Miscellaneous Civil, PH, Internal Painting and Electrical work in vacant flats under TTM-III Unit at Anushaktinagar, Mumbai

NAME OF WORK Miscellaneous Civil, PH, Internal Painting & Electrical work in Vacant flats under TTM-III Unit At Anushaktinagar, Mumbai

NIT NO DCSEM/CQD/QSB/NIT/64 dt. 09.01.2026

Tenderers are advised to visit the site of work with prior permission of Engineer-in-charge/authorised representative, to acquaint themselves with the nature and location of work before quoting tender. Tenderers shall visit the site of work, at their own cost. The request email for site visit may be sent well in advance (preferably three working days before) for preparation of visitor pass, fixing suitable & mutually agreed date & time for site visit. The email ID for site visit is mentioned in tender documents.

The work is to be carried out in vacant flats of occupied buildings, hence the work shall be carried out with least disturbance to the residents.

All safety & security regulations shall be followed strictly as per specifications & conditions of contract.

The Job card for each flat shall be issued on weekly basis, Work shall be completed in all respects in maximum of 30 Days. If agency fails to complete the work in stipulated time frame, a penal recovery of Rs. 1500 per flat per day shall be levied. Decision of Engineer-In-Charge shall be final and binding to agency.

The agency shall have to commence the work and execute an average of Seven flats per week, subject to availability of flats.

The contractor shall provide sleeveless Jackets to the workers in required pattern, colour showing name of contractor with address and telephone number as approved by the Engineer in charge. All the workers must wear the same while on duty.

Contractor shall take contractor’s all risk insurance policy in respect of entire scope of work for entire period of contract and submit copy of the same before commencement of the work. "If there is a gap in CAR insurance policy period a panalty of 1.5 times of the premium amount of original policy value shall be recovered , proportionately for the gap period."

Security measures to be followed by the contractor : i) Contractor should provide uniform to all regular labour and fluorescent visi wears to all casual labour deputed at site for proper identification. ii) The contractor should issue I-Card to all workers deployed on regular basis and list of such workers vetted by site Engineer should be submitted to DCSEM Security at Main Gate. iii) The supervisor of contractor having photo pass shall bring daily wages workers/ casual workers inside premises for work subject to following conditions. (i) He should prepare list of such workers in duplicate. The original copy would be handed over to DCSEM security at Main Gate and obtain endorsement on duplicate copy and the duplicate copy would remain with the contractor. (ii) Departmental staff deputed to supervise the work has to verify the reporting of such workers at site. iv) You shall follow all safety rules & security procedure that are in vogue and applicable during execution of work. You are requested to verify the character and antecedents of the labourers employed by you, through local address proof issued by competent authorities such as ration card, driving license, electricity bills, telephone bill, gas connection document etc. The nationality of contract labourers also needs due verification. v) You are requested to obtain immediately Police Verification Reports of your regular staff deployed at site(s) in respect of maintenance contract works and submit the same along with necessary application to allow them to enter in premises to carry out the assigned work.

i) No debris shall be left over around the building during the renovation works. An area for 'Debris bins' will be identified close to his site office or inside Anushaktinagar colony at the location identified by EIC on the request of contractor for collection of debris generated on day to day basis. The Debris from debris bin shall be cleared every month. The contractor must maintain adequate number of wheel borrows all the time for shifting the debris to Debris bin. If the debris lies around the building for more than 2 days, penalty @ Rs. 500/- per day per flat shall be levied w.e.f. 3rd day onwards. ii) The debris generated shall be disposed by mechanical transport to the nearest dumping pit inside Anushaktinagar colony as directed by EIC with all leads, loading, unloading etc. complete. No payment shall be released unless certificate from EIC showing clearance of debris is produced in each RA bill and Final bill.

Penal recovery shall be made at the rate of Rs. 1500/- per flat per day, if water taps / bib cocks, flushes etc. are left open. In case of any further material loss due to this negligence in other flats, same will have to be borne by contractor.

Wherever material are replaced with new one, quoted rate includes removing existing one and depositing the serviceable material at departmental store and disposing off debris inside Anushaktinagar colony at the location identified by EIC

The cement sand mortar use shall be factory manufactured pre mix/ready mix of 'Roofit Mix 'of M/ s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/sWalplast Products pvt.ltd/ 'Readiplast' of M/s UltratechCement Ltd or other approved equivalent make, having minimum composition of C:S :: 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties,mechnical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer.

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority:

Name of Work: Miscellaneous Civil, PH, Internal Painting and Electrical work in vacant flats under TTM-III Unit at Anushaktinagar, Mumbai

Contract No: DCSEM/CQD/QSB/25-26/NIT/64 dt.09.01.2026

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority:

Name of Work: Miscellaneous Civil, PH, Internal Painting & Electrical work in Vacant flats under TTM-III Unit At Anushaktinagar, Mumbai

Contract No: DCSEM/CQD/QSB/NIT/64 dt. 09.01.2026

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

PART I : CIVIL WORKS 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

101 Repairing of loose / shaky vitrified tile flooring/ green marble/granite stone frames at all floors and levels using polymer modified cement based tile adhesive manufactured by Roffe Construction – NSA (Non Skid Adhesive) or M/s Bal Endura Chemicals– Gold Star or other approved equivalent. The repairing process will consists of following. (1) Complete checking by tapping of affected flooring area using solid wooden stick. Identifying the affected tiles for repair work. (2) Drilling holes through tiles and widenining of tile joints using cutter as per requirement. (3) Breaking of tiles and removing backing adhesive from original flooring, cleaning etc (If Required). Checking the original flooring by tapping using solid wooden stick and repairing of original flooring by breaking the original mosaic / cement tile flooring and filling with 1:4 ready mix cement sand mortar, curing etc complete. (4) Grouting the tile flooring using tile adhesive slurry through drilled holes, widened joints, opening made by tile breaking using trowel etc and by tapping of floor tiles etc. (5) Sealing of drilled holes, widened joints using white cement cleaning of flooring, removal of debris and disposal of debris inside colony. (6). Removing and refixing of Aluminium window/door shutter/MS grill for repairing work, after the repairing works (7) Complete checking by tapping of repaired flooring area using solid wooden stick after 7 days of repairing work in presence of departmental representative. The repaired work shall not make any hollow sound, loose/shaky motion of tiles. The entire repairing work shall be carried out as per direction and instructions of engineer-in-charge.' 2 Construction of chamber for 100mm sluices valve item3 10 Nos

102 Providing and laying at all floors and levels Vitrified tiles of first quality Marbonite of M/S H&R JHONSON (INDIA) Ltd or other equivalent approved make of approved colour, shade, pattern and of thickness as per manufacture's specifications, laid directly over tile, using polymer cum cement based adhesive (Type -II as per IS) manufactured by M/S Roffe construction or M/s Bal Endura chemicals or other approved equivalent in respect of flooring and fixed over 12 mm thick backing using ready mix cement mortar 1:4 in respect of skirting , close jointed and grouted white /colour cement slurry with pigments to match the colour of the tiles, finished to level, line, slope and plumb including cutting of tiles, making openings / cut out where necessary including wastage for odd shape of room and final cleaning of surfaces as required, curing etc. complete all as per specification,relevent IS code & as directed by the EIC. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

103 Providing & laying at all floors & levels first quality ceramic tiles of minimum thickness as specified by the manufacturer of M/S. H&R JOHNSON (INDIA) Ltd. or equivalent approved make of approved colors, shade and texture in flooring / dado / skirting as per approved pattern. incluidng cost of all materials, including cutting the tiles to required shape, wastage, pointing the joints with white cement mixed with matching pigments to match the colour of the tiles, finished to line, level, slope & plumb, final cleaning of surface as required, curing , making necessary opening cutouts etc.and including removing existing flooring / dado and disposing of debris inside Anushaktinagar colony at the identified locations complete all as per specifications, relevant IS code & as directed by the EIC. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

104 Providing & laying machine cut machine polished natural stones for repalcement of existing damaged stone in frames, kitchen platforms, cill, jambs, Facia etc including necessary cement mortar for backing/ bedding, araldite adhesive, close jointed and grouted with matching cement slurry and finished to line, slope, level, plumb, curing etc, as required including cutting of stone slabs, wastages, making cut outs wherever required etc all as per specifications and as directed by the Engineer in charge. (Cut size of stone will be measured) 2 Construction of chamber for 100mm sluices valve item3 10 Nos

