MISC REPAIR TO PATH HARD STANDING PARKING SHED SPE AREA CIVIL ZONE OFFICERS MESS SNCOS MESS AND AIR MEN BILLETS AT CAMERO COMPLEX

Amount

M&L for demolition of Cement Concrete in ground floors & pavings n.exc. 15 cm thickness (below or above ground level) (unreinforced) complete all as specified and as directed by Engineer-in-Charge.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed by Engineer-in-Charge.

M&L 75 mm thick PCC type D-2, (1:4:8) using 40 mm graded stone aggregate as in sub base for floor finishes complete all as specified and as directed by Engineer-in-Charge.

M&L for sand filling under floor or in foundation including spreading & levelling in layers n.exc. 25 cm thick complete all as specified and as directed by Engineer-in-Charge.

S&F precast machine pressed PCC interlocking paver block of 80 mm thickness, M-40 grade of any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved complete all as specified and as directed by Engineer-in-Charge.

S&F precast machine pressed PCC interlocking paver block of 60 mm thickness, M-40 grade of any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved complete all as specified and as directed by Engineer-in-Charge.

M&L for Chequered cement concrete coloured tiles 20-25mm confirming to IS -1237 (rubber form moulded)any size in floorsetc, set, jointed & pointed with cement slurry 15mm thick bedding layer of cement sand mortar (1:6) ccomplete all as specified and as directed by Engineer-in-Charge.

M&L for machine cut kota stone slab flooring 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and 15mm thick screed bed or bedding layer of cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

All as per item No. 8 above but as in riser of steps skirting dado and pillar over 10 mm back coat in CM 1:3 complete all as specified and as directed by Engineer-in-Charge.

M&L for industrial scratch resistant and neutral to UV rays outdoor coloured tiles of size 300 x 300x10mm thic, suitable for vehicular traffic like parking lots driveways pathways, pavements etc confirming to IS -4457 2007 ( colour terracotta/ ivory/Grey) ( Shape- star/Chex/Coin/plain /capsule /stripe and dot) shape, size and pattern/colour as directed by engineer in charge, as set and jointed in neat cement slurry and pointed to coloured cement to match, over 15 mm thick screed bed of CM (1:6) over 40 mm thick over pcc 1:2:4 using 20 mm graded stone agregate complete all as specified and as directed by Engineer-in-Charge. Make : Johnson / Endura / Swastic / Somany / Durastone / Orient Bell

M&L for Polishing Kota stone / terrazo tile flooring etc complete all as specified and as directed by Engineer-in-Charge.

M&L for PCC 1:2:4 type B-1(20mm graded aggregate),40mm thick as in flooring complete all as specified and as directed by Engineer-in-Charge.

M&L for PCC 1:2:4 type B-0 (12.5mm graded aggregate),25mm thick as in sub base to the flooring complete all as specified and as directed by Engineer-in-Charge.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlarfacings, dressed stonework and precast concrete articles complete all as specified and as directed by Engineer-in-Charge.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 M mean radius built in CM 1:6 complete all as specified and as directed by Engineer-in-Charge.

M&L for brick work with sub class 'B' brick , half brick thick wall built in CM 1:4 straight or curved on plan to any radius with old size bricks complete all as specified and as directed by Engineer-in-Charge.

M & L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces including finishing surface even & smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge upto 4 storied building

M&L for preparing newly plastered or un plastered surface of walls and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge.

S&F in repair PVC (SWR) pipe single socketed in any length with rubber ring joint fixed to wall/trenches or floors of 110mm bore complete all as specified and as directed by Engineer-in-Charge.

S&F PVC (SWR) bend any radius of 110 mm dia complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs PVC (SWR) pipes 75 mm single socketed, in any length with solvent cement joints fixed to walls/laid in floors incl stack clamps of stainless steel with bolts & nuts etc including provn of antis phonic pipes complete all as specified and as directed by Engineer-in-Charge.

S&F PVC SWR bends 75 mm complete all as specified and as directed by Engineer-in-Charge.

M&L 150 mm dia reinforced concrete pipes class NP3 laid and jointed complete with collars including taking down old ones incl necessary earth work and retrunin filling and removal complete all as specified and as directed by Engineer-in-Charge.

All as per item No. 23 above but 200mm dia complete all as specified and as directed by Engineer-in-Charge.

All as per item No. 23 above but 300 mm dia complete all as specified and as directed by Engineer-in-Charge.

All as per item No. 23 above but 600mm dia complete all as specified and as directed by Engineer-in-Charge.

Dismantling roof sheets / wall cladding etc complete all as specified and as directed by Engineer-in-Charge.

Dismantling structural steel work etc complete all as specified and as directed by Engineer-in-Charge.

Supply fabrication and errection of structure on any shape (round, oval, or box type) for 3 mm thick aluminium composite panel claddin made of aluminium channel ( 25x50x1.6mm) with cleat angle ( 8x18x2mm) necessary hardware with material and material weather sealant to make joint leak proof and supply and fixing of 3 mm thick PVDF coating Aluminium composite panel complete in all respect of indo bond or equivalent make as per approval of GE spacing of channel should be as per manufacturerer instrucion complete all as specified and as directed by Engr -in- Charge

S&F Colour coated galvalume aluminum zinc coating GI based corrugated/ style pattern steel sheet 0.50mm thick paving tensile strength of 550 MPA fixed to steel frame using L or J bots with washer in roofs including making good joint frame and sheets complete all as specified and as directed by Engineer-in-Charge.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

S&F steel/work in tubular truses, purlins, rafters, struts, vertical members and similar work including special shape washers complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 grade St-240 complete all as specified and as directed by Engineer-in-Charge.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer incl preparation of steel surface old or new exc 10 cm width or girth complete all as specified and as directed by Engr- in- charge

All as per item No. 33 above but n.exc. 10 cm in width or girth complete all as specified and as directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge.

Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, drain Covering and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed by Engineer-in-Charge.

Dismantling cast iron work o any description etc complete all as specified and as directed by Engineer-in-Charge.

S&F Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles exc 5 kg each complete all as specified and as directed by Engineer-in-Charge.

All as per item No. 38 above above but articles n. exc 5 kg each complete all as specified and as directed by Engineer-in-Charge.

M&L for PCC tpe B1 1:2:4 using 20 mm graded stone aggregate as in coping complete all as specified and as directed by Engr -in -Charge

M&L precast cement concrete type B1 1:2:4 using 20 mm graded stone aggregate as in kerb stone slab set in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.

All as per item No. 41 above but except kerb stone complete all as specified and as directed by Engineer-in-Charge.

M&L for two coats of synthetic enamel paint over a coat of priming paint incl preparation of concrete surface old or new exc 10 cm width or girth complete all as specified and as directed by Engineer-in-Charge.

M&L 16 to 18 mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sq m area and not exceeding 0.5 sq m fixed with and including one number SS clamps (grade-202) of flat-30mm X 2mm , making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing &including silicon treatment incl rendering 15mm thick in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.

M&L for preparing newly plastered or un plastered surface of walls and applying two coats of cement base paint over a coat of priming coat of alkali resistant priming paint complete all as specified and as directed by Engineer-in-Charge.

Dismantling floor earth or wall tiling incl cement mortar bedding but not backing removing serviceable tile to store and rubbish of the primisses complete all as specified and as directed by Engineer-in-Charge.

M&L for coloured glazed ceramic tiles in vertical surface of size 450 X 300mm of 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 15mm thick in cm 1:4 complete all as specified and as directed by Engr-in-Charge

S&F 2mm thick fiber glass reinforced transulated corruggted/palin sheeting with two corruagation side lap fixed with coath screw and washer in roof, wall etc complete all as specified and as directed by Engineer-in-Charge.

M/S LADPURIA ENTERPRISES

Hindustan Co.Co

M/S MG GROUP

JAIPAL and BROS

High Tech Metal India

J D ENTERPRISES

Ashish Sehgal and Co.

M/s. Kansal Construction Co.

shiv shanker enterprises

Rishi Constructions

Mahesh Enterprises

R C Sharma and Co

m/s deepak builders