PROVN OF GI SHEET VIEW CUTTER AND REPAIR OF BOUNDARY WALL AT OLD PALAM ROAD (VVIP RAOD) AF STN PALAM UNDER GE (AF) PALAM, DELHI CANTT-10

Amount

Dismantling fencing wire mesh (barbed wire/chain link fence), any type and size complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete.

Taking down cement plaster or cement lime plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including removing the debris from site to outside MoD land.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for including removing the debris from site to outside MoD land.

M & L for cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in anchorage blocks for hold fast, post and struts and similar work including excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft/ loose soil and removing surplus spoil to a distance not exceeding 50 m and making good surface all as specified and as directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces of walls in cement mortar 1:4 including finishing surface even and fair without using extra cement but using water proofing compound by weight as per manufacturer's instructions including necessary scaffolding complete all as specified and as directed. (Note : WPC will be paid and measuremed separately).

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size of any colour) with pigment of any colour in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Note : Payment for providing grooves shall be made separately).

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

M & L for precast solid bond stone in concrete 1:2:4 type B-1(using 20 mm graded stone aggregate), set in cement mortar 1:6 complete all as specified and directed.

S&F for mild steel work as in hand rails, half round or other steel section, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops for making any shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc conforming to Fe-290 Gde E-165 including treated embedded portion of posts and struts with tar or coal tar black paint complete.

S&F for mild steel work roof trusses (framed), trussed, purlins, crane gantries, rails and heavy bracket framing (Beam.tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe.290.Gde-E-165 all as specified.

S&F for mild steel work as in framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified.

M&L for preparation of newly steel and iron surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

S&F for galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured).

Suppy only integral water proofing compound all as specified and directed.

M&L for pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for mild steel work as in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

M& L for complete removal of existing surface of walls ,chajjas, soffits & beam etc including necessary scaffolding and finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade with two coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as per manufacturers instructions.

M& L for complete removal of existing surface of walls ,chajjas, soffits & beam etc including necessary scaffolding and applying two coats of cement base paint all as specified.

M& L for preparation of newly plastered surfaces of walls ,chajjas, soffits & beam etc including necessary scaffolding and finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade with two coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as per manufacturers instructions.

M& L for preparation of newly plastered surfaces of walls and and applying two coats of cement base paint all as specified.

M&L for precast cement concrete louvres and jallies, 40mm thick (measured solid) in cement concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregate) and set in cement mortar 1:4 including all mouldings but excluding frame including taking down of existing jallies complete

SHYAM ENTERPRISES

H.B. Traders

Shri Balaji Construction

L G BUILDERS

Shiv Shankar Nirman Co.

M/S Parshant Associates