Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.9 LAccepted-AOC | L1 | Accepted-AOC Other than Lowest Bidder | |
| 2 | L2₹26.7 L+₹25,660 (0.97%)Rejected-AOC | L2 | Rejected-AOC Other than Lowest Bidder | |
| 3 | L3₹27.3 L+₹79,850 (3.02%)Rejected-AOC | L3 | Rejected-AOC Other than Lowest Bidder | |
| 4 | L4₹32.1 L+₹5.6 L (21.0%)Rejected-AOC | L4 | Rejected-AOC Other than Lowest Bidder |
Tender Value
₹28.5 L
EMD Value
₹57,000
Closing Date
3 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(S) Jaipur
Garrison Engineer (South) Jaipur Military Engineer Services Kalyan Marg, Jaipur302006
ADDN/ ALTN TO 10 X TOILETS AT KV-04 UNDER GE (S) JAIPUR MIL STN UNDER GE (S) JAIPUR
2022_MES_528744_2
GE (S)/J-10P /2022-23 8722/E8
Open Tender
Civil Works
Item Rate
180 days
Jaipur
As per Tender documents page No 7 to 12
9 documents required · 9 mandatory
₹500
Yes
GE (S) Jaipur
₹57,000
Yes
12 Aug 2022
14 Jul 2022
5 Aug 2022
14 Jul 2022
3 Aug 2022
21 Jul 2022
Amount
Taking down cement plaster, any description on brick or stone walls, etc. incl. raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed by Engr-in-Charge.
M&L rendering 15 mm thick on stone masonary surface or surface or other surface fair face of brickwork in CM (1:4) complete all as specified and as directed by Engr-in-Charge.
M&L Rendering 15 mm thick on stone masonary surface or surface or other surface fair face of brickwork in CM (1:6) complete all as specified and as directed by Engr-in-Charge.
M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and as directed by Engr-in-Charge.
Taking down Chowkats or frames n. exc 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and as directed by Engr-in-Charge.
All as per item No 05 above but area exc 1.50 But not exc 4 Sqm each complete all as specified and as directed by Engr-in-Charge.
M&L Powder coated aluminium (minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. including taking down old window/ventilator complete all as specified and as directed by Engr-in-Charge. NOTE: Glass/ guage wire mesh will be measured seperately under relevant items.
Dismantling old and S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engr-in-Charge.
M&L Preperation of new wooden surfaces of any description, not otherwise, described, over 10cm width or girth and Applying two coats of synthetic enamel paint on wooden surfaces over one coat of pink primer complete all as specified and as directed by Engr-in-Charge.
M&L Preparation of new Steel surface of any description, not otherwise, described, over 10cm width or girth and Applying two coats of synthetic enamel paint on steel & iron surfaces over one coat of red oxide, zinc chrome complete all as specified and as directed by Engr-in-Charge.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed by Engr-in-Charge.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppyling & fixing in opening as per specification & drawing complete all as specified and as directed by Engr-in-Charge.
S&F 35mm thick 2nd class HW rail and style factory made plain, framed, panelled shutter (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail & steel as per IS:1003 (Part-I) kiln seasoned & chemically pressure treated complete all as specified and as directed by Engr-in-Charge.
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete all as specified and as directed by Engr-in-Charge.
S&F 100mm Butt hinges size Aluminium Anodised complete all as specified and as directed by Engr-in-Charge.
S&F Aluminium, anodised, barrel tower bolts 150 mm long complete all as specified and as directed by Engr-in-Charge.
S&F Aluminium handles 125 mm size, . type, anodised complete all as specified and as directed by Engr-in-Charge.
S&F 300mm Aluminium alloy, anodised, sliding door bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed by Engr-in-Charge.
S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and as directed by Engr-in-Charge.
S&F Figured glass 4.0mm thick, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane complete all as specified and as directed by Engr-in-Charge.
S&F in repairs vitreous china water closet Indian type 580 mm X 440 mm long pan white with 'P' or 'S' trap front or back inlet footrest including provn of lime concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match, complete all as specified and as directed by Engr-in-Charge. complete all as specified and as directed by Engr-in-Charge.
S&F in repairs PVC valve less syphonic action type low level flushing cistern with inlet ball valve float and handle incl bracket 10 Lit capacity complete all as specified and as directed by Engr-in-Charge.
Dismantalling of cast iron or reinforced concrete drain pipe jointed in CM and taking out of trenches if required internal dia of pipe 75mm/100 mm complete all as specified and as directed by Engr-in-Charge.
S&F Cast iron 75mm bore Sand cast soil, waste & vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors complete all as specified and as directed by Engr-in-Charge.
S&F Cast iron 100 mm bore Sand cast soil, waste & vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors complete all as specified and as directed by Engr-in-Charge.
S&F Cast iron 75 mm bore Sand cast soil, waste & vent pipes, in any length with or without ears with cement joints, fixed to walls complete all as specified and as directed by Engr-in-Charge.
All as item no 26 above but 100 mm bore complete all as specified and as directed by Engr-in-Charge.
S&F in repairs Cast iron 75 mm bore Bends (any radius), diminishing pieces or tapers (larger bore meassured ) complete all as specified and as directed by Engr-in-Charge.
All as item no 28 but 100 mm bore complete all as specified and as directed by Engr-in-Charge.
S&F in repairs cast iron 75 mm bore branches pieces single (equal or unequal) ordinary or inverted (spigot or socket type ) or with paralllel branches complete all as specified and as directed by Engr-in-Charge.
All as per item no 30 but 100 mm bore complete all as specified and as directed by Engr-in-Charge.
S&F in repairs cast iron 100 mm bore cowls complete all as specified and as directed by Engr-in-Charge.
M&L in repairs cast iron floor trap 75 mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed by Engr-in-Charge.
S&F in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical 3 layered with closed top) hoisted & fixed in position all as specified in SSR Part I 1000 Ltrs Capacity complete all as specified and as directed by Engr-in-Charge.
S&F Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed by Engr-in-Charge.
S&F in repairs Bib taps 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule fancy type complete all as specified and as directed by Engr-in-Charge.
S&F in repairs Stop valve 15 mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-Charge.
All as per item no 37 but 20 mm bore complete all as specified and as directed by Engr-in-Charge.
All as per item no 37 but 25 mm bore complete all as specified and as directed by Engr-in-Charge.
Dismantling and taking up or down the existing unserviceable GI pipe and M&L for new galvanised 15 mm bore steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by Engr-in-Charge.
All as per item no 40 but 20 mm bore complete all as specified and as directed by Engr-in-Charge.
All as per item no 40 but 25 mm bore complete all as specified and as directed by Engr-in-Charge.
S&F Fe 410 -W (Gde- E- 250) Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and incl.12 mm dia deformed bars( Tie bar) for strengthening at bottom of chowkhat incl.cutting floor to accommodate strengthening bar & making good in PCC(1:2:4) type B0 complete all as specified and as directed by Engr-in-Charge.
S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 including necessary welding etc. and fixed in position complete all as specified and as directed by Engr-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-Charge.
M&L Coloured Glazed ceramic tiles size 300x450mm x 7mm thick edge cut/ joint free , on walls etc in the combination of light and dark shed concept . set & jointed in neat cement slurry & pointed in white/coloured cement to match over 15mm thick plaster in cement mortar (1:4) Pattern and colour complete all as specified and as directed by Engr-in-Charge.
M&L Coloured Non Skid Ceramic tiles joint free 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc, set and jointed in neat cement slurry or tiles addeshive and pointed in white or coloured cement to match over 15mm thick plaster in cement mortar (1:6) Pattern and colour complete all as specified and as directed by Engr-in-Charge.
Demolition of stone setting paving of any discription of any thickness laid ,bedded and pointed in any mortar complete all as specified and as directed by Engr-in-Charge.
M&L 25mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms, WHB Counter, Urinal Partitions and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engr-in-Charge.
M&L Preperation of new plastered or unplastered surfaces of brick/concrete wall of any description and applying two coats of oil bound distemper complete all as specified and as directed by Engr-in-Charge.
M&L Preperation of new plastered or unplastered surfaces of concrete surfaces of any description and applying three coats of white wash on ceiling complete all as specified and as directed by Engr-in-Charge.
Water Proof Treatment to RCC Roof comprises the following, complete all as specified and as directed by Engr-in-Charge:- (a) Complete removal of existing roof treatement and disposed off the rubbish outside the defence land (b) All visible cracks to be opened up in V shape cleaned properly with wire brush washed and filled with cracks filling compound using cracks upto 15mm width of cracks (c) cracks of 15mm width are filled with URP cement grouting by injecting nozzles by authorised applicator of manufacturer carefully by following manufacturer's instructions (b) after drying one coat of roof coat paint shall be applied with roller in both directions with a gap of 12 hrs @ 1 Ltr per Sqm (each direction) of roof coat over a roof priming coat of 0.5 Ltr of water mixed to 1 ltr of roof coat (e) necessary gurantee for 5 years shall be submitted by the contractor complete all as specified and as directed by Engr-in-Charge.
Demolition of old existing unserviceable EWC seat and S&F vitreous china wash down water closet pan ( Pedestal pattern ),white including connection to drain (or outgoing pipe) and to flushing pipe,anti-sypohonage pipe etc. & with plastic WC seat cover white in colour closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engr-in-Charge.
