REPAIR/REPLACEMENT OF WOODEN FURNITURE AT AF STN CHANDIGARH

Amount

TABLE 900MM X 600MM WITH/ WITHOUT DRAWER (DRG NO FD-223 & 224) Removing the following broken/ unserviceable parts from table with/ without drawer and supply and fixing new part made out of 1st class hard wood teak complete all as specified , shown on drawings and directed:-

Top side long rail

Top side short rail

Stiffener

Drawer

TABLE CENTRE (DRG NO FD-274) Removing the following broken/ unserviceable parts from table centre and supply and fixing new part made out of 1st class hard wood teak complete all as specified , shown on drawings and directed:-

Top side long rail

Top side short rail

Stiffener

TABLE DINING 6/8 PERSONS (DRG NO FD-273) Removing the following broken/ unserviceable parts from table dining 6/ 8 persons and supply and fixing new part made out of 1st class hard wood teak complete all as specified , shown on drawings and directed:-

Top side long rail

Top side short rail

TEAPOY (WOODEN) (DRG NO FD-232/278) Removing the following broken/ unserviceable parts from teapoy wooden and supply and fixing new part made out of 1st class hard wood teak complete all as specified , shown on drawings and directed:-

Top side long rail

Top side short rail

Stiffener

TABLE PEG (DRG NO FD-236/ 277) Removing the following broken/ unserviceable parts from table peg and supply and fixing new part made out of 1st class hard wood teak complete all as specified , shown on drawings and directed:-

Top side long rail

Top side short rail

Stiffener

TABLE WRITING/ TABLE WRITING MEDIUM (DRG NO FD-275) Removing the following broken/ unserviceable parts from table writing/ table writing medium and supply and fixing new part made out of 1st class hard wood teak complete all as specified , shown on drawings and directed:-

Top side long rail

Top side short rail

Stiffener

Wooden drawer having sides and back made of 12mm thick commercial plywood BWR, front made of 19mm thick prelaminated particle board one side with decorative choice laminates & other side balancing white, bottom made of 6mm thick ply commercial on both faces complete.

Shutter of the cupboard made out of 19mm thick prelaminated particle board one side with decorative choice laminates & other side balancing white with beading alround and piano hinges of required size as specified.

Shelf of cupboard made of 19mm thick prelaminated particle board one side with decorative choice laminates & other side balancing white including replacement of wooden bearers made out of 1st class hard wood teak.

Back ply and sides of the box which house the drawer and cupboard of table writing made of 6mm thick ply and sides made of 19mm thick prelaminated Particle Board one side with decorative choice laminates & other side balancing white.

M&L for removing of existing unserviceable top of table of any sorts and supply and fixing of new top of same size made out of 18/19mm thick both side pre laminated exterior grade MDF board grade-I with ISI marked IS Code-14587 including 4mm teak wood beading all around duly polished complete all as specified and directed.

TABLE DRESSING LADIES (DRG NO FD-251)

M&L for replacement of disfigured mirror fixed to frame work made of hard wood teak with back support of 6 mm thick commercial plywood and fixing the same to the table complete all as specified and directed.

S&F in replacement legs made out of 1st class hard wood Teak as per drawing.

M&L for removing old unserviceable drawers and S&F new drawers with sides and back made of 12mm thick teak wood plank, bottom of drawer made of 6mm thick commercial plywood, front of drawer shall be of 19mm thick Particle Board commercial laminated with 1.5mm thick sunmice and 3mm thick teak wood edging provided to all sides, front and edges of drawers complete all as specified and directed.

M&L for removing old unserviceable back of table dressing ladies and S&F new back made out of 12mm thick particle board commercial on both sides complete all as specified and directed.

M&L for removing old unserviceable top of table dressing ladies and S&F new top made out of 19mm thick pre-laminated Particle Board one side with decorative choice laminates & other side balancing white complete all as specified and directed.

TABLE DRESSING GENTS (DRG NO FD-230)

M&L for replacement of disfigured mirror fixed to frame work made of hard wood teak with back support of 12 mm thick commercial plywood provided with key plates complete all as specified and directed.

M&L for removing old unserviceable drawer of table dressing gents and S&F new drawer having front made of 12mm thick pre-laminated Particle Board teak veneer face, sides of 12mm thick teak wood plank running smoothly in the drawers, bottom and back of drawer made of 6mm thick plywood commercial on both sides complete all as specified and directed.

M&L for removing old unserviceable top of table dressing gents and S&F new top made out of 12mm thick pre laminated Particle Board with teak veneer face on one face all as specified and directed.

M&L for providing dressing table box into the wall by means of L-shaped MS iron angles (02 Nos for each box) of size 25mm x 25mm x 3mm in section, having diagonal MS stiffeners and machine screws of appropriate size as per best trade practice. Note: MS angles shall be provided by the contractor and fixed on walls at various sites/ users location as specified and directed.

M&L for fixing mirror of dressing table gents into the wall with the help of MS key plates 25mm x 25mm x 3mm in section and MS screws of required sizes complete. Note: Fixing of mirrors shall be done at various sites/ users location as specified and directed.

TABLE COMPUTER/ TABLE COMPUTER MAP (DRG NO FD/E6/MAP-03)

M&L for removing unserviceable top of table computer and S&F new top made out of 18mm thick pre-laminated particle board with 4mm thick teakwood beading all round complete all as specified, shown on drawing and as directed.

M&L for removing of unserviceable side of table computer and S&F new side for table computer made out of 18mm thick pre-laminated particle board all as shown on drawing and as directed.

M&L for removing of unserviceable key board tray and S&F new key board tray of appropriate size made out of 18mm thick pre-laminated particle board complete all as specified, shown on drawing and as directed.

M&L for removing unserviceable tray (mouse) & drawer of table computer and S&F new mouse tray & drawer complete all as specified, shown on drawing and as directed.

S&F in replacement telescopic channel of best quality as approved by Engineer-in-Charge for mouse tray & drawer.

S&F in replacement telescopic channel of best quality as approved by Engineer-in-Charge for key board tray.

S&F in replacement handle for drawer (as per sample approved)

S&F shoe for table computer.

TABLE BED SIDE (DRG NO FD/E6/MAP-15)

M&L for removing of unserviceable top and S&F of new top made out of 18mm thick pre-laminated particle board having teakwood beading all round duly polished complete all as specified and as directed.

M&L for removing of unserviceable back & sides and S&F new back & sides made out of 18mm thick pre-laminated particle board complete all as specified and as directed.

M&L for removing unserviceable MS frame work and S&F new frame work complete made of 18 mm square MS pipe (18 Gauge) painted with black colour enamel paint complete all as specified and directed.

S&F in replacement telescopic channel for drawer made to existing specifications complete all as specified and directed. Note:- Telescopic channel to be got approved by Engineer-in-Charge.

S&F in replacement handle for table bed side map with screws.

BED PLY TOP (DRG NO FD-246)

M&L for removing of existing unserviceable head board and S&F of new head board throughout teak wood and the inner portion of frame made out of deodar wood one side teak face ply of exterior grade, size and thickness dult French polished complete all as specified, directed and shown on drawing.

All as per Srl item No 12.01 above but foot board

M&L for removing existing unserviceable ply of bed ply top and supply and fixing new ply of 12mm thick, BWR grade 7 ply.

M&L for removing existing long rail and supply and fixing new long rail made of Sal wood duly French polished of size as per drawing complete all as specified and directed.

M&L for removing existing stiffener and supply & fixing new TW stiffener of size 40mm x 60mm joining the long rails complete all as specified and directed.

SOFA SET FIVE SEATER/FOUR SEATER (DRG NO FD-281) M&L for removing the following broken/ unserviceable parts from sofa set five seater/ four seater and supply and fixing new part made out of 1st class hard wood teak complete all as specified, shown on drawings and directed:-

Leg of section 70mm x 35mm.

Wooden batten 50mm x 20mm in section for seat/ back of sofa set.

Long rail of back rest of sofa three seater.

Long rail of back rest of sofa single seater.

Styles of back rest of size 70mm x 35mm in section.

Front rail of sofa to seat three

Side rails of sofa set 4 seater/ 5 seater.

Front rail of sofa single chair

TV TROLLEY (DRG NO FD/E6/MAP/06(R))

M&L for removing existing top of TV trolley and supply and fixing new top made of 19mm thick pre-laminated particle board teak veneered surface complete with beading alround.

All as per Srl item No 14.01 above but side of TV trolley.

All as per Srl item No 14.01 above but sliding pull out tray of TV trolley.

All as per Srl item No 14.01 above but sliding drawer along with telescopic channels on both sides of TV trolley

All as per Srl item No 14.01 above but glass shutter, stainless steel fitting (two Nos) and push type magnetic catcher.

All as per Srl item No 14.01 above but brass handle of shutter of TV trolley.

All as per Srl item No 14.01 above but bottom of TV trolley.

All as per Srl item No 14.01 above but wheel of TV trolley.

All as per Srl item No 14.01 above but magnetic catcher of TV trolley.

HAT STAND WITH MIRROR (DRG NO FD-233)

M&L for removing of unserviceable back ply and S&F new 6mm thick plywood commercial both side BWR quality.

M&L for removing of unserviceable front teak face ply and S&F New plywood one side teak & one side commercial 4mm thick BWR quality.

M&L for removing of disfigured mirror and S&F new mirror 5mm thick all as per drawing and as directed.

S&F key plate of appropriate size to the back all as per drawing & as directed.

S&F peg hook brass 125mm with brass screws all as shown on drawing and as directed.

Note:- All exposed wooden surface shall be French polished with highly glossy finish all as shown on drg and as directed by Engineer-in-Charge.

SIDE BOARD (DRG NO FD-241)

M&L for removing old unserviceable top of and S&F new top made out of 19mm thick pre-laminated particle board with natural teak face irrespective what is shown on drawing.

M&L for removing old unserviceable back and S&F new back made out of 6mm thick commercial plywood. Rest all as shown on drawing.

M&L for removing old unserviceable drawer and S&F new drawer with front of drawer made of 19mm thick veneer one face particle board, side and back of 12mm thick particle board having commercial ply on both sides and bottom of drawer shall be of 6mm thick plywood commercial complete all as specified and directed.

M&L for removing old shutter and S&F new shutter made out of 19mm thick pre-laminated particle board face teak veneer including provision of continuous piano hinges complete all as specified and directed.

CHAIR DINING (DRG NO FD-279) M&L for removing the following broken/ unserviceable parts from chair dining and supply and fixing new part made out of 1st class hard wood teak duly French polished complete all as specified , shown on drawings and directed:-

Rear leg made to shape as per drawing.

Front leg made to shape as per drawing.

Front rail made to shape as per drawing.

Rear rail made to shape as per drawing.

Side rail made to shape as per drawing.

Bottom stiffener made to shape as per drawing.

CHAIR WRITING (DRG NO FD-202, FD-250 & FD-280) M&L for removing the following broken/ unserviceable parts from chair dining and supply and fixing new part made out of 1st class hard wood teak duly French polished complete all as specified , shown on drawings and directed:-

Rear leg made to shape as per drawing.

Front leg made to shape as per drawing.

Arm made to shape as per drawing.

Side, front & back rail made to shape as per drawing.

Back rest made to shape as per drawing.

Stiffener (side & central) made to shape as per drawing.

CHAIR EASY (DRG NO FD-201 & FD-229) M&L for removing the following broken/ unserviceable parts from chair dining and supply and fixing new part made out of 1st class hard wood teak duly French polished complete all as specified, shown on drawings and directed:-

Rear leg made to shape as per drawing.

Front leg made to shape as per drawing.

Arm made to shape as per drawing.

Front & back rail of seat/ back made to shape as per drawing.

Side rail of seat/ back made to shape as per drawing.

CHAIR DINING MAP (DRG NO FD/E6/MAP/10)

S&F in replacement of rear leg with new leg made of 1st class hard wood teak made to shape and size complete including polishing to match all as specified, shown on drawing and directed.

All as per Srl item No 20.01 above but front leg.

All as per Srl item No 20.01 above but side/ back/ front rails.

All as per Srl item No 20.01 above but bottom stiffener.

M&L for taking out old unserviceable cushion seat and S&F cushion seat of 75 mm thick, 32 density foam with 12 mm thick plywood bottom covered with superior quality tapestry cloth cover stitched to make good shape (Tapestry cloth cost not less than Rs.350/- per metre) complete all as specified and directed. Note: Colour & pattern as approved by GE/Engineer-in-Charge.

M&L for taking out seat with old soiled/ torn seat cover from the chair and cover the cushion with superior quality tapestry cloth cover stitched to make good shape (Tapestry cloth cost not less than Rs.350/- per metre) complete all as specified and directed. Note: Colour & pattern of tapestry cloth as approved by GE/ Engineer-in-Charge.

TABLE ONE PIECE ALL PURPOSE M&L for removing the following broken/ unserviceable parts from table one piece all purpose and supply and fixing new part made out of 1st class hard wood teak duly French polished complete all as specified, shown on drawings and directed:-

Leg made to shape as per existing one.

Top side long rail made to shape as per existing one.

Top side short rail made to shape as per existing one.

Stiffener made to shape as per existing one.

TABLE CENTRE TWO TIER (4'x2') M&L for removing the following broken/ unserviceable parts from table centre two tier and supply and fixing new part made out of 1st class hard wood teak duly French polished complete all as specified, shown on drawings and directed:-

Leg made to shape as per drawing.

Top side long rail made to shape as per drawing.

Top side short rail made to shape as per drawing.

Stiffener made to shape as per drawing.

Bottom tier made of prelaminated MDF board 18 mm provided with 4 mm thick TW beading all around.

TABLE DINING 4 PERSONS 1200MM x 900MM

M&L for dismantling unserviceable leg and providing and fixing new leg made of 1st class hard wood teak leg duly French polished complete all as specified and directed.

All as per Srl item No 23.01 above but top side long rail.

All as per Srl item No 23.01 above but top side short rail

M&L for recanning of chairs or other articles of furniture with best quality plastic cane 2mm wide half round in Godrej pattern including removal of old cane complete all as specified and directed.

M&L for recanning of chair verandah with best quality plastic cane 4mm wide half round in mat pattern including removal of old cane complete all as specified and directed.

S&F knob CP brass for side board/ table dressing ladies/ gents with machine screws 25/ 40mm.

M&L for replacement of old worn out cushion of sofa set and S & F new cool foam cushion 32 density, 100 mm thick with superior quality tapestry cloth cover duly stitched to make good shape (Tapestry cloth not less than Rs.350/- per metre) complete all as specified and directed. Note: Colour & pattern of tapestry cloth as approved by GE/ Engineer-in-Charge. Cushion shall be brought to BSO furniture yard in company packing for approval by Engineer-in-charge and then stitched in yard under supervision of Supervisor (B/S). (Drg No. FD- 281) ’’.

M&L for cleaning and dusting, removal of unwanted settled dirt from every exposed wooden surface with sand paper, filling the cracks with putty, making the surface smooth and polishing with French spirit polish (Spirit polish mixture of spirit & lakh dana) with fine quality malmal cloth complete all as specified and directed for the following articles:-

Bin soiled linen (Drg No FD-244)

Bed ply top (Drg No FD-246)

Chair easy (Drg No FD-229)

Chair writing (Drg No FD-250 & 280)

Chair dining (Drg No FD-279 & 16(R)(MAP))

Hat stand with mirror (Drg No FD-233)

Side board (Drg No FD-241)

Sofa single chair (Drg No FD-281)

Sofa set 4 seater (4 small pieces to seat one each) (Drg No FD-281)

Sofa set 5 seater (one large piece to seat three and two small pieces to seat one each) (Drg No FD-281)

Table writing (Drg No FD-275, FD-282, FD-252)

Table peg (Drg No FD-277)

Table bed side (Drg No FD-276)

Teapoy wooden (Drg No FD-278)

Table centre (Drg No FD-235 & 274)

Stool dressing CB (Drg No FD-282 & 252)

Table dinning for 8 persons (Drg No FD-239 & 273)

Table dinning for 6 persons (Drg No FD-239 & 273)

Table dining 1200mm x 900mm (Drg No FD-165(M))

Table dressing ladies (Drg No FD-251)

Table dressing gents (Drg No FD-230)

Table office officer wooden

Table office clerk wooden.

Table 900mm x 600mm x 760mm without drawer (Drg No FD-284)

Table 900mm x 600mm x 760mm with drawer (Drg No FD-283 & 224)

Almirah large wooden.

Almirah medium wooden.

Chair CBA wooden

Table one piece all purpose (Drg No Spl)

Material and labour for cleaning and dusting , removal of unwanted settled dirt from every exposed wooden surface with sand paper, filling the cracks with putty, making the surface smooth and Melamine polished with high glossy finish with fine quality malmal cloth is to be done at furniture yard/ users location and as directed for the following articles :-

Teapoy wooden (Drg No FD-278)

Table centre (Drg No FD-235 & 274)

Bed ply top (Drg No FD-246).

Table peg (Drg No FD-277).

B S FURNITURE

CITIZEN FURNITURE INDUSTRIES

M/S Bangali Ram

Daya Nand Jindal

Modern Enterprises

Janeshwar Dass Narender Kumar Jain

RG Builders