Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.1 CrAccepted-AOC | ₹2.1 Cr | L1 | Accepted-AOC Being L1 |
| 2 | Rejected-Technical | - | - | Rejected-Technical Not meeting NIT criteria |
| 3 | Rejected-Technical 001 BHOOMI COLOSSA PLOT NO 04 SECTOR 19 AIROLI NEW MUMBAI 400 708 | NEW MUMBAI | THANE | MAHARASHTRA | 400708 | - | - | Rejected-Technical Not meeting NIT Criteria |
| Sl No | Description | Qty | Unit | shoiab construction L1 |
|---|---|---|---|---|
| 1.00SECTION 1 - CARPENTRY WORKS | ||||
| 1.01 | Providing and Fixing Homogeneous 2.00 mm thick PVC sheet/tile in flooring and skirting of approved make in approved pattern on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer including, levelling small undulations with plaster of paris if required, rolling with light wooden roller weighing about 5kg all complete as directed by Engineer-in-charge in approved colour and shade | 250 | SqM | 800 ₹2,00,000 Lowest |
| 1.02 | Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately)
a) Colored Anodised Aluminium sections (Minimum anodizing thickness of 15 micron) | 2,000 | Kg | 600 ₹12,00,000 Lowest |
| 1.03 | Providing and fixing 12 mm thick pre-laminated particle board flat pressed 3 layer or graded wood particle board conforming to IS
12823 Grade-I, Type - II in panelling fixed in aluminium doors, windows, shutters and partition frames with C.P Brass / Stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge Prelaminated particle board with decorative lamination on both sides | 200 | SqM | 1,500 ₹3,00,000 Lowest |
| 1.04 | Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)
a) With clear float glass panes of 6.00 mm thickness | 150 | SqM | 1,500 ₹2,25,000 Lowest |
| 1.05 | Providing and fixing double action hydraulic floor spring of approved brand and manufacturer (conforming to relevant Indian Standard) for doors including cost of removing & re-fixing of existing door shutter, cutting floors as required, embedding in floors and cover plates with M.S pivot and single piece of M.S sheet outer box with slide plate etc. complete as per directions of Engineer-in-charge with brass/SS cover plate. | 10 | Nos | 5,000 ₹50,000 Lowest |
| 1.06 | Providing and fixing 4 Lever Mortice Lock of approved make suitable for aluminium sections | 10 | Each | 800 ₹8,000 Lowest |
| 1.07 | Providing and fixing approved quality and shape locks cum handle of approved make for sliding shutters | 25 | PAIR | 1,500 ₹37,500 Lowest |
| 1.08 | Providing and fixing approved quality stain less steel body roller wheels of approved make for sliding shutters | 10 | PAIR | 200 ₹2,000 Lowest |
| 1.09 | Filling the gap between aluminium frame & adjacent RCC / Brick work / Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Up to 5 mm depth and 5 mm width | 1,000 | M | 200 ₹2,00,000 Lowest |
Tender Value
₹2.0 Cr
EMD Value
₹4.7 L
Closing Date
19 Jan 2026, 3:00 pmClosed
Chief Engineer
Civil Engineering Division, BARC, Trombay, Mumbai.
Maintenance of Civil Carpentry,Plumbing, PH and miscellaneous works for Year 2025-2027 of Engineering Halls 9, 10,11 New Animal House,New Field House, Common Facility Building, Service Buildings and various other buildings at North Site,BARC, Trombay
2025_BARC_890410_1
BARC/CED/ET/71/2025-2026 Dated 15/12/2025
Open Tender
Civil Works
Item Rate
730 days
North Site, BARC, Trombay, Mumbai 400085
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹4.7 L
8 Jul 2026
23 Dec 2025
22 Jan 2026
23 Dec 2025
19 Jan 2026
24 Dec 2025
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1SECTION 1 - CARPENTRY WORKS | |||||
| 1.01 | Providing and Fixing Homogeneous 2.00 mm thick PVC sheet/tile in flooring and skirting of approved make in approved pattern on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer including, levelling small undulations with plaster of paris if required, rolling with light wooden roller weighing about 5kg all complete as directed by Engineer-in-charge in approved colour and shade | 250 | SqM | - | - |
| 1.02 | Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately)
a) Colored Anodised Aluminium sections (Minimum anodizing thickness of 15 micron) | 2,000 | Kg | - | - |
| 1.03 | Providing and fixing 12 mm thick pre-laminated particle board flat pressed 3 layer or graded wood particle board conforming to IS
12823 Grade-I, Type - II in panelling fixed in aluminium doors, windows, shutters and partition frames with C.P Brass / Stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge Prelaminated particle board with decorative lamination on both sides | 200 | SqM | - | - |
| 1.04 | Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)
a) With clear float glass panes of 6.00 mm thickness | 150 | SqM | - | - |
| 1.05 | Providing and fixing double action hydraulic floor spring of approved brand and manufacturer (conforming to relevant Indian Standard) for doors including cost of removing & re-fixing of existing door shutter, cutting floors as required, embedding in floors and cover plates with M.S pivot and single piece of M.S sheet outer box with slide plate etc. complete as per directions of Engineer-in-charge with brass/SS cover plate. | 10 | Nos | - | - |
| 1.06 | Providing and fixing 4 Lever Mortice Lock of approved make suitable for aluminium sections | 10 | Each | - | - |
| 1.07 | Providing and fixing approved quality and shape locks cum handle of approved make for sliding shutters | 25 | PAIR | - | - |
| 1.08 | Providing and fixing approved quality stain less steel body roller wheels of approved make for sliding shutters | 10 | PAIR | - | - |
| 1.09 | Filling the gap between aluminium frame & adjacent RCC / Brick work / Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Up to 5 mm depth and 5 mm width | 1,000 | M | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.50 MB
Tendernotice_2.pdf
PDF • 0.44 MB
ProformaofScheduleET71.pdf
Tender Documents • 0.27 MB
ScheduleAET71.pdf
Tender Documents • 0.22 MB
TechnicalbidET71.xls
Tender Documents • 0.07 MB
BOQ_935976.xls
BOQ • 0.34 MB
CorrigendumNo3.pdf
PDF • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .