Loading…
Loading…
Tender Value
₹16.0 L
EMD Value
₹32,000
Closing Date
22 Sept 2026, 11:00 am
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
SETTLEMENT
48 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
GENERAL INSTRUCTIONS TO TENDERERS For e-Tenders
E-tender have been invited for and on behalf of the President of India through website www.ireps.gov.in for the work mentioned against t h e tender notice number available in the website. Tenderers are required to bid online only in the above mentioned website. All Mandatory fields marked have to be filled in by the tenderer. No manual offer is acceptable against this tender. No Tender document i n hard c o p y w i l l b e sold against this tender. Please read the Instructions to Tenderers for e-tendering, Indian Railways Standard General Conditions of Contract- April- 2022 (GCC-April-2022) and Special Condition of Contract before filling the e-tender through online.
E-Tender forms are not transferable and the same is to be submitted with digital signature by the Tenderer already registered with the site.
The submitted e-tender forms w ill b e considered a s digitally signed by the tenderer as a confirmation from the tenderer that the tenderer has read, agreed and accepted all the conditions and attached documents referred in para 1.2 above as well as Schedule of Tender, Indian Railways Standard General Conditions of Contract- April- 2022 (GCC-April-2022) and Special Conditions of Contract.
The tender offer complete in all respect and with all documents i s t o be submitted online by e-tendering process through the website www.ireps.gov.in before t h e closing time/date o f this t e n d e r a s mentioned i n t h e N I T (Notice Inviting Tender). Tenderer can revise the bids any number of times till the closing time/date of the tender. No manual offers shall be accepted.
The Railway may, of its own o r i n response to any clarification requested/ suggested by any person including that from the tenderer, may modify this tender document at its sole discretion at least 15 days before the due date of closing of the tender as corrigendum.
Corrigendum as required may be issued at least 15 days prior to the closing of the tender. The Corrigendum of this tender, if any, as issued time to time will be available on website at least 15 days in advance of closing of tender. The tenderers are requested to check the website before submitting their offer whether any such corrigendum to the tender has been issued or not and revise the offer if required accordingly. Failure on the part of tenderer on this aspect will be solely tenderers responsibility.
This document is the Standard Tender Document which consists of the General Instruction t o Tenderers, NIT (Notice Inviting Tender), Indian Railways Standard G e n e r a l Conditions of Contract- April- 2022 (GCC-April-2022), Special Conditions of Contract, Tender Schedules, Specifications of the works & various Annexures etc. All the above-mentioned documents taken together if not scored off, shall constitute the complete tender document here after referred to as "Tender Document" & have to be read together & acted upon accordingly. No part of the tender document can be relied upon or acted upon in isolation.
T h e Railway a n d t h e website w i l l h a v e n o responsibility for incorrect evaluation of cost and thereby incorrect cost of work and ranking of tenderers, if the schedule i s not filled correctly and unambiguously for each item. No claim or clarification o f a tenderer regarding applicability, inclusion or exclusion o f any element o f t a x o r d u t y o r a n y o t h e r change i n t h e offer subsequently (after opening o f the tender) will b e entertained. F o r this the tenderers are advised to read the Instructions, Indian Railways Standard General Conditions of Contract- April- 2022 (GCC-April-2022), Special Conditions of Contract and other Instructions carefully before submission of tender.
In case of any problem with the portal is faced while filling the e- tender, Tenderers are advised to contact with the Helpdesk of IREPS portal who will render all help and assistance related with the website and portal except that related with the details of the tender. Railway will not take any responsibility for nonparticipation in the e-tender online for the reasons related to the website and portal or server etc beyond the control of railways.
Railway and the IREPS website will not take the responsibility for any online payment made by the tenderer and debited from his/their account towards the Bid Security due to wrong or mismanipulation or any reasons related with the IT o r found unsuitable for the tender etc. In this regard Railway and IREPS website will not entertain any claim or refund the paid amount. E- Tender Forms shall be issued free of cost to all tenderers.
All documents uploaded or information furnished in the website are digitally signed by the competent authority.
INCONSISTENCY BETWEEN THE DOCUMENTS
The Indian Railways Standard General Conditions of Contract- April- 2022 (GCC-April-2022), Standard Schedule of Rate SSOR), CPWD Specifications 2019 Vol I & II and the USSOR [Unified Standard Schedule of Rates (Labour & Materials) & Indian Railway Unified Standard Specification- 2010 shall be read with all correction slips issued thereto from time to time and shall form integral part of this tender document. In case of any difference, contradiction, discrepancy, with regard to Conditions o f tender/ contract, Specifications, Drawings, Bill of quantities etc., forming part of the tender/ contract, the following shall be the order o f precedence: (i) Letter of Award/Acceptance (LOA) (ii) Bill(s) of Quantities (iii) Special Conditions of Contract (iv) Technical Specifications as given in tender documents (v) Drawings (vi) Indian Railways Standard General Conditions of Contract updated with correction slips issued up to date of inviting tender or as otherwise specified in the tender documents. (vii) Indian Railways Unified Standard Specification (IRUSS-2021) updated with correction slips issued up to date of inviting tender or as otherwise specified in the tender documents, if applicable in the contract. (viii) CPWD Specifications 2021 Vol I & II updated with correction slips issued up to date of inviting tender or as otherwise specified in the tender documents, if applicable in the contract. (ix) Indian Railways Unified Standard Specifications (Works and Material) 2010 updated with correction slips issued up to date of inviting tender or as otherwise specified in the tender documents, if applicable in the contract. (x) IR Specifications/Guidelines updated with correction slips issued up to date of inviting tender or as otherwise specified in the tender documents. (xi) Relevant B.I.S. Codes updated with correction slips issued up to date of inviting tender or as otherwise specified in the tender documents.
TENDERER S POSTAL ADDRESS
Address of tenderer: The address, email Id and Mobile phone, other phone nos. and other details given in the portal while registering will be considered as official address a n d all correspondences t o t h e tenderer will be m a d e in these registered m o d e s . All communication sent i n t i m e t o the tenderer by post at the said address shall be deemed to have reached within in 7 day of Dispatch the tenderer duly and in time. Important documents shall be sent by Registered Post. However, an undertaking h a s t o b e g i v e n i n t h e enclosed annexure by uploading a scanned copy of duly filled in form in the portal.
THE SCHEDULE OF WORKS
The Schedules of Works is also available seperately in the website online and Rates are to be quoted online and submitted online duly signed digitally.
INSPECTION OF DATA
Drawings f o r t h e work c a n b e seen i n t h e offi c e inviting this tender on any working day during working hours. The drawings are only for the guidance of tenderers. Detailed working drawings, if required based o n the drawings mentioned above, will be given by the Engineer or his representative from time to time.
OPENING OF TENDER
Opening of e-tender online:- The e-tenders will be opened online using the IREPS portal. No representative is required to be present for opening of tender and taking notes of rates quoted and ranking as the complete details of rates etc. of all the bidders shall be available to the bidders in the website after the opening of the tender. In case of two packet system, technical bids will be opened first and financial bid will be opened in a subsequent date and time to b e notified/intimated t o those bidder whose technical bids are found acceptable. The tenderer must submit the documents in support of technical bids against eligibility criteria as mentioned in special technical criteria at para 4 and filled the financial bid on schedule.
In case the date of closing mentioned in the Notice Inviting Tender is declared a holiday/bandh/strike etc. on any account, the date of closing tender online will not be changed as the application in the website of IREPS does not permit submission of any offer after closing date and time of the tender. However, opening of tenders online will be on any convenient day after the closing date/time of tenders.
SUBMISSION OF DOCUMENTS IN SUPPORT OF ELIGILIITY CRITERIA
All documents in support of fulfillment of the eligibility criteria with respect to completion of similar nature of work for Technical Eligibility Criteria and minimum average annual contractual turnover for Financial Eligibility Criteria must be uploaded over the website www.ireps.gov.in with scanned copy in .Pdf format at the time of tender bidding with details in specified format (Annexure W & Y).
T h e tenderer shall submit along w i t h t h e tender document, documents in support of his / their claim t o fulfill the eligibility criteria as mentioned in the tender document. Each page of the copy of documents/certificates in support of credentials, submitted by the tenderer, shall be self- attested / digitally signed by the tenderer or authorized representative of the tendering firm. Self - attestation shall include signature, stamp and date ( on each page).
T h e R ailw a y reserves t h e r i g h t t o v e r i f y a l l statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when s o required b y the Railway, m a k e available a l l s u c h information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the railway shall not relieve the bidder of its obligations or liabilities here under nor will it affect any rights of the railway there under.
In case of any wrong information submitted by tenderer, the contract shall be terminated. Bid Security, Performance Guarantee (PG) and Security Deposit (SD) of contract shall be forfeited and agency shall be debarred for doing business on entire Indian Railways for 2 (two) years.
Tenderer are advised to take utmost care while scanning/uploading the documents related to their eligibility. Railway administration will not be responsible for improperly scanned/uploaded document, corrupt file, illegible documents etc.
The tenderer should ensure that the information/documents, being submitted in support of claim of qualifying the laid down eligibility criteria, are prepared in prescribed formats duly signed by an official authorized t o d o so. Documents issuing authority must furnish a l l relevant information i n the prescribed format itself. Complete details of issuing authority should also be indicated in the document. Furnishing incomplete, illegible, vague information may lead to rejection of offer.
SUBMISSION OF COST OF TENDER FORM:
E-Tender Forms shall be issued free of cost to all tenderers.
SUBMISSION OF Bid Security: The Bid Security shall be deposited either in cash through e-payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India. The Bank Guarantee bond shall be as per Annexure-H and shall be valid for a period of 90 days beyond the bid validity period.
Tender must be accompanied with Bid Security of requisite amount as mentioned in NIT in A/c of P.F.A. S.E.C.Railway, Bilaspur deposited through Internet Banking or payment gateway only. i Any firm recognized by Department of Industrial Policy and Promotion (DIPP) as 'Startups' shall be exempted from payment of Bid Security deposit detailed above. ii Labour Cooperative Societies shall deposit only 50% of above Bid Security deposit detailed above.
In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured: i. A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. ii. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids (Le. Excluding the last date of submission of bids). iii. Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. iv. The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender. v. The details of the BG, physically submitted should match with the details available in the scanned copy and the data entered during bid submission time, failing which the bid will be rejected vi. The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the ***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right hand top corner of the envelope. vii. The envelope shall be addressed to the officer and address as mentioned in the tender document. viii. If the envelope is not sealed and marked as instructed above, the Railway assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder.
SOUTH EAST CENTRAL RAILWAY TENDER FORMS (FIRST SHEET) ANNEXURE-I
I/We have read the various conditions to tender attached hereto and agree to abide by the said conditions. I/We also agree to keep this offer open for acceptance for a period of Sixty days (in case of two packet system of tendering 90 days) from the date fixed for closing of the tender and in default thereof, I/we will be liable for forfeiture of my/our "Bid Security". I/We offer to do the work for South East Central Railway, at the rates quoted in the attached bill(s) of quantities and hereby bind myself/ourselves to complete the work in all respects within as mentioned in NIT of this instant tender (months) from the date of issue of letter of acceptance of the tender.
I/We also hereby agree t o abide b y the Indian Railways Indian Railways Standard General Conditions of Contract- April- 2022 (GCC-April-2022) with all correction slips up-to-date and to carry out the work according to the Special Conditions of Contract and Specifications of materials and works as laid down by Railway in the annexed Special Conditions/Specifications, Schedule of R a t e s w i t h all correction slips up-to-date for the present contract.
A Bid Security of Rs. (as mentioned in NIT of this instant tender) has already been deposited online/ submitted as Bank Guarantee bond. Fu l l value o f t h e Bid Security shall stand forfeited without prejudice to any other right or remedies in case my/our tender is accepted and if: -
I/We do not submit the Performance Guarantee within the time specified in the Tender document;
I/We do not execute the contract documents within seven days 10.3.2 after receipt of notice issued by the Railway that such documents are ready, and
I/We do not commence the work within fifteen days after receipt of orders to that effect.
( a ) I/We am/are a Start up firm registered by........................ Department of Industrial Policy a n d Promotion (DIPP) a n d my registration number is................ valid upto...................... (Copy enclosed) and hence exempted from submission of Bid Security.
We are a Labour Cooperative Society and our Registration No. is .................... with .......................and hence required to deposit only 50% of Bid Security.
Until a formal agreement is prepared and executed, acceptance of this tender shall constitute a binding contract between us subject to modifications, as maybe mutually agreed to between us and indicated in the letter of acceptance of my/our offer for this work.
TENDER FORM (SECOND SHEET) ANNEXURE-I
Instructions to tenderers and conditions of tender: -The following documents form part of Tender/Contract:
Augmentation of general illumination by providing portal mounted lights, under gear examination lights & welding facilities at BCN examination yard under the jurisdiction Sr.DEN/settlement/BSP.
DRM-ENGG-BSP-T-164-26-27~SECR
DRM-ENGG-BSP-T-164-26-27
Open
Works - General
4 Months
Bilaspur, Chhattisgarh
₹0
₹32,000
25 Aug 2026
25 Aug 2026
8 Sept 2026
35 items across 1 schedule · ₹18,46,035.05 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 100 | 205.45 | 20,545 |
| 2 | All kinds of soil. | cum | 30 | 286.85 | 8,605.5 |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | cum | 20 | 253.95 | 5,079 |
| 4 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | cum | 20 | 368.65 | 7,373 |
| 5 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 15 | 2,161.2 | 32,418 |
| 6 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 20 | 7,365.15 | 1,47,303 |
| 7 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 20 | 6,670.25 | 1,33,405 |
| 8 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 9 | 8,364.2 | 75,277.8 |
| 9 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 8 | 10,185.05 | 81,480.4 |
| 10 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 45 | 307.95 | 13,857.75 |
| 11 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. | Sqm | 40 | 669.55 | 26,782 |
| 12 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 20 | 766.55 | 15,331 |
| 13 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | Sqm | 35 | 608.35 | 21,292.25 |
| 14 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 30 | 804.25 | 24,127.5 |
| 15 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 1000 | 89.65 | 89,650 |
| 16 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 1300 | 89.65 | 1,16,545 |
| 17 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 20 | 8,683.8 | 1,73,676 |
| 18 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 10 | 6,658.25 | 66,582.5 |
| 19 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 15 | 8,190.9 | 1,22,863.5 |
| 20 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 450 | 111.95 | 50,377.5 |
| 21 | Hot finished welded type tubes | Kg | 700 | 154.9 | 1,08,430 |
| 22 | In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete | Kg | 200 | 102.25 | 20,450 |
| 23 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 175 | 142.3 | 24,902.5 |
| 24 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 50 | 671.55 | 33,577.5 |
| 25 | Ridges plain (500 - 600mm) | Metre | 24 | 450.6 | 10,814.4 |
| 26 | 1:6 (1 cement: 6 fine sand) | Sqm | 100 | 282 | 28,200 |
| 27 | 1:6 (1 cement: 6 fine sand) | Sqm | 100 | 324.3 | 32,430 |
| 28 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture | Sqm | 200 | 191.4 | 38,280 |
| 29 | Two or more coats on new work | Sqm | 350 | 121.45 | 42,507.5 |
| 30 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 20 | 2,928.1 | 58,562 |
| 31 | In cement mortar | cum | 15 | 1,698.45 | 25,476.75 |
| 32 | G.S. Sheet | Sqm | 50 | 136 | 6,800 |
| 33 | Asbestos Cement sheet | Sqm | 50 | 63.75 | 3,187.5 |
| 34 | 300 mm dia piles | Metre | 60 | 2,560.9 | 1,53,654 |
| 35 | 300 mm dia piles | Each | 12 | 2,182.6 | 26,191.2 |
| Schedule total | ₹18,46,035.05 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
BGFORMATBeneficiarySFMS.pdf Annexure L
ATTACHMENT
Annexure-AEngg.Org..pdf
ATTACHMENT
Annexure-BPlantMachinery.pdf
ATTACHMENT
Annexure-EEFTdetail.pdf
ATTACHMENT
Annexure-G.pdf
ATTACHMENT
AnnexureHBidsecurityformat.pdf Annexure H
ATTACHMENT
Annexure-I.pdf
ATTACHMENT
AnnexureM.pdf
ATTACHMENT
AnnexureHBidsecurityformat.pdf
ATTACHMENT
AnnexureJ.pdf
ATTACHMENT
BGFORMATBeneficiarySFMS.pdf
ATTACHMENT
Annexure-CNewWorkinHand.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .