REPAIR /MAINT OF FLOORING, WALL, ROOF SHEETS, CEILING, PLUMBING AND CERTAIN MISC WORKS IN MD/OTM ACCN AT MIL STN KALKA UNDER GE JUTOGH

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description in any position not otherwise provided for complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 290 Gde E-165.

M&L for mild steel hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 as specified and directed.

M & L for preparation of new or previously untreated steel surfaces of any descirption not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 9-10mm thick (square/rectangular) 600 x 600mm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:6 including roughing of old pcc/terrazo floor surfaces by any means preparatory to receive floor finishes complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 9-10mm thick (square/rectangular) 600 x 600mm as in skirting/dado and riser to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick backing coat with cement mortar 1:4 complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cemeent to match laid over and including 15mm thick screed bed with cement mortar 1:6 complete all as specified and directed.

M&L for Glazed ceramic colored tiles on verticle surface such as skirting/dado etc. 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 10mm thick plastering in CM 1:4 complete all as specified and directed.

M&L for Kota stone slabs, 20-25mm thick, machine cut as in skirting, set and jointed in cement slurry over & including rendering coat of 20 mm thick in cement mortar (1:6) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and polishing complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15cm thick (below or above ground level) and removing rubbish off the premises to a distance n exc 50 m & deposited where directed at a level in exc 1.5m above the starting point complete all as specified.

M &L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in plinth protection finished even & smooth without using extra cement complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed.

M & L for brick work with sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

Dismantling water tanks of capacity exc 500 & n.exc 1000 ltrs and removing from site complete all as specified and directed.

S&F Rotational moulded polythelene water storage tanks of 1000 ltr capacity (cylindrical vertical with closed top) three layer hoisted and fixed in position complete all as specified and directed in SSR Part-I

Taking down chowkats or frames with shutter exc 1.5 sqm but n.exc 4.0 sqm (without taking off shutters from frames) and removing from site including making good the distrurbed surfaces complete all as specified and directed.

Taking down chowkats or frames with shutter not exc 1.5 sqm (without taking off shutters from frames) and removing from site site including making good the distrurbed surfaces complete all as specified and directed.

S & F pressed steel frames for door with one or more rebates incl necessary fixing lugs hinges lock strike plate etc of size 125 x 60mm including filling with PCC 1:3:6 type C-0 including making good the distrurbed surfaces complete all as specified and directed.

S & F pressed steel frames for door with one or more rebates incl necessary fixing lugs hinges lock strike plate etc of size 105 x 60mm including filling with PCC 1:3:6 type C-0 including making good the distrurbed surfaces complete all as specified and directed.

S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing in SSR Pt-II.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each and refixing in the same opening after necessary repair etc complete all as specified and directed.

S & F 35mm thick factory made plain framed panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm venerred particle board with commercial veneering on both faces. The size of rail and style as per IS- 1003 (part -I) kiln seasoned and chemically pressure treated of 2nd class hard wood rails and style for doors incl one shop coat of pink primer complete all as specified and directed.

S&F 35mm thick glazed and skeleton shutter open rebated and prepared to receive glass gauge etc (with sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) of IInd class hard wood complete all as specified and directed.

S&F poweder coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F poweder coated (minimum thickness of powder coating 50 micron) Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc.complete all as specified and directed.

S&F poweder coated (minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws complete all as specified and directed.

S&F 100 mm long medium weight stainless steel but hinges complete all as specified.

S&F 150 mm long stainless steel handle complete all as specified.

S&F 200mm long stainless steel barrel tower bolts complete all as specified.

S&F 250 mm long stainless steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, stainnless steel and fixing bolt and sliding bolt complete all as specified.

M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in bed block for hold fast incl necessary form work complete all as specified and directed.

S&F steel windows of profile rectangular tube section with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows of profile rectangular tube section with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with out glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

S&F 3 mm thick figured glass, pin headed type and fixed with wooden beads in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.

S& F in repair galvanised mild steel wire cloth 0.56mm nominal dia or wire and average width or aperture 1.18mm and fixed with stainless steel wire staple complete all as specified and directed.

M & L for preparation of new or previosuly untreated wooden surfaces of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking up or down 15mm bore steel water tubing and connections incl cleaning for refixing or removal from site complete all as specified and directed.

S & F 15mm bore galvanised steel water tubes medium grade with all fittings and fixed to walls and ceilings or laid in floor complete all as specified and directed.

Re-fixing old steel tubing 15 mm dia and connections in new or old positions, with new fittings complete all as specified and directed.

Taking up or down 20mm bore steel water tubing and connections incl cleaning for refixing or removal from site complete all as specified and directed.

S & F 20mm bore galvanised steel water tubes medium grade with all fittings and fixed to walls and ceilings or laid in floor complete all as specified and directed.

Re-fixing old steel tubing 20mm dia and connections in new or old positions, with new fittings complete all as specified and directed.

S&F in repairs, vitreous china wash hand basin, white, flat back size 550 x 400mm including CP brass waste coupling, 600 mm long 32mm bore HDPE waste down pipe including CI brackets complete all as specified and directed.

S&F in repair 15mm dia brass CP basin mixer with Hot or cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair 15mm dia chromium plated pillar tap, cast copper alloy with capstain head, screwed down high pressure with long screwed shank and fly nut complete all as specified and directed.

S & F in repair stop valve of 15mm bore cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure with crtuch or butterfly handle capstan head screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repair stop valve of 15mm bore cast copper alloy fancy type chromium plated screwed down high pressure with crtuch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repair 15mm bore bib tap fancy type cast copper alloy with crutch or butterfly handle screwed down secrewed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair 15mm bore brass chrominum plated shower rose 100mm size with or without swivel joint incl fixing to steel pipe of size complete all as specified and directed.

S & F in repair viteous china squating pan " ORISSA PATTERN" of size 580mm x 440mm white with integral foot rest or back inlet and making good the floor complete in PCC 1:2:4 type B-1complete all as specified and directed.

S & F in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float, flush pipe and handle including brackets complete all as specified and directed.

S & F in repair PVC connection 15mm size with PTMTnuts of length 450mm complete all as specified and directed.

S & F in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/ plastic cleats (minimum weight 300 gms) complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail, 20mm dia D type 60 CM long between flanges complete all as specified and directed.

S&F in repair Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms) complete all as specified and directed.

S&F in repair 18/19mm Pre-laminated partical board, exterior grade Prelaminated both side with decorative choice lamination,fixed with screws to timber frame complete all as specified and directed.

S&F teak wood lipping, 6mm thick, over 18/19mm thick board fixed with nails complete all as specified and directed.

S&F 100mm hasp and staple, safety type of aluminium anodised including bolt to hinge plate, fixed with screws complete all as specified and directed.

S&F Continuous (piano) hinges 30mm width of flap, mild steel, bright finish or electrogalvanised complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed.

R. P. Suppliers and Construction Co.

m/s jupiter builders