104.01 25 to 30 mm thick cuddappa stone single side polished Sqm Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

106 Providing & fixing ordinary plain / frosted / Bajara sheet glass/ for MS openable/louvers or aluminium sliding windows , glass doors, vision panels etc of approved make of following thickness in various sizes as required at site, using first class glass oil putty of approved quality and make including supplying & fixing glazing pins, teak wood or aluminium beading, EPDM gasket etc with necessary screws, nails etc (as required), at all floors & locations including cutting the glass to required size, removing the existing broken / damaged glass panes from windows / doors / partitions etc. along with its old oil putty/gasket /beading etc. carefully and disposing off the un-serviceable material with in colony including wastage in cutting, transportation etc. complete all as directed by the Engineer-in-Charge. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

106.01 a) 4 mm thick plain glass for window panes sqm Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

110 Supplying and fixing following type of fittings, fixtures and fastenings of approved quality along with necessary CP brass screws, bolts, nuts, washers and other standard accessories etc. complete all as directed by the EIC. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

112 Supplying & fixing in position the following type solid core block board flush door shutters with commercial ply / teak veneer as specified below conforming to IS 2202-latest, with 20 mm thick teak wood lipping alround, fixing shutters in position to existing door frames at all floors by cutting/ planing if necessary including the labour for removing & refixing old fittings & fixtures and for fixing of the fittings & fixtures with wooden packing pieces if necessary with screws, including one coat of approved primer on commercial ply surface etc.including removing existing damaged shutter,fittings and depositing at dept. stores etc. complete all as per specification & as directed by EIC. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

112.01 a) For Door 32 mm thick commercial ply on both sides Sqm Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

118 Supplying & fixing 10/18mm thick PVC integral free foam sheet in form of flush finish door shutter, manufactured by M/s. Jain Irrigation Systems Ltd. (Ex-cel sheet)/ M/s. Rajashree Plastiwood or other equivalent approved make of white colour, solid section, extruded rigid, light weight sheet with fine & homogeneous closed cell structure with smooth, glossy, hard surface finish on both sides, all edges to be smooth finish with mixture of PVC powder & solvent etc including dismantling the existing plywood/A.C sheet shutters, removing and refixing of architraves with necessary screws, stacking serviceable material and disposing off debris inside Anushaktinagar colony at the location identified by EIC etc. complete all as per specifications and as directed by the EIC. Note: The entire shutter shall be jointless shutter. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

119 Supplying & fixing matt finished, anodised aluminium heavy quality fittings, fixtures and fastenings of approved quality, along with CP brass screws, bolts and other accessories as per approved samples. complete all as per specifications and as directed by Engineer-in-charge 2 Construction of chamber for 100mm sluices valve item3 10 Nos

122 Supplying and fixing heavy duty superior quality fittings , fixtures and fasteners along with necessary CP screws, bolts, nuts, washers etc. as per approved samples. etc. complete all as directed by the E-I-C., 2 Construction of chamber for 100mm sluices valve item3 10 Nos

128 Labour Charges for cleaning, brooming, washing/mopping the vacant flats including disposing of waste materials including cost of cleaning materials like brooms, detergents/disinfectants etc complete all as directed by the Engineer-in- Charge. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

128.01 a) Upto Type III C including transit/efficiency flats each Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

144 Supplying and fixing following type of miscellaneous fittings, fixtures and fastenings of approved quality Stainless steel fittings and fixtures of M/s Shalimar hardware or approved equivalent along with necessary CP brass screws,bolts, nuts, washers and other standard accessories as per approved sample etc. complete all as directed by the Engineer-in-charge 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

145 Supplying & fixing heavy duty superior quality matt finished anodised (anodic coating not less than Grade AC10 as per IS 1868) ISI marked aluminium fittings and fixtures and fasteners along with necessary CP screws, bolts, nuts, washers etc. as per approved makes etc.complete all as directed by the Engineer-in-charge Note: A sample of each material listed should be got approved by Engineer-in-Charge before supply. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

145.04 Superior Quality Aluminium door stopper Floor type with heavy quality rubber bush fixed with screw, complete set. The weight of aluminium door stopper without rubber bush and screw shall not be less than 25 gms each. Each Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

146 Supplying & fixing matt finished, anodised aluminium heavy quality fittings, fixtures and fastenings of approved quality, along with CP brass screws, bolts and other accessories as per approved samples etc. complete all as per specifications and as directed by Engineer- in- Charge. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

146.01 a) Tower bolt 150 mm long with 10 mm dia. barrel. Each Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

154 Repairs to damaged RCC structural members at all locations/ floors using polymer modified cementatious mortar, for strengthening the existing RCC structural members using acrylic based polymer and comprising the following operations: 1. Breaking cracked / spalled concrete members along the cracks with plaster, including removing and stacking of all unserviceable material at site,simultaneous transportation and disposed at a location in Anushaktinagar as identified by EIC. complete all as per specifications and as directed by the Engineer-in Charge. 2. Exposing and cleaning the reinforcement thoroughly by light tapping / wire brushing of using strong emery paper and finally by acetone /rust remover of Dr. Fixit / Anuvi chemicals / Fosroc or other eqivalent. 3. Applying a coat of polymer and cement slurry in the ratio 1:1 by volume to the reinforcement bars. 4. Polymer required for the work shall be procured by the Agency from approved Manufacturers Like M/s Astra , M/s Anuvi, M/s Apcotex or other approved equivalent manufacturer confirming to technical requirements as below and the invoices/challans etc to be submitted to EIC for record. Appearance: Milky white Ph- value : 9-10 Specific gravity : 1.055+/-0.005 Solid contents(%w/w)-: 44+/-1 Viscocity at 25 degree C temperature (in sec): 15-20 Testing of the material as per relevant codes at NABL approved third party Lab. is to be done by the Agency for every batch/lot of supply. 5. Bond coat should be applied @ 0.37 ltr./layer/sq.m. 6. Minimum FM of silica sand should be 2.10 2 Construction of chamber for 100mm sluices valve item3 10 Nos

155 Reinforcement for reinforced cement concrete conforming to IS at all floors & levels including, supplying, cutting, bending, fixing and tying in position with 1.6 mm dia soft drawn annealed binding wire including cost of binding wire, labour etc. complete all as per specifications and as directed by the Engineer-in-Charge. Note: Binding wire required for the work shall be supplied by the contractor & the same will not be measured for payment. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

157 Cement plastering using factory manufactured pre mix/ready mix mortar in CM 1:4 of 'Roofit Mix'of M/s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd or other approved equivalent make, having minimum composition of C:S :: 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechnical mixing with water in a metalic tray only to make good consistency as per the specification of the Manufacturer and applied on internal wall and ceiling finished smooth with POP over brick walls or concrete surfaces at all floors and levels, including membrane curing by applying one coat of factory made curing compound Resikure of M/s Anuvi Chemicals, Concure of M/s fosroc, Dr. Fixit curing compound or other equivalent over repaired surfaces as per manufacturer's specification and removing existing damaged/ worn out plastering and disposing off debris inside Anushaktinagar colony at the location identified by EIC etc. complete all as per specifications and as directed by EIC. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

160 Providing and injecting chemical emulsion for post construction anti-termite treatment and creating a chemical barrier under all round walls, floors, wooden surfaces, junction of walls & floors, beams, columns etc. complete with using chloropyriphos 20 EC / Linden 20 E.C or approved equivalent termiticide emulsion conforming to IS and approved by the Insecticide Regulation Act Authority with proportion 1 part chemical and 19 part water or as per the manufacturer's specification and also the injecting chemical formulations should be as per I.S. 6313 part III 1971 specification and as approved by the insecticide Regulation Act. including drilling holes 12 mm dia 300 mm centre to centre or as close as possible and scaling the same hole after injection of the chemical emulsion with cement mortar 1:3, (1 part cement : 3 part cement ) without causing any damage to the materials like wooden furniture electric fittings and any other materials including spraying to the entire affected area with the same chemical formulation etc. complete all as per specifications and as directed by the Engineer in charge. NOTE :- 1.The inspection & anti-termite treatment shall be carried out in the affected premises for as many times as necessary for complete extermination of white ants. 2. Care should be taken by contractor to ensure that pets & human beings are not affected on account of the above treatment. 3. After satisfactory completion of anti- termite treatment the payment shall be made to contractor for the actual quantum of work done. 4. Appointment from the allottee to be taken before starting the treatment and the number of flats should be intimated for which appointment for the particular date is taken. 5. Above treatment shall be guaranteed for one (1) year from the date of compeltion of work. The guarantee shall be given on the regular format of the Department under Conditions of Contract. 6. Wherever treatment is required to be given to wood work doors etc. the chemical to be prepared in Kerosene instead of water all as per IS specification. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority:

Name of Work: Miscellaneous Civil, PH, Internal Painting & Electrical work in Vacant flats under TTM-III Unit At Anushaktinagar, Mumbai

Contract No: DCSEM/CQD/QSB/25-26/NIT/64 dt.09.01.2026

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

PART II - PUBLIC HEALTH WORKS 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

205 Providing & fixing approved quality wash basin of M/s Hindware or other approved equivalant in white glazed vitreous chinaware supported on suitable wall brackets and of size mentioned below, including providing & fixing Jaquar Cat No. 705/709 CP brass waste coupling, including cost of removing the existing wash basin and fittings such as piller cock, inlet connection, stop cock, waste coupling, bottle trap etc.depositing serviceable material at dept store & disposing of debrisinside Anushaktinagar colony at the location identified by EIC etc complete all as per specifications and as directed by the Engineer-in-Charge. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

206 Providing & fixing approved quality One piece EWC with Calibre premium Seat cover with Twin flushing system of M/s Cera Sanitary ware or other approved equivalant in Snow white glazed vitreous chinaware including all fixing accessories,white cement & including cost of removing the existing one & disposing of debris out side colony etc complete all as per specifications and as directed by the Engineer-in-Charge. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

209 Providing & fixing approved heavy quality 15 mm dia inlet connection with unions at the ends plastic pipes with brass unions including the cost of removing the existing one etc complete all as per specifications and as directed by the Engineer-in-Charge. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

211 Supplying & Fixing Stainless steel Sink of following size of approved make, moulded out of 19 SWG (1 mm ) stainless steel sheet of grade AISI 304 (18/8) with waste coupling conforming to IS 13983, placing and fixing the Sink in position to correct line and level with basket type choke-stop strainer, waste coupling , Check nuts etc. including the cost of jointing materials, finishing the edges with white / matching colour cement as per manufacturer's recommendation all complete, including cost of all etc. as per specification and as directed by the Engineer-in-charge. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

214 Providing & fixing in position approved quality CP brass Bib tap / Sink tap etc. of 15 mm nominal dia. with IS mark / approved make of following type including providing & fixing GI specials ,wall flanges and fixing to concealed / exposed CPVC / G.I.pipe line with leak proof threaded joints using spun yarn, white zinc etc., testing the joints, rectifying the leaky joints, if any, including cleaning etc. complete all as per specifications and as directed by Engineer- in- Charge. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

215 Providing & fixing in position 15 mm diameter CP brass Stop Cock / Angle cock confirming to IS / approved make fixing the cock in position with white zinc and spun yarn, testing the joints for leakage etc. all complete as per specifications and as directed by EIC 2 Construction of chamber for 100mm sluices valve item3 10 Nos

216 Providing & fixing in position following size Bottle Trap of Jaquar Cat. No. 769 with C.P brass extension piece to wall C.P brass wall flanges etc. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

217 Providing & fixing in position 15 mm diameter CP brass Pillar Cock conforming to IS/approved make fixing the cock in position with inlet connection using white zinc and spun yarn testing the joints for leakage etc. complete all as per specifications and as directed by EIC. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

218 Providing & fixing in position approved quality CP brass Wall mixer, 15 mm nominal dia. with IS mark and / approved make of following type including providing & fixing wall flanges and fixing to concealed / exposed water supply pipe line with leak proof threaded joints using spun yarn, white zinc etc., testing the joints for leakage all as per specifications and as directed by EIC. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

219 Providing & fixing in position CP Brass / Matt Chrome approved quality Shower of following type, fixing it to GI pipe line including jointing with white zinc and spun yarn etc., testing the joints etc all complete all as per specifications and as directed by the Engineer-in-Charge. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

221 Providing & fixing on Exposed or concealed surfaces the following dia Chlorinated Polyvinyl Chloride (C-PVC) pipe of specified class of M/s. SUPREME / PRINCE/ M/s. Jain Irrigation/M/s. Ajay pipes or other approved equivalent consisting following items of work:- i) Supplying & fixing C-PVC pipes, including necessary all fittings conforming to IS 15778 ii) Laying and fixing the pipe and specials on exposed or concealed surfaces to correct line, level and plumb for water supply line, overflow and vent using M.S. nails/screws, rawl plugs, wooden gutties and branded clamps of Supreme/Prince make to the pipeline as per the site requirement. iii) Testing the pipe line to a hydraulic pressure as per manufacturers cataglouge for leak proof joint or as per relavant code iv) Making leak proof threaded / solvent joints. including cutting the pipe, Joint preparartion, cleaning, marking, application of solvent, assembling, curing etc. and the cost of jointing cement solvent materials. v) Cutting or making hole or chases in RCC or brick work structure such as wall, column, beam, slab, chajja, dado etc. for passing the pipe line and reinstating all the damage to its original condition. proof joints. vi) Providing and fixing C-PVC jointable / threaded fittings such as Union, Nipples, Bendes, Elbows, Tees, Reducers, End caps, Couplers, Adaptors, Saddles, Plugs, Tank connectors, Expansion loops, Bypass bends, etc vii) including removing existing GI pipe line with fittings and specials etc. Note:- All brass threaded elbows and fittings shall be with additional support type of M/s. Prince, Supreme or other equivalent approved by EIC including necessary fixing arrangement such as screws, plug etc complete. SDR 11 Pipes and Fittings ( Mode of measurement :- The measurement shall per Unit RM length of pipe line laid or fixed. The measurement shall be taken along centre line of pipe. No measurement shall be recorded saperately for fittings etc. ) 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

222 Providing, laying, jointing, fixing & painting heavy quality (Class 'C') M.S. Galvanized pipes as per I.S. 1239-1968 including fittings like elbows, collars, tees, unions, couplings, reducers, enlargers, bends and all other fittings required for the completion except screwed flanges conforming to I.S. 1239-1968 & also as per the code of practice of water supply in bldgs. Of I.S. 2065-1972 including laying under floors, chasing, in walls, roof slabs and making good the same to the original conditions, including the cost of all jointing materials like hemp yarn, white or red lead, clamps, wooden gutties, screws, cement, sand etc. including painting the pipe with coats of synthetic enamel paint over a coat of Primer & wrapping hessian cloth in concealed portion including removing the old damaged G.I. Pipes & handing over to Deptt. Stores, scaffolding, testing the pipes etc. complete all as per specifications and as directions of the EIC. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

223 Supplying and fixing following size PVC-SWR pipes and Fittings for soil, waste,vent and rainwater pipe lines consisting following items of work:- i) Supplying PVC - SWR pipes and fittings conforming to IS 13592 of approved make and standard PVC clamps ( approx. 3.2 mm thick ) and nails or MS galvanised clamps having minimum 3 mm thick for fixing the pipe. ii) Fixing the pipeline vertically to plumb, keeping the pipe barrel 50 mm away from the wall face, using PVC or MS galvanised clamps Including scaffolding. iii) Providing and fixing PVC Domed roof outlet (grating ) for RWP & PVC cowl for waste / soil pipe. iv) Jointing the PVC pipes and specials by PVC solvent cement, rubber lubricant with rubber rings or any other approved equivalent method. v) Laying the pipeline below the ground to proper slope and gradient for making connection of soil and vent pipeline ( Vertical stacks ) with inspection chamber or manhole and waste water pipeline with gully trap chamber including the cost of cement mortar, water proofing compound etc., testing the vertical pipeline by smoke test and horizontal pipeline by 600 mm head of water and rectifying the leakages, if any all complete . vi) Cutting or making hole in RCC or brick work and reinstating the surface to it's original condition after passing the pipe with cement mortar / cement concrete etc. by adding approved water proofing compound. PVC - SWR Pipe & Fittings ( TYPE-B ) 2 Construction of chamber for 100mm sluices valve item3 10 Nos

223.01 a) 75 mm dia. RM Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

254 Providing & fixing approved heavy quality solid plastic seat and lid of white shade with C.P. brass pillar hinges conforming to IS 2548 and including cost of removing the existing one depositing to deptt. stores etc complete all as per specifications and as directed by the Engineer-in-Charge, 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

255 Providing and fixing universal Internal Kit of approved make for PVC flush tank (Syphon set + Ball Cock set+ Button Lever set) that fits most of the standard cisterns/flush tanks/ . The kit consists of a Syphon set the controls the outflow of the water, a ball cock set (adjustable) that controls the water inflow and filling of the tank, a lever set that controls the release of water. Made from heavy duty plastic etc. complete as per manufactures specification and as directed by EIC. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

256 Providing and fixing in position heavy pattern screw down gun metal Gate Valve conforming to IS:778 with hand wheels at top including testing for 10 Kg./ Sq.Cm. pressure with clean and potable water with a minimum testing duration of two hours etc including removing old gun metal Gate valve & returning to deptt stores etc complete all as per specifications and as directed by the Engineer in Charge. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

256.01 a) 15 mm dia. Each Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

257 Providing and Fixing cPVC Ball valve with S.S balls & Specials, if required of approved make suitablefor pipe pressure class, making water proof joints,for pipe pressure class, making water proof joints,ncluding cost of jointing material and cPVCspecials if required, testing the joints etc. completeas per directions of EIC.SDR-11 (IS 15778)-cPVC Ball Valve 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

258 Providing & fixing in position approved quality CP brass stop cock/angle cock/Bib tap / Sink tap etc. of 15 mm nominal dia. with IS mark / approved make of following type including providing & fixing GI specials ,wall flanges and fixing to concealed / exposed G.I.pipe line with leak proof threaded joints using spun yarn, white zinc etc., testing the joints, rectifying the leaky joints, if any, including cleaning etc. complete all as per specifications and as directed by Engineer- in- Charge. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority:

Name of Work: Miscellaneous Civil, PH, Internal Painting & Electrical work in Vacant flats under TTM-III Unit At Anushaktinagar, Mumbai

Contract No: DCSEM/CQD/QSB/25-26/NIT/64 dt. 09.01.2026

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

PART III - ELECTRICAL WORKS 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

301 Supply and fixing of the following materials required for maintenance a) Fan Accessories 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

301.01 Ceiling fan canopies Each Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

302 Instantaneous mini water heaters accessories 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

303 Switches/ sockets/ DP switches similar to CIVIC-XP of M/s. Vinay. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

304 Lamp Holder & 5" round PVC plate / Square Box Batten Holder / Angle holder / pendent holder/ ceiling rose 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

305 Switches/ sockets/ DP switches similar to Myrius series of M/s. Legrand make. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

305.03 6A , 2/3 pin socket with shutter,Myrius catalogue number(6730 44) Each Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

306 Plastic surface boxes similar to Myrius series of M/s. Legrand make with wood screws & nylon plug. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

307 White plate cover with frame similar to Myrius model of M/s Legrand 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

308 Switches/ sockets similar to Murano series of M/s. Crabtree make. 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

309 1.1 kV grade PVC insulated multi stranded copper wires 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

310 1.1 kV grade PVC insulated, FRLS PVC extruded outer sheath copper flexible cable of following sizes 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

311 MCB/MCCB/RCCB/RCBO, Metal plug & socket DB's 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

312 Ceiling fan of following sizes without fan regulator 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority:

Name of Work: Miscellaneous Civil, PH, Internal Painting & Electrical work in Vacant flats under TTM-III Unit At Anushaktinagar, Mumbai

Contract No DCSEM/CQD/QSB/25-26/NIT/64 dt.09.01.2026

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

4 Part III - Rebate Items 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

400 Rebate for taking away dismanteled item by the contractor…… 2 Construction of chamber for 100mm sluices valve item3 10 Nos

401 a) Teak wood Kg Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

404 d) CP brass PH items like bib tap, pillar cock, stop cock, …… 2 Construction of chamber for 100mm sluices valve item3 10 Nos

405 e) GI Pipes 2 Construction of chamber for 100mm sluices valve item3 10 Nos

f) replacement of CI & PVC pipes 2 Construction of chamber for 100mm sluices valve item3 10 Nos

407 g) GM gate valves up to 50 mm dia. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Please Enable Macros to View BoQ information