of soil and PCC 1:4:8 type D2 (using graded stone aggregates) filling in foundation. The ground clearance of panel board shall be 0.40 M from GL to the bottom of panel board.

Supply and Laying PCC Covers class LV type-1 flat size 300x180x40mm etc complete all as specified and directed by Engineer-in-Charge.

Supply and spread unwashed dry river sand cushioning and covering the under ground cable in trenches etc complete all as specified and directed by Engineer-in-Charge. Note : Punning thickness shall be measured)

An amount of Rs 1,07,353.00 shall be deducted from BOQ on account of schedule of credit

AZAD SERVICES

M/s Renuka Enterprises

m/s shivam tools and equipment

KOYNA ENGINEERS PVT LTD

BHAVIN INFRA

OM SAI ASSOCIATES

R. T. Saluji