M&L PCC 1:2:4 mix type B-0 (using 12.5 mm graded aggregate ) as in roof kerbs rounded or chamfered on edges complete all as specified and as directed by Engr-in-Charge.
Demolition of Brick work built in cement mortar complete all as specified and as directed by Engr-in-Charge.
M&L Old size Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and as directed by Engr-in-Charge.
M&L Old size Brickwork with subclass `B' bricks, straight or curved on plan any radius in half brick thick wall, built in CM (1:4) complete all as specified and as directed by Engr-in-Charge.
S&F aluminium anodised floor door stopper overall length 140 mm double legged with rubber shoe, fixed to bottom rail of door complete all as specified and as directed by Engr-in-Charge.
S&F MS spring hinges 300 mm, ordinary rat tail rod pattern including roller and roller plate complete fixed to wooden/ angle iron chowkats complete all as specified and as directed by Engr-in-Charge.
S&F Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and as directed by Engr-in-Charge.
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by Engr-in-Charge.
S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets & Waste fittings 32mm bore, brass, CP complete all as specified and as directed by Engr-in-Charge.
S&F in repairs CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and as directed by Engr-in-Charge.
S&F PVC Waste Pipe 32 mm bore for WHB & urinal complete all as specified and as directed by Engr-in-Charge.
S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including PVC pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed by Engr-in-Charge.
M & L Preperation of new plastered surfaces of wall and applying two coat of plastic enamel paint over a coat of priming paint complete all as specified and as directed by Engr-in-Charge.
M & L Preperation of old painted surfaces of wall and applying two coat of plastic enamel paint complete all as specified and as directed by Engr-in-Charge.
M&L Complete removal of existing treatement of wall and applying two coats of oil bound distemper of approved tint over a coat of 1mm thick birla wall care putty complete all as specified and as directed by Engr-in-Charge.
M&L Preperation of new Plastered surfaces of wall and applying two coats of weather based paint over a coat of 1mm thick birla wall care putty on wall complete all as specified and as directed by Engr-in-Charge.
M&L complete removal of exsisting treatment from wall and preperation of old surfaces of wall and applying two coats of weather based paint over a coat of 1mm thick birla wall care putty on wall. complete all as specified and as directed by Engr-in-Charge.
M&L applying three coats of white wash on ceilling complete all as specified and as directed by Engr-in-Charge.
Supply only Integral waterproofing compound complete all as specified and as directed by Engr-in-Charge.
S &F PVC(SWR)110mm dia Pipes single socketed in any length with rubber ring joints iaid in trenches or in floors
E/M Portion Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell/buzzer,bracket light fittings etc(excluding fans and fan regulators) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed by directed Engr-In-Charge to match with existing surface. complete all as specified and as directed by Engr-in-Charge.
M&L for point wiring using approved colour coding as per IS, with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade (ISI marked) in and including PVC Casing and capping medium grade ISI marked with mounting frame and over cover plate including, Mild steel Sunken box, earth dolly with zinc coated and 3 mm thick phenolic laminated sheet top cover including 1.5 sqmm single core PVC insulated and unsheathed copper conductor FRLS cable 1100 V grade (ISI marked) earth continuty conductor to common earth and connected as continuous earth wire to earth dolly compiete all as sprcified and ditected for followings :-
One light/fan/ bell point controlled by one switch complete all as specified and as directed by Engr-in-Charge.
One 3 pin 5 Amp socket outlet on the same board with other switches complete all as specified and as directed by Engr-in-Charge.
One 3 pin 5 Amp socket outlet on independent board with other switches complete all as specified and as directed by Engr-in-Charge.
All as per item No 74.00 above but Point wiring with 2.5 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 2.5 Sqmm copper cable continuous earth wire and connecting to common earth dolly complete all as specified and directed. complete all as specified and as directed by Engr-in-Charge.
S&F in repairs of switch, piano type flush/ Bell push button type 230/250 volts ISI marked complete all as specified and as directed by Engr-in-Charge of following:-
Switch piano, flush type, Single pole , one way 5 Amp complete all as specified and as directed by Engr-in-Charge.
All as above but 15 Amp complete all as specified and as directed by Engr-in-Charge.
S & F Socket Outlet 2 in 1 Piano type 230/250 Volts, 2 in 1,3 pin 5 Amp, complete all as specified and as directed by Engr-in-Charge.
S & F Socket Outlet type 230/250 Volts, 2 in 1,3 pin, 5 & 15 Amp, flush type, complete all as specified and as directed by Engr-in-Charge.
S&F in repair Ceiling rose surface bakelite, 3 Phase/ PVC/ Polycarbonate isolated body (ISI marked) complete all as specified and as directed by Engr-in-Charge.
S & F in repair lamp holder angle type PVC/Polycarbonate type with cord grip cap insulated body with back plate for pendant fitting including 10 Watt LED Lamp complete all as specified and as directed by Engr-in-Charge.
Supply and fix Batten LED light fittings 20/22 Watt, 240 Volt 4 feet size long life surface/wall mounting IP 20 Luminaire per watt maximum extruded alluminium housing with frosted PMMA diffuser with high brightness LEDs complete with all accessories pre wired twin core twisted flexible copper conductor cable with suitable size. Make: Crompton Cat part No. LCTN-20-CDL or equivalent. complete all as specified and as directed by Engr-in-Charge.
M & L for sub main wiring with 6 sqmm two single core multi stranded copper conductor PVC insulated, FRLS but unsheathed cable 1100 Volts grade drawn through and including 25 mm dia rigid conduit medium grade with all conduit accessories and fixed on wall/surface as directed including 4.00 sqmm PVC insulated multistranded copper earth contuinity conductor including taking down old unserviceable sub main wiring complete all as specified and as directed by Engr-in-Charge.
S&F factory made sheet distribution board double door protection class IP-42 double door type suitable for mounting MCB/MCCB conforming to IS 13032 IS- 8623 and BS 5484 with minimum 200 Amps bus bar of under mentioned ratings complete all as specified and as directed by Engr-in-Charge. (Note: Cost of wall cutting for suitable mounting of DBs in recess alongwith proper connection with suitable lugs and making good disturbed surfaces with PCC work will be inclusive in above item quoted price.)
SP & N 8 ways complete all as specified and as directed by Engr-in-Charge.
Supply and fix MCB 10 KA conforming to IS-8828 : 1996 : IEC-898 : 1995 rupturing capacity of the under mentioned type and rating complete all as specified and as directed by Engr-in-Charge.
SP from 5 upto 32 Amps rating complete all as specified and as directed by Engr-in-Charge.
SP above 32 upto 63 Amps rating complete all as specified and as directed by Engr-in-Charge.
Supply and fix fresh air fan 300 mm in sweep, 220/240 Volts 1400 RPM with mounting ring and louvers including three core flexible PVC insulated multi stranded copper conductor cable of size 1.5 Sqmm from ceiling rose Make: Orient Cat part No. Domestic Exhaust 300mm Air Flow Exhaust Fan (Exp) or equivalent complete all as specified and as directed by Engr-in-Charge.. ( Note: Old Unsv Exhaust Fan will be deposited to KV School for Disposal)
Material and labour for cutting hole of 300 mm dia in existing stone wall suitable for fixing exhaust fan using with drilling equipment making good the disturbed surface plastering the surface with cement mortar 1:6 complete and matching the disturbed surface with existing surface complete all as specified and as directed by Engr-in-Charge.
S&F in repairs Energy efficient LED security lights of 30 Wattage of IP 66 with PDC Aluminium body and clear glass, LED lens for wide beam distribution with efficacy greater than 100 Lm/watt , 5700K CCT, pf more than .90 all as specified and as directed by Engr-in-charge. (Note:- Bracket along with screw to fix on wall/surface duly painted by silver colour paint will be included in above quoted rate.) Make - Crompton Cat Part No. LSTS-30-CDL-M or Equivalent complete all as specified and as directed by Engr-in-Charge.
M&L Earthing complete as per electrical plate No. 3 of MES SSR Part-I with galvanised steel earth plate electrode 60cmx60cmx6.0 mm thick, buried directly vertically in ground in a pit depth not less than 2.5 metres below ground level with top edge of earth plate at a depth not less then 1.8 metre below normal ground level connected to and including galvanised iron or steel earth wire 4 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel. Earthing wire shall be protected by galvanised iron or steel pipe 15 mm bore medium grade and connected to continuous earth wire on pole / test point to main board. Watering pipe shall be 20 mm bore GI medium grade. The earthing shall be of inclusive of excavation & earth work in any type of soil, charcoal, salt, funnel PCC pit and RCC cover complete all as specified & directed as well as testing included. Note-: Following items deemed to be included in quoted rate (a) Earth Electrode (b) Main earthing lead from earth electrode to test point and further to equipment to be earthed upto 7.5 metre (c) M&L for connecting earth electrode and earthing lead as specified (d) Adequate quantity of charcol dust and common salt as directed (e) All labour involved including testing of earth net work (f) Excavation and earth work or drilling hole for electrode (g) P.C.C pit and C.I cover (h) Funnel and watering pipe, wire mesh and copper lugs etc. as specified (j) G.I protection pipe of size ordered specified for protection of earthing lead from mechanical injury or tempering. (k) connected lead from test point to main switch or switch board or equipment to be earthed rest complete all as specified and as directed by Engr-in-Charge.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .