PROVN OF CHAIN LINK FENCING AT GORKHA ENCLAVE (K LINE) AND MT GATE AT 58 GRC AND CERTAIN LBW AND REV WORKS AT HAPPY VALLEY UNDER GE SHILLONG

Amount

S&F mild steel Framed work as in grills/guard bars etc with ends of bar shouldered/inserted in to wooden frames complete all as specified and directed by Engineer-in-Charge.

M&L for Synthetic enamel paint two coats over a coat of red oxide primer on new or previously untreated steel surfaces exc.10 Cm width or girth including necessary preparation of steel surfaces etc complete all as specified and directed by Engineer-in-Charge.

Taking down Chowkhats or frames n.exc 1.5 Sqm each but with shutters (without taking off shutters from the frame) including builders hardware each complete all as specified and directed.

Taking down shutters of any description n. exc. 1 Sqm each and removing from site complete all as specified and directed.

M&L for 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as specified and directed by Engineer-in-Charge.

S&F 30 mm thick, 2nd class hard wood, glazed and skeleton shutter, open rebated and prepared to receive glass or gauge without sash bars , divided in to squares and edges of framing plain chamfered or rounded, fitted with cut or mitred beads for securing glass or gauge etc as specified in SSR Part-I section 8 clause 8.24 (a) complete all as specified and directed.

S&F Mild Steel Butt hinges, medium weight, cold rolled, 75mm size ISI Marked complete all as specified and directed.

S&F mild steel pressed handles oval type stove enamelled black of 100mm length etc complete all as specified and as directed.

S&F mild steel barrel tower bolt stove enamelled black with bright bolt of size 150 mm length complete all as specified and as directed.

S&F 4mm thick sheet glass ordinary quality & glazing with oil putty or fitted with wooden beads in squares n.exc. 0.50 sqm in each pane complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed

Forming jambs, etc. to openings (to foregoing item)in CM 1:6, including cutting,toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and directed by Engineer-in-Charge.

M&L for Synthetic enamel paint two coats over a coat of pink primer on new or previously untreated wooden surfaces over 10 Cm width or girth including necessary preparation of wooden surfaces complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and removing surplus soil to a distance n.exc. 50 m from the starting point etc complete all as specified and directed by Engineer-in-Charge.

S&F mild steel works such as Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and as directed.

M&L for PCC (1:3:6) type B1 using 20 mm graded stone aggregate as in fixing of RCC/PCC/Steel post or similar type of works etc complete all as specified and as directed by Engineer-in-Charge.

Supply only Chain link MS galvanised fencing, any size or type etc complete all asspecified and directed by Engineer-in-Charge. .Note:- The unit weight of chain link shall not be less than 4 kg per sqm.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of new GI binding wire etc complete all as specified and directed by Engineer-in-Charge.

S&F mild steel flat iron / angle iron fixed to posts to hold chain link fencing and similar small articles conforming to Fe-290 Gde-E-165 etc complete all as specified and as directed.

S&F Mild steel 10 to 12 mm dia screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 15 cm long but n.exc. 22.5 cm long etc complete all as specified and as directed.

M&L for mild steel round bar upto & including 10 mm dia cut to length bent to shape required including bending, hookings as in chain link fencing fixed with bent to shape required including bending, hookings as in chain link fencing fixed with nut &bolt or securing with clips quality conforming to Fe-410-S etc complete all as specified and as directed.

S&FGalvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

M&L Point wiring with two single core 2.5 sqmm PVC insulated FRLSH grade, 1100V grade cable with multistranded copper conductor of size 2.5 Sqmm (Nominal area) (ISI Marked) drawn in and including PVC Casing capping of suitable size with all fittings and accessories including PVC rectangular board of suitable size and drawing continuous earth wire of PVC insulated FRLSH grade, unsheathed stranded copper conductor of size 2.5 Sqmm (ISI Marked) as continuous earth wire connected to common earth dolly for one 16 AMps socket point controlled by one 16 AMps switch complete all as specified and as directed.

S&Fsheet metal plug and socket, SPN complete inclusive 20 Amps SPN MCB, AC 230 Volt, 6-32 Amps complete inclusive all incoming and out going electric connection and testing complete all as specified and directed.

Supply and fix and testing of storage type , electrically driven ,ISI Marked, water heater (Geyser) of capacity 25 litres, vertical type, wall mounted, BEE 5 star rating , AC, single phase including necessary fixing arrangements , electric and water connection complete all as specified and as directed. Make:- Havells Cat part no. GHWASEIB025 or Usha Cat Part No-QUADO 25 Ltr or equivalent make in Racold / Bajaj/LG .

S&F CP Bib tap 15 mm bore, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed. . Make:- Make:- Prayag Cat part No.7606 or equivalent model from make:Cera/Jaguar/ Parryware

S&F CP Stop cock ,15 mm bore, fancy type, chromium plated, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed. . Make:- Make:- Prayag Cat part No.8010 or equivalent model from make Cera/Jaguar/Parryware

Supply and laying GI tubing medium grade,20mm bore with all GI fittings, fixed complete to walls and ceiling or laid in floor for cable crossing complete all as specified and as directed

Supply and laying GI tubing medium grade,25mm bore with all GI fittings, fixed complete to walls and ceiling or laid in floor for cable crossing complete all as specified and as directed

Supply and laying GI tubing medium grade,40mm bore with all GI fittings, fixed complete to walls and ceiling or laid in floor for cable crossing complete all as specified and as directed

Supply and laying GI tubing medium grade,15mm bore with all GI fittings, fixed complete to walls and ceiling or laid in floor for cable crossing complete all as specified and as directed

S&F in repair Gun-metal, globe or gate valves,20 mm bore (ISI marked) with iron wheel head, screwed both ends for iron pipe and fixed etc complete all as specified and as directed.

Supply and fix Switch socket combination (ISI marked), 5 in 1 and 5/16 Amps, flush type, 240 volts complete all as specified and as directed.

Supply & fix self rotating wind driven aluminium body 24 inch turbine ventilator fans in roof sheets complete all as specified & directed by Engr-in-Charge.

Supply & fix 0.71mm thick plain, Aluminium sheeting , Alloy 31000 H4 in Ducts, ridges, hips, valley gutter, drip and straight flashing complete all as specified & directed by Engr-in-Charge.

Dismantling of plain or corrugated steel sheeting any guage thickness including Nainital or similar pattern roof covering complete all as specified and directed.

Fixing only Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws And washers, in roof, walls etc complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed by Engineer-in-Charge.

S K Construction

M/S UTTAM SAHA