KMC/LTGV/117/25-26/APAS22A/HM

Supply of 12.0 / 12.50 meter High mast lighting system with its accessories. Mast shaft shall be in two sections with steel material confirming to BSEN 10025 and material shall be high tensile steel, grade S355, hot dip galvanised confirming to BSEN ISO 1461 and suitable for wind velocity as per IS 875. It shall also include accessories for high mast including head frame, 2 continues steel wire rope 6 mm dia (7/19 construction), trailing cable, double drum winch, Galvanised Lantern carriage arrangement suitable for up to 9 luminaires symmetrically & its control gear( Make of Gear Box : New Allen Berry works / Chandra Gear / Elecon Engineering / Shanti Engineering) boxes and lightning finial. The mast shall have an integral power tool installed inside the base compartment for its operation along with Supply & Fixing of Cu Cable of Power Tool motor, Wiring for Luminaries, Anchor Plate, Foundation Bolt, Nut, Washer, and common Template all complete. Luminaire wiring materials not included in this item. (Make: Bajaj / Transrail / Valmond/Utkarsh /Skipper)

Erection of high Mast (12.0 / 12.50 M) on RCC foundation with cement concrete considering actual SBC of soil, with the help of suitable modern engg. tools and Plants, wiring of luminaries with all wiring materials like PVC insulated flexible cable of suitable copper conductor core of 1.5 mm... lugs, up to 10 nos. 6A MCB along with construction of shallow foundation with cement concrete for high Mast considering the safe soil bearing capacity as per site condition, as per drawing and design of manufacturer of the mast. The soil test and submission of its report is within the scope of the work.

Erection, testing & commissioning of up to 12.0 / 12.5 / 16.0 meter high mast on the existing civil foundation by bolts with suitable tools, tackles, machines etc, all complete, as per direction of the EIC.

Supplying & Erection of medium size feeder pillar box of Size (1200 x 750 x 450 mm) made up of 2 mm thick MS Plate along with suitable M.S. Angle. The P.B. have double hinge door at the front & back with suitable locking arrangement. The box will be painted by 2 cores of aluminiam paint over 1 coat of red oxide paint. Suitable arrangement should be provided for fixing of Timer unit, fuse unit & other accessories. Leg of the pillar box will be 900 mm in length by made up of (35 x 35 x 3 mm MS Angle with suitable base Plate. Legs of the Pillar box will be erected at 300 mm below the ground level with cement concrete (6:3:1). Rest portion coverd by 5" Brick Wall with plastering & net cement & bottom portion filled with silver sand as drawing & direction of E.I.C

Supplying of 1.1 KV. Grade PVC insulated Conductor of following cables (make: Polycab/ Gloster/Havells/):Size in Sq. mm, No & dia. of wire in mm , No of Core - 16 7/1.70 4

Supplying of 1.1 KV. Grade PVC insulated Conductor of following cables (make: Polycab/ Gloster/Havells/):Size in Sq. mm, No & dia. of wire in mm , No of Core - 25 7/2.24 4

Laying through Underground Trech.(a)Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

SCHEDULE OF RATES FOR EARTHING INSTALLATIONS.Earthing Installation by GI pipe ... (FOR Sub(station Neutral/Equipment earthing)Earthing with 80 mm dia GI pipe (TATA(Medium)x 3.0 Mts. long and 1 x 19/8 stranded GI (HOT Dip) wire (4 Mts. long), 25 mm dia x 150 mm long galvanized bolt, double nuts, double washers including socketing at both ends of stranded GI (h)ot Dip) wire by crimping sockets/ thimbles and S & F 40 mm dia GI pipe (ISI Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts

Supplying and fixing Sheet steel Main Switches on angle iron frame on wall 415V TPN with fuse on L&N 60/63 A Havells

Fixing only Floodlight Fitting with suitable tie clamps and MS plate FOR mounting on Pole/Tower or similar structure.

SUPPLY OF 200 WATT LED FLOOD LIGHT FITTINGS (KMC STORE PURCHASE RATE)

A N N E X U R E - I Basic Rate of Materials: (All Rates of materials from K-1 to K-14 are excluding VAT) 126.65mm GI pipe (ISI-Medium)

Compression Glands.Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring FOR dust & moisture(proof entry of XLPE/PVC armoured cables as below : FOR 3 core(vi)upto 35 sqmm

Erection of Earth Wire, Safety Devices, Cradle guard, Lightning arrestors, Fuses etc.6. Supplying & Fixing ...Horn Gap... type lightning arrestor complete with 100x63 mm porcelain pin insulator & brass metal part heavy type) incl. making connection to OH line and

Finishing cable ends.(b)Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.4 core 25 sqmm cable

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection Legrand FP 80A

S/F including fabrication, welding, fixing G.I. junction 6 arm projected bkt. with 2 nos. thro' bolts & nuts of 7"long and 5/8" dia including M.S.pole cap at the top of the junction with set screw etc. as reqd. and as per direction of Engineer-In-Charge for arm 2.1 M long (G.I.. Pipe) (ISI medium).

A N N E X U R E - I Basic Rate of Materials: (All Rates of materials from K-1 to K-14 are excluding VAT) 124. 40mm GI pipe (ISI-Medium)

Sub